RESUMEN
Rational chemical substitution is an effective way to regulate structure and enrich property. Herein, a new noncentrosymmetric borosilicate, Ba2ScBSi2O9, was successfully synthesized by substituting CaO6 units in Ba2CaB2Si4O14 with ScO6 octahedra, with comparatively strong covalency. This substitution not only effectively prevents polymerization of the B-O groups, resulting in an intriguing structural transformation from tetrahedral-coordinated borosilicate of Ba2CaB2Si4O14 to mixed-coordinated borosilicate Ba2ScBSi2O9, but also enhances its second harmonic generation response (2 × KDP), that is nearly four times higher than its parent structure while keeping a short ultraviolet (UV) cutoff edge (λcutoff < 190 nm). In addition, the polar space group of Pca21 for Ba2ScBSi2O9 achieves its ferroelectric polarization reversal capability, which makes quasi-phase-matching technology possible to counteract the nonphase-matching caused by small birefringence of silicates. This work indicates the unique role of heterovalent substitution in regulating structure and performance, providing new insights for exploring borosilicate with versatile functionality.
RESUMEN
Nonlinear optical (NLO) coherent light sources are widely applied in many areas of science and technology. As the core medium, the NLO material is required to have a wide transparent range, a large NLO response, and a high laser damaged threshold (LDT). It is common knowledge that langasite (La3Ga5SiO14, LGS) crystal has an underdeveloped second-harmonic generation (SHG) coefficient and a small birefringence, which seriously restrict its application in the NLO field, despite that it has a broad transmittance spectrum and a moderate LDT. Herein, we have successfully obtained novel langasite NLO crystals LGSS (La3Ga5Si0.5Sn0.5O14) and LGGS (La3Ga5Ge0.5Sn0.5O14), with short UV absorption edges of 209 and 212 nm, respectively. Incorporating heavy ions Sn4+ into the structure, a distorted BO6 octahedron was adjusted by the radius difference between Sn4+ and Si4+/Ge4+, which caused the strong SHG responses in LGSS (â¼10.77 × KDP) and LGGS (â¼9.23 × KDP) and increased birefringences of 0.034 and 0.025, respectively. Besides, they also had large energy band gaps (4.95 eV for LGSS, and 4.93 eV for LGGS), which allowed high LDTs with LGSS of 1.3 GW/cm2 and LGGS of 813 MW/cm2. This work demonstrates a new strategy to enhance SHG responses and birefringence for existing NLO materials and enriches langasite family crystals.
RESUMEN
Achieving the extreme balance of the key performance requirements is the crucial to breakthrough the application bottleneck for nonlinear optical (NLO) materials. Herein, by assembly of the π-conjugated [B3O6] functional species with the aid of structure-directing property of mer-isomer [YO3F3] octahedra, a new ultraviolet (UV) NLO material, Cs2YB3O6F2 with aligned arrangement of coplanar [B3O6] groups has been synthesized. The polar material exhibits the rare coexistence of the largest second harmonic generation response of 5.6×KDP, the largest birefringence of 0.091 at 532â nm, the shortest Type I phase-matching down to 200.5â nm and deep-ultraviolet transparency among reported acentric rare-earth borates with [B3O6] groups. Remarkably, benefiting from the enhanced bonding force among functional units [B3O6], a firm three-dimensional framework is constructed, which facilitates the growth of large crystals. This can be proved by a block shape crystal with dimensional of 6×5×4â mm3, indicating that it was a promising UV NLO crystal. This work provides a powerful strategy to design UV NLO materials with good performances.
RESUMEN
Divalent lanthanide inorganic compounds can exhibit unique electronic configurations and physicochemical properties, yet their synthesis remains a great challenge because of the weak chemical stability. To the best of our knowledge, although several lanthanide monoxides epitaxial thin films have been reported, there is no chemically stable crystalline divalent lanthanide chalcogenide synthesized up to now. Herein, by using octahedra coupling tetrahedra single/double chains to construct an octahedral crystal field, we synthesized the stable crystalline La(II)-chalcogenide, LaMg6Ga6S16. The nature of the divalent La2+ cations can be identified by X-ray photoelectron spectroscopy, X-ray absorption near-edge structure and electron paramagnetic resonance, while the stability is confirmed by the differential thermal scanning, in-situ variable-temperature powder X-ray diffraction and a series of solid-state reactions. Owing to the particular electronic characteristics of La2+(5d1), LaMg6Ga6S16 displays an ultrabroad-band green emission at 500 nm, which is the inaugural instance of La(II)-based compounds demonstrating luminescent properties. Furthermore, as LaMg6Ga6S16 crystallizes in the non-centrosymmetric space group, P-6, it is the second-harmonic generation (SHG) active, possessing a comparable SHG response with classical AgGaS2. In consideration of its wider band gap (Eg = 3.0 eV) and higher laser-induced damage threshold (5×AgGaS2), LaMg6Ga6S16 is also a promising nonlinear optical material.
RESUMEN
Two new congruently melting Pb-containing halogen silicates, Pb3[O10Pb20](SiO4)4X10 (X = Cl, Br), have been synthesized using a high-temperature solution method. Their crystal structures were determined by single-crystal X-ray diffraction, and both compounds crystallize in the orthorhombic space group Cmca. In both structures, the mirror-symmetric bilayer composed of Pb-O polyhedra is observed for the first time in Pb-containing silicates and belongs to α-PbO derivatives and is related to the Aurivillius phase. Thermal behavior analysis, UV-vis diffuse-reflectance spectroscopy, and IR spectroscopy were also performed. The Pb3[O10Pb20](SiO4)4Cl10 matrix was doped with Eu3+ ions as a dopant, and its potential application in fluorescence was confirmed from the resulting orange-red emission.
RESUMEN
Non-centrosymmetric (NCS) and polar materials capable of exhibiting many important functional properties are indispensable for electro-optical technologies, yet their rational structural design remains a significant challenge. Here, we report a "group grafting" strategy for designing the first multi-chromophore selenophosphate, Cs3In(In4Se7)(P2Se6), that crystallizes in a NCS and polar space group of Cm. The structure features a unique basic building unit (BBU) [In(In4Se10)(P2Se6)], formed through "grafting [In4Se10] supertetrahedra on the root of [In(P2Se6)2] groups". Theoretical calculations confirm that this [In(In4Se10)(P2Se6)] BBU can achieve a "1+1>2" combination of properties from two chromophores, [In4Se10] supertetrahedron and ethane-like [P2Se6] dimer. That makes Cs3In(In4Se7)(P2Se6) exhibit excellent linear and nonlinear optical (NLO) properties, including a strong second harmonic generation (SHG) response (~6×AgGaS2), a large band gap (2.45â eV), broad infrared (IR) transmission (up to 19.5â µm), a significant birefringence (0.26 @1064â nm) as well as the congruently-melting property at ~700 °C. Therefore, Cs3In(In4Se7)(P2Se6) will be a promising NLO crystal, especially in the IR region, and this research also demonstrates that "group grafting" will be an effective strategy for constructing novel polar BBUs with multi-chromophore to design NCS structures and high-performance IR NLO materials.
RESUMEN
Introducing F- anions or substituting F- anions with IO3- groups has been proven to be ideal strategies for designing novel noncentrosymmetric (NCS) and polar materials, yet systematic investigation into the effect of F- anions or the substitution of IO3- for F- anions on structures and properties remains rarely explored. Herein, two new gallium iodates, NaGa(IO3)2F2 (1) and NaGa(IO3)4 (2), were successfully designed and synthesized based on NaGa(IO3)3F by introducing more F- anions and replacing F- anions with IO3 groups, respectively. Structurally, in compound 1, the adjacent [GaF3(IO3)3]3- polyanions are connected in an antiparallel manner, resulting in a complete cancellation of local polarity. While in compound 2, all IO3 groups in 2D [Ga(IO3)4]∞- layers are aligned, leading to large macroscopic polarization. Additionally, chemical substitution also results in a qualitative improvement in the functional properties of compound 2. It possesses strong SHG response (12 × KDP @1064 nm) and broad optical transparency, coupled with large birefringence (0.21 @1064 nm), showcasing its promise as a promising nonlinear optical (NLO) crystal. The effects of chemical substitution between F- anions and IO3- groups on the structures and properties are discussed in detail.
RESUMEN
Nonlinear optical (NLO) crystals are indispensable for the solid-state lasers for their ability to expand wavelength spectral to the regions where the directing lasing is difficult or even impossible, yet the rational design of a high-performance NLO crystal remains a great challenge owing to the severe structural and properties' requirements. Herein, a new noncentrosymmetric (NCS) and polar gallium iodate, LiGa(IO3 )4 , with a novel 2D anionic layer, is successfully designed and synthesized by the aliovalent substitution strategy based on classic α-LiIO3 . The 2D [Ga(IO3 )4 ]∞ - layer in LiGa(IO3 )4 is built from the GaO6 octahedra and highly polarizable units IO3 . Compared with its parent compound, the partial replacement of A-site Li+ cation with main group Ga3+ cation facilitates LiGa(IO3 )4 to possess excellent NLO properties, including the large second-harmonic generation (SHG) response (14 × KH2 PO4 (KDP) @ 1064 nm), wide bandgap (4.25 eV), large birefringence (0.23 @ 1064 nm), and wide optical transparency from UV to mid-IR. These reveal that LiGa(IO3 )4 will be a promising NLO crystal.
RESUMEN
Chirality and polarity are the two most important and representative symmetry-dependent properties. For polar structures, all the twofold axes perpendicular to the principal axis of symmetry should be removed. For chiral structures, all the mirror-related symmetries and inversion axes should be removed. Especially for duality (polarity and chirality), all of the above symmetries should be broken and that also represents the highest-level challenge. Herein, a new symmetry-breaking strategy that employs heteroanionic groups to construct hourglass-like [Sr3 OGeS3 ]2+ and [Sr3 SGeS3 ]2+ groups to design and synthesize a new oxychalcogenide Sr18 Ge9 O5 S31 with chiral-polar duality is proposed. The presence of two enantiomers of Sr18 Ge9 O5 S31 is confirmed by the single-crystal X-ray diffraction. Its optical activity and ferroelectricity are also studied by solid-state circular dichroism spectroscopy and piezoresponse force microscopy, respectively. Further property measurements show that Sr18 Ge9 O5 S31 possesses excellent nonlinear optical properties, including the strong second harmonic generation efficiency (≈2.5 × AGS), large bandgap (3.61 eV), and wide mid-infrared transparent region (≈15.3 µm). These indicate that the unique microstructure groups of heteroanionic materials are conducive to realizing symmetry-breaking and are able to provide some inspiration for exploring the chiral-polar duality materials.
RESUMEN
The seasonal rainforests distributed across the tropical karst hills of south China are of high biodiversity conservation value and serve many important ecosystem functions. However, knowledge surrounding distribution patterns of woody plants in tropical karst hills remains limited. In this study, we surveyed the distribution of families, genera and species of woody flora at four slope positions (depression, lower slope, middle slope, and upper slope), and analyzed the influence of topographic and soil variables on the distribution of woody plants in the tropical karst hills of south China. Forty forest plots (each 20 m × 20 m) contained 306 species of woody plants with a diameter at breast height (DBH) ≥1 cm, representing 187 genera and 66 families. As slope increased, the number of families increased slowly, and the number of genera and species followed a concave-shaped trend, with the lowest number of genera and species in the lower slope position. Differences in species composition were significantly stronger between slope positions than within slope positions. The topographic and soil variables explained 22.4% and 19.6%, respectively, of the distribution of woody plants, with slope position, slope degree, soil potassium and soil water content as the most significant variables. The results of generalized linear mixed model analysis showed that total R2 of fixed effects on variation of woody species richness was 0.498, and rock outcrop rate and soil total phosphorus were the best fitting effects. Our results help to explain the community assembly mechanism and to inform management and protection strategies for species-rich seasonal rainforests in the karst area.
Asunto(s)
Biodiversidad , Ecosistema , Humanos , Plantas , China , SueloRESUMEN
Background and aim: Melasma (ML), naevus fusco-caeruleus zygomaticus (NZ), freckles (FC), cafe-au-lait spots (CS), nevus of ota (NO), and lentigo simplex (LS), are common skin diseases causing hyperpigmentation. Deep learning algorithms learn the inherent laws and representation levels of sample data and can analyze the internal details of the image and classify it objectively to be used for image diagnosis. However, deep learning algorithms that can assist clinicians in diagnosing skin hyperpigmentation conditions are lacking. Methods: The optimal deep-learning image recognition algorithm was explored for the auxiliary diagnosis of hyperpigmented skin disease. Pretrained models, such as VGG-19, GoogLeNet, InceptionV3, ResNet50V2, ResNet101V2, ResNet152V2, InceptionResNetV2, DesseNet201, MobileNet, and NASNetMobile were used to classify images of six common hyperpigmented skin diseases. The best deep learning algorithm for developing an online clinical diagnosis system was selected by using accuracy and area under curve (AUC) as evaluation indicators. Results: In this research, the parameters of the above-mentioned ten deep learning algorithms were 18333510, 5979702, 21815078, 23577094, 42638854, 58343942, 54345958, 18333510, 3235014, and 4276058, respectively, and their training time was 380, 162, 199, 188, 315, 511, 471, 697, 101, and 144 min respectively. The respective accuracies of the training set were 85.94%, 99.72%, 99.61%, 99.52%, 99.52%, 98.84%, 99.61%, 99.13%, 99.52%, and 99.61%. The accuracy rates of the test set data were 73.28%, 57.40%, 70.04%, 71.48%, 68.23%, 71.11%, 71.84%, 73.28%, 70.39%, and 43.68%, respectively. Finally, the areas of AUC curves were 0.93, 0.86, 0.93, 0.91, 0.91, 0.92, 0.93, 0.92, 0.93, and 0.82, respectively. Conclusions: The experimental parameters, training time, accuracy, and AUC of the above models suggest that MobileNet provides a good clinical application prospect in the auxiliary diagnosis of hyperpigmented skin.
RESUMEN
To properly repair and maintain implants, which are bone tissue implants that replace natural tooth roots, it is crucial to accurately identify their brand and specification. Deep learning has demonstrated outstanding capabilities in analysis, such as image identification and classification, by learning the inherent rules and degrees of representation of data models. The purpose of this study is to evaluate deep learning algorithms and their supporting application software for their ability to recognize and categorize three dimensional (3D) Cone Beam Computed Tomography (CBCT) images of dental implants. By using CBCT technology, the 3D imaging data of 27 implants of various sizes and brands were obtained. Following manual processing, the data were transformed into a data set that had 13,500 two-dimensional data. Nine deep learning algorithms including GoogleNet, InceptionResNetV2, InceptionV3, ResNet50, ResNet50V2, ResNet101, ResNet101V2, ResNet152 and ResNet152V2 were used to perform the data. Accuracy rates, confusion matrix, ROC curve, AUC, number of model parameters and training times were used to assess the efficacy of these algorithms. These 9 deep learning algorithms achieved training accuracy rates of 100%, 99.3%, 89.3%, 99.2%, 99.1%, 99.5%, 99.4%, 99.5%, 98.9%, test accuracy rates of 98.3%, 97.5%, 94.8%, 85.4%, 92.5%, 80.7%, 93.6%, 93.2%, 99.3%, area under the curve (AUC) values of 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00. When used to identify implants, all nine algorithms perform satisfactorily, with ResNet152V2 achieving the highest test accuracy, classification accuracy, confusion matrix area under the curve, and receiver operating characteristic curve area under the curve area. The results showed that the ResNet152V2 has the best classification effect on identifying implants. The artificial intelligence identification system and application software based on this algorithm can efficiently and accurately identify the brands and specifications of 27 classified implants through processed 3D CBCT images in vitro, with high stability and low recognition cost.
Asunto(s)
Inteligencia Artificial , Aprendizaje Profundo , Algoritmos , Tomografía Computarizada de Haz Cónico/métodos , Programas InformáticosRESUMEN
BACKGROUND: CD24+CK19+/CD24+SOX9+ resident liver cells are activated and expanded after chronic liver injury in a ductular reaction. However, the sources and functions of these cells in liver damage remain disputed. RESULTS: The current study combined genetic lineage tracing with in vitro small-molecule-based reprogramming to define liver progenitor cells (LPCs) derived from hepatic parenchymal and non-parenchymal tissues. tdTom+ hepatocytes were isolated from ROSA26tdTomato mice following AAV8-Tbg-Cre-mediated recombination, EpCAM+ biliary epithelial cells (BECs) from wild-type intrahepatic bile ducts and ALB/GFP-EpCAM- cells were isolated from AlbCreERT/R26GFP mice. A cocktail of small molecules was used to convert the isolated cells into LPCs. These in vitro cultured LPCs with CD24 and SOX9 expression regained the ability to proliferate. Transcriptional profiling showed that the in-vitro cultured LPCs derived from the resident LPCs in non-parenchymal tissues expressed Lipocalin-2 (Lcn2) at high levels. Accordingly, endogenous Cd24a+Lcn2+ LPCs were identified by integration of sc-RNA-sequencing and pathological datasets of liver dysfunction which indicates that LPCs produced by ductular reactions might also originate from the resident LPCs. Transplantation of in-vitro cultured Cd24a+Lcn2+ LPCs into CCl4-induced fibrotic livers exacerbated liver damage and dysfunction, possibly due to LCN2-dependent macrophage inflammatory response. CONCLUSIONS: CD24+LCN2+ LPCs constituted the expanding ductular reaction and contributed to macrophage-mediated inflammation in chronic liver damage. The current findings highlight the roles of LPCs from distinct origins and expose the possibility of targeting LPCs in the treatment of chronic hepatic diseases.
RESUMEN
The simultaneous removal of toxic, carcinogenic organic dyes and metal ions from water by one material offers significant advantages when fast, facile, and robust water purification is required. Ionic covalent organic frameworks (ICOFs) have the combined properties of COFs and ion exchange resins and are expected to achieve simultaneous capture of heavy metal ions and organic dyes from water. Herein, a novel guanidinium-based ICOF was synthesized using a solvothermal method. Benefitting from the cationic character, porosity and nanoscale pore size of ICOFs, the adsorbent exhibited high simultaneous adsorption capacities of 290 mg g-1 and 158 mg g-1 for methyl orange (MO) and Cr(vi), respectively, and retained more than 90% adsorption capacity after six adsorption-desorption cycles. In addition, based on dual control of size-exclusion and charge-selection, precisely selective adsorption is achieved towards diverse mixed anionic and cationic pollutants. This strategy offers a practical solution for COFs to confront environmental pollution issues.
RESUMEN
BACKGROUND: Genomic three-dimensional (3D) spatial organization plays a key role in shaping gene expression and associated chromatin modification, and it is highly sensitive to environmental stress conditions. In microalgae, exposure to nitrogen stress can drive lipid accumulation, yet the associated functional alterations in the spatial organization of the microalgal genome have yet to be effectively characterized. RESULTS: Accordingly, the present study employed RNA-seq, Hi-C, and ChIP-seq approaches to explore the relationship between 3D chromosomal architecture and gene expression during lipid accumulation in the marine microalga Nannochloropsis oceanica in response to nitrogen deprivation (ND). These analyses revealed that ND resulted in various changes in chromosomal organization, including A/B compartment transitions, topologically associating domain (TAD) shifts, and the disruption of short-range interactions. Significantly higher levels of gene expression were evident in A compartments and TAD boundary regions relative to B compartments and TAD interior regions, consistent with observed histone modification enrichment in these areas. ND-induced differentially expressed genes (DEGs) were notably enriched in altered TAD-associated regions and regions exhibiting differential genomic contact. These DEGs were subjected to Gene Ontology (GO) term analyses that indicated they were enriched in the 'fatty acid metabolism', 'response to stress', 'carbon fixation' and 'photosynthesis' functional categories, in line with the ND treatment conditions used to conduct this study. These data indicate that Nannochloropsis cells exhibit a clear association between chromatin organization and transcriptional activity under nitrogen stress conditions. Pronounced and extensive histone modifications were evident in response to ND. Observed changes in chromatin architecture were linked to shifts in histone modifications and gene expression. CONCLUSIONS: Overall, the reprogramming of many lipid metabolism-associated genes was evident under nitrogen stress conditions with respect to both histone modifications and chromosomal organization. Together these results revealed that higher-order chromatin architecture represents a new layer that can guide efforts to understand the transcriptional regulation of lipid metabolism in nitrogen-deprived microalgae.
RESUMEN
Salt-inclusion chalcogenides (SICs) have been receiving widespread attention due to their large second harmonic generation (SHG) responses and wide bandgaps, however most of them suffer from small birefringence limiting their technical application. Herein, by introducing the π-conjugated (S2 )2- units in the ionic guest of salt-inclusion structure, the first disulfide-bond-containing SIC, [Ba4 (S2 )][ZnGa4 S10 ] has been synthesized. It exhibits the widest bandgap up to 3.39 eV among polychalcogenides and strong SHG response as large as that of AgGaS2 (AGS). Importantly, its birefringence reaches a max value of 0.053@1064 nm among AGS-like SICs, indicating it is a promising IR nonlinear optical (NLO) material. Theoretical calculations reveal that the π-conjugated (S2 )2- units and covalent GaS layers favor the enhanced birefringence and large SHG response. This work provides not only a new type of SIC for the first time, but also new lights on the design of IR NLO materials.
RESUMEN
Deep-ultraviolet nonlinear optical (DUV NLO) crystals are indispensable for solid-state lasers to produce coherent light with wavelengths shorter than 200 nm, yet their structure design still faces great challenges because two groups of conflicting properties must be satisfied simultaneously, i.e., "large second harmonic generation (SHG) response-large band gap" and "large birefringence-weak growth anisotropy". Clearly, hitherto, no crystal can perfectly satisfy these properties, including KBe2BO3F2. Herein, we design a new mixed-coordinated borophosphate Cs3[(BOP)2(B3O7)3] (CBPO) by optimizing the matching of cation and anion groups, which unprecedentedly achieves a balance for two groups of contradictions concurrently for the first time. In the structure of CBPO, it has the coplanar and π-conjugated B3O7 groups, which can make it possess a large SHG response (3 × KDP) and large birefringence (0.075@532 nm). Then, terminal O atoms of these B3O7 groups are connected by BO4 and PO4 tetrahedra, which eliminates all dangling bonds and blue shifts the UV absorption edge to the DUV region (165 nm). More importantly, owing to the judicious selection of cations, the size of cations and void of anion groups is a perfect match, which makes CBPO possess a very stable three-dimensional anion framework and thus reduces the crystal growth anisotropy. A CBPO single crystal with a size of up to 20 × 17 × 8 mm3 has been successfully grown, through which a DUV coherent light has also been achieved in Be-free DUV NLO crystals for the first time. These indicate CBPO will be the next generation of DUV NLO crystals.
RESUMEN
Inorganic phosphates are of great interest, because of their rich structural chemistry and multiple functional properties. Compared with the phosphates that only contain the solely condensed P-O groups, the phosphates with various condensed P-O groups are less reported, especially for the noncentrosymmetric (NCS) ones. Here, two new bismuth phosphates, Na6Sr2Bi3(PO4)(P2O7)4 and Cs2CaBi2(PO4)2(P2O7), were synthesized by the solid-state reaction and both structures contain two types of isolated P-O groups. Remarkably, Na6Sr2Bi3(PO4)(P2O7)4 crystallizes in the tetragonal space group P4Ì 21c, which represents the first NCS bismuth phosphate with PO4 and P2O7 groups. Detailed structural comparisons among Bi3+-containing alkali/alkaline-earth metal phosphates show that the ratios of cations/phosphorus profoundly influence the condensed degree of P-O groups. Ultraviolet-visible-near-infrared (UV-vis-NIR) diffusion spectra show that both compounds have the relatively short UV cutoff edges. And Na6Sr2Bi3(PO4)(P2O7)4 has a second-harmonic generation response of 1.1 × KDP. The first-principles calculations are carried out to understand the structure-performance relationship.
RESUMEN
A new non-centrosymmetric (NCS) chalcohalide, [Sr4Cl2][Ge3S9], was successfully designed and synthesized through combining chemical tailoring with aliovalent substitution strategies from the maternal [NaSr4Cl][Ge3S10]. It can exhibit a large SHG effect (0.97 × AgGaS2), a wide band gap of 3.71 eV, and a high LDT (â¼16 × AgGaS2). These results indicate that [Sr4Cl2][Ge3S9] may be a potential infrared nonlinear optical crystal.
RESUMEN
Nonlinear optical (NLO) crystals assume an irreplaceable role in the development of laser science and technologies, yet the reasonable design of a high-performance NLO crystal remains difficult owing to the unpredictability of inorganic structures. In this research, we report the fourth polymorph of KMoO3(IO3), i.e., δ-KMoO3(IO3), to understand the effect of different packing patterns of basic building units on structures and properties. Among four polymorphs of KMoO3(IO3), the different stacking patterns of Λ-shaped cis-MoO4(IO3)2 units result in α- and ß-KMoO3(IO3) featuring nonpolar layered structures, whereas γ- and δ-KMoO3(IO3) display polar frameworks. Theoretical calculations and structure analysis reveal that IO3 units can be regarded as the main source of its polarization in δ-KMoO3(IO3). Further property measurements show that δ-KMoO3(IO3) exhibits a large second-harmonic generation response (6.6 × KDP), a wide band gap (3.34 eV), and a broad mid-infrared transparency region (â¼10 µm), which demonstrates that adjusting the arrangement of the Λ-shaped basic building units is an effective approach for rationally designing NLO crystals.