Marine sources of formaldehyde in the coastal atmosphere.

Elevated concentrations of formaldehyde and other carbonyl compounds are frequently observed in the marine atmosphere but are often significantly underestimated by atmospheric models. To evaluate the potential impact of marine sources on atmospheric formaldehyde, high-resolution measurements were conducted at a coastal site (∼15 m from the sea) during the summer in Qingdao, China. Observed formaldehyde levels averaged 2.4 ± 0.9 ppbv (1 ppbv = 10-9 L L-1), with peaks reaching 6.8 ppbv. Backward trajectories indicate that formaldehyde concentrations remained high in marine air masses. Formaldehyde exhibited weak correlations with primary pollutants such as NO and CO but showed strong correlations with marine tracers, notably methyl ethyl ketone and 1-butene. Chamber experiments confirmed that the photodecomposition of Enteromorpha released large amounts of formaldehyde and marine tracer species. When normalized to acetylene, the levels of formaldehyde, 1-butene, and MEK increased by factors of 3.8, 8.1, and 3.5, respectively. Results from an observation-based chemical box model simulation, which utilizes the Master Chemical Mechanism (MCM), revealed that formaldehyde contributes 56% to the primary source of HO2 radicals, while neglecting formaldehyde chemistry would lead to a 15% reduction in coastal ozone production rates. This study interlinks oceanic biology and atmospheric chemistry, advancing the understanding of the ocean's role as a significant source of organic compounds and its contribution to carbon cycling.

Enhancing Two-Photon Excited Fluorescence of Metal-Organic Framework Single Crystals through Modulation of Inorganic Nodes.

Regulation of the two-photon excited fluorescence (TPEF) emission intensity and wavelength of metal-organic framework (MOF) crystals with similar constitutions presents a significant challenge. In this study, two MOFs, Zn-BTPPA and Cd3-BTPPA, were constructed using tetrakis(1,1'-biphenyl-4-carboxylic acid)-1,4-benzenediamine (H4BTPPA) as the organic ligand and mononuclear Zn and trinuclear Cd3 inorganic nodes, respectively. The incorporation of H4BTPPA within the MOF structures enables effective TPEF emission in both Zn-BTPPA and Cd3-BTPPA. The TPEF results show that Zn-BTPPA and Cd3-BTPPA exhibited strong emissions at 523 and 463 nm, respectively, when excited with a 780 nm laser. Moreover, Zn-BTPPA and Cd3-BTPPA exhibited much higher two-photon absorption cross sections, approximately 4.9 and 5.2 times higher than that of the reported dinuclear MOF, Cd2-BTPPA, with a similar composition, respectively. With different inorganic nodes, the stacking of chromophores, π···π interactions, and ligand geometry were found to correlate with the enhanced TPEF in Cd3-BTPPA and the blue-shifted TPEF in Zn-BTPPA. This work serves as an inspiration for designing efficient TPEF MOF materials based on the structure-property relationship.

Identification and analgesic activity study of analgesic protein â ¦-2 from Naja naja atra venom.

Background: Acid-sensing ion channel 1a (ASIC1a) plays a critical role in physiological and pathological processes. To further elucidate the biological functions of ASICs and their relationships with disease occurrence and development, it is advantageous to investigate and develop additional regulatory factors for ASICs. Methods: In this study, cation exchange chromatography was used to separate seven chromatographic components from Naja naja atra venom. Capillary electrophoresis was employed to detect that Ⅶ peak component containing a main protein Ⅶ-2, which could bind to ASIC1a. The analgesic effects of Ⅶ-2 protein were determined using hot plate methods, and ASIC1a expression in spinal cord tissue from rats with inflammatory pain was detected using western blot. Results: The purified Ⅶ-2 protein named Naja naja atra venom-Ⅶ-2 (NNAV-Ⅶ-2) was obtained by Sephadex G-50 gel filtration, which exhibited a single band on sodium dodecyl sulfate-polyacrylamide gel electrophoresis with a molecular weight of 6.7 kD. Remarkably, the NNAV-Ⅶ-2 protein demonstrated a significant analgesic effect and downregulated ASIC1a expression in the spinal cord tissue of rats with inflammatory pain. Conclusions: The analgesic mechanism of the NNAV-Ⅶ-2 protein may be associated with its binding to ASIC1a, consequently downregulating ASIC1a expression in neural tissues.

Fabrication of Scalable Covalent Organic Framework Membrane-based Electrolytes for Solid-State Lithium Metal Batteries.

The conventional covalent organic framework (COF)-based electrolytes with tailored ionic conducting behaviors are typically fabricated in the powder morphology, requiring further compaction procedures to operate as solid electrolyte tablets, which hinders the large-scale manufacturing of COF materials. In this study, we present a feasible electrospinning strategy to prepare scalable, self-supporting COF membranes (COMs) that feature a rigid COF skeleton bonded with flexible, lithiophilic polyethylene glycol (PEG) chains, forming an ion conduction network for Li+ transport. The resulting PEG-COM electrolytes exhibit enhanced dendrite inhibition and high ionic conductivity of 0.153 mS cm-1 at 30 °C. The improved Li+ conduction in PEG-COM electrolytes stems from the loose ion pairing in the structure and the production of higher free Li+ content, as confirmed by solid-state 7Li NMR experiments. These changes in the local microenvironment of Li+ facilitate its directional movement within the COM pores. Consequently, solid-state symmetrical Li|Li, Li|LFP, and pouch cells demonstrate excellent electrochemical performance at 60 °C. This strategy offers a universal approach for constructing scalable COM-based electrolytes, thereby broadening the practical applications of COFs in solid-state lithium metal batteries.

Construction of a redox-active metal-organic framework with an octanuclear lithium one-dimensional building block.

A stable lithium metal-organic framework, constructed using a redox-active N,N,N',N'-tetrakis(4-carboxyphenyl)-1,4-phenylenediamine linker and Li8 cluster-based one-dimensional rod secondary building unit, exhibits good stability and reversible redox activity. The Li8-MOF, which can be oxidized by AgNO3, has the potential to function as an electrochromic device, thereby advancing the development of smart MOF materials.

Application of Three-Dimensional Printing Technology in the Perioperative Management of Cardiac Tumours: A Review and Analysis.

Background: Multimodal imaging plays a crucial role in evaluating suspected cardiac tumours. In recent years, three-dimensional (3D) printing technology has continued to advance such that image-based 3D-printed models have been incorporated into the auxiliary diagnosis and treatment of cardiac tumour diseases. The purpose of this review is to analyze the existing literature on the application of 3D printing in cardiac tumour surgery to examine the current status of the application of this technology. Methods: By searching PubMed, Cochrane, Scopus and Google Scholar, as well as other resource databases, a completed review of the available literature was performed. Effect sizes from published studies were investigated, and results are presented concerning the use of 3D surgical planning in the management of cardiac tumours. Results: According to the reviewed literature, our study comes to the point that 3D printing is a valuable technique for planning surgery for cardiac tumours. As shown in the review report, Mucinous and sarcomatous tumours are the most commonly used tumours for 3D printing, magnetic resonance imaging (MRI) and computed tomography (CT) are the most commonly used technologies for preparing 3D printing models, the main printing technology is stereolithography, and the most used 3D modeling software is Mimics. The printing time and cost required for 3D printing are affected by factors such as the size of the type, complexity, the printed material and the 3D printing technology used. The reported research shows that 3D printing can understand the anatomy of complex tumour cases, virtual surgical simulation, as well as facilitate doctor-patient communication and clinical teaching. Conclusions: These results show that the development of 3D printing technology has brought more accurate and safe perioperative treatment options for patients with cardiac tumours. Therefore, 3D printing technology is expected to become a routine clinical diagnosis and treatment tool for cardiac tumours.

[Research status and rapid detection methods of antibiotic residues in agricultural products]. / å†œäº§å“æŠ—ç”Ÿç´ æ®‹ç•™çŽ°çŠ¶åŠå¿«é€Ÿæ£€æµ‹æ–¹æ³•ç ”ç©¶è¿›å±•.

Antibiotics are widely utilized in agriculture for the prevention and treatment of animal diseases. How-ever, the abuse and overuse of antibiotics progressively increase the risks of antibiotic residues and antibiotic resis-tance. The bioaccumulation and biomagnification of antibiotics through food chains will negatively affect ecological safety, and finally threaten human health. There are many shortages of traditional antibiotic detection techniques, such as complex procedures, complicated operation and time consuming, and thus are difficult to meet the demand of instant, efficient and accurate on-site detection. Therefore, it is crucial to develop rapid detection techniques of antibiotics to manage the application of antibiotics in agriculture. We reviewed the utilization, and management of antibiotics in animal husbandry, residual characteristics, and potential hazards of antibiotics in agricultural products, summarized the advancements in rapid detection techniques of antibiotics in agricultural products over the past five years, compared the advantages and disadvantages of different rapid detection techniques, and prospected the future development in this area. This review would provide a valuable reference to the control and point-of-care test of antibiotics in agricultural products.

Bispecific antibodies targeting two glycoproteins on SFTSV exhibit synergistic neutralization and protection in a mouse model.

Severe fever with thrombocytopenia syndrome (SFTS) is an emerging infectious disease with a high fatality rate of up to 30% caused by SFTS virus (SFTSV). However, no specific vaccine or antiviral therapy has been approved for clinical use. To develop an effective treatment, we isolated a panel of human monoclonal antibodies (mAbs). SF5 and SF83 are two neutralizing mAbs that recognize two viral glycoproteins (Gn and Gc), respectively. We found that their epitopes are closely located, and we then engineered them as several bispecific antibodies (bsAbs). Neutralization and animal experiments indicated that bsAbs display more potent protective effects than the parental mAbs, and the cryoelectron microscopy structure of a bsAb3 Fab-Gn-Gc complex elucidated the mechanism of protection. In vivo virus passage in the presence of antibodies indicated that two bsAbs resulted in less selective pressure and could efficiently bind to all single parental mAb-escape mutants. Furthermore, epitope analysis of the protective mAbs against SFTSV and RVFV indicated that they are all located on the Gn subdomain I, where may be the hot spots in the phleboviruses. Collectively, these data provide potential therapeutic agents and molecular basis for the rational design of vaccines against SFTSV infection.

The Impact of Agroecosystems on Nitrous Acid (HONO) Emissions during Spring and Autumn in the North China Plain.

Solar radiation triggers atmospheric nitrous acid (HONO) photolysis, producing OH radicals, thereby accelerating photochemical reactions, leading to severe secondary pollution formation. Missing daytime sources were detected in the extensive HONO budget studies carried out in the past. In the rural North China Plain, some studies attributed those to soil emissions and more recent studies to dew evaporation. To investigate the contributions of these two processes to HONO temporal variations and unknown production rates in rural areas, HONO and related field observations obtained at the Gucheng Agricultural and Ecological Meteorological Station during spring and autumn were thoroughly analyzed. Morning peaks in HONO frequently occurred simultaneously with those of ammonia (NH3) and water vapor both during spring and autumn, which were mostly caused by dew and guttation water evaporation. In spring, the unknown HONO production rate revealed pronounced afternoon peaks exceeding those in the morning. In autumn, however, the afternoon peak was barely detectable compared to the morning peak. The unknown afternoon HONO production rates were attributed to soil emissions due to their good relationship to soil temperatures, while NH3 soil emissions were not as distinctive as dew emissions. Overall, the relative daytime contribution of dew emissions was higher during autumn, while soil emissions dominated during spring. Nevertheless, dew emission remained the most dominant contributor to morning time HONO emissions in both seasons, thus being responsible for the initiation of daytime OH radical formation and activation of photochemical reactions, while soil emissions further maintained HONO and associated OH radial formation rates at a high level, especially during spring. Future studies need to thoroughly investigate the influencing factors of dew and soil emissions and establish their relationship to HONO emission rates, form reasonable parameterizations for regional and global models, and improve current underestimations in modeled atmospheric oxidation capacity.

Square-planar Tetranuclear Cluster-based Alkaline Earth Metal-organic Frameworks with Enhanced Proton Conductivity.

Alkaline earth (AE) metal complexes have garnered significant interest in various functional fields due to their nontoxicity, low density, and low cost. However, there is a lack of systematic investigation into the structural characteristics and physical properties of AE-metal-organic frameworks (MOFs). In this research, we synthesized isostructural MOFs consisting of AE4(µ4-Cl) clusters bridged by benzo-(1,2;3,4;5,6)-tris(thiophene-2'-carboxylic acid) (BTTC3-) ligands. The resulting structure forms a truncated octahedral cage denoted as [AE4(m4-Cl)]6(BTTC)8, which further linked to a porous three-dimensional framework. Among the investigated AE ions (Ca, Sr, and Ba), the Ca4-MOF demonstrated good chemical stability in water compared to Sr4-MOF and Ba4-MOF. The N2 adsorption and solid-state UV-vis-NIR absorption behaviors were evaluated for all AE4-MOFs, showing similar trends among the different metal ions. Additionally, the proton conduction study revealed that the Ca4-MOF exhibited ultra-high proton conductivity, reaching 3.52×10-2 S cm-1 at 343 K and 98 % RH. Notably, the introduction of LiCl via guest exchange resulted in an improved proton conduction of up to 6.36×10-2 S cm-1 under similar conditions in the modified LiCl@Ca4-MOF. The findings shed light on the regulation of physical properties and proton conductivity of AE-MOFs, providing valuable insights for their potential applications in various fields.

Bimetal-Organic Frameworks Incorporating Both Hard and Soft Base Active Sites for Heavy Metal Ion Capture.

The design and synthesis of stable porous materials capable of removing both hard and soft metal ions pose a significant challenge. In this study, a novel metal-organic framework (MOF) adsorbent named CdK-m-COTTTB was developed. This MOF material was constructed using sulfur-rich m-cyclooctatetrathiophene-tetrabenzoate (m-H4COTTTB) as the organic ligand and oxygen-rich bimetallic clusters as the inorganic nodes. The incorporation of both soft and hard base units within the MOF structure enables effective removal of various heavy metal ions, including both soft and hard acid species. In single-component experiments, the adsorption capacity of CdK-m-COTTTB for Pb2+, Tb3+, and Zr4+ ions reached levels of 636.94, 432.90, and 357.14 mg·g-1, respectively, which is comparable to specific MOF absorbents. The rapid adsorption process was found to be chemisorption. Furthermore, CdK-m-COTTTB exhibited the capability to remove at least 12 different metal ions in both separate and multicomponent solutions. The material demonstrated excellent acid-base stability and renewability, which are advantageous for practical applications. CdK-m-COTTTB represents the first reported pristine MOF material for the removal of both hard and soft acid metal ions. This work serves as inspiration for the design and synthesis of porous crystalline materials that can efficiently remove diverse heavy metal pollutants.

Long-term variations in surface ozone at the Longfengshan Regional Atmosphere Background Station in Northeast China and related influencing factors.

Surface ozone (O3) is a crucial air pollutant that affects air quality, human health, agricultural production, and climate change. Studies on long-term O3 variations and their influencing factors are essential for understanding O3 pollution and its impact. Here, we conducted an analysis of long-term variations in O3 during 2006-2022 at the Longfengshan Regional Atmosphere Background Station (LFS; 44.44°N, 127.36°E, 330.5 m a.s.l.) situated on the northeastern edge of the Northeast China Plains. The maximum daily 8-h average (MDA8) O3 fluctuated substantially, with the annual MDA8 decreasing significantly during 2006-2015 (-0.62 ppb yr-1, p < 0.05), jumping during 2015-2016 and increasing clearly during 2020-2022. Step multiple linear regression models for MDA8 were obtained using meteorological variables, to decompose anthropogenic and meteorological contributions to O3 variations. Anthropogenic activities acted as the primary drivers of the long-term trends of MDA8 O3, contributing 73% of annual MDA8 O3 variability, whereas meteorology played less important roles (27%). Elevated O3 at LFS were primarily associated with airflows originating from the North China Plain, Northeast China Plain, and coastal areas of North China, primarily occurring during the warm months (May-October). Based on satellite products of NO2 and HCHO columns, the O3 photochemical regimes over LFS revealed NOx-limited throughout the period. NO2 increased first, reaching peak in 2011, followed by substantial decrease; while HCHO exhibited significant increase, contributing to decreasing trend in MDA8 O3 during 2006-2015. The plateauing NO2 and decreasing HCHO may contribute to the increase in MDA8 O3 in 2016. Subsequently, both NO2 and HCHO exhibited notable fluctuations, leading to significant changes in O3. The study results fill the gap in the understanding of long-term O3 trends in high-latitude areas in the Northeast China Plain and offer valuable insights for assessing the impact of O3 on crop yields, forest productivity, and climate change.

[Distribution Characteristics, Ecological Risk Assessment, and Source Tracing of Heavy Metals in the Sediments of Typical Lakes in the Middle Reaches of the Yangtze River].

In this study, surface sediment samples were collected from Dongting Lake, Honghu Lake, and Chihu Lake, and the concentrations of 10 heavy metals were measured. Then, the potential risk of heavy metal accumulation was evaluated using the cumulative pollution index (Igeo), the enrichment factor (EF), and the potential ecological risk index (RI), and the sources were traced using correlation analysis (Pearson) and principal component analysis (PCA). The results showed that the pollution and potential ecological risk of Cd were the most serious. The mean values of Cd in East Dongting Lake, Honghu Lake, and Chihu Lake were 2.85, 1.59, and 3.57 mg·kg-1, respectively. The concentrations of Cd were 25.87, 11.36, and 37.58 times higher than the soil background values of the corresponding provinces, which exceeded the risk screening value (0.6 mg·kg-1). Particularly, the Cd concentration of Chihu Lake exceeded the risk control value (3.0 mg·kg-1). Besides Cd, the concentration of As in Honghu Lake was also of concern. At the same time, the Cu, As, Zn, and Pb in Chihu Lake should not be neglected. The potential ecological risks of the three lakes were ranked as follows:Chihu Lake (RI=1 127)>East Dongting Lake (RI=831)>Honghu Lake (RI=421). The primary sources of heavy metals were industrial mining, agricultural production, and aquaculture, and some heavy metals (Mn and Cu) were from natural sources. This study was of great significance for the prevention and control of heavy metals in the sediments of typical lakes in the middle reaches of the Yangtze River.

Topologically Tunable Conjugated Metal-Organic Frameworks for Modulating Conductivity and Chemiresistive Properties for NH3 Sensing.

Electrically conductive metal-organic frameworks (cMOFs) have garnered significant attention in materials science due to their potential applications in modern electrical devices. However, achieving effective modulation of their conductivity has proven to be a major challenge. In this study, we have successfully prepared cMOFs with high conductivity by incorporating electron-donating fused thiophen rings in the frameworks and extending their π-conjugated systems through ring-closing reactions. The conductivity of cMOFs can be precisely modulated ranging from 10-3 to 102 S m-1 by regulating their dimensions and topologies. Furthermore, leveraging the inherent tunable electrical properties based on topology, we successfully demonstrated the potential of these materials as chemiresistive gas sensors with an outstanding response toward 100 ppm NH3 at room temperature. This work not only provides valuable insights into the design of functional cMOFs with different topologies but also enriches the cMOF family with exceptional conductivity properties.

Exploring noncoding variants in genetic diseases: from detection to functional insights.

Previous studies on genetic diseases predominantly focused on protein-coding variations, overlooking the vast noncoding regions in the human genome. The development of high-throughput sequencing technologies and functional genomics tools has enabled the systematic identification of functional noncoding variants. These variants can impact gene expression, regulation, and chromatin conformation, thereby contributing to disease pathogenesis. Understanding the mechanisms that underlie the impact of noncoding variants on genetic diseases is indispensable for the development of precisely targeted therapies and the implementation of personalized medicine strategies. The intricacies of noncoding regions introduce a multitude of challenges and research opportunities. In this review, we introduce a spectrum of noncoding variants involved in genetic diseases, along with research strategies and advanced technologies for their precise identification and in-depth understanding of the complexity of the noncoding genome. We will delve into the research challenges and propose potential solutions for unraveling the genetic basis of rare and complex diseases.

miR-460b-5p promotes proliferation and differentiation of chicken myoblasts and targets RBM19 gene.

The meat production of broilers is crucial to economic benefits of broiler industries, while the slaughter performance of broilers is directly determined by skeletal muscle development. Hence, the broiler breeding for growth traits shows a great importance. As a kind of small noncoding RNA, microRNA (miRNA) can regulate the expression of multiple genes and perform a wide range of regulation in organisms. Currently, more and more studies have confirmed that miRNAs are closely associated with skeletal muscle development of chickens. Based on our previous miR-seq analysis (accession number: PRJNA668199), miR-460b-5p was screened as one of the key miRNAs probably involved in the growth regulation of chickens. However, the regulatory effect of miR-460b-5p on the development of chicken skeletal muscles is still unclear. Therefore, miR-460b-5p was further used for functional validation at the cellular level in this study. The expression pattern of miR-460b-5p was investigated in proliferation and differentiation stages of chicken primary myoblasts. It was showed that the expression level of miR-460b-5p gradually decreased from the proliferation stage (GM 50%) to the lowest at 24 h of differentiation. As differentiation proceeded, miR-460b-5p expression increased significantly, reaching the highest and stabilizing at 72 h and 96 h of differentiation. Through mRNA quantitative analysis of proliferation marker genes, CCK-8 and Edu assays, miR-460b-5p was found to significantly facilitate the transition of myoblasts from G1 to S phase and promote chicken myoblast proliferation. mRNA and protein quantitative analysis of differentiation marker genes, as well as the indirect immunofluorescence results of myotubes, revealed that miR-460b-5p significantly stimulated myotube development and promote chicken myoblast differentiation. In addition, the target relationship was validated for miR-460b-5p according to the dual-luciferase reporter assay and mRNA quantitative analysis, which indicates that miR-460b-5p was able to regulate RBM19 expression by specifically binding to the 3' UTR of RBM19. In summary, miR-460b-5p has positive regulatory effects on the proliferation and differentiation of chicken myoblasts, and RBM19 is a target gene of miR-460b-5p.

High-Performance Single-Crystal Lithium-Rich Layered Oxides Cathode Materials via Na2WO4-Assisted Sintering.

Single-crystal lithium-rich layered oxides (LLOs) with excellent mechanical properties can enhance their crystal structure stability. However, the conventional methods for preparing single-crystal LLOs, require large amounts of molten salt additives, involve complicated washing steps, and increase the difficulty of large-scale production. In this study, a sodium tungstate (Na2WO4)-assisted sintering method is proposed to fabricate high-performance single-crystal LLOs cathode materials without large amounts of additives and additional washing steps. During the sintering process, Na2WO4 promotes particle growth and forms a protective coating on the surface of LLOs particles, effectively suppressing the side reactions at the cathode/electrolyte interface. Additionally, trace amounts of Na and W atoms are doped into the LLOs lattice via gradient doping. Experimental results and theoretical calculations indicate that Na and W doping stabilizes the crystal structure and enhances the Li+ ions diffusion rate. The prepared single-crystal LLOs exhibit outstanding capacity retention of 82.7% (compared to 65.0%, after 200 cycles at 1 C) and a low voltage decay rate of 0.76 mV per cycle (compared to 1.80 mV per cycle). This strategy provides a novel pathway for designing the next-generation high-performance cathode materials for Lithium-ion batteries (LIBs).

Multi-omics joint analysis revealed the metabolic profile of retroperitoneal liposarcoma.

Retroperitoneal liposarcoma (RLPS) is the main subtype of retroperitoneal soft sarcoma (RSTS) and has a poor prognosis and few treatment options, except for surgery. The proteomic and metabolic profiles of RLPS have remained unclear. The aim of our study was to reveal the metabolic profile of RLPS. Here, we performed proteomic analysis (n = 10), metabolomic analysis (n = 51), and lipidomic analysis (n = 50) of retroperitoneal dedifferentiated liposarcoma (RDDLPS) and retroperitoneal well-differentiated liposarcoma (RWDLPS) tissue and paired adjacent adipose tissue obtained during surgery. Data analysis mainly revealed that glycolysis, purine metabolism, pyrimidine metabolism and phospholipid formation were upregulated in both RDDLPS and RWDLPS tissue compared with the adjacent adipose tissue, whereas the tricarboxylic acid (TCA) cycle, lipid absorption and synthesis, fatty acid degradation and biosynthesis, as well as glycine, serine, and threonine metabolism were downregulated. Of particular importance, the glycolytic inhibitor 2-deoxy-D-glucose and pentose phosphate pathway (PPP) inhibitor RRX-001 significantly promoted the antitumor effects of the MDM2 inhibitor RG7112 and CDK4 inhibitor abemaciclib. Our study not only describes the metabolic profiles of RDDLPS and RWDLPS, but also offers potential therapeutic targets and strategies for RLPS.

Endowing the Operability of Supercapacitors at High Temperatures by Regulating the Solvation Structure in Dilute Hybrid Electrolyte with Trimethyl Phosphate Cosolvent.

The redox stabilities of different oxygen donor solvents (C═O, P═O and S═O) and lithium salt anions for supercapacitors (SCs) electrolytes have been compared by calculating the frontier molecular orbital energy. Among six lithium difluoro(oxalate)borate (LiDFOB)-based mono-solvent electrolytes, the dilute LiDFOB-1,4-butyrolactone (GBL) electrolyte exhibits the highest operating voltage but suffers from electrolyte breakdown at elevated temperatures. Trimethyl phosphate (TMP) exhibits the highest redox stability and a strongly negative electrostatic potential (ESP), making it suitable for promoting the dissolution of LiDFOB as expected. Therefore, TMP is selected as a co-solvent into LiDFOB-GBL electrolyte to regulate Li+ solvation structure and improve the operability of electrolytes at high temperatures. The electrochemical stable potential window (ESPW) of 0.5 m LiDFOB-G/T(5/5) hybrid electrolyte can reach 5.230 V. The activated carbon (AC)-based symmetric SC using 0.5 m LiDFOB-G/T(5/5) hybrid electrolyte achieves a high energy density of 54.2 Wh kg-1 at 1.35 kW kg-1 and the capacitance retention reaches 89.2% after 10 000 cycles. The operating voltage of SC can be maintained above 2 V when the temperature rises to 60 °C.

Influence of meteorological factors on open biomass burning at a background site in Northeast China.

Biomass burning (BB) is a very important emission source that significantly adversely impacts regional air quality. BB produces a large number of primary organic aerosol (POA) and black carbon (BC). Besides, BB also provides many precursors for secondary organic aerosol (SOA) generation. In this work, the ratio of levoglucosan (LG) to organic carbon (OC) and the fire hotspots map was used to identify the open biomass burning (OBB) events, which occurred in two representative episodes, October 13 to November 30, 2020, and April 1 to April 30, 2021. The ratio of organic aerosol (OA) to reconstructed PM2.5 concentration (PM2.5*) increased with the increase of LG/OC. When LG/OC ratio is higher than 0.03, the highest OA/PM2.5* ratio can reach 80%, which means the contribution of OBB to OA is crucial. According to the ratio of LG to K+, LG to mannosan (MN) and the regional characteristics of Longfengshan, it can be determined that the crop residuals are the main fuel. The occurrence of OBB coincides with farmers' preferred choices, i.e., burning biomass in "bright weather". The "bright weather" refers to the meteorological conditions with high temperature, low humidity, and without rain. Meteorological factors indirectly affect regional biomass combustion pollution by influencing farmers' active choices.