RESUMEN
Aqueous zinc ion batteries (AZIBs) are promising candidates for next-generation energy storage systems due to their low cost, high safety, and environmental friendliness. As the critical component, Zn metal with high theoretical capacity (5855 mAh cm-3), low redox potential (-0.763 V vs standard hydrogen electrode), and low cost has been widely applied in AZIBs. However, the low Zn utilization rate (ZUR) of Zn metal anode caused by the dendrite growth, hydrogen evolution, corrosion, and passivation require excess Zn installation in current AZIBs, thus leading to increased unnecessary battery weight and decreased energy density. Herein, approaches to the historical progress toward high ZUR AZIBs through the perspective of electrolyte optimization, anode protection, and substrate construction are comprehensively summarized, and an in-depth understanding of ZUR is highlighted. Specifically, the main challenges and failure mechanisms of Zn anode are analyzed. Then, the persisting issues and promising solutions in the reaction interface, aqueous electrolyte, and Zn anode are emphasized. Finally, the design of 100% ZUR AZIBs free of Zn metal is presented in detail. This review aims to provide a better understanding and fundamental guidelines on the high ZUR AZIBs design, which can shed light on research directions for realizing high energy density AZIBs.
RESUMEN
Surgical resection remains the main treatment for malignant tumors. Image-guided surgery aims to remove tumor tissue completely while preserving normal tissue, thereby reducing tumor recurrence rates and injury. However, challenges like tissue autofluorescence, limited probe penetration and low contrast restrict its use. Near-infrared (NIR) persistent luminescent nanoparticles (PLNPs) provide a solution by emitting persistent luminescence (PersL) even after excitation ceases, thus circumventing autofluorescence and enabling deep tumor imaging. In this study, we prepared nano-sized (140 nm hydrodynamic size) Cr3+ doped zinc gallogermanate (ZGC) using a removable template method and modified it with folate acid to obtain ZGC-FA, which exhibits NIR (695 nm) PersL with a signal-to-noise ratio of 23.9 in vivo. We utilized a colon cancer model that selectively expressed luciferase for the first time to validate the guiding efficacy of ZGC-FA in precision surgical resection. Post-intraperitoneal injection at 50 minutes, the PersL closely matched the tumor boundaries, achieving an overlap rate of approximately 98%. Complete tumor resection was achieved under PersL guidance, with only 2.3% of healthy tissue removed. This research underscores the potential of ZGC-FA in the field of surgical oncology. The precision of the ZGC-FA guided surgical approach holds promise to enhance surgical outcomes and facilitate postoperative recovery in patients.
RESUMEN
Due to their unique afterglow ability, long-wavelength-light rechargeable persistent luminescence (PersL) nanoparticles (PLNPs) have been emerging as an important category of imaging probes. Among them, ZnGa2O4:0.6% Cr3+ (ZGC) PLNPs have gained widespread recognition due to the ease of synthesis and uniform morphology. Unfortunately, the limited absorption arising from the low molar extinction coefficient of Cr3+ results in relatively low afterglow intensity and rapid decay after long-wavelength LED light irradiation. Herein, we discovered a strategy that boosting dye-sensitization performance was able to effectively amplify the PersL signal under white LED light. Specifically, Dil served as a highly efficient sensitizer for Cr3+, promoting the absorption of the excitation light. By adjusting the Pr dopant concentrations, ZGCP0.5 PLNPs with optimal trap densities were obtained, which showed the highest PersL intensity and dye-sensitized performance. Strikingly, ZGCP0.5-Dil PLNPs exhibited a 24.3-fold enhancement in intensity and a 2-fold prolongation of decay time over bare ZGC PLNPs through the synergy effect of optimal electron traps and dye sensitization. Photostable ZGCP0.5-Dil PLNPs enabled imaging of the HepG2 tumor and effectively guided tumor surgical resection verified by the H&E staining analysis. This strategy could be a significant reference in other dye-sensitization PLNPs to enhance longer-wavelength rechargeable PersL.
RESUMEN
Linearly interlinked single atoms offer unprecedented physiochemical properties, but their synthesis for practical applications still poses significant challenges. Herein, linearly interlinked iron single-atom catalysts that are loaded onto interconnected carbon channels as cathodic sulfur hosts for room-temperature sodium-sulfur batteries are presented. The interlinked iron single-atom exhibits unique metallic iron bonds that facilitate the transfer of electrons to the sulfur cathode, thereby accelerating the reaction kinetics. Additionally, the columnated and interlinked carbon channels ensure rapid Na+ diffusion kinetics to support high-rate battery reactions. By combining the iron atomic chains and the topological carbon channels, the resulting sulfur cathodes demonstrate effective high-rate conversion performance while maintaining excellent stability. Remarkably, even after 5000 cycles at a current density of 10 A g-1, the Na-S battery retains a capacity of 325 mAh g-1. This work can open a new avenue in the design of catalysts and carbon ionic channels, paving the way to achieve sustainable and high-performance energy devices.