Spray-Flame Synthesis of NASICON-Type Rhombohedral (α) Li1+xYxZr2-x(PO4)3 [x = 0-0.2] Solid Electrolytes.

Since solid electrolytes have a broad electrochemical stability window, are exceptionally electrochemically stable against Li metal, and function as a physical separator to prevent dendrite growth, they are at the forefront of alternate possibilities, further increasing the stability and energy density of Li-ion batteries. NASICON-type electrolytes are a promising candidate due to their negligible moisture sensitivity, which results in outstanding stability and a lower probability of Li2CO3 passivity under the ambient atmosphere. However, one of the most promising representatives, Li1+xYxZr2-x(PO4)3 (LYZP), has multiple stable phases with significant variation in their corresponding Li-ion conductivity. In this paper, we have successfully synthesized the highly ionically conductive rhombohedral phase of LYZP via spray-flame synthesis. Two different solvent mixtures (e.g., 2-ethyl hexanoic acid/ethanol, propanol/propanoic acid) were chosen to explore the effect of precursor composition and combustion enthalpy on the phase composition of the nanoparticle. The as-synthesized nanoparticles from spray-flame synthesis consisted of the crystalline tetragonal zirconia (t-ZrO2) phase, while lithium, yttrium, and phosphate were present on the nanoparticles' surface as amorphous phases. However, a short annealing step (1 h) was sufficient to obtain the NASICON phase. Moreover, we have shown the gradual phase conversion from orthorhombic ß phase to rhombohedral α phase as the annealing temperature increased from 700 °C to 1300 °C (complete removal of ß phase). In this context, Y3+ doping was also crucial, along with the appropriate solvent mixture and annealing temperature, for obtaining the much-desired rhombohedral α phase. Further, 0.2 at% Y3+ doping was added to the solvent mixture of 2-ethyl hexanoic acid/ethanol, and annealing at 1300 °C for 1 h resulted in a high ionic conductivity of 1.14∙10-5 S cm-1.

Titania/graphene nanocomposites from scalable gas-phase synthesis for high-capacity and high-stability sodium-ion battery anodes.

In sodium-ion batteries (SIBs), TiO2or sodium titanates are discussed as cost-effective anode material. The use of ultrafine TiO2particles overcomes the effect of intrinsically low electronic and ionic conductivity that otherwise limits the electrochemical performance and thus its Na-ion storage capacity. Especially, TiO2nanoparticles integrated in a highly conductive, large surface-area, and stable graphene matrix can achieve an exceptional electrochemical rate performance, durability, and increase in capacity. We report the direct and scalable gas-phase synthesis of TiO2and graphene and their subsequent self-assembly to produce TiO2/graphene nanocomposites (TiO2/Gr). Transmission electron microscopy shows that the TiO2nanoparticles are uniformly distributed on the surface of the graphene nanosheets. TiO2/Gr nanocomposites with graphene loadings of 20 and 30 wt% were tested as anode in SIBs. With the outstanding electronic conductivity enhancement and a synergistic Na-ion storage effect at the interface of TiO2nanoparticles and graphene, nanocomposites with 30 wt% graphene exhibited particularly good electrochemical performance with a reversible capacity of 281 mAh g-1at 0.1 C, compared to pristine TiO2nanoparticles (155 mAh g-1). Moreover, the composite showed excellent high-rate performance of 158 mAh g-1at 20 C and a reversible capacity of 154 mAh g-1after 500 cycles at 10 C. Cyclic voltammetry showed that the Na-ion storage is dominated by surface and TiO2/Gr interface processes rather than slow, diffusion-controlled intercalation, explaining its outstanding rate performance. The synthesis route of these high-performing nanocomposites provides a highly promising strategy for the scalable production of advanced nanomaterials for SIBs.

Spray-Flame Synthesis of LaFexCo1-xO3 (x = 0.2, 0.3) Perovskite Nanoparticles for Oxygen Evolution Reaction in Water Splitting: Effect of Precursor Chemistry (Acetates and Nitrates).

The product properties of mixed oxide nanoparticles generated via spray-flame synthesis depend on an intricate interplay of solvent and precursor chemistries in the processed solution. The effect of two different sets of metal precursors, acetates and nitrates, dissolved in a mixture of ethanol (35 Vol.%) and 2-ethylhexanoic acid (2-EHA, 65 Vol.%) was investigated for the synthesis of LaFexCo1-xO3 (x = 0.2, 0.3) perovskites. Regardless of the set of precursors, similar particle-size distributions (dp = 8-11 nm) were obtained and a few particles with sizes above 20 nm were identified with transmission electron microscopy (TEM) measurements. Using acetates as precursors, inhomogeneous La, Fe, and Co elemental distributions were obtained for all particle sizes according to energy dispersive X-ray (EDX) mappings, connected to the formation of multiple secondary phases such as oxygen-deficient La3(FexCo1-x)3O8 brownmillerite or La4(FexCo1-x)3O10 Ruddlesden-Popper (RP) structures besides the main trigonal perovskite phase. For samples synthesized from nitrates, inhomogeneous elemental distributions were observed for large particles only where La and Fe enrichment occurred in combination with the formation of a secondary La2(FexCo1-x)O4 RP phase. Such variations can be attributed to reactions in the solution prior to injection in the flame as well as precursor-dependent variations in in-flame reactions. Therefore, the precursor solutions were analyzed by temperature-dependent attenuated total reflection Fourier-transform infrared (ATR-FTIR) measurements. The acetate-based precursor solutions indicated the partial conversion of, mainly La and Fe, acetates to metal 2-ethylhexanoates. In the nitrate-based solutions, esterification of ethanol and 2-EHA played the most important role. The synthesized nanoparticle samples were characterized by BET (Brunauer, Emmett, Teller), FTIR, Mössbauer, and X-ray photoelectron spectroscopy (XPS). All samples were tested as oxygen evolution reaction (OER) catalysts, and similar electrocatalytic activities were recorded when evaluating the potential required to reach 10 mA/cm2 current density (∼1.61 V vs reversible hydrogen electrode (RHE)).

Ozonation of carbamazepine in the presence of sulfur-dopped graphene: Effect of process parameters and formation of main transformation products.

The stability of graphene structure in sulfur-doped graphene catalyst is demonstrated to be a key aspect during the ozonation process. Enhancing the stability of the sulfur-doped graphene structure is therefore important to improve its catalytic activity during the ozonation process. However, this has remained a challenge so far. Therefore, we adopted a low-energy microwave plasma technique to synthesize a high purity sulfur-doped graphene (S ⎯ Gr) catalyst for the ozonation process. The effect of S ⎯ Gr in the ozonation process was tested using carbamazepine (CBZ; 0.05 mM) as a probe compound. A complete CBZ removal was obtained at an ozone concentration of 0.08 mM while in comparison with single O3, ∼1.5 and 2.5 times decrease in the formation of the two important intermediate transformation products i.e., BQM (1-(2-benzaldehyde) - 4-hydroxy (1H, 3H)-quinazoline-2-one) and BQD (1-(2-benzaldehyde) - (1H, 3H)-quinazoline-2, 4-dione) was observed. Radical scavenging experiments confirmed the formation of HO. The XPS results showed that the activity of S ⎯ Gr towards the formation of HO was positively related to S-bearing carbon atoms at the edge of the graphene structure. Therefore, the addition of S ⎯ Gr is directly linked with the formation of HO, which further contributed to the improved elimination of intermediate transformation products. With a low sulfur loss of 1 %, the microwave plasma synthesized S ⎯ Gr catalyst remained stable during ozonation, implying its feasibility in practical application.

Ceramic-in-Polymer Hybrid Electrolytes with Enhanced Electrochemical Performance.

Polymer electrolytes are attractive candidates to boost the application of rechargeable lithium metal batteries. Single-ion conducting polymers may reduce polarization and lithium dendrite growth, though these materials could be mechanically overly rigid, thus requiring ion mobilizers such as organic solvents to foster transport of Li ions. An inhomogeneous mobilizer distribution and occurrence of preferential Li transport pathways eventually yield favored spots for Li plating, thereby imposing additional mechanical stress and even premature cell short circuits. In this work, we explored ceramic-in-polymer hybrid electrolytes consisting of polymer blends of single-ion conducting polymer and PVdF-HFP, including EC/PC as swelling agents and silane-functionalized LATP particles. The hybrid electrolyte features an oxide-rich layer that notably stabilizes the interphase toward Li metal, enabling single-side lithium deposition for over 700 h at a current density of 0.1 mA cm-2. The incorporated oxide particles significantly reduce the natural solvent uptake from 140 to 38 wt % despite maintaining reasonably high ionic conductivities. Its electrochemical performance was evaluated in LiNi0.6Co0.2Mn0.2O2 (NMC622)||Li metal cells, exhibiting impressive capacity retention over 300 cycles. Notably, very thin LiNbO3 coating of the cathode material further boosts the cycling stability, resulting in an overall capacity retention of 78% over more than 600 cycles, clearly highlighting the potential of hybrid electrolyte concepts.

Liquid-Phase Cyclohexene Oxidation with O2 over Spray-Flame-Synthesized La1-x Srx CoO3 Perovskite Nanoparticles.

La1-x Srx CoO3 (x=0, 0.1, 0.2, 0.3, 0.4) nanoparticles were prepared by spray-flame synthesis and applied in the liquid-phase oxidation of cyclohexene with molecular O2 as oxidant under mild conditions. The catalysts were systematically characterized by state-of-the-art techniques. With increasing Sr content, the concentration of surface oxygen vacancy defects increases, which is beneficial for cyclohexene oxidation, but the surface concentration of less active Co2+ was also increased. However, Co2+ cations have a superior activity towards peroxide decomposition, which also plays an important role in cyclohexene oxidation. A Sr doping of 20 at. % was found to be the optimum in terms of activity and product selectivity. The catalyst also showed excellent reusability over three catalytic runs; this can be attributed to its highly stable particle size and morphology. Kinetic investigations revealed first-order reaction kinetics for temperatures between 60 and 100 °C and an apparent activation energy of 68 kJ mol-1 for cyclohexene oxidation. Moreover, the reaction was not affected by the applied O2 pressure in the range from 10 to 20 bar. In situ attenuated total reflection infrared spectroscopy was used to monitor the conversion of cyclohexene and the formation of reaction products including the key intermediate cyclohex-2-ene-1-hydroperoxide; spin trap electron paramagnetic resonance spectroscopy provided strong evidence for a radical reaction pathway by identifying the cyclohexenyl alkoxyl radical.

Spray Flame Synthesis (SFS) of Lithium Lanthanum Zirconate (LLZO) Solid Electrolyte.

A spray-flame reaction step followed by a short 1-h sintering step under O2 atmosphere was used to synthesize nanocrystalline cubic Al-doped Li7La3Zr2O12 (LLZO). The as-synthesized nanoparticles from spray-flame synthesis consisted of the crystalline La2Zr2O7 (LZO) pyrochlore phase while Li was present on the nanoparticles' surface as amorphous carbonate. However, a short annealing step was sufficient to obtain phase pure cubic LLZO. To investigate whether the initial mixing of all cations is mandatory for synthesizing nanoparticulate cubic LLZO, we also synthesized Li free LZO and subsequently added different solid Li precursors before the annealing step. The resulting materials were all tetragonal LLZO (I41/acd) instead of the intended cubic phase, suggesting that an intimate intermixing of the Li precursor during the spray-flame synthesis is mandatory to form a nanoscale product. Based on these results, we propose a model to describe the spray-flame based synthesis process, considering the precipitation of LZO and the subsequent condensation of lithium carbonate on the particles' surface.

Towards a framework for evaluating and reporting Hansen solubility parameters: applications to particle dispersions.

A thorough understanding of complex interactions within particulate systems is a key for knowledge-based formulations. Hansen solubility parameters (HSP) are widely used to assess the compatibility of the dispersed phase with the continuous phase. At present, the determination of HSP is often based on a liquid ranking list obtained by evaluating a pertinent dispersion parameter using only one pre-selected characterization method. Furthermore, one cannot rule out the possibility of subjective judgment especially for liquids for which it is difficult to decipher the compatibility or underlying interactions. As a result, the end value of HSP might be of little or no information. To overcome these issues, we introduce a generalized and technology-agnostic combinatorics-based procedure. We discuss the principles of the procedure and the implications of evaluating and reporting particle HSP values. We demonstrate the procedure by using SiN x particles synthesized in the gas phase. We leverage the analytical centrifugation data to evaluate stability trajectories of SiN x dispersions in various liquids to deduce particle-liquid compatibility.

Towards Mechanistic Understanding of Liquid-Phase Cinnamyl Alcohol Oxidation with tert-Butyl Hydroperoxide over Noble-Metal-Free LaCo1-x Fex O3 Perovskites.

Noble-metal-free perovskite oxides are promising and well-known catalysts for high-temperature gas-phase oxidation reactions, but their application in selective oxidation reactions in the liquid phase has rarely been studied. We report the liquid-phase oxidation of cinnamyl alcohol over spray-flame synthesized LaCo1-x Fex O3 perovskite nanoparticles with tert-butyl hydroperoxide (TBHP) as the oxidizing agent under mild reaction conditions. The catalysts were characterized by XRD, BET, EDS and elemental analysis. LaCo0.8 Fe0.2 O3 showed the best catalytic properties indicating a synergistic effect between cobalt and iron. The catalysts were found to be stable against metal leaching as proven by hot filtration, and the observed slight deactivation is presumably due to segregation as determined by EDS. Kinetic studies revealed an apparent activation energy of 63.6 kJ mol-1 . Combining kinetic findings with TBHP decomposition as well as control experiments revealed a complex reaction network.

Microwave plasma-assisted silicon nanoparticles: cytotoxic, molecular, and numerical responses against cancer cells.

Silicon nanoparticles (SiNPs), which have a special place in material science due to their strong luminescent property and wide applicability in various physicochemical arenas, such as solar cells and LEDs, were synthesised by a microwave plasma-assisted process using an argon-silane mixture. Several characterization tools were applied to check the crystallinity (XRD) and morphological (FESEM, TEM, ∼20 ± 2 nm size) and topographical (AFM, ∼20 nm) details of the NPs. The high-purity SiNPs were applied on myoblast cancer cells to investigate the reactivity of the NPs at different doses (200, 1000 and 2000 ng mL-1) for different incubation periods (24 h, 48 h & 72 h). The MTT assay was utilized to determine the percentage of viable and non-viable cells, while the cell organization was observed via microscopy and CLSM. Additionally, the molecular responses (RT-PCR), such as apoptosis, were analyzed in presence of caspase 3 and 7, and the results showed an upregulation with SiNPs. To validate the obtained data, analytical studies were also performed for the SiNPs via statistical analysis and the most reliable data values were evaluated and acceptable as per the ICH guidelines.

Intra- and inter-nanocrystal charge transport in nanocrystal films.

The exploitation of semiconductor nanocrystal (NC) films in novel electronic and optoelectronic applications requires a better understanding of charge transport in these systems. Here, we develop a model of charge transport in NC films, based on a generalization of the concept of transport energy level ET to nanocrystal assemblies, which considers both intra- and inter-NC charge transfer processes. We conclude that the role played by each of these processes can be probed from temperature-dependent measurements of charge carrier density n and mobility µ in the same films. The model also enables the determination of the position of the Fermi energy level EF with respect to ET, an important parameter of charge transport in semiconductor materials, from the temperature dependence of n. Moreover, we provide support to an essentially temperature-independent intra-NC charge carrier mobility, considered in the transport level concept, and consequently the frequently observed temperature dependence of the overall mobility µ in NC films results from a temperature variation of the inter-NC charge transport processes. Importantly, we also conclude that the temperature dependence of conductivity in NC films should result in general from a combination of temperature variations of both n and µ. By applying the model to solution-processed Si NC films, we conclude that transport within each NC is similar to that in amorphous Si (a-Si), with charges hopping along band tail states located below the conduction band edge. For Si NCs, we obtain values of ET - EF of ∼0.25 eV. The overall mobility µ in Si NC films is significantly further reduced with respect to that typically found in a-Si due to the additional transport constraints imposed by inter-NC transfer processes inherent to a nanoparticulate film. Our model accounting for inter- and intra-NC charge transport processes provides a simple and more general description of charge transport that can be broadly applied to films of semiconductor NCs.

Electrostatic Self-Assembly Enabling Integrated Bulk and Interfacial Sodium Storage in 3D Titania-Graphene Hybrid.

Room-temperature sodium-ion batteries have attracted increased attention for energy storage due to the natural abundance of sodium. However, it remains a huge challenge to develop versatile electrode materials with favorable properties, which requires smart structure design and good mechanistic understanding. Herein, we reported a general and scalable approach to synthesize three-dimensional (3D) titania-graphene hybrid via electrostatic-interaction-induced self-assembly. Synchrotron X-ray probe, transmission electron microscopy, and computational modeling revealed that the strong interaction between titania and graphene through comparably strong van der Waals forces not only facilitates bulk Na+ intercalation but also enhances the interfacial sodium storage. As a result, the titania-graphene hybrid exhibits exceptional long-term cycle stability up to 5000 cycles, and ultrahigh rate capability up to 20 C for sodium storage. Furthermore, density function theory calculation indicated that the interfacial Li+, K+, Mg2+, and Al3+ storage can be enhanced as well. The proposed general strategy opens up new avenues to create versatile materials for advanced battery systems.

Parasitic Reactions in Nanosized Silicon Anodes for Lithium-Ion Batteries.

When designing nano-Si electrodes for lithium-ion batteries, the detrimental effect of the c-Li15Si4 phase formed upon full lithiation is often a concern. In this study, Si nanoparticles with controlled particle sizes and morphology were synthesized, and parasitic reactions of the metastable c-Li15Si4 phase with the nonaqueous electrolyte was investigated. The use of smaller Si nanoparticles (∼60 nm) and the addition of fluoroethylene carbonate additive played decisive roles in the parasitic reactions such that the c-Li15Si4 phase could disappear at the end of lithiation. This suppression of c-Li15Si4 improved the cycle life of the nano-Si electrodes but with a little loss of specific capacity. In addition, the characteristic c-Li15Si4 peak in the differential capacity (dQ/dV) plots can be used as an early-stage indicator of cell capacity fade during cycling. Our findings can contribute to the design guidelines of Si electrodes and allow us to quantify another factor to the performance of the Si electrodes.

Novel back-reflector architecture with nanoparticle based buried light-scattering microstructures for improved solar cell performance.

A new back-reflector architecture for light-management in thin-film solar cells is proposed that includes a morphologically smooth top surface with light-scattering microstructures buried within. The microstructures are pyramid shaped, fabricated on a planar reflector using TiO2 nanoparticles and subsequently covered with a layer of Si nanoparticles to obtain a flattened top surface, thus enabling growth of good quality thin-film solar cells. The optical properties of this back-reflector show high broadband haze parameter and wide angular distribution of diffuse light-scattering. The n-i-p amorphous silicon thin-film solar cells grown on such a back-reflector show enhanced light absorption resulting in improved external quantum efficiency. The benefit of the light trapping in those solar cells is evidenced by the gains in short-circuit current density and efficiency up to 15.6% and 19.3% respectively, compared to the reference flat solar cells. This improvement in the current generation in the solar cells grown on the flat-topped (buried pyramid) back-reflector is observed even when the irradiation takes place at large oblique angles of incidence. Finite-difference-time-domain simulation results of optical absorption and ideal short-circuit current density values agree well with the experimental findings. The proposed approach uses a low cost and simple fabrication technique and allows effective light manipulation by utilizing the optical properties of micro-scale structures and nanoscale constituent particles.

Impact of Ambient Pressure on Titania Nanoparticle Formation During Spray-Flame Synthesis.

Nanocrystalline titania was synthesized via liquid-fed spray-flame synthesis in a hermetically closed system at various pressures. Titanium tetraisopropoxide dissolved in isopropanol was used as precursor. The size, crystal structure, degree of agglomeration, morphology and the band gap of the as-prepared particles were investigated ex situ by nitrogen adsorption, transmission electron microscopy, X-ray diffraction, and UV-VIS absorption spectroscopy. In comparison to synthesis at atmospheric pressure it was found that decreasing pressure has a significant influence on the particle size distribution leading to smaller particles with reduced geometric standard deviation while particle morphology and crystal structure are not affected. Computational fluid dynamics simulations support the experimental findings also indicating a significant decrease in particle size at reduced pressure. Although it is well known that decreasing pressure leads to smaller particle sizes, it is (to our knowledge) the first time that this relation was investigated for spray-flame synthesis.

Resonant electronic coupling enabled by small molecules in nanocrystal solids.

The future exploitation of the exceptional properties of nanocrystal (NC) thin films deposited from liquid dispersions of nanoparticles relies upon our ability to produce films with improved electrical properties by simple and inexpensive means. Here, we demonstrate that the electronic conduction of solution-processed NC films can be strongly enhanced without the need of postdeposition treatments, via specific molecules adsorbed at the surfaces of adjacent NCs. This effect is demonstrated for Si NC films doped with the strong molecular oxidizing agent tetrafluoro-tetracyanoquinodimethane (F4-TCNQ). Density functional calculations were carried out with molecule-doped superlattice solid models. It is shown that, when populated by electrons, hybrid molecule/NC states edge (and may actually resonate with) the conduction-band states of the NC solid. This provides extra electronic connectivity across the NC network as the molecules effectively flatten the electronic potential barriers for electron transfer across the otherwise vacuum-filled network interstitialcies.

Nanocrystalline silicon: lattice dynamics and enhanced thermoelectric properties.

Silicon has several advantages when compared to other thermoelectric materials, but until recently it was not used for thermoelectric applications due to its high thermal conductivity, 156 W K(-1) m(-1) at room temperature. Nanostructuration as means to decrease thermal transport through enhanced phonon scattering has been a subject of many studies. In this work we have evaluated the effects of nanostructuration on the lattice dynamics of bulk nanocrystalline doped silicon. The samples were prepared by gas phase synthesis, followed by current and pressure assisted sintering. The heat capacity, density of phonons states, and elastic constants were measured, which all reveal a significant, ≈25%, reduction in the speed of sound. The samples present a significantly decreased lattice thermal conductivity, ≈25 W K(-1) m(-1), which, combined with a very high carrier mobility, results in a dimensionless figure of merit with a competitive value that peaks at ZT≈ 0.57 at 973 °C. Due to its easily scalable and extremely low-cost production process, nanocrystalline Si prepared by gas phase synthesis followed by sintering could become the material of choice for high temperature thermoelectric generators.

Monodisperse titania microspheres via controlled nanoparticle aggregation.

This paper describes the fabrication of highly monodisperse TiO(2) nanoparticle aggregates (NPAs) by controlled aggregation of nanoparticles in a water-in-oil emulsion. Equally sized drops containing a titanium dioxide nanoparticle suspension are produced in a T-channel device. This procedure has a high tuning potential. Increasing the velocity of the titania suspension phase leads to an enlargement of the droplets, while raising the velocity of the oil phase reduces the drop diameter. The technique enables the preparation of monodisperse (<2%) drops between 150 and 400 µm in diameter. Evaporation of the suspension medium leads to nanoparticle aggregates. There is no significant change in dispersity from emulsion drops to NPAs, if the drying is carried out slowly.

Stabilization of mid-sized silicon nanoparticles by functionalization with acrylic acid.

We present an enhanced method to form stable dispersions of medium-sized silicon nanoparticles for solar cell applications by thermally induced grafting of acrylic acid to the nanoparticle surface. In order to confirm their covalent attachment on the silicon nanoparticles and to assess the quality of the functionalization, X-ray photoelectron spectroscopy and diffuse reflectance infrared Fourier spectroscopy measurements were carried out. The stability of the dispersion was elucidated by dynamic light scattering and Zeta-potential measurements, showing no sign of degradation for months.

Comparison of micro- and nanoscale Fe⁺³-containing (Hematite) particles for their toxicological properties in human lung cells in vitro.

The specific properties of nanoscale particles, large surface-to-mass ratios and highly reactive surfaces, have increased their commercial application in many fields. However, the same properties are also important for the interaction and bioaccumulation of the nonbiodegradable nanoscale particles in a biological system and are a cause for concern. Hematite (α-Fe2O3), being a mineral form of Fe(III) oxide, is one of the most used iron oxides besides magnetite. The aim of our study was the characterization and comparison of biophysical reactivity and toxicological effects of α-Fe2O3 nano- (d < 100 nm) and microscale (d < 5 µm) particles in human lung cells. Our study demonstrates that the surface reactivity of nanoscale α-Fe2O3 differs from that of microscale particles with respect to the state of agglomeration, radical formation potential, and cellular toxicity. The presence of proteins in culture medium and agglomeration were found to affect the catalytic properties of the hematite nano- and microscale particles. Both the nano- and microscale α-Fe2O3 particles were actively taken up by human lung cells in vitro, although they were not found in the nuclei and mitochondria. Significant genotoxic effects were only found at very high particle concentrations (> 50 µg/ml). The nanoscale particles were slightly more potent in causing cyto- and genotoxicity as compared with their microscale counterparts. Both types of particles induced intracellular generation of reactive oxygen species. This study underlines that α-Fe2O3 nanoscale particles trigger different toxicological reaction pathways than microscale particles. However, the immediate environment of the particles (biomolecules, physiological properties of medium) modulates their toxicity on the basis of agglomeration rather than their actual size.