Improved in-situ characterization for the scaling-induced wetting in membrane distillation: Unraveling the role of crystalline morphology.

Despite being recognized as a promising technique for treating high salinity water, membrane distillation (MD) has been plagued by the scaling of sparingly soluble salts. The growth of crystals can not only create additional resistance to evaporating water at the feed-membrane interface, but also alter the hydrophobic network to bridge the feed and distillate (i.e., result in the phenomenon of wetting). When recognizing the uncertain behaviors of calcium sulfate (CaSO4) scaling in MD, this study was motivated to ascertain whether the crystal-membrane interactions could be dependent on the variation in crystalline morphology. In particular, optical coherence tomography (OCT) was employed to characterize the scaling-induced wetting via a direct-observation-through-the-membrane (DOTM) mode, which mitigated the effects of developing an external scaling layer on resolving the crystal-membrane interactions. The improved in-situ characterization suggests that the crystalline morphology of CaSO4 could be effectively regulated by varying the stoichiometry of crystallizing ions; the richness of calcium in the aqueous environment for crystallization would be in favor of weakening the crystal-membrane interactions. The stoichiometry-dependent growth of CaSO4 crystals can be exploited to develop an effective strategy for preventing the hydrophobic network from being wetted or irreversibly damaged.

Utilization of Municipal Solid Waste Incineration (MSWIFA) in Geopolymer Concrete: A Study on Compressive Strength and Leaching Characteristics.

This study explores the utilization of municipal solid waste incineration fly ash (MSWIFA) in geopolymer concrete, focusing on compressive strength and heavy metal leachability. MSWIFA was sourced from a Shenzhen waste incineration plant and pretreated by washing to remove soluble salts. Geopolymer concrete was prepared incorporate with washed or unwashed MSWIFA and tested under different pH conditions (2.88, 4.20, and 10.0). Optimal compressive strength was achieved with a Si/Al ratio of 1.5, water/Na ratio of 10, and sand-binder ratio of 0.6. The washing pretreatment significantly enhanced compressive strength, particularly under alkaline conditions, with GP-WFA (washed MSWIFA) exhibiting a 49.6% increase in compressive strength, compared to a 21.3% increase in GP-FA (unwashed MSWIFA). Additionally, GP-WFA's compressive strength reached 41.7 MPa, comparable to that of the control (GP-control) at 43.7 MPa. Leaching tests showed that acidic conditions (pH 2.88) promoted heavy metal leaching, which increased over the leaching time, while an alkaline environment significantly reduced the leachability of heavy metals. These findings highlight the potential of using washed MSWIFA in geopolymer concrete, promoting sustainable construction practices, particularly in alkaline conditions.

Methane oxidation coupling with heavy metal and microplastic transformations for biochar-mediated landfill cover soil.

The impact of co-occurring heavy metal (HM) and microplastic (MP) pollution on methane (CH4) oxidation by methanotrophs (MOB) in landfill cover soil (LCS) and the role of biochar in mediating these collaborative transformations remains unclear. This study conducted batch-scale experiments using LCS treated with individual or combined HMs and MPs, with or without biochar amendment. Differentiation in methanotrophic activities, HM transformations, MP aging, soil properties, microbial communities, and functional genes across the groups were analyzed. Biochar proved essential in sustaining efficient CH4 oxidation under HM and MP stress, mainly by diversifying MOB, and enhancing polysaccharide secretion to mitigate environmental stress. While low levels of HMs slightly inhibited CH4 oxidation, high HM concentration enhanced methanotrophic activities by promoting electron transfer process. MPs consistently stimulated CH4 oxidation, exerting a stronger influence than HMs. Notably, the simultaneous presence of low levels of HMs and MPs synergistically boosted CH4 oxidation, linked to distinct microbial evolution and adaptation. Methanotrophic activities were demonstrated to affect the fate of HMs and MPs. Complete passivation of Cu was readily achieved, whereas Zn stabilization was negatively influenced by biochar and MPs. The aging of MPs was also partially suppressed by biochar and HM adsorption.

Theoretical and experimental investigations of speckle features based on free-space surface scattering.

Speckle is a significant challenge for laser imaging systems, as it degrades the image quality. In this study, an improved theoretical model is established to describe the speckle features in free-space optical path. The model quantitatively defines the relationship between speckle contrast and five parameters: wavelength, screen surface roughness, light-spot diameter, incidence angle, and observation angle. Subsequently, the theoretical results are experimentally verified. This study enhances the theory of speckle suppression in free-space optical path, and thus enriches the existing speckle suppression theory. The speckle features based on free-space surface-scattered fields have the potential for applications related to non-imaging optics.

Hydrothermal-enhanced pyrolysis for efficient NOX reduction and biochar valorization from food waste digestate.

Pyrolysis has emerged as a promising technology for valorizing digestate resulting from the anaerobic digestion of food waste. However, the high NOX emissions during pyrolysis limit its application. This study proposed a hydrothermal coupled pyrolysis process to control the element transfer in digestate during biochar production. The efficient reduction of NOX emissions and the improvement of biochar adsorbability were realized. The hydrothermal process reduced the nitrogen content in solid digestate by 49.10 %-81.79 %, thus reducing the NOX precursors in syngas and the N-containing substances in bio-oil. Additionally, the specific surface area and the total pore volume of biochar were enhanced from 25 m2/g to 60-73 m2/g and 0.06 cm3/g to 0.12-0.14 cm3/g, respectively. More defects, oxygen-containing functional groups, and doped Ca on the biochar resulted in a high phosphate removal efficiency of 94 %. The proposed technology provides an efficient and environmentally friendly way to utilize the digestate.

Assessing the aging and environmental implications of polyethylene mulch films in agricultural land.

Polyethylene mulch films (MFs) are widely employed in agricultural land to enhance crop yield and quality, but the MF residue causes significant environmental concerns. To promote the sustainable application of MFs, it is essential to assess their fate throughout their service life and understand the underlying degradation mechanisms. In this study, surface-exposed and soil-buried MFs were separately collected from agricultural land in Inner Mongolia, China. The variations in aging performance and corresponding property alterations of MF were thoroughly examined. The results indicated that sunlight exposure considerably hastens MF degradation, whereas buried MFs experience a more moderate aging process due to the inhibitory effects of the dark and anaerobic environment on oxidation. Surface cracking was observed in MF-Light samples as a result of photodegradation, while chemical and moisture interactions with soil caused partial perforation in MF-Soil samples. Relative to the pristine MF, the oxidation, unsaturation, and hydroxylation levels of MF-Light increased to 0.88, 0.35, and 0.73, respectively, with corresponding values for MF-Soil at 0.44, 0.13, and 0.24. The generated oxygen-containing functional groups lead to a decrease in contact angles of MF-Light and MF-Soil, enhancing their hydrophilicity. The aging process of MFs led to a decline in mechanical properties, posing challenges for recycling. Moreover, nearly all phthalate esters (PAEs) were released from MFs, regardless of sunlight exposure or soil burial. The use of MFs also impacted the abundance of soil microbial communities. Specifically, the selected polyethylene MF enriched Actinobacteriota by 75%, while reducing Chloroflexi and Firmicutes by 27% and 45%, respectively.

Predicting maturity and identifying key factors in organic waste composting using machine learning models.

The measurement of germination index (GI) in composting is a time-consuming and laborious process. This study employed four machine learning (ML) models, namely Random Forest (RF), Artificial Neural Network (ANN), Support Vector Regression (SVR), and Decision Tree (DT), to predict GI based on key composting parameters. The prediction results showed that the coefficient of determination (R2) for RF (>0.9) and ANN (>0.9) was higher than SVR (<0.6) and DT (<0.8), suggesting that RF and ANN displayed superior predictive performance for GI. The SHapley additive exPlanations value result indicated that composting time, temperature, and pH were the important features contributing to GI. Composting time was found to have the most significant impact on GI. Overall, RF and ANN were suggested as effective tools for predicting GI in composting. This study offers the reliable approach of accurately predicting GI in composting processes, thereby enabling intelligent composting practices.

Methane removal efficiencies of biochar-mediated landfill soil cover with reduced depth.

Biochar amendment for landfill soil cover has the potential to enhance methane removal efficiency while minimizing the soil depth. However, there is a lack of information on the response of biochar-mediated soil cover to the changes in configuration and operational parameters during the methane transport and transformation processes. This study constructed three biochar-amended landfill soil covers, with reduced soil depths from 75 cm (C2) to 55 cm (C3) and 45 cm (C4), and the control group (C1) with 75 cm and no biochar. Two operation phases were conducted under two soil moisture contents and three inlet methane fluxes in each phase. The methane removal efficiency increased for all columns along with the increase in methane flux. However, increasing moisture content from 10% to 20% negatively influenced the methane removal efficiency due to mass transfer limitation when at a low inlet methane flux, especially for C1; while this adverse effect could be alleviated by a high flux. Except for the condition with low moisture content and flux combination, C3 showed comparable methane removal efficiency to C2, both dominating over C1. As for C4 with only 45 cm, a high moisture content combined with a high methane flux enabled its methane removal efficiency to be competitive with other soil depths. In addition to the geotechnical reasons for gas transport processes, the evolution in methanotroph community structure (mainly type I methanotrophs) induced by biochar amendment and variations in soil properties supplemented the biological reasons for the varying methane removal efficiencies.

Manipulating soil microbial community assembly by the cooperation of exogenous bacteria and biochar for establishing an efficient and healthy CH4 biofiltration system.

Manipulating the methanotroph (MOB) composition and microbial diversity is a promising strategy to optimize the methane (CH4) biofiltration efficiency of an engineered landfill cover soil (LCS) system. Inoculating soil with exogenous MOB-rich bacteria and amending soil with biochar show strong manipulating potential, but how the two stimuli interactively shape the microbial community structure and diversity has not been clarified. Therefore, three types of soils with active CH4 activities, including paddy soil, river wetland soil, and LCS were selected for enriching MOB-dominated communities (abbreviated as B_PS, B_RWS, and B_LCS, respectively). They were then inoculated to LCS which was amended with two distinct biochar. Besides the aerobic CH4 oxidation efficiencies, the evolution of the three microbial communities during the MOB enrichment processes and their colonization in two-biochar amended LCS were obtained. During the MOB enriching, a lag phase in CH4 consumption was observed merely for B_LCS. Type II MOB Methylocystis was the primary MOB for both B_PS and B_LCS; while type I MOB dominated for B_RWS and the major species were altered by gas concentrations. Compared to biochar, a more critical role was demonstrated for the bacteria inoculation in determining the community diversity and function of LCS. Instead, biochar modified the community structures by mainly stimulating the dominant MOB but could induce stochastic processes in community assembly, possibly related to its inorganic nutrients. Particularly, combined with biochar advantages, the paddy soil-derived bacteria consortiums with diverse MOB species demonstrated the potent adaption to LCS niches, not only retaining the high CH4-oxidizing capacities but also shaping a community structure with more diverse soil function. The results provided new insights into the optimization of an engineered CH4-mitigation soil system by manipulating the soil microbiomes with the cooperation of exogenous bacteria and biochar.

Prompt Hole Extraction Suppresses V5+ Dissolution and Sustains Large-Area BiVO4 Photoanodes for Over 2100 h Water Oxidation.

Nanostructured bismuth vanadate (BiVO4) is at the forefront of emerging photoanodes in photoelectrochemical tandem devices for solar water splitting owing to the suitable band edge position and efficient charge separation capability. However, the (photo)chemical corrosion involving V5+ dissolution limits the long-term stability of BiVO4. Herein, guided by DFT calculations, we introduce an ALD-derived NiOx catalyst layer on BiVO4 to stabilize the surface Bi-O bonds, facilitate hole extraction, and thus suppress the V5+ dissolution. At the same time, the ALD NiOx catalyst layer could efficiently suppress the surface recombination and accelerate the surface OER kinetics, boosting the half-cell applied bias photon-to-current efficiency of BiVO4 to 2.05%, as well as a fill factor of 47.1%. By adding trace NaVO3 to the electrolyte, the NiOx/BiVO4 photoanode with an illumination area of 10.5 cm2 shows a record operational stability of more than 2100 h.

Analysing the mechanism of food waste anaerobic digestion enhanced by iron oxide in a continuous two-stage process.

The food waste (FW) digestion performance can be enhanced by introducing iron oxide (IO) into digesters. However, the role of IO in continuous two-stage digesters in enhancing the FW anaerobic digestion remains unclear. In this study, the effect of IO on the bioenergy recovery from a two-stage digestion process was investigated. The bioenergy recovery was significantly increased by up to 208.43 % with IO addition. The activities of dehydrogenase, α-amylase, and protease increase by 0.82-1.44, 7.24-14.56 and 7.97-20.45 times, respectively, as compared with that of the blank. With IO addition, the metabolic pathway in hydrolytic-acidogenic (HA) reactor shifted from lactic acid fermentation to butyric fermentation, which promoted stable methane production in methanogenic (MG) reactor. The activity of coenzyme F420 increased by 19.19-39.01 times, indicating that IO facilitated FW digestion by promoting hydrogenotrophic methanogenesis. The enhancement in the enzyme activity was attributable to the Fe2+ generated by dissimilatory iron reduction. According to the microbial analysis, IO enhanced interspecies hydrogen transfer between Methanobacterium and Syntrophomonas. Furthermore, IO improved direct interspecies electron transfer between Geobacter sulfurreducens and Methanosarcina. The effluent recirculation strategy greatly facilitated the hydrolysis and acidification of FW, which was critical for improving the two-stage process performance.

Determination of key factors affecting biofilm formation on the aged Poly(ethylene terephthalate) during anaerobic digestion.

Biofilm formation on plastic surface is a growing concern because it can alter the plastic surface properties and exacerbate the ecological risk. Identifying key factors that affecting biofilm formation is critical for effective pollution control. In this study, the poly (ethylene terephthalate) (PET) was aged in water and air conditions with UV irradiation, then incubated in the digestate of food waste anaerobic digestion to allow biofilm formation. Surface analysis techniques, including scanning electron microscopy (SEM), atomic force microscopy (AFM), and Fourier-transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), were utilized to investigated the changes in the topography, roughness, hydrophily, and functional groups change of the PET surface during the aging process. Confocal laser scanning microscopy (CLSM) was used to determine the distribution of microorganisms on the PET surface after incubation in the digestate. This study focused on understanding the interactions between the PET surface and biofilm to identify critical surface factors that affect biofilm formation. Results showed that the four months aging process decreased the contact angle of the PET surface from 96.92° to 76.08° and 68.97° in water and air conditions, respectively, corresponding to an increase of 44% and 70% in the surface energy. Additionally, aging in air conditions led to a rougher surface compared to water conditions. The arithmetic roughness average (Ra) of the PET-Water was 11.0 nm, comparable to that of the pristine PET, while the value of PET-Air was much higher (43.9 nm). The results further indicated that biofilm formation during anaerobic digestion was more sensitive to roughness than hydrophily. The PET surface aged in air conditions provided a more suitable environment for microbial reproduction, leading to the aggradation of living cells.

Nontarget Insights into the Fate of Cl-/Br-Containing DOM in Leachate during Membrane Treatment.

Halogenated organic compounds in wastewater are persistent and bioaccumulative contaminants of great concern, but few are known at the molecular level. Herein, we focus on nontarget screening of halogenated dissolved organic matter (DOM) in highly concentrated organic matrices of waste leachates and their concentrates. Solid-phase extraction (SPE) was optimized before capturing halogenated signatures via HaloSeeker 2.0 software on mining full-scan high-resolution mass spectrometry (HRMS) fingerprints. This study identified 438 Cl-/Br-containing DOM formulas in 21 leachates and membrane concentrates. Among them, 334 formulas were achieved via SPE with mixed-sorbent cartridges (mixed-SPE), surpassing the 164 formulas achieved through Bond Elut PPL cartridges (PPL-SPE). Herein, only four samples identified via PPL-SPE exhibited a resolution of >50% for extracted Cl-/Br-containing DOM by either SPE. The halogenated DOM constituted 6.87% of the total DOM mass features. Nevertheless, more abundant adsorbable organic halogens deciphered waste leachates and highly concentrated waste streams as reservoirs for halogenated contaminants. Remarkably, 75.7-98.1% of Cl-/Br-containing DOM in primary membrane concentrates remained stable through the secondary membrane treatment, indicating the persistence of these unknown contaminants even post-treatment.

Enhanced methane oxidation efficiency by digestate biochar in landfill cover soil: Microbial shifts and carbon metabolites insights.

The ability of biochar to enhance the oxidation of methane (CH4) in landfill cover soil by promoting the growth and activity of methane-oxidizing bacteria (MOB) has attracted significant attention. However, the optimal characteristics of digestate-derived biochar (DBC) for promoting the MOB community and CH4 removal performance remain unclear. This study examined how the CH4 oxidation capacity and respiratory metabolism of MOB life process are affected by the application of DBC compared with the most commonly used woody-derived biochar (WBC). The addition of both WBC and DBC enhanced CH4 oxidation, with DBC exhibiting a nearly twofold increase in cumulative CH4 oxidation mass (7.14 mg CH4 g-1) compared to WBC. The high ion-exchange capacity of DBC was found to be more favorable for the growth of Type I MOB, which have more efficient metabolic pathways for CH4 oxidation. Type I MOB which are abundant in DBC may prefer monovalent positive ions, while the charge-rich nature of DBC may also have hindered extracellular protein aggregation. The superiority of DBC in terms of CH4 oxidation thus highlights the underlying mechanisms of biochar-MOB interactions, offering potential biochar options for landfill cover soil.

Carbon dots/TiO2 enhanced visible light-assisted photocatalytic of leachate: Simultaneous effects and Mechanism insights.

The persistence and potential fouling risks associated with humic substances and bacteria present in leachate have gained increasing attention. Therefore, developing efficient and environmentally compatible technologies for their removal is essential. This study presented the hydrothermal synthesis of a photocatalyst by coupling carbon dots (CDs) and bulk TiO2 (P25). The incorporation of CDs increased the photocatalytic performance by enhancing visible light absorption and facilitating the separation of electrons/holes. Compared to P25, the CDs/P25 exhibited optimal photocatalytic activity for humic acid (HA), fulvic acid (FA), and leachate, with 1.64, 1.02, and 1.12 times higher activity, respectively. Remarkedly, the CDs/P25 accelerated the conversion of large HA molecules into small molecules at a faster rate and higher amount than the bulk P25, due to the increase of hydroxyl radicals, monoclinic oxygen radicals, and superoxide radicals. Additionally, the CDs/P25 demonstrated better bacterial-deactivation ability than the P25, with dead bacteria percentages of 83.3% and 34.6%, respectively. This study provides a promising strategy for efficiently applying CDs/P25 photocatalysis to leachate treatment.

Spatial-temporal clogging development in leachate collection systems of landfills: Insight into chemical and biological clogging characteristics.

The clogging of leachate collection systems (LCSs) is a typical challenge for landfills operation. Although clogging occurs in different LCS components, its spatial-temporal distributions remain unclear. This study aimed to systematically investigate the dynamic clogging development in simulated LCSs by monitoring changes in clogging characteristics over time. Results revealed that clogging accumulated in all components of the simulated LCS during a 215-day period, including chemical clogging and bio-clogging. Distinct spatial variations in clogging components were observed along the leachate flow of the simulated LCS, with the geotextile being severely clogged due to bio-clogging (70.1 ± 3.0%-80.0 ± 0.5%). Additionally, chemical clogging mainly occurred at the top (85.4 ± 0.8%-95.0 ± 0.9%) and middle (91.2 ± 0.8%-94.9 ± 1.1%) gravel layers. Nevertheless, the percentage of chemical clogging decreased from 72.0 ± 2.1% (day 42) to 42.5 ± 2.7% (day 215) at the bottom gravel layer. Chemical clogging was the main type in the pipe, accounting for 69.6 ± 0.5% (day 215). In addition, the ratios of bio-clogging to chemical clogging changed over time in all LCS components. The spatial-temporal characteristics of clogging across LCS components can enhance the understanding of clogging mechanisms, facilitate the design optimization of LCSs, and promote the formulation of effective control strategies.

Different Fenton treatments on diverse landfill organics: Discover the underestimated effect of derived-DOM.

Fenton is one of the most promising processes for the removal of dissolved organic matter (DOM). It has always been highly suspected that derived-DOM would be generated during Fenton reaction, but there is lack of direct evidence at the molecular level. The present study explored the molecular properties of the derived-DOM of five common Fenton technologies for degradation of nine landfill organics including leachates and concentrates based on UPLC Orbitrap MS/MS analysis. The comparative results confirmed that DOM derivation was essential for Fenton technologies, with the DOM derivation rate as high as 17.3%-70.3%. The derived-DOM are dominated by trace organic contaminants (CHON-DOM), and typical new contaminants (PPCPs, flavors, etc.). Heterogeneous Fenton had significantly lesser derived-DOM (35.1% ± 16.9%) than other Fenton technologies. Among all landfill organics, medium leachate was most likely to derive DOM (51.4% ± 13.9%), while unexpectedly old leachate had the lowest derivation rate (32.0% ± 5.3%). In the overall membrane treatment process, the secondary membrane concentrate is more susceptible to DOM derivation (43.4% ± 5.5%-49.6% ± 3.8%) than the primary membrane concentrate (40.7% ± 14.1%), and the elements and subcategories composition and molecular property indexes of the derived-DOM become more complex. On the contrary, the DOM derivatization rate of the biological treatment effluent after Fenton treatment was much lower than that of the various concentrates after Fenton treatment and the molecular property are simpler. Therefore, Fenton may replace the membrane process directly as a deep treatment process after biological treatment of landfill leachate. These information would help the selection and application of Fenton technologies.

Inhibition insights of hydrothermal liquid digestate in anaerobic digestion: Impact on organics conversion and inhibitor degradation.

Hydrothermal liquid digestate has been widely accepted as a substrate in anaerobic digestion (AD) for energy recovery. However, the potential negative impacts of hydrothermal liquid digestate on AD remain unclear. In this study, the organic biodegradability of hydrothermal liquid digestate produced from hydrothermal treatment (HTT) at different temperatures was analyzed, and the formation and degradation process of potential inhibitory substances were discussed. Results demonstrated that the AD lag phase of hydrothermal liquid digestate increased from 3 days at raw liquid digestate to 5-21 days. When the HTT temperature reached 220 °C, the methane yield decreased by 48%, and more than 71% of the organics in the hydrothermal liquid digestate were not utilized by AD. Biorefractory substances, such as fulvic and humic acids, accumulate in the hydrothermal liquid digestate. Potential inhibitory substances from Maillard reactions mainly affect the methanogenesis of AD. Most inhibitory substances were degraded within 7-22 days, with the degradation rate following the order of pyrroles > pyrazines > ketones > imidazoles > indoles. The AD community structure and methane conversion were partially re-established after most inhibitory substances were degraded. This study provides valuable information on eliminating the potential negative effects of hydrothermal liquid digestate on AD.

Enhancing methane production from food waste with iron-carbon micro-electrolysis in a two-stage process.

A two-stage process, consisting of a leach-bed reactor (LBR) and an up-flow anaerobic sludge blanket reactor (UASB), has been commonly adopted to improve food waste anaerobic digestion. However, its application is limited due to low hydrolysis and methanogenesis efficiencies. This study proposed a strategy of incorporating iron-carbon micro-electrolysis (ICME) into the UASB and recirculating its effluent to the LBR to improve the two-stage process efficiency. Results showed that the integration of the ICME with the UASB significantly increased the CH4 yield by 168.29%. The improvement of the food waste hydrolysis in the LBR mainly contributed to the enhanced CH4 yield (approximately 94.5%). The enrichment of hydrolytic-acidogenic bacterial activity, facilitated by the Fe2+ generated through ICME, might be the primary cause of the improved food waste hydrolysis. Moreover, ICME enriched the growth of hydrogenotrophic methanogens and stimulated the hydrogenotrophic methanogenesis pathway in the UASB, contributing partially to the enhanced CH4 yield.

Impacts of digestate-based compost on soil property and nutrient availability.

The treatment of digestate from food waste (DFW) has emerged as the bottleneck for food waste anaerobic digestion. DFW generally contains abundant nutrients that can be recycled by composting. However, the effect of DFW-based compost on soil improvement has not been extensively explored. In this study, soil properties were improved by adding various amounts of DFW-based compost, and the growth conditions of Pak choi were monitored. The results indicated that the DFW-based compost could provide nitrogen, calcium, magnesium, and organic matter, thereby enhancing the growth of Pak choi, accumulating chlorophyll, and improving photosynthesis efficiency. As the amount of added DFW-based compost increased from 0% to 20%, the fresh biomass, leaf weight, and root weight of Pak choi increased by 242%, 262%, and 99%, respectively. The total chlorophyll content was 2.62 mg g-1 in control and increased to 12.45 mg g-1 in the group with 20% DFW-based compost, benefiting the photochemical efficiency of Pak choi. However, the growth was inhibited when the addition amount exceeded 20%, potentially due to excessive nutrient supplementation. Overall, the addition of 20% of DFW-based compost was suggested to promote the growth of Pak choi by providing proper nutrients.