Surgical outcomes of major vascular resection for retroperitoneal liposarcoma from a high­volume sarcoma center: a propensity score matching analysis.

PURPOSE: Radical resection of retroperitoneal liposarcoma (RLPS) may necessitate vascular resection and reconstruction. The study was conducted to assess surgical outcomes of surgery for RLPS with major vascular involvement. METHODS: Patients with RLPS who underwent surgical resection at the Sarcoma Center of Peking University Cancer Hospital between April 2011 and December 2022 were identified from a prospectively maintained database. Patients were classified into two groups: vascular resection and non-vascular resection groups. A propensity score matching analysis was performed to eliminate baseline differences between the groups. Surgical details and postoperative outcomes were analyzed. Furthermore, prognostic factors for local recurrence-free survival (LRFS) and overall survival (OS) were assessed. RESULTS: Overall, 199 patients were identified and the median follow-up period was 48 (interquartile range [IQR] 45-69) months. Vascular resection was performed in 42 (21%) patients, 25 of whom had vascular infiltration. A total of 39 patients had vascular replacement and 3 patients underwent partial resection (side-wall resection). Vascular resection was burdened by higher rates of major morbidity (38% vs. 14%, p < 0.001) and 30-day mortality (7.1% vs. 1.3%, p = 0.005). After propensity-matched analysis, patients who underwent vascular resection had 5-year LRFS and OS rates comparable to those without vascular involvement. Major vascular resection was not an independent risk factor for LRFS or OS. CONCLUSIONS: Although accompanied by increased risks of major morbidity and mortality, the major vascular resection enabled radical resection in patients with advanced RLPS, affording comparable 5-year LRFS and OS rates compared to those who did not.

Comparison of Fusion Rate and Clinical Outcomes in Minimally Invasive and Conventional Posterior Fusion for Lumbar Degenerative Disease: A Network Meta-Analysis.

BACKGROUND: The fusion rate, clinical efficacy, and complications of minimally invasive fusion surgery and open fusion surgery in the treatment of lumbar degenerative disease are still unclear. METHODS: We conducted a literature search using PubMed, Embase, Cochrane Library, CNKI, and WANFANG databases. RESULTS: This study included 38 retrospective studies involving 3097 patients. Five intervention modalities were considered: unilateral biportal endoscopic-lumbar interbody fusion (UBE-LIF), percutaneous endoscopic-lumbar interbody fusion (PE-LIF), minimally invasive-transforaminal lumbar interbody fusion (MIS-TLIF), transforaminal lumbar interbody fusion (TLIF), and posterior lumbar interbody fusion (PLIF). Quality assessment indicated that each study met acceptable quality standards. PE-LIF demonstrated reduced low back pain (Odds Ratio = 0.50, Confidence Interval: 0.38-0.65) and lower complication rate (Odds Ratio = 0.46, Confidence Interval: 0.25-0.87) compared to PLIF. However, in indirect comparisons, PE-LIF showed the lowest fusion rates, with the ranking as follows: UBE-LIF (83.2%) > MIS-TLIF (59.6%) > TLIF (44.3%) > PLIF (39.8%) > PE-LIF (23.1%). With respect to low back pain relief, PE-LIF yielded the best results, with the order of relief as follows: PE-LIF (96.4%) > MIS-TLIF (64.8%) > UBE-LIF (62.6%) > TLIF (23.0%) > PLIF (3.2%). Global and local consistency tests showed satisfactory results, and heterogeneity tests indicated good stability. CONCLUSIONS: Compared to conventional open surgery, minimally invasive fusion surgery offered better scores for low back pain and Oswestry Disability Index, lower complication rates, reduced bleeding, and shorter hospital stays. However, minimally invasive fusion surgery did not show a significant advantage in terms of fusion rate and had a longer operative time.

High-density mapping of durable and broad-spectrum stripe rust resistance gene Yr30 in wheat.

KEY MESSAGE: The durable stripe rust resistance gene Yr30 was fine-mapped to a 610-kb region in which five candidate genes were identified by expression analysis and sequence polymorphisms. The emergence of genetically diverse and more aggressive races of Puccinia striiformis f. sp. tritici (Pst) in the past twenty years has resulted in global stripe rust outbreaks and the rapid breakdown of resistance genes. Yr30 is an adult plant resistance (APR) gene with broad-spectrum effectiveness and its durability. Here, we fine-mapped the YR30 locus to a 0.52-cM interval using 1629 individuals derived from residual heterozygous F5:6 plants in a Yaco"S"/Mingxian169 recombinant inbred line population. This interval corresponded to a 610-kb region in the International Wheat Genome Sequencing Consortium (IWGSC) RefSeq version 2.1 on chromosome arm 3BS harboring 30 high-confidence genes. Five genes were identified as candidate genes based on functional annotation, expression analysis by RNA-seq and sequence polymorphisms between cultivars with and without Yr30 based on resequencing. Haplotype analysis of the target region identified six haplotypes (YR30_h1-YR30_h6) in a panel of 1215 wheat accessions based on the 660K feature genotyping array. Lines with YR30_h6 displayed more resistance to stripe rust than the other five haplotypes. Near-isogenic lines (NILs) with Yr30 showed a 32.94% higher grain yield than susceptible counterparts when grown in a stripe rust nursery, whereas there was no difference in grain yield under rust-free conditions. These results lay a foundation for map-based cloning Yr30.

Aerosol in global oceanic regions: Four-decade trends, spatial patterns, and policy implications.

High aerosol loadings are observed not only in megacities on continents but also in oceanic regions like the Bohai Sea. This work provides a comprehensive analysis of the spatial and temporal variations in Aerosol Optical Depth (AOD) across different ocean regions worldwide over the past four decades, using remote sensing reanalysis data. The mean AOD value across all oceanic grids is approximately 0.112, with higher levels recorded in the Central Atlantic (~0.206), followed by the North Indian Ocean (~0.201), and the Western North Pacific (~0.197). A latitudinal analysis reveals that high AOD values are predominantly found in the Northern Hemisphere's oceanic regions, especially between latitudes 0° and 70° N. Except for the Gulf of California and Hudson Bay, AOD values in the other fourteen surveyed inland seas surpass the mean levels found at similar latitudes in oceanic regions. Among which, the Bohai Sea stands out as the most polluted oceanic region with AOD value of 0.35. Over the last four decades, AOD trends have revealed a significant decrease across about 89.5 % of global oceanic grids, while an increase in AOD is observed in low-latitude oceanic areas (30° S-30° N). Investigation into inland seas shows that nearly two-thirds have experienced a declining AOD trend, while sharply upward trends in AOD are primarily found in Asia. The Bohai Sea shows the largest increase in AOD, with an annual growth rate of 1.4 %. The turning-points of the AOD in each inland sea confirm the success of regional emission control policies initiated on the adjacent continents. To improve air quality in inland seas like the Bohai Sea, adjusting industrial layouts, such as relocating heavy industries from the surrounding coastal cities' proximities to areas near open seas, could significantly benefit public health.

Absolute quantification methods for Prostate-Specific antigen by Isotope-Dilution mass spectrometry.

Prostate-specific antigen (PSA) is a diagnostic marker for prostate cancer; however, because it is a macromolecular glycoprotein with complex and diverse isoforms, it is difficult to standardize clinical PSA detection results. To overcome this limitation, herein, naturally extracted PSA was characterized as free PSA (fPSA), and the PSA solution was successfully quantified by amino acid analysis coupled with isotope-dilution mass spectrometry (AAA-IDMS) and enzymatic hydrolysis-IDMS; the results could be traced to the International System of Units (SI) through absolutely quantified amino acids and peptides. After protein hydrolysis or digestion condition optimization, amino acids and signature peptides were detected by liquid chromatography-mass spectrometry with the multiple reaction monitoring mode. The mass concentrations of PSA obtained through AAA-IDMS and enzymatic hydrolysis-IDMS were (75.3 ±â€¯1.5) µg/g (k = 2) and (74.7 ±â€¯1.7) µg/g (k = 2), respectively. The PSA weighted average mass concentration was (75.0 ±â€¯1.6) µg/g (k = 2). The consistency assessment between the two methods was successfully validated, ensuring absolute quantitative accuracy. This study lays the foundation for the development of high-order reference materials for the clinical detection of PSA, which can improve the accuracy, reliability, and consistency of clinical PSA test results.

Variation in TaSPL6-D confers salinity tolerance in bread wheat by activating TaHKT1;5-D while preserving yield-related traits.

Na+ exclusion from above-ground tissues via the Na+-selective transporter HKT1;5 is a major salt-tolerance mechanism in crops. Using the expression genome-wide association study and yeast-one-hybrid screening, we identified TaSPL6-D, a transcriptional suppressor of TaHKT1;5-D in bread wheat. SPL6 also targeted HKT1;5 in rice and Brachypodium. A 47-bp insertion in the first exon of TaSPL6-D resulted in a truncated peptide, TaSPL6-DIn, disrupting TaHKT1;5-D repression exhibited by TaSPL6-DDel. Overexpressing TaSPL6-DDel, but not TaSPL6-DIn, led to inhibited TaHKT1;5-D expression and increased salt sensitivity. Knockout of TaSPL6-DDel in two wheat genotypes enhanced salinity tolerance, which was attenuated by a further TaHKT1;5-D knockdown. Spike development was preserved in Taspl6-dd mutants but not in Taspl6-aabbdd mutants. TaSPL6-DIn was mainly present in landraces, and molecular-assisted introduction of TaSPL6-DIn from a landrace into a leading wheat cultivar successfully improved yield on saline soils. The SPL6-HKT1;5 module offers a target for the molecular breeding of salt-tolerant crops.

Using UAV-Based Temporal Spectral Indices to Dissect Changes in the Stay-Green Trait in Wheat.

Stay-green (SG) in wheat is a beneficial trait that increases yield and stress tolerance. However, conventional phenotyping techniques limited the understanding of its genetic basis. Spectral indices (SIs) as non-destructive tools to evaluate crop temporal senescence provide an alternative strategy. Here, we applied SIs to monitor the senescence dynamics of 565 diverse wheat accessions from anthesis to maturation stages over 2 field seasons. Four SIs (normalized difference vegetation index, green normalized difference vegetation index, normalized difference red edge index, and optimized soil-adjusted vegetation index) were normalized to develop relative stay-green scores (RSGS) as the SG indicators. An RSGS-based genome-wide association study identified 47 high-confidence quantitative trait loci (QTL) harboring 3,079 single-nucleotide polymorphisms associated with SG and 1,085 corresponding candidate genes. Among them, 15 QTL overlapped or were adjacent to known SG-related QTL/genes, while the remaining QTL were novel. Notably, a set of favorable haplotypes of SG-related candidate genes such as TraesCS2A03G1081100, TracesCS6B03G0356400, and TracesCS2B03G1299500 are increasing following the Green Revolution, further validating the feasibility of the pipeline. This study provided a valuable reference for further quantitative SG and genetic research in diverse wheat panels.

Clinical efficacy and complications of MIS-TLIF and TLIF in the treatment of upper lumbar disc herniation: a comparative study.

BACKGROUND: The optimal treatment modality for upper lumbar disc herniation remains unclear. Herein, we compared the clinical efficacy and application value of minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF) and transforaminal lumbar interbody fusion (TLIF) for upper lumbar disc herniation. We aimed to provide new evidence to guide surgical decisions for treating this condition. METHODS: We retrospectively analyzed the clinical data of 81 patients with upper lumbar disc herniation admitted between January 2017 and July 2018, including 41 and 40 patients who underwent MIS-TLIF and TLIF, respectively. Demographic characteristics, preoperative functional scores, perioperative indicators, and postoperative complications were compared. We performed consecutive comparisons of visual analog scale (VAS) scores of the lumbar and leg regions, Oswestry disability index (ODI), Japanese Orthopaedic Association scores (JOA), and MacNab scores at the final follow-up, to assess clinical outcomes 5 years postoperatively. RESULTS: VAS scores of the back and legs were significantly lower in the MIS-TLIF than the TLIF group at 3 months and 1 year postoperatively (P < 0.05). Intraoperative bleeding and postoperative hospitalization time were significantly lower, and the time to return to work/normal life was shorter in the MIS-TLIF than in the TLIF group (P < 0.05). The differences in JOA scores and ODI scores between the two groups at 3 months, 1 year, and 3 years postoperatively were statistically significant (P < 0.05). CONCLUSION: The early clinical efficacy of MIS-TLIF was superior to that of TLIF, but no differences were found in mid-term clinical efficacy. Further, MIS-TLIF has the advantages of fewer medical injuries, shorter hospitalization times, and faster postoperative functional recovery.

Characterizing carbonaceous aerosols in residential coal combustion: Insights from thermal/spectral carbon analyzer coupled with photoionization mass spectrometry analysis.

This study aims to identify unique signatures from residential coal combustion in China across various combustion conditions and coal types. Using a Thermal/Spectral Carbon Analyzer with a Photoionization Time-of-Flight Mass Spectrometer (TSCA-PI-TOF-MS), we focus on the optical properties and organic mass spectra of the emissions. Bituminous coal emerged as the primary emitter of total carbon, releasing 729 µg C/mg PM2.5 under smoldering and 894 µg C/mg PM2.5 under flaming. Carbon fractions mainly comprised OC1 and OC2, except for anthracite's dominance of EC1 under smoldering. Pyrolysis carbon absorption shifted from 405, 445 and 532 nm during smoldering to near-infrared bands (635-980 nm) during flaming for both bituminous and anthracite coal. Conversely, clean coal exhibited an inverse trend, attributed to additives enhancing oxygen-containing organic compounds and long-chain hydrocarbons released in charring process. Sample of bituminous coal began charring at OC3 step, while anthracite began earlier at OC2 step, particularly pronounced under flaming. Clean coal displayed unconventional charring at OC1 step under smoldering condition, producing signature compounds like butenal, methylfuran, furanylalcohol, and naphthol. The mass spectra of bituminous coal featured characteristic peaks, including m/z 192 (methylphenanthrene), 206, 220 (alkylated phenanthrenes), and 234 (retene). Anthracite coal showed a potential tracer at m/z 223, shifting from OC1 in smoldering to OC2 in flaming. Clean coal under flaming condition exhibited elevated levels of aromatic compounds, indicating potential toxicity, with peaks at m/z 178 (phenanthrene), 228 (chrysene/benz[a]anthracene), 234 (retene), 242 (methylchrysene), and 252 (benzo[a]pyrene, benzo[k]fluoranthene). Results also showed that the broader mass spectra range in the OC3 and OC4 steps across all coal types suggests that high-temperature pyrolysis promotes diversity. These findings contribute to refined source apportionment of carbon emissions from residential coal combustion and provide the scientific basis for the formulation of air pollution prevention strategies, crucial for coal-dependent regions.

Characterizing the emission trends and pollution evolution patterns during the transition period following COVID-19 at an industrial megacity of central China.

After the resumption of work and production following the COVID-19 pandemic, many cities entered a "transition phase", characterized by the gradual recovery of emission levels from various sources. Although the overall PM2.5 emission trends have recovered, the specific changes in different sources of PM2.5 remain unclear. Here, we investigated the changes in source contributions and the evolution pattern of pollution episodes (PE) in Wuhan during the "transition period" and compared them with the same period during the COVID-19 lockdown. We found that vehicle emissions, industrial processes, and road dust exhibited significant recoveries during the transition period, increasing by 5.4%, 4.8%, and 3.9%, respectively, during the PE. As primary emissions increased, secondary formation slightly declined, but it still played a predominant role (accounting for 39.1∼ 43.0% of secondary nitrate). The reduction in industrial activities was partially offset by residential burning. The evolution characteristics of PE exhibited significant differences between the two periods, with PM2.5 concentration persisting at a high level during the transition period. The differences in the evolution patterns of the two periods were also reflected in their change rates at each stage, which mostly depend on the pre-PE concentration level. The transition period shows a significantly higher value (8.4 µg m-3 h-1) compared with the lockdown period, almost double the amount. In addition to local emissions, regional transport should be a key consideration in pollution mitigation strategies, especially in areas adjacent to Wuhan. Our study quantifies the variations in sources between the two periods, providing valuable insights for optimizing environmental planning to achieve established goals.

Toripalimab Plus Bevacizumab as First-line Treatment for Advanced Hepatocellular Carcinoma: A Prospective, Multicenter, Single-Arm, Phase II Trial.

PURPOSE: This phase II, multicenter, prospective, single-arm study aimed to evaluate the efficacy and safety of toripalimab plus bevacizumab for treating advanced hepatocellular carcinoma (HCC). PATIENTS AND METHODS: Treatment-naïve patients with advanced HCC received toripalimab 240 mg plus bevacizumab 15 mg/kg every 3 weeks. The primary endpoints included safety and tolerability and objective response rate (ORR) assessed by the investigator per Response Evaluation Criteria in Solid Tumors (RECIST) version 1.1. RESULTS: Fifty-four patients were enrolled between April 17, 2020, and December 11, 2020. As assessed by the investigator according to RECIST v1.1, the ORR was 31.5% [95% confidence interval (CI), 19.5-45.6] and the lower bound of the 95% CI was above the prespecified boundary of 10%. The independent review committee (IRC) assessed ORR according to the modified RECIST (mRECIST), which was 46.3% (95% CI, 32.6-60.4). The median progression-free survival was 8.5 (95% CI, 5.5-11.0) and 9.8 months (95% CI, 5.6 to not evaluable) as assessed by the investigator according to RECIST v1.1 and IRC according to mRECIST criteria, respectively. The median overall survival (OS) was not reached, and the 12- and 24-month OS rates were 77.3% and 63.5%, respectively. Grade 3 or higher treatment-emergent adverse events (TEAEs) occurred in 27 patients (50.0%). The most common TEAEs were proteinuria (59.3%), hypertension (38.9%), increased aspartate aminotransferase (33.3%), increased amylase (29.6%), decreased platelet count (27.8%), and increased bilirubin levels (27.8%). CONCLUSIONS: Toripalimab plus bevacizumab showed a favorable efficacy and safety profile, supporting further studies on this combination regimen as a first-line treatment for advanced HCC.

Short- and long-term post-nephrectomy outcomes for retroperitoneal liposarcoma from a high-volume sarcoma center: a propensity score matching analysis.

BACKGROUND: Multivisceral en bloc resection with the ipsilateral kidney is commonly performed in patients with retroperitoneal liposarcoma (RLPS). We evaluated the effect of nephrectomy on short- and long-term outcomes in patients with RLPS. METHODS: Data from a prospectively maintained database of the Peking University Cancer Hospital Sarcoma Center between April 2011 and August 2022 were analyzed. We classified the RLPS patients who underwent surgery into nephrectomy group (NP) and non-nephrectomy group (non-NP). Patients were matched using a 1:1 propensity score to eliminate baseline differences between groups. Postoperative renal function outcomes, major morbidity, and mortality were analyzed to compare short-term outcomes after nephrectomy. Differences in local recurrence-free survival (LRFS) and overall survival (OS) were compared by Kaplan-Meier analysis with respect to oncological benefits. RESULTS: In the matched cohort, patients in the NP group had significantly higher postoperative eGFR and CKD stages, but none required dialysis. Patients between NP and non-NP had a comparable major morbidity (p = 0.820) and 60-day mortality (p = 0.475). Patients in the NP group had a higher 5-year LRFS rates than those in the non-NP group (34.5 vs. 17.8%, p = 0.015), and similar 5-year OS rates (52.4 vs. 47.1%, p = 0.401). Nephrectomy was an independent risk factor for LRFS, but not for major morbidity or OS. CONCLUSIONS: RLPS resection with nephrectomy is related to a mild progression of renal impairment; however, dialysis is rare. En bloc nephrectomy for complete resection of RLPS is safe and improves local control.

[Corrigendum] Long non­coding RNA LINC00238 suppresses the malignant phenotype of liver cancer by sponging miR­522.

Subsequently to the publication of the above article, an interested reader drew to the authors' attention that two pairs of data panels featured in Figs. 2E and 6D, portraying the results from cell invasion and migration assay experiments, appeared to contain overlapping sections, such that data which were intended to show the results from differently performed experiments had apparently been derived from a smaller number of original sources. The authors were able to re­examine their original data (which was also presented to the Editorial Office), and realized that errors has been made in the compilation of Fig. 2. The proposed revised version of Fig. 2, now showing the results from the 'field 1' view of the data, is shown on the next page. Note that these errors did not significantly affect either the results or the conclusions reported in this paper,.All the authors agree to the publication of this Corrigendum, and are grateful to the Editor of Molecular Medicine Reports for allowing them the opportunity to correct this error; furthermore, they apologize to the readership for any inconvenience caused. [Molecular Medicine Reports 25: 71, 2022; DOI: 10.3892/mmr.2022.12587].

Identification of Two Novel QTL for Fusarium Head Blight Resistance in German Wheat Cultivar Centrum.

Fusarium head blight (FHB) is a devastating disease that occurs in warm and humid environments. The German wheat 'Centrum' has displayed moderate to high levels of FHB resistance in the field for many years. In this study, an F6:8 recombinant inbred line (RIL) population derived from cross 'Centrum' × 'Xinong 979' was evaluated for FHB response following point inoculation in five environments. The population and parents were genotyped using the GenoBaits Wheat 16 K Panel. Stable quantitative trait loci (QTL) associated with FHB resistance in 'Centrum' were mapped on chromosome arms 2DS and 5BS. The most effective QTL, located in 2DS, was identified as a new chromosome region represented by a 1.4 Mb interval containing 17 candidate genes. Another novel QTL was mapped in chromosome arm 5BS of a 5BS to 7BS translocation chromosome. In addition, two environmentally sensitive QTL were mapped on chromosome arms 2BL from 'Centrum' and 5AS from 'Xinong 979'. Polymorphisms of flanking phenotypic variance explained (PVE) markers (allele-specific quantitative PCR [AQP]) AQP-6 for QFhb.nwafu-2DS and 16K-13073 for QFhb.nwafu-5BS were validated in a panel of 217 cultivars and breeding lines. These markers could be useful for marker-assisted selection (MAS) of FHB resistance and provide a starting point for fine mapping and marker-based cloning of the resistance genes.

[Spatial Variability and Source Apportionment of PM2.5 Carbon Components in Tianjin].

The contents of eight carbonaceous subfractions were determined by simultaneously collecting PM2.5 samples from four sites in different functional areas of Tianjin in 2021. The results showed that the organic carbon (OC) concentration was 3.7 µg·m-3 to 4.4 µg·m-3, and the elemental carbon (EC) concentration was 1.6 µg·m-3 to 1.7 µg·m-3, with the highest OC concentration in the central urban area. There was no significant difference in EC concentration. The concentration of PM2.5 showed the distribution characteristics of the surrounding city>central city>peripheral area. The OC/EC minimum ratio method was used to estimate the concentrations of secondary organic carbon (SOC) in PM2.5, and the results showed that the secondary pollution was more prominent in the surrounding city, with SOC accounting for 48.8%. The correlation between carbon subcomponents in each functional area showed the characteristics of the peripheral area>central area>surrounding area, all showing the strongest correlation between EC1 and OC2 and EC1 and OC4. By including the carbon component concentration into the positive definite matrix factorization (PMF) model for source apportionment, the results showed that road dust sources(9.7%-23.5%), coal-combustion sources (10.2%-13.3%), diesel vehicle exhaust (12.6%-20.2%)and gasoline vehicle exhaust (18.9%-38.8%)were the main sources of carbon components in PM2.5 in Tianjin. The pollution sources of carbon components were different in different functional areas, with the central city and peripheral areas mainly affected by gasoline vehicle exhaust; the surrounding city was more prominently affected by the secondary pollution and diesel vehicle exhaust.

Genetic dissection and identification of stripe rust resistance genes in the wheat cultivar Lanhangxuan 121, a cultivar selected from a space mutation population.

Stripe rust is a devastating disease of wheat worldwide. Chinese wheat cultivar Lanhangxuan 121 (LHX121), selected from an advanced line L92-47 population that had been subjected to space mutation breeding displayed a consistently higher level of resistance to stipe rust than its parent in multiple field environments. The aim of this research was to establish the number and types of resistance genes in parental lines L92-47 and LHX121 using separate segregating populations. The first population developed from a cross between LHX121 and susceptible cultivar Xinong 822 comprised 278 F2:3 lines. The second validation population comprised 301 F2:3 lines from a cross between L92-47 and susceptible cultivar Xinong 979. Lines of two population were evaluated for stripe rust response at three sites during the 2018-2020 cropping season. Affymetrix 660 K SNP arrays were used to genotype the lines and parents. Inclusive composite interval mapping detected QTL QYrLHX.nwafu-2BS, QYrLHX.nwafu-3BS, and QYrLHX.nwafu-5BS for resistance in all three environments. Based on previous studies and pedigree information, QYrLHX.nwafu-2BS and QYrLHX.nwafu-3BS were likely to be Yr27 and Yr30 that are present in the L92-47 parent. QYrLHX.nwafu-5BS (YrL121) detected only in LHX121 was mapped to a 7.60 cM interval and explained 10.67-22.57% of the phenotypic variation. Compared to stripe rust resistance genes previously mapped to chromosome 5B, YrL121 might be a new adult plant resistance QTL. Furthermore, there were a number of variations signals using 35 K SNP array and differentially expressed genes using RNA-seq between L92-47 and LHX121 in the YrL121 region, indicating that they probably impair the presence and/or function of YrL121. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-024-01461-0.

Quantification of NOx sources contribution to ambient nitrate aerosol, uncertainty analysis and sensitivity analysis in a megacity.

Dual isotopes of nitrogen and oxygen of NO3- are crucial tools for quantifying the formation pathways and precursor NOx sources contributing to atmospheric nitrate. However, further research is needed to reduce the uncertainty associated with NOx proportional contributions. The acquisition of nitrogen isotopic composition from NOx emission sources lacks regulation, and its impact on the accuracy of contribution results remains unexplored. This study identifies key influencing factors of source isotopic composition through statistical methods, based on a detailed summary of δ15N-NOx values from various sources. NOx emission sources are classified considering these factors, and representative means, standard deviations, and 95 % confidence intervals are determined using the bootstrap method. During the sampling period in Tianjin in 2022, the proportional nitrate formation pathways varied between sites. For suburban and coastal sites, the ranking was [Formula: see text] (NO2 + OH radical) > [Formula: see text] (N2O5 + H2O) > [Formula: see text] (NO3 + DMS/HC), while the rural site exhibited similar fractional contributions from all three formation pathways. Fossil fuel NOx sources consistently contributed more than non-fossil NOx sources in each season among three sites. The uncertainties in proportional contributions varied among different sources, with coal combustion and biogenic soil emission showing lower uncertainties, suggesting more stable proportional contributions than other sources. The sensitivity analysis clearly identifies that the isotopic composition of 15N-enriched and 15N-reduced sources significantly influences source contribution results, emphasizing the importance of accurately characterizing the localized and time-efficient nitrogen isotopic composition of NOx emission sources. In conclusion, this research sheds light on the importance of addressing uncertainties in NOx proportional contributions and emphasizes the need for further exploration of nitrogen isotopic composition from NOx emission sources for accurate atmospheric nitrate studies.

Porous Waterborne Polyurethane Films Templated from Pickering Foams for Fabrication of Synthetic Leather.

Waterborne polyurethane (WPU) latex nanoparticles with proven interfacial activity were utilized to stabilize air-water interfaces of Pickering foams through interfacial interaction with hydrophobic fumed silica particles (SPs). The rheological properties of the Pickering foam were tailored through adjustment of their SP content, which influenced their formability and stability. A Pickering foam stabilized with WPU and SPs was used as a template to prepare a WPU-SP composite porous film. The as-prepared film had intact open-cell porous structures, which increased its water absorption and water-vapor permeability. The porous film was used as a middle layer in the preparation of synthetic leather via a four-step "drying method". Compared with commercial synthetic leather, the lab-made synthetic leather with a middle layer made of the WPU-SP composite porous film exhibited a richer porous structure, acceptable wetting on a fabric substrate, a thicker porous layer, and higher water-vapor permeability. This work provides a novel and facile approach for preparing WPU-SP Pickering foams. Furthermore, the foams have the potential to function as a sustainable material for creating a porous-structured synthetic leather made from WPU, which may be utilized as an alternative to solvent-based synthetic leather.

Spatial source apportionment of airborne coarse particulate matter using PMF-Bayesian receptor model.

Ambient particulate matter (PM2.5 and PM10), has been extensively monitored in numerous urban areas across the globe. Over the past decade, there has been a significant improvement in PM2.5 air quality, while improvements in PM10 levels have been comparatively modest, primarily due to the limited reduction in coarse particle (PM2.5-10) pollution. Unlike PM2.5, PM2.5-10 predominantly originates from local emissions and is often characterized by pronounced spatial heterogeneity. In this study, we utilized over one million data points on PM concentrations, collected from >100 monitoring sites within a Chinese megacity, to perform spatial source apportionment of PM2.5-10. Despite the widespread availability of such data, it has rarely been employed for this purpose. We employed an enhanced positive matrix factorization approach, capable of handling large datasets, in conjunction with a Bayesian multivariate receptor model to deduce spatial source impacts. Four primary sources were successfully identified and interpreted, including residential burning, industrial processes, road dust, and meteorology-related sources. This interpretation was supported by a considerable body of prior knowledge concerning emission sources, which is usually unavailable in most cases. The methodology proposed in this study demonstrates significant potential for generalization to other regions, thereby contributing to the development of air quality management strategies.