RESUMEN
The MONITOOL project (2017-2023) was carried out to describe the relationships between total dissolved and labile metal concentrations measured in spot water samples and in concurrently deployed Diffusive Gradients in Thin-films (DGTs) passive samplers, respectively. The ultimate aim was to adapt existing marine metal Environmental Quality Standards (EQS marine water) for DGTs, enabling their use in the context of the European Directives (the Water Framework Directive (WFD) and the Marine Strategy Framework Directive (MSFD)). Time-integrated metal concentrations provided by DGTs, representing several days, are an advantage compared to conventional spot sampling, especially in highly dynamic systems, such as transitional waters. Hence, the MONITOOL project aimed to provide a robust database of dissolved and labile metal concentrations in transitional and coastal waters, based upon co-deployments of DGTs and collection of spot water samples at several sampling sites (England, France, Ireland, Italy, Northern Ireland, Portugal, Scotland and Spain), followed subsequently by DGT and water metal analysis. Samplings were carried out in 2018 and 2022, following agreed protocols developed in the framework of the project. The MONITOOL dataset includes metal concentrations from DGTs, measured with Inductively Coupled Plasma Mass Spectrometry (ICP-MS: Cd, Co, Cu, Fe, Mn, Ni, Pb, Zn) and in concurrently collected spot water samples by ICP-MS (Al, Cd, Co, Cu, Mn, Ni, Pb, Zn) and Anodic/Cathodic Stripping Voltammetry (ASV/CSV: Cd, Pb, Ni). Moreover, data on seawater physical-chemical parameters (salinity, temperature, dissolved oxygen, pH, turbidity, total suspended solids, dissolved organic carbon, and total organic carbon) is provided. This database presents the results obtained using, concurrently, different forms of sampling and analytical techniques, enabling the comparison of the results obtained by these strategies and allowing the adaptation of EQS in marine water (EQS marine water) to DGTs (EQS DGT), in the context of the WFD. Moreover, due to the large number of sampling sites, it could also be used for other types of research, such as those dealing with metal speciation or the determination of baseline levels.
RESUMEN
Assessment of the effects of sediment metal contamination on biological assemblages and function remains a key question in marine management, especially in relation to disposal activities. However, the appropriate description of bioavailable metal concentrations within pore-waters has rarely been reported. Here, metal behaviour and availability at contaminated dredged material disposal sites within UK waters were investigated using Diffusive Gradient in Thin films (DGT). Three stations, representing contrasting history and presence of dredge disposal were studied. Depth profiles of five metals were derived using DGT probes as well as discrete analysis of total metal concentrations from sliced cores. The metals analysed were: iron and manganese, both relevant to sediment biogeochemistry; cadmium, nickel and lead, classified as priority pollutants. DGT time-integrated labile flux profiles of the metals display behaviour consistent with increasingly reduced conditions at depth and availability to DGT (iron and manganese), subsurface peaks and a potential sedimentary source to the water column related to the disposal activity (lead and nickel) and release to pore-water linked to decomposition of enriched phytodetritus (cadmium). DGT data has the potential to improve our current understanding of metal behaviour at impacted sites and is suitable as a monitoring tool. DGT data can provide information on metal availability and fluxes within the sediment at high depth-resolution (5mm steps). Differences observed in the resulting profiles between DGT and conventional total metal analysis illustrates the significance of considering both total metals and a potentially labile fraction. The study outcomes can help to inform and improve future disposal site impact assessment, and could be complemented with techniques such as Sediment Profile Imagery for improved biologically relevance, spatial coverage and cost-effective monitoring and sampling of dredge material disposal sites. Additionally, the application of this technology could help improve correlative work on biological impacts under national and international auspices when linking biological effects to more biologically relevant metal concentrations.
RESUMEN
The North-East Atlantic porbeagle (Lamna nasus) population has declined dramatically over the last few decades and is currently classified as 'Critically Endangered'. As long-lived, apex predators, they may be vulnerable to bioaccumulation of contaminants. In this study organohalogen compounds and trace elements were analysed in 12 specimens caught as incidental bycatch in commercial gillnet fisheries in the Celtic Sea in 2011. Levels of organohalogen contaminants were low or undetectable (summed CB and BDE concentrations 0.04-0.85 mg kg(-1)wet weight). A notably high Cd concentration (7.2 mg kg(-1)wet weight) was observed in one mature male, whereas the range observed in the other samples was much lower (0.04-0.26 mg kg(-1)wet weight). Hg and Pb concentrations were detected only in single animals, at 0.34 and 0.08 mg kg(-1)wet weight, respectively. These contaminant levels were low in comparison to other published studies for shark species.
Asunto(s)
Halógenos/análisis , Tiburones/metabolismo , Oligoelementos/análisis , Contaminantes Químicos del Agua/análisis , Animales , Cadmio/análisis , Ecosistema , Monitoreo del Ambiente , Femenino , Explotaciones Pesqueras , Plomo/análisis , Masculino , Mercurio/análisis , Níquel/análisis , Compuestos Orgánicos/análisis , Bifenilos Policlorados/análisis , Alimentos Marinos/análisisRESUMEN
The reaction of [V(Np-tolyl)Cl3] with the sulfur-bridged diphenol ligand 2,2'-thiobis(4,6-di-tert-butylphenol), {2,2'-S[4,6-(t-Bu)2C6H2OH]2} (LSH2) afforded the complexes [V(LS)2] (1) and [VOCl3(MeCN)2][H3Np-tolyl] (2). Complex 2 could also be prepared directly from [V(Np-tolyl)Cl3] and 'wet' acetonitrile. Reaction of [V(Np-tolyl)(Ot-Bu)3] with LSH2 afforded [VO(mu2-OH)(LS)]2 x 6(MeCN) (3), whilst reaction of [VO(On-Pr)3] with 2,2'-sulfinylbis(4,6-di-tert-butylphenol), {2,2'-SO2[4,6-(t-Bu)2C6H2OH]2} (LSO2H2), afforded [V(LSO2)2] x MeCN (4). The reaction of [VO(Oi-Pr)3] with the ethylidene-bridged diphenol 2,2'-ethylidenebis(4,6-di-tert-butylphenol), {2,2'-CH3CH[4,6-(t-Bu)2C6H2OH]2} (LH2) afforded the hydroxyl bridged complexes [(VOL)2(mu2-OH)(mu2-Oi-Pr)] (5) (major product) and [VO(mu2-OH)(L)]2 x 4(MeCN) (6) (minor product). In general, we find that controlled hydrolysis of [V(NAr)(On-Pr)3] (Ar = p-ClC6H4, p-OCNC6H4 or p-tolyl) in the presence of LH2 reproducibly led to the vanadyl complex [VO(mu-On-Pr)L]2 x 2(MeCN) (7), in which the n-propoxide bridges both unexpectedly lie above the V2O2 plane. Reaction of the linear triphenol 2,6-bis(3,5-di-tert-butyl-2-hydroxybenzyl)-4-tert-butylphenol, [ArCH2Ar(1)CH2Ar] (Ar = 4,6-di-tert-butylphenol; Ar()1 = 4-tert-butylphenol) (L(1)H3), and [VO(On-Pr)3] afforded the complex [VOL(1)]2 x 3(MeCN) (8), whilst reaction of [V(Np-tolyl)(Oi-Pr)3] with the related methylene-bridged linear triphenol 2,6-bis(3,5-di-tert-butyl-2-hydroxybenzyl)-4-methylphenol, [ArCH2Ar(2)CH2Ar] (L(2)H3) (Ar(2) = 4-methylphenol), gave {[V(mu2-O)(Np-tolyl)][VO(Oi-Pr)]L(2)}2 x 1.5(MeCN) (9). The crystal structures of 1 to 9 are reported. Complexes 1-4 and 7-9 were screened as pro-catalysts for the polymerisation of ethylene in the presence of the co-catalyst dimethylaluminium chloride (DMAC) and the re-activator ethyltrichloroacetate (ETA). All are highly active ethylene polymerisation catalysts with activities covering the range 2000 to 90,000 g mmol(-1) h(-1) bar(-1), and these results are discussed in terms of the ligands present at vanadium in the pro-catalyst. Complex 3 has also been screened for ethylene/propylene copolymerisation.
RESUMEN
Reaction of [V(X)(OR)3] (X=O, Np-tolyl; R=Et, nPr or tBu) with p-tert-butylhexahomotrioxacalix[3]areneH3, LH3, affords the air-stable complexes [{V(X)L}n] (X=O, n=1 (1); X=Np-tolyl, n=2 (2)). Alternatively, 1 is readily available either from interaction of [V(mes)3THF] with LH3, and subsequent oxidation with O2 or upon reaction of LLi3 with [VOCl3]. Reaction of [V(Np-tolyl)(OtBu)3] with 1,3-dimethylether-p-tert-butylcalix[4]areneH2, Cax(OMe)2(OH)2, afforded [{VO(OtBu)}2(mu-O)Cax(OMe)2(O)2].2 MeCN (42 MeCN), in which two vanadium atoms are bound to just one calix[4]arene ligand; the n-propoxide analogue of 4, namely [{VO(OnPr)}2(mu-O)Cax(OMe)2(O)2].1.5 MeCN (51.5 MeCN), has also been isolated from a similar reaction using [V(O)(OnPr)3]. Reaction of [VOCl3], LiOtBu, (Me3Si)2O and Cax(OMe)2(OH)2 gave [{VO(OtBu)Cax(OMe)2(O)2}2Li4O2].8 MeCN (68 MeCN), in which an Li4O4 cube (two of the oxygen atoms are derived from the calixarene ligands) is sandwiched between two Cax(OMe)2(O)2. The reaction between [V(Np-tolyl)(OtBu)3] and Cax(OMe)2(OH)2, afforded [V(Np-tolyl)(OtBu)2Cax(OMe)2(O)(OH)]5 MeCN (75 MeCN), in which two tert-butoxide groups remain bound to the tetrahedral vanadium atom, which itself is bound to the calix[4]arene through only one phenolic oxygen atom. Reaction of p-tert-butylcalix[4]areneH4, Cax(OH)4 and [V(Np-tolyl)(OnPr)3] led to loss of the imido group and formation of the dimeric complex [{VCax(O)4(NCMe)}2].6 MeCN (86 MeCN). Monomeric vanadyl oxo- and imidocalix[4]arene complexes [V(X)Cax(O)3(OMe)(NCMe)] (X=O (11), Np-tolyl (12)) were obtained by the reaction of the methylether-p-tert-butylcalix[4]areneH3, Cax(OMe)(OH)3, and [V(X)(OR)3] (R=Et or nPr). Vanadyl calix[4]arene fragments can be linked by the reaction of 2,6-bis(bromomethyl)pyridine with Cax(OH)4 and subsequent treatment with [VOCl3] to afford the complex [{VOCax(O)4}2(mu-2,6-(CH2)2C5H3N)].4 MeCN (134 MeCN). The compounds 1-13 have been structurally characterised by single-crystal X-ray diffraction. Upon activation with methylaluminoxane, these complexes displayed poor activities, however, the use of dimethylaluminium chloride and the reactivator ethyltrichloroacetate generates highly active, thermally stable catalysts for the conversion of ethylene to, at 25 degrees C, ultra-high-molecular-weight (>5, 500,000), linear polyethylene, whilst at higher temperature (80 degrees C), the molecular weight of the polyethylene drops to about 450,000. Using 1 and 2 at 25 degrees C for ethylene/propylene co-polymerisation (50:50 feed) leads to ultra-high-molecular-weight (>2,900,000) polymer with about 14.5 mol% propylene incorporation. The catalytic systems employing the methyleneoxa-bridged complexes 1 and 2 are an order of magnitude more active than the bimetallic complexes 5 and 13, which, in turn, are an order of magnitude more active than pro-catalysts 8, 11 and 12. These differences in activity are discussed in terms of the structures of each class of complex.
RESUMEN
Vanadyl procatalysts bearing chelating aryloxide ligands are found to polymerise ethylene, in the presence of dimethylaluminium chloride, with (for this metal) exceptionally high activities.