Comparison of the 3-D mesh and Sugarbaker repair for parastomal hernia: a single center experience in China.

Parastomal hernias (PSH) are difficult to manage and associated with high rates of postoperative recurrence and complications. Sugarbaker and three-dimensional (3-D) mesh repair are commonly used methods for the surgical treatment of PSH. However, the efficacy and safety of these surgical techniques have not been adequately compared. Patients with PSH who received 3-D mesh or Sugarbaker repair at our center from August 2012 to May 2023 were included. We retrospectively analyzed their demographic data and postoperative outcomes. The primary outcome measure was the recurrence rate at 1-year follow-up. A total of 86 patients were enrolled, involving 53 in the 3-D mesh (62%) group and 33 in the Sugarbaker (38%) group. Most cases (73%) involved were the laparoscopic approach. The recurrence rate at 1-year follow-up was 15% (eight cases) in the 3-D mesh group and 24% (eight cases) in the Sugarbaker group, with no statistical significance (P = 0.29). Additionally, no differences were observed between the 3-D mesh and Sugarbaker groups in the length of hospitalization or in short- and long-term complications. Sugarbaker and 3-D mesh repair have similar clinical efficacy in the surgical treatment of PSH. Further randomized controlled trials are required to confirm these results.Trial registration number.This study was retrospectively registered at clinicaltrials.gov (NCT06077318).

Single-Port One Anastomosis Sleeve Gastrectomy with Transit Bipartition: Initial Experience and Technique.

BACKGROUND: Sleeve gastrectomy with transit bipartition (SG-TB) procedure has been gaining traction recently. While being a relatively novel procedure, it shows potentials to improve the standalone SG outcomes, such as diabetes remission and reflux. This article aims to show insights on performing SG-TB in one anastomosis fashion (SG-OATB) and single-port approach. METHODS: Three patients who underwent laparoscopic single-port SG-OATB at our hospital were included. The parameters included in this study comprised of age, gender, height, weight, body mass index (BMI), type 2 diabetes mellitus (T2DM) assessment, gastroesophageal reflux disease (GERD) assessment, length of the small bowel, the duration of the procedure, and 30-day readmission rate. RESULTS: The mean preoperative assessments for the three patients were as follows: two females vs. one male; age 38.7 ± 5.5 years old; weight 105.7 ± 5.4 kg; height 1.64 ± 0.11 m; BMI 39.3 ± 4.7 kg/m2; fasting blood glucose 6.7 ± 1.2 mmol/L; glycosylated hemoglobin level 7.1 ± 1.3%; GERD-Questionnaire score 6.3 ± 1.5; two patients with esophagitis grade A and B following endoscopy. The total duration of the procedure was 170.0 ± 26.5 min; there was no need for conversion to multiple-port in all patients. The 30-day readmission rate for all patients was 0%. CONCLUSION: In our small cases of patients, single-port SG-OATB is feasible and safe. We found the closure of the anastomosis defect to be most technically demanding. To understand better the outcome of single-port SG-OATB, studies with larger sample and longer follow-up will be needed in the future.

Risk factors of recurrence after incisional hernia preperitoneal repair: a long-term retrospective single-center cohort study.

PURPOSE: To explore the risk factors for incisional hernia (IH) recurrence following open prepertioneal repair. METHODS: Patients diagnosed with primary IH who underwent open preperitoneal repair at our hospital were enrolled. Patients were assessed, and perioperative factors were collected. Recurrence surveys were performed at regular intervals throughout the long-term postoperative follow-up. The risk factors for IH recurrence were identified using univariate and multivariate analyses. RESULTS: This study included 145 patients. Significant differences were found between recurrence and non-recurrence patients regarding pulmonary ventilation function (PVT), age, body mass index (BMI), mesh materials, type of surgery (clean, clean-contaminated, or contaminated), surgical site infections (SSIs), maximum width of the hernia defect (MWHD), and site of incisional hernia (P < 0.01). The univariate survival analysis revealed that PVT abnormalities, age > 70 years, BMI > 27 kg/m2, porcine small intestine submucosal (PSIS) mesh, non-clean surgery, SSIs, MWHD > 10 cm, and location in the lateral zones were significant factors for IH recurrence after open preperitoneal repair. The multivariate survival analysis showed that PVT abnormalities, age > 70 years, BMI > 27 kg/m2, and PSIS mesh were independent risk factors for IH recurrence after open preperitoneal repair. CONCLUSIONS: We identified PVT abnormalities, age > 70 years, BMI > 27 kg/m2, and PSIS mesh as novel risk factors for IH recurrence after open preperitoneal repair.

Suture repair versus mesh repair in elderly populations with incarcerated or strangulated groin hernia.

Tension-free hernia repair is the gold standard for groin hernia repair. However, the optimal surgical treatment for incarcerated or strangulated groin hernia in elderly populations is controversial. The aim of this study is to compare the clinical efficacy of mesh repair and suture repair in the treatment of incarcerated or strangulated groin hernia in elderly patients. Patients ≥ 65 years who underwent urgent surgical repair for incarcerated or strangulated groin hernia from January 2012 to June 2022 were included. Patients' demographic data and postoperative outcomes were retrospectively analyzed. Patients with limited life expectancy were screened from the elderly population for subgroup analysis. A total of 103 patients (median age: 84 years old, range 65-96; mean follow-up time: 36.8 ± 24.8 months) were included, involving 42 cases in the suture repair group and 61 cases in the mesh repair group. Suture repair and mesh repair had similar lengths of ICU and hospital stay, and rates of small bowel resection, chronic pain, surgical site infection, and surgical-related death. However, suture repair had a significantly higher recurrence rate than mesh repair (7% vs. 2%, P = 0.04). In our subgroup analysis, for patients with limited life expectancy (41 patients; median age: 88 years old, range: 80-96), suture repair had no statistical difference in postoperative outcomes compared with mesh repair. Mesh repair is suitable for elderly patients with acutely incarcerated or strangulated groin hernias. However, for elderly patients with limited life expectancy, suture repair and mesh repair showed similar clinical outcomes.

Routine gastric suspension technique in single-port sleeve gastrectomy procedure.

BACKGROUND: Due to limited technical demand, single-port sleeve gastrectomy (SPSG) is a feasible laparoscopic technique for sleeve gastrectomy (SG). Nonetheless, difficulties exist when performing the single-port technique, and in this study, we aim to describe a slight maneuver that can improve the SPSG procedure. METHODS: Patients who underwent laparoscopic SG between January 2022 and May 2023 at our hospital were included. The patients were classified into two groups: (1) SPSG and (2) multiple-port SG (MPSG). The parameters for this analysis were the patients' age, gender, weight, body mass index (BMI), conversion rate, drainage placement, 30-day readmission rate, and postoperative complications. Postoperative one-month and three-month percentages of total weight loss (%TWL) were calculated and compared. RESULTS: 171 patients were included in this study: (1) the SPSG group (n = 96) and (2) the MPSG group (n = 75). No statistically significant difference was observed within the preoperative (age, gender, height, weight, and BMI) and the perioperative parameters between SPSG and MPSG (operation time, drainage placement, 30-day readmission) (p > 0.05). Per Clavien-Dindo's grading, two patients in the SPSG group suffered grade 1 complications; for the MPSG group, one patient sustained grade 2 and another suffered grade 3b complication. No statistical significance was observed on the %TWL between the two groups (p > 0.05). CONCLUSION: Our study found that performing SPSG in specific patient is feasible and non-inferior when compared to the MPSG. Further studies will be needed to elucidate better the efficacy and safety of performing SPSG.

Synthetic Versus Biological Mesh in Ventral Hernia Repair and Abdominal Wall Reconstruction: A Systematic Review and Recommendations from Evidence-Based Medicine.

AIM: To compare the efficacy and safety of synthetic and biological meshes in ventral hernia repair (VHR) and abdominal wall reconstruction (AWR). METHODS: We screened all clinical trials that reported the application of synthetic and biological meshes in VHR and AWR using Medline, Web of Science, and Embase (Ovid). Only comparative studies with similar baselines such as age, sex, body mass index, degree of wound contamination, and hernia defects between the intervention and control groups were included. Effect sizes with 95% confidence were pooled using a random- or fixed-effects model based on the size of heterogeneity. A sensitivity analysis was performed to test the stability of the results. RESULTS: Ten studies with 1305 participants were included. Biological meshes were associated with significantly higher recurrence rate (OR, 2.09; 95% CI 1.42-3.08; I2 = 50%), surgical site infection (OR, 1.47; 95% CI 1.10-1.97; I2 = 30%), higher re-admission rate (OR, 1.51; 95% CI 1.05-2.17; I2 = 50%), and longer length of hospital stay (SMD, 0.37; 95% CI 0.10-0.65; I2 = 72%). Similar surgical site occurrence, re-operation rate, and mesh explantation rate were observed among biological and synthetic meshes. Biological meshes have no difference in recurrence rate as compared to synthetic meshes, between the clean-contaminated, and contamination-infected fields (OR, 1.41; 95% CI 0.41-4.87 vs 3.00; 95% CI 1.07-8.46; P = 0.36). CONCLUSION: Synthetic meshes are a safe alternative to biological meshes for VHR and AWR. Considering the high cost of biological meshes, synthetic meshes are more appropriate for the VHR and AWR.

Reconstruction of Abdominal Wall Defect with Composite Scaffold of 3D Printed ADM/PLA in a Rat Model.

Abdominal wall defects are a frequently occurring condition in surgical practice. The most important are material structure and biocompatibility. In this study, polylactic acid (PLA) mesh composited with a 3D printing of acellular dermal matrix (ADM) material is used to repair abdominal wall defects. The results show that the adhesion score of ADM/PLA composite scaffolds is smaller than PLA meshes. Immunohistochemical assessment reveals that the ADM/PLA composite scaffold can effectively reduce the inflammatory response at the contact surface between the meshes and the abdominal organs. And the ADM/PLA composite scaffold can effectively reduce the expression levels of the inflammation-related factors IL-6 and IL-10. In addition, the ADM/PLA composite scaffold repair is rich in the expression levels of tissue regeneration-related factors vascular endothelial growth factor and transforming growth factor ß. Thus, ADM/PLA composite scaffolds can effectively reduce surrounding inflammation to effectively promote the repair of abdominal wall defects.

Adipose-Derived Stem Cells Based on Electrospun Biomimetic Scaffold Mediated Endothelial Differentiation Facilitating Regeneration and Repair of Abdominal Wall Defects via HIF-1α/VEGF Pathway.

Application of synthetic or biological meshes is the main therapy for the repair and reconstruction of abdominal wall defects, a common disease in surgery. Currently, no ideal materials are available, and there is an urgent need to find appropriate ones to satisfy clinical needs. Electrospun scaffolds have drawn attention in soft tissue reconstruction. In this study, we developed a novel method to fabricate a composite electrospun scaffold using a thermoresponsive hydrogel, poly (N-isopropylacrylamide)-block-poly (ethylene glycol), and a biodegradable polymer, polylactic acid (PLA). This scaffold provided not only a high surface area/volume ratio and a three-dimensional fibrous matrix but also high biocompatibility and sufficient mechanical strength, and could simulate the native extracellular matrix and accelerate cell adhesion and proliferation. Furthermore, rat adipose-derived stem cells (ADSCs) were seeded in the composite electrospun scaffold to enhance the defect repair and regeneration by directionally inducing ADSCs into endothelial cells. In addition, we found early vascularization in the process was regulated by the hypoxia inducible factor-1α (HIF-1α)/vascular endothelial growth factor (VEGF) pathway. In our study, overexpression of HIF-1α/VEGF in ADSCs using a lentivirus system promoted early vascularization in the electrospun scaffolds. Overall, we expect our composite biomimetic scaffold method will be applicable and useful in abdominal wall defect regeneration and repair in the future.

Surgical treatment strategy for locally advanced colorectal cancer with abdominal wall invasion.

BACKGROUND: The incidence of abdominal wall metastasis from colorectal cancer (CRC) is very low, but it has a poor prognosis. Despite the advances in radiotherapy, chemotherapy, and targeted therapy, patient prognosis has not improved significantly. Through surgical treatment, some patients with locally advanced CRC with abdominal wall invasion can achieve tumor-free survival or an improved quality of life. METHODS: The clinical data of 15 patients in our department from January 2015 to January 2020 were retrospectively analyzed. All patients underwent preoperative three-dimensional reconstruction of the tumor and abdominal wall after discussion with a multidisciplinary team (MDT). Patient information, including tumor size, defect size, operation time, intraoperative bleeding, hospital stay, and other factors, was collected. RESULTS: All 15 patients underwent resection followed by reconstruction for locally advanced CRC with abdominal wall invasion. The average tumor area and abdominal wall defects were 98.13±71.70 and 270.07±101.95 cm2, respectively; and accurate abdominal wall classification and zoning were obtained for all patients. The average operation time was 431.7±189.2 min, and the average blood loss was 513.3±244.6 mL. The recurrence rates in the incisional hernia and abdominal wall were 6.0% and 13.3%, respectively. The patient survival rate was 87.7%. CONCLUSIONS: Surgical treatment of locally advanced CRC with abdominal wall invasion is feasible, but requires accurate and comprehensive preoperative evaluation.

Application of 3D Visualization Technology in Complex Abdominal Wall Defects.

PURPOSE: To explore the value of medical three-dimensional visualization technology in precise preoperative assessment of complex abdominal wall defects. METHODS: The clinical data of 30 patients were analyzed retrospectively from November 2017 to December 2020 in our department. Ten patients had abdominal wall hernias and 20 patients suffered from abdominal wall tumors. CT examination was performed, and data were stored in the form of DICOM. Three-dimensional reconstruction and related data analysis were performed by Medraw software, which can accurately show the calculation of the abdominal wall defect area, abdominal wall defect classification and zoning. RESULTS: The ratio of the volume of the hernia sac to the whole abdominal volume in 10 patients with abdominal wall hernia was 4.75%. The average ratio of defect area to the whole abdominal wall in 16 patients suffered from abdominal wall tumors was 17.68%. Preoperative three-dimensional reconstruction can accurately obtain an average abdominal wall defect area of 227.83 ± 157.33 cm2 and accurate abdominal wall classification and zoning. Combined with clinical information, we can develop personalized surgical plans for patients. The average operating time was 5.39 ± 2.71 h, respectively, and the average hospital stay was 22.77 ± 11.59 days. The mean follow-up time was 21.09 ± 9.72 months. The incidence of postoperative complications was 23.33% (7/30). The recurrence rates of incisional hernias and abdominal wall tumors were 20.00% (2/10) and 15.00% (3/20), respectively. The patient survival rate was 86.67% (26/30). CONCLUSION: Three-dimensional visualization technology can be used for the accurate evaluation of patients with complex abdominal defects before surgery and can help surgeons design personalized surgical plans for patients.

Topological Structure Design and Fabrication of Biocompatible PLA/TPU/ADM Mesh with Appropriate Elasticity for Hernia Repair.

The meshes for hernia repair result in many problems that are related to complications including chronic pain and limited movement due to inadequate mechanical strength, non-absorbability, or low elasticity. In this study, degradable polylactic acid (PLA), synthetic thermoplastic polyurethane (TPU), and acellular dermal matrix (ADM) powders are combined to prepare a novel PLA/TPU/ADM mesh with three different topological structures (square, circular, and diamond) by 3D printing. The physicochemical properties and structural characteristics of mesh are studied, the results show that the diamond structure mesh with the pore size of 3 mm has sufficient elasticity and tensile strength, which provides the efficient mechanical strength required for hernia repair (16 N cm-1 ) and the value more than polypropylene(PP) mesh. Besides, in vitro and in vivo experiments demonstrate human umbilical vein endothelial cells could successfully proliferate on the PLA/TPU/ADM mesh whose biocompatibility with the host is shown using a rat model of abdominal wall defect. In conclusion, the results of this study demonstrate that the PLA/TPU/ADM mesh may be considered a good choice for hernia repair as its potential to overcome the elastic and strength challenges associated with a highly flexible abdominal wall, as well as its good biocompatibility.

Prevention of intestinal adhesion and regeneration of abdominal wall tissue with meshes containing an electrostatically spun acellular dermal matrix (ADM)/silk fibroin (SF) fiber composite polypropylene mesh.

The repair of abdominal wall defects often requires the use of polypropylene (PP) as the main material. After a PP mesh is implanted in the body, contact with the intestine can cause adhesions between the intestine and the mesh, leading to serious complications such as intestinal fistula. In this study, we used electrostatic spinning technology to coat one side of PP meshes with an electrostatically spun isolating layer of acellular dermal matrix (ADM)/silk fibroin (SF) hybrid material. These meshes were used to repair abdominal wall defects in model rats and were compared with polycaprolactone (PCL) composite polypropylene meshes and PP meshes. The results showed that the adhesion score and area of ADM/SF-PP meshes were smaller than those of PCL-PP and PP meshes. Immunohistochemical assessment revealed that the ADM/SF meshes could effectively reduce the inflammatory response at the contact surface between the meshes and abdominal organs. The tissues regenerated on the abdominal side were rich in new blood vessels. Furthermore, the ADM/SF meshes could effectively reduce the expression levels of the inflammation-related factors IL-6 and TNF-α. The expression levels of tissue regeneration-related factors, such as VEGF and PAX-7, were also higher after ADM/SF-PP mesh-mediated repair than after PCL-PP mesh and PP mesh repair. Thus, ADM/SF-PP meshes can effectively reduce the inflammatory response at the contact surface between the meshes and abdominal organs and quickly promote regeneration of abdominal surface tissue to prevent and reduce abdominal adhesion and support restoration of the abdominal wall.

Three-dimensional visualization and measurement of myopectineal orifice in non-inguinal hernia patients.

PURPOSE: The myopectineal orifice (MPO) is a weak area at lower part of the anterior abdominal wall that directly determines the mesh size required in inguinal hernia repair. However, MPO data have mainly been acquired from measurements of cadavers or anesthetized patients. Furthermore, there are very few reports on the measurement of the MPO in Chinese patients. The present study aimed to use three-dimensional visualization technology to measure the MPO in live non-anesthetized Chinese patients, and to use this information to indicate the appropriate mesh size required for inguinal hernia repair. METHODS: In this study, we used the parameters of the MPO and the pelvis that were measured in 40 patients with peripheral arterial disease of the lower limb arteries (80 inguinal regions) using Medraw software (Image Medraw Technology Co., Ltd., China). RESULTS: The result showed that the average width and height of the MPO were 5.71 ± 0.99 cm and 4.96 ± 0.69 cm, respectively (5.22 ± 0.77 cm and 5.13 ± 0.63 cm in males, and 6.20 ± 0.95 cm and 4.80 ± 0.71 cm in females). The average projected area of the MPO was 16.06 ± 4.37 cm2 on the left, and 15.61 ± 4.10 cm2 on the right (P > 0.05). CONCLUSION: Three-dimensional visualization was used to measure the area, width, and height of the MPO in living non-anesthetized Chinese patients. MPO area was correlated with age, but not with pelvic parameters.

Regenerated silk fibroin (RSF) electrostatic spun fibre composite with polypropylene mesh for reconstruction of abdominal wall defects in a rat model.

Abdominal wall defects are associated with abdominal wall surgery, infection and tumour resection. Polypropylene (PP) mesh, which has excellent mechanical strength, is currently the primary clinical repair material. In repairing the abdominal wall, the mesh can erode the bowel and cause other problems. Constructing a barrier that induces a weak inflammatory response and promotes rapid recovery of the peritoneum is important. We used electrospinning technology to construct a silk fibroin coating on the abdominal surface of a PP patch. A rat model was used to compare the inflammatory responses, regeneration of peritoneal tissue, and antiadhesion effects of electrospun regenerated silk fibroin (RSF) coatings, polycaprolactone (PCL) coatings, and noncoated PP meshes. The inflammatory responses, antiadhesion fractions, and areas of RSF and PCL were better than those of PP at 6 weeks. RSF was associated with complete peritoneal regeneration, in contrast to PCL. At 12 weeks, the structure of the PCL peritoneum was unstable, and the adhesion fraction and area were significantly higher than those of RSF. The intact peritoneum could not be effectively regenerated. The RSF group exhibited lower IL-6 levels than the PCL and PP groups but higher VEGF, IL-10 and TGF-ß levels, making RSF more conducive to the regeneration of peritoneal and abdominal wall tissues.

Antibacterial Polylactic-co-glycolic Acid Braided Threads Using Plasma and Coating Modifications for Acupoint Catgut Embedding Therapy Applications.

Polylactic-co-glycolic acid (PLGA) thread is frequently used for acupoint catgut embedding therapy (ACET), but the poor hydrophilicity and biocompatibility largely limited its wider applications. The aim of this study is to functionalize the PLGA braided thread and improve its cell adhesion property. The PLGA strands are first processed into threads on a circular braiding machine, and then, antibacterial treatment was introduced with and without oxygen plasma treatments. Afterward, functional characterizations such as antibacterial activity (Staphylococcus aureus and Escherichia coli), cytotoxicity, cell attachment and cell morphology, histological observation, and biodegradation experiments of threads were measured. Moreover, tensile properties and flexibility of the threads were determined to evaluate their mechanical properties. The modified threads showed rougher surfaces than those of the unmodified ones from SEM observations, and the weights and fiber diameters of the threads increased correspondingly, together with the improved surface hydrophilicity. All coated sutures showed durable antimicrobial function and slow drug releasing features for more than 5 days and good cell viability (more than 75%), according to the standard of ISO 10993-5:2009. Besides, cell attachment, tissue growth, and collagen regeneration of plasma-treated samples were greatly improved compared to those of without the plasma treatment. The threads presented slow degradation behavior after the antibacterial treatment. The threads with only plasma-treated revealed a promising prospect for clinical applications.

Durable and Effective Antibacterial Cotton Fabric Collaborated with Polypropylene Tissue Mesh for Abdominal Wall Defect Repair.

A feasible, efficient antibacterial and anti-infective mesh for clinical abdominal wall defect repair is significant, but challenging due to the complexity of the postoperative wound environment. Herein, a simple strategy was provided to construct woven cotton fabric modified with gentamicin (Gem) via the enamine bonds. The obtained cotton fabric possessed favorable antibacterial properties against E. coli and S. aureus with the bactericidal rate of over 99.99% and could be combined with a commercial polypropylene (PP) mesh to serve as a two-layer composite mesh for abdominal wall defect repair. The antibacterial cotton layer was systematically characterized by FTIR, XPS, SEM, EDS, and mechanical measurements. The C2C12 cells and human fibroblasts were employed to assess the cytocompatibility of the composite mesh in vitro. Furthermore, the rat abdominal wall defect model was used to evaluate the efficacy of antibacterial and anti-infection properties. It was demonstrated that the two-layer composite mesh possessed favorable biocompatibility and satisfactory anti-infection properties involved in abdominal wall defect repair. Therefore, this synergetic two-layer composite mesh would out-perform surgical PP meshes in preventing infectious complications.

The relationship between the asymmetric magnetoresistive effect and the magnetocaloric effect in Ni43Co7Mn39-xCrxSn11 Heusler alloys.

The correlation between the magnetocaloric effect and magnetotransport property was investigated in Ni43Co7Mn39-xCrxSn11 Heusler alloys. The asymmetric isothermal-magnetoresistance around the phase transformation temperature was observed, from which a parameter γ, determined as the ratio of the asymmetric magnetoresistance to the temperature coefficient of resistance, is proposed. According to Maxwell's equation, the parameter γ is analyzed to be equivalent to the transformation temperature change induced by a magnetic field in martensitic transformation. This finding is confirmed by experimental results. In addition, the γ values can be used to estimate the magnetic entropy change of the martensitic transformation directly without measuring the comprehensive temperature dependence of magnetization curves.

Ultrafast Bubble-Propelled and Magnetic-Field-Navigated Porous Catalytic Janus Micromotor.

In this study, a bubble-propelled catalytic Janus micromotor is demonstrated. This micromotor is magnetically controllable and is capable of both organics absorption and delivery. The motor is fabricated by a low-cost and eco-friendly physical method free from chemical reactions. Such a micromotor is effectively propelled by bubbles generated from hydrogen peroxide decomposition. Applied with a controlled magnetic field, the motor can travel along designed trajectories. An ultrafast travelling speed of up to 3.3 mm/s (∼320 body length) was reached in 6.3% (wt%) H2O2 solution. Additionally, Rodamine B was chosen as a target organic to proof the collection and transportation performance. The collection and release cycle of target organic is repeated for more than 25 times. This result reveals that the motor is efficient in organic absorption and transportation, indicating that the micromotor is promising in water decontamination and targeted drug delivery.