Biocatalytic synthesis of oxa(thia)diazole aryl thioethers.

A novel approach for the synthesis of 1,3,4-oxa(thia)diazole aryl thioethers through a biocatalytic strategy has been introduced. By leveraging Myceliophthora thermophila laccase (Novozym 51003) as a catalyst, catechol undergoes oxidation to ortho-quinone, facilitating subsequent 1,4-thia-Michael addition reactions. The method offers efficiency and mild reaction conditions, demonstrating promise for sustainable synthesis pathways in organic chemistry. Using this approach, 13 new derivatives of 2,5-disubstituted-1,3,4-oxa(thia)diazole aryl thioethers, with a yield of 46-94%, were synthesized.

The influence of realistic 3D mantle viscosity on Antarctica's contribution to future global sea levels.

The response of the Antarctic Ice Sheet (AIS) to climate change is the largest uncertainty in projecting future sea level. The impact of three-dimensional (3D) Earth structure on the AIS and future global sea levels is assessed here by coupling a global glacial isostatic adjustment model incorporating 3D Earth structure to a dynamic ice-sheet model. We show that including 3D viscous effects produces rapid uplift in marine sectors and reduces projected ice loss for low greenhouse gas emission scenarios, lowering Antarctica's contribution to global sea level in the coming centuries by up to ~40%. Under high-emission scenarios, ice retreat outpaces uplift, and sea-level rise is amplified by water expulsion from Antarctic marine areas.

Nanofabrication of chitosan-based dressing to treat the infected wounds: in vitro and in vivo evaluations.

Aim: Here, an innovative kind of antibacterial nanocomposite film is developed by incorporating graphene oxide and zinc oxide into chitosan matrix. Materials & methods: Our dressing was fabricated using the solution casting method. Fourier transform infrared spectra and TGA-DTG clearly confirmed the structure of film dressing. Results & conclusion: Our results showed the tensile strength and elongation at the break of the films were 20.1 ± 0.7 MPa and 36 ± 10%, respectively. Our fabricated film could absorb at least three-times the fluid of its dry weight while being biocompatible, antibacterial, non-irritant and non-allergic. In addition, it accelerated the healing process of infected wounds by regulating epithelium thickness and the number of inflammatory cells, thus it may be useful for direct application to damaged infected wounds.

In this study, an innovative kind of antibacterial nanocomposite film is developed by incorporating graphene oxide and zinc oxide into chitosan matrix. Our antibacterial wound dressing was fabricated using the solution casting method. Our fabricated film could absorb at least three-times the fluid of its dry weight while being biocompatible, antibacterial, non-irritant and non-allergic. In addition, our film accelerated the healing process of infected wounds by regulating epithelium thickness and the number of inflammatory cells. thus it may be useful for direct application to damaged infected wounds.

The effect of carbon chain length of cross-linking agent on the functionality of carrier- free immobilized Thermomyces lanuginosa lipase particles.

The cross-linked enzyme (CLEs) of Thermomyces lanuginosa lipase (TLL) was prepared in an isocyanide-based multi-component reactions (ICMRs) platform by applying three di-acidic cross-linkers to unveil more factors contributing to the functional properties of CLEs. The linkers were 1,11-undecanedicarboxylic acid, azelaic acid, and adipic acid with 11, 7, and 4 carbon lengths, respectively, providing a proper tool to investigate the effect of linker length on the activity, stability, and selectivity of the resulting CLEs. The immobilization yields of 60-90 % and the specific activities of 168, 88.4 and 49 U/mg were obtained for the CLEs of 1,11-undecanedicarboxylic acid, azelaic acid, adipic acid, respectively. The lower activity of azelaic and adipic acid-mediated CLEs compared to the soluble TLL (110 U/mg) was explained by in silico calculations. The results revealed that as opposed to 1,11-undecanedicarboxylic acid, both linkers tended to penetrate the enzyme active site, thus resulting in a major inhibitory effect on the enzyme functionality. The thermal and co-solvent stability of the immobilized derivatives improved compared to those of free TLL. The selectivity of CLEs was also examined by catalytic release of main omega-3 fatty acids from fish oil, presenting the highest selectivity of 22 for the CLEs of azelaic acid.

Environmental Surveillance of Poliovirus and Non-polio Enteroviruses in Iran, 2017-2023: First Report of Imported Wild Poliovirus Type 1 Since 2000.

In Iran, which is at high risk of the Wild Poliovirus (WPV) and Vaccine-Derived Poliovirus (VDPV) importation due to its neighborhood with two polio endemic countries, Pakistan and Afghanistan, Environmental Surveillance (ES) was established in November 2017. Sistan-Balouchestan province was chosen for the ES due to its vicinity with Pakistan and Afghanistan. Five sewage collection sites in 4 cities (Zahedan, Zabol, Chabahar and Konarak) were selected in the high-risk areas. Since the establishment of ES in November 2017 till the end of 2023, 364 sewage specimens were collected and analyzed. The ES detected polioviruses which have the highest significance for polio eradication program, that is, Wild Poliovirus type 1 (WPV1) and Poliovirus type 2 (PV2). In April and May 2019, three of 364 (0.8%) sewage specimens from Konarak were positive for imported WPV1. According to phylogenetic analysis, they were highly related to WPV1 circulating in Karachi (Sindh province) in Pakistan. PV2 was also detected in 5.7% (21/364) of the sewage specimens, most of which proved to be imported from the neighboring countries. Of 21 isolated PV2s, 7 were VDPV2, of which 5 proved to be imported from the neighboring countries as there was VDPV2 circulating in Pakistan at the time of sampling, and 2 were ambiguous VDPVs (aVDPV) with unknown source. According to the findings of this study, as long as WPV1 and VDPV2 outbreaks are detected in Iran's neighboring countries, there is a definite need for continuation and expansion of the environmental surveillance.

Investigating the synthesis parameters of durian skin-based activated carbon and the effects of silver nanocatalysts on its recyclability in methylene blue removal.

Activated carbon (AC) is the most common and economically viable adsorbent for eliminating toxic organic pollutants, particularly dyes, from wastewater. Its widespread adoption is due to the simplicity and affordable production of AC, wherein low-cost agricultural wastes, such as durian skin can be used. Converting durian skin into AC presents a promising solution for its solid waste management. However, inherent drawbacks such as its non-selectivity, relatively short lifespan and laborious replacement and recovery processes diminish the overall efficacy of AC as an adsorbent. To address these challenges, the immobilisation of metal nanocatalysts such as silver nanoparticles (AgNPs) is one of the emerging solutions. AgNPs can facilitate the regeneration of the adsorption sites of AC by catalysing the conversion of the adsorbed dyes into harmless and simpler molecules. Nevertheless, the immobilisation of AgNPs on AC surface can be challenging as the pore size formation of AC is hard to control and the nanomaterials can easily leach out from the AC surface. Hence, in this study, we synthesised AC from durian skin (DS) and immobilised AgNPs on the AC-DS surface. Then, we used methylene blue (MB) removal for studying the adsorption capability and recyclability of the AC-DS. In the synthesis of AC-DS, the influences of reaction temperature, activating agent, and acid-washing to its capability in adsorptive removal of  MB in solution were first determined. It was found that 400 °C, KOH activating agent, and the presence of acid-washing (50% of HNO3) resulted in AC-DS with the highest percentage of MB removal (91.49 ± 2.86%). Then, the overall results from three recyclability experiments demonstrate that AC-DS with immobilised AgNPs exhibited higher MB removal after several cycles (up to 6 cycles) as compared to AC-DS alone, proving the benefit of AgNPs for the recyclability of AC-DS. We also found that AgNPs/Citrate@AC-DS exhibited better adsorption capability and recyclability as compared to AgNPs/PVP@AC-DS indicating significant influences of type of stabilisers in this study. This study also demonstrates that the presence of more oxygen-containing functional groups (i.e., carboxyl and hydroxyl functional groups) after acid-washing on AC-DS and in citrate molecules, has greater influence to the performance of AC-DS and AgNPs/Citrate@AC-DS in the removal of MB as compared to the influences of their BET surface area and pore structure. The findings in this study have the potential to promote and serve as a guideline for harnessing the advantages of nanomaterials, such as AgNPs, to enhance the properties of AC for environmental applications.

Exploring biodiversity patterns at the landscape scale by linking landscape energy and land use/land cover heterogeneity.

Agricultural Biodiversity dynamics has been evaluated by social metabolism or by landscape structure-function analysis. In this study, by using ELIA modeling, we used both methods in combination to understand how the interplay between social metabolism and landscape structure-function can affect biodiversity pattern distribution. We used energy reinvestment (E) as an indicator of social metabolism and landscape heterogeneity (Le) as an indicator of landscape structure-function. We propose a research hypothesis to analyze biodiversity patterns considering four different clusters identified based on high or low E or Le. As cluster 1, we defined E as high and Le as low and associated natural ecosystems to it. These ecosystems are expected to contain high species abundance but low richness. As cluster 2, both E and Le were defined as high and semi-natural ecosystems were associated to it, where nature friendly farm system developed. In these ecosystems, high species abundance and richness are expected. Cluster 3 with low E and Le was associated intensive farmland, which is due to the simplification of the landscape. Here, low energy reinvestment and landscape heterogeneity confirm that ecosystem services related to biodiversity have been drastically reduced. Lastly, cluster 4 with low E but high Le refers to intensive mosaics of farmland and pasture. In this cluster, the biodiversity richness index is high due to spatial landscape diversity, but the biodiversity abundance index is low due to the lack of energy reinvestment. We evaluate the proposed hypothesis for biodiversity analysis in the Qazvin province, emphasizing the interplay between energy availability and landscape heterogeneity in shaping ecological communities. This study highlights the importance of understanding biodiversity patterns at spatial scale and emphasizes the need for interdisciplinary research to address conservation and sustainability challenges. Our approach would be very useful where there is lack of biodiversity data.

A multi-component reaction for covalent immobilization of lipases on amine-functionalized magnetic nanoparticles: production of biodiesel from waste cooking oil.

A new approach was used for the immobilization of Thermomyces lanuginosus lipase (TLL), Candida antarctica lipase B (CALB), and Rhizomucor miehei lipase (RML) on amine-functionalized magnetic nanoparticles (Fe3O4@SiO2-NH2) via a multi-component reaction route (using cyclohexyl isocyanide). The used method offered a single-step and very fast process for covalent attachment of the lipases under extremely mild reaction conditions (25 °C, water, and pH 7.0). Rapid and simple immobilization of 20 mg of RML, TLL, and CALB on 1 g of the support produced 100%, 98.5%, and 99.2% immobilization yields, respectively, after 2 h of incubation. The immobilized derivatives were then used for biodiesel production from waste cooking oil. Response surface methodology (RSM) in combination with central composite rotatable design (CCRD) was employed to evaluate and optimize the biodiesel production. The effect of some parameters such as catalyst amount, reaction temperature, methanol concentration, water content for TLL or water-adsorbent for RML and CALB, and ratio of t-butanol (wt%) were investigated on the fatty acid methyl esters (FAME) yield.