Enhancing the field-of-view of spectral-scanning FMCW LiDAR by multipass configuration with an echelle grating.

We present a spectral-scanning frequency-modulated continuous wave (FMCW) 3D imaging system capable of producing high-resolution depth maps with an extended field of view (FOV). By employing a multipass configuration with an echelle grating, the system achieves an FOV of 5.5° along the grating axis. The resulting depth maps have a resolution of 70 × 40 pixels, with a depth resolution of 5.1 mm. The system employs an echelle grating for beam steering and leverages the multipass configuration for angular FOV magnification. Quantitative depth measurements and 3D imaging results of a static 3D-printed depth variation target are demonstrated. The proposed approach offers a promising solution for enhancing the FOV of spectral-scanning FMCW LiDAR systems within a limited wavelength-swept range, thereby reducing system complexity and cost, paving the way for improved 3D imaging applications.

The value of dynamic FDG PET/CT in the differential diagnosis of lung cancer and predicting EGFR mutations.

OBJECTIVES: 18F-fluorodeoxyglucose (FDG) PET/CT has been widely used for the differential diagnosis of cancer. Semi-quantitative standardized uptake value (SUV) is known to be affected by multiple factors and may make it difficult to differentiate between benign and malignant lesions. It is crucial to find reliable quantitative metabolic parameters to further support the diagnosis. This study aims to evaluate the value of the quantitative metabolic parameters derived from dynamic FDG PET/CT in the differential diagnosis of lung cancer and predicting epidermal growth factor receptor (EGFR) mutation status. METHODS: We included 147 patients with lung lesions to perform FDG PET/CT dynamic plus static imaging with informed consent. Based on the results of the postoperative pathology, the patients were divided into benign/malignant groups, adenocarcinoma (AC)/squamous carcinoma (SCC) groups, and EGFR-positive (EGFR+)/EGFR-negative (EGFR-) groups. Quantitative parameters including K1, k2, k3, and Ki of each lesion were obtained by applying the irreversible two-tissue compartmental modeling using an in-house Matlab software. The SUV analysis was performed based on conventional static scan data. Differences in each metabolic parameter among the group were analyzed. Wilcoxon rank-sum test, independent-samples T-test, and receiver-operating characteristic (ROC) analysis were performed to compare the diagnostic effects among the differentiated groups. P < 0.05 were considered statistically significant for all statistical tests. RESULTS: In the malignant group (N = 124), the SUVmax, k2, k3, and Ki were higher than the benign group (N = 23), and all had-better performance in the differential diagnosis (P < 0.05, respectively). In the AC group (N = 88), the SUVmax, k3, and Ki were lower than in the SCC group, and such differences were statistically significant (P < 0.05, respectively). For ROC analysis, Ki with cut-off value of 0.0250 ml/g/min has better diagnostic specificity than SUVmax (AUC = 0.999 vs. 0.70). In AC group, 48 patients further underwent EGFR testing. In the EGFR (+) group (N = 31), the average Ki (0.0279 ± 0.0153 ml/g/min) was lower than EGFR (-) group (N = 17, 0.0405 ± 0.0199 ml/g/min), and the difference was significant (P < 0.05). However, SUVmax and k3 did not show such a difference between EGFR (+) and EGFR (-) groups (P>0.05, respectively). For ROC analysis, the Ki had a cut-off value of 0.0350 ml/g/min when predicting EGFR status, with a sensitivity of 0.710, a specificity of 0.588, and an AUC of 0.674 [0.523-0.802]. CONCLUSION: Although both techniques were specific, Ki had a greater specificity than SUVmax when the cut-off value was set at 0.0250 ml/g/min for the differential diagnosis of lung cancer. At a cut-off value of 0.0350 ml/g/min, there was a 0.710 sensitivity for EGFR status prediction. If EGFR testing is not available for a patient, dynamic imaging could be a valuable non-invasive screening method.

Extended ray-mapping method based on differentiable ray-tracing for non-paraxial and off-axis freeform illumination lens design.

The ray-mapping method has been widely used for designing freeform illumination lenses. However, in non-paraxial or off-axis situations, it remains challenging to obtain an integrable ray-mapping, often requiring a complex iterative correction process for the initial mapping. To address this challenge, we propose an extended ray-mapping method that incorporates differentiable ray-tracing into the design pipeline of the ray-mapping method. This enables accurate surface construction according to ray-mapping and efficient shape correction based on irradiance distribution. The proposed method involves two optimization stages. In the first stage, the freeform surface is preliminarily optimized to closely match the optimal transport mapping. The obtained freeform surface is then further optimized in the second stage to minimize the divergence between the target and simulated irradiance distributions. Additionally, the mean curvature of the freeform surface is also constrained in the second stage to facilitate the fabrication of the final freeform surface. Non-paraxial illumination lenses and off-axis illumination lenses have been designed using the proposed method within ten minutes, and simulations demonstrate that the approach is effective and robust.

Comparative transcriptome and antioxidant biomarker response reveal molecular mechanisms to cope with zinc ion exposure in the unicellular eukaryote Paramecium.

The development of industry has resulted in excessive environmental zinc exposure which has caused various health problems in a wide range of organisms including humans. The mechanisms by which aquatic microorganisms respond to environmental zinc stress are still poorly understood. Paramecium, a well-known ciliated protozoan and a popular cell model in heavy metal stress response studies, was chosen as the test unicellular eukaryotic organism in the present research. In this work, Paramecium cf. multimicronucleatum cells were exposed in different levels of zinc ion (0.1 and 1.0 mg/L) for different periods of exposure (1 and 4 days), and then analyzed population growth, transcriptomic profiles and physiological changes in antioxidant enzymes to explore the toxicity and detoxification mechanisms during the zinc stress response. Results demonstrated that long-term zinc exposure could have restrained population growth in ciliates, however, the response mechanism to zinc exposure in ciliates is likely to show a dosage-dependent and time-dependent manner. The differentially expressed genes (DEGs) were identified the characters by high-throughput sequencing, which remarkably enriched in the phagosome, indicating that the phagosome pathway might mediate the uptake of zinc, while the pathways of ABC transporters and Na+/K+-transporting ATPase contributed to the efflux transport of excessive zinc ions and the maintenance of osmotic balance, respectively. The accumulation of zinc ions triggered a series of adverse effects, including damage to DNA and proteins, disturbance of mitochondrial function, and oxidative stress. In addition, we found that gene expression changed significantly for metal ion binding, energy metabolism, and oxidation-reduction processes. RT-qPCR of ten genes involved in important biological functions further validated the results of the transcriptome analysis. We also continuously monitored changes in activity of four antioxidant enzymes (SOD, CAT, POD and GSH-PX), all of which peaked on day 4 in cells subjected to zinc stress. Collectively, our results indicate that excessive environmental zinc exposure initially causes damage to cellular structure and function and then initiates detoxification mechanisms to maintain homeostasis in P. cf. multimicronucleatum cells.

Single-cell transcriptome reveals cell division-regulated hub genes in the unicellular eukaryote Paramecium.

The transition from growth to division during the cell cycle encompasses numerous conserved processes such as large-scale DNA replication and protein synthesis. In ciliate cells, asexual cell division is accompanied by additional cellular changes including amitotic nuclear division, extensive ciliogenesis, and trichocyst replication. However, the molecular mechanisms underlying these processes remain elusive. In this study, we present single-cell gene expression profiles of Paramecium cf. multimicronucleatum cells undergoing cell division. Our results reveal that the most up-regulated genes in dividing cells compared to growing cells are associated with 1) cell cycle signaling pathways including transcription, DNA replication, chromosome segregation and protein degradation; 2) microtubule proteins and tubulin glycylases which are essential for ciliogenesis, nuclei separation and structural differentiation signaling; and 3) trichocyst matrix proteins involved in trichocyst synthesis and reproduction. Furthermore, weighted gene co-expression network analysis identified hub genes that may play crucial roles during cell division. Our findings provide insights into cell cycle regulators, microtubules and trichocyst matrix proteins that may exert influence on this process in ciliates.

Dynamic FDG-PET imaging for differentiating metastatic from non-metastatic lymph nodes of lung cancer.

Objectives: 18F-fluorodeoxyglucose (FDG) PET/CT has been widely used in tumor diagnosis, staging, and response evaluation. To determine an optimal therapeutic strategy for lung cancer patients, accurate staging is essential. Semi-quantitative standardized uptake value (SUV) is known to be affected by multiple factors and may fail to differentiate between benign and malignant lesions. Lymph nodes (LNs) in the mediastinal and pulmonary hilar regions with high FDG uptake due to granulomatous lesions such as tuberculosis, which has a high prevalence in China, pose a diagnostic challenge. This study aims to evaluate the diagnostic value of the quantitative metabolic parameters derived from dynamic 18F-FDG PET/CT in differentiating metastatic and non-metastatic LNs in lung cancer. Methods: One hundred and eight patients with pulmonary nodules were enrolled to perform 18F-FDG PET/CT dynamic + static imaging with informed consent. One hundred and thirty-five LNs in 29 lung cancer patients were confirmed by pathology. Static image analysis parameters including LN-SUVmax, LN-SUVmax/primary tumor SUVmax (LN-SUVmax/PT-SUVmax), mediastinal blood pool SUVmax (MBP-SUVmax), LN-SUVmax/MBP-SUVmax, and LN-SUVmax/short diameter. Quantitative parameters including K1, k2, k3 and Ki and of each LN were obtained by applying the irreversible two-tissue compartment model using in-house Matlab software. Ki/K1 was computed subsequently as a separate marker. We further divided the LNs into mediastinal LNs (N=82) and pulmonary hilar LNs (N=53). Wilcoxon rank-sum test or Independent-samples T-test and receiver-operating characteristic (ROC) analysis was performed on each parameter to compare the diagnostic efficacy in differentiating lymph node metastases from inflammatory uptake. P<0.05 were considered statistically significant. Results: Among the 135 FDG-avid LNs confirmed by pathology, 49 LNs were non-metastatic, and 86 LNs were metastatic. LN-SUVmax, MBP-SUVmax, LN-SUVmax/MBP-SUVmax, and LN-SUVmax/short diameter couldn't well differentiate metastatic from non-metastatic LNs (P>0.05). However, LN-SUVmax/PT-SUVmax have good performance in the differential diagnosis of non-metastatic and metastatic LNs (P=0.039). Dynamic metabolic parameters in addition to k3, the parameters including K1, k2, Ki, and Ki/K1, on the other hand, have good performance in the differential diagnosis of metastatic and non-metastatic LNs (P=0.045, P=0.001, P=0.001, P=0.001, respectively). For ROC analysis, the metabolic parameters Ki (AUC of 0.672 [0.579-0.765], sensitivity 0.395, specificity 0.918) and Ki/K1 (AUC of 0.673 [0.580-0.767], sensitivity 0.570, specificity 0.776) have good performance in the differential diagnosis of metastatic from non-metastatic LNs than SUVmax (AUC of 0.596 [0.498-0.696], sensitivity 0.826, specificity 0.388), included the mediastinal region and pulmonary hilar region. Conclusion: Compared with SUVmax, quantitative parameters such as K1, k2, Ki and Ki/K1 showed promising results for differentiation of metastatic and non-metastatic LNs with high uptake. The Ki and Ki/K1 had a high differential diagnostic value both in the mediastinal region and pulmonary hilar region.

LiDAR integrated IR OWC system with the abilities of user localization and high-speed data transmission.

By using narrow infrared (IR) optical beams, optical wireless communication (OWC) system can realize ultra-high capacity and high-privacy data transmission. However, due to the point-to-point connection approach, a high accuracy localization system and beam-steering antenna (BSA) are required to steer the signal beam to user terminals. In this paper, we proposed an indoor beam-steering IR OWC system with high accuracy and calibration-free localization ability by employing a coaxial frequency modulated continuous wave (FMCW) light detection and ranging (LiDAR) system. In the meantime, benefitting from the mm-level ranging accuracy of the LiDAR system, a useful approach to assess the feasibility of the link alignment between beam-steering antenna and users is first demonstrated. With the assistance of the LiDAR system, we experimentally achieved the localization of user terminals with a 0.038-degree localization accuracy and on-off keying (OOK) downlink error-free transmission of 17 Gb/s in free space at a 3-m distance is demonstrated. The highest transmission data rate under the forward error correction (FEC) criterion (Bit error rate (BER) <3.8×103) can reach 24 Gb/s.

Multi-user accessible indoor infrared optical wireless communication systems employing VIPA-based 2D optical beam-steering technique.

Infrared optical wireless communication system can achieve ultrahigh capacity and high privacy data transmission. However, for using narrow infrared laser beam as carrier to transmit signal, the high-speed data transmission can only be achieved by point-to-point connection. With the rapid number increasement of consumer electronic devices, such connection method puts a heavy burden on the number of transmitters. Thus, the transmitting end with the point-to-multipoint capability or multi-user accessibility is required. In this paper, we present a multi-user accessible indoor infrared optical wireless communication system employing passive diffractive optics based on a virtually imaged phased array (VIPA). Multiple beams can be generated in a point-to-multipoint scheme by using VIPA-based beam-steering antenna (BSA). On the other hand, by tuning wavelength of laser source, fast 2D steering of multiple beams with the same steering trajectory is supported, which can be used for user ends with changing locations. In the experiment, 5 beams are generated by utilizing only one transmitter. All five beams can realize 12.5 Gb/s on-off-keying (OOK) data rate transmission. Free-space optical wireless transmission at 3.6-m communication distance is demonstrated for system performance verification and evaluation. a total 3.44°×7.9° scanning field of view of five beams is achieved.

Solid-state FMCW LiDAR with two-dimensional spectral scanning using a virtually imaged phased array.

The beam-steering device is a critical component in LiDAR systems for 3D imaging. Solid-state beam-steering devices attract the most attention for their advantages of robustness, fast beam-steering speed, and stability. However, solid-state beam-steering devices, such as optical phased arrays (OPAs), are challenging to realize 2D scanning ability. Here we employed a virtually imaged phased array (VIPA) in the LiDAR system to realize all solid-state two-dimensional (2D) beam-steering based on dispersion only. A frequency swept laser source is used for performing optical frequency-modulated continuous-wave (FMCW) ranging and 2D beam steering simultaneously. The 2D disperser is compact and can be easily implemented owing to its simple structure. The mechanism of continuous scanning and ranging is beneficial for obtaining high lateral resolution, and a lateral resolution of 0.06° is achieved. 3D maps of the object at a distance of 2 m are obtained with cm-level ranging precision. The frame rate of the proposed LiDAR system only depends on the wavelength-tuning speed of the swept laser source, with the potential to realize ultrafast solid-state LiDAR systems.

Virtually imaged phased-array-based 2D nonmechanical beam-steering device for FMCW LiDAR.

Nonmechanical beam-steering devices are of importance to achieve fast, compact, and reliable LiDAR. We propose a 2D nonmechanical beam-steering device based on a virtually imaged phased array (VIPA) for frequency-modulated continuous-wave (FMCW) LiDAR. In the design, 2D nonmechanical beam steering and high-resolution FMCW ranging can be achieved at the same time by wavelength tuning. The design formulas of the VIPA-based 2D disperser are greatly simplified by introducing appropriate approximation, and a feasible design procedure is proposed for the first time, to the best of our knowledge. Based on the proposed method, several design examples with different optimal properties are exhibited.