An Identity-Based Anti-Quantum Privacy-Preserving Blind Authentication in Wireless Sensor Networks.

With the development of wireless sensor networks, IoT devices are crucial for the Smart City; these devices change people's lives such as e-payment and e-voting systems. However, in these two systems, the state-of-art authentication protocols based on traditional number theory cannot defeat a quantum computer attack. In order to protect user privacy and guarantee trustworthy of big data, we propose a new identity-based blind signature scheme based on number theorem research unit lattice, this scheme mainly uses a rejection sampling theorem instead of constructing a trapdoor. Meanwhile, this scheme does not depend on complex public key infrastructure and can resist quantum computer attack. Then we design an e-payment protocol using the proposed scheme. Furthermore, we prove our scheme is secure in the random oracle, and satisfies confidentiality, integrity, and non-repudiation. Finally, we demonstrate that the proposed scheme outperforms the other traditional existing identity-based blind signature schemes in signing speed and verification speed, outperforms the other lattice-based blind signature in signing speed, verification speed, and signing secret key size.

Improving the Power Conversion Efficiency of Carbon Quantum Dot-Sensitized Solar Cells by Growing the Dots on a TiO2 Photoanode In Situ.

Dye-sensitized solar cells (DSSCs) are highly promising since they can potentially solve global energy issues. The development of new photosensitizers is the key to fully realizing perspectives proposed to DSSCs. Being cheap and nontoxic, carbon quantum dots (CQDs) have emerged as attractive candidates for this purpose. However, current methodologies to build up CQD-sensitized solar cells (CQDSCs) result in an imperfect apparatus with extremely low power conversion efficiencies (PCEs). Herein, we present a simple strategy of growing carbon quantum dots (CQDs) onto TiO2 surfaces in situ. The CQDs/TiO2 hybridized photoanode was then used to construct solar cell with an improved PCE of 0.87%, which is higher than all of the reported CQDSCs adopting the simple post-adsorption method. This result indicates that an in situ growing strategy has great advantages in terms of optimizing the performance of CQDSCs. In addition, we have also found that the mechanisms dominating the performance of CQDSCs are different from those behind the solar cells using inorganic semiconductor quantum dots (ISQDs) as the photosensitizers, which re-confirms the conclusion that the characteristics of CQDs differ from those of ISQDs.

Enhanced photovoltaic performance of dye-sensitized solar cells based on NaYF4:Yb(3+), Er(3+)-incorporated nanocrystalline TiO2 electrodes.

Near infrared to visible up-conversion of light by rare earth ion-doped phosphors (NaYF4:Yb(3+), Er(3+)) that convert multiple photons of lower energy to higher energy photons offer new possibilities for improved performance of photovoltaic devices. Here, up-conversion phosphor NaYF4:Yb(3+), Er(3+) doped nanocrystalline TiO2 films are designed and used as a electrode for dye-sensitized solar cells, and the photovoltaic performance of DSSCs based on composite electrodes are investigated. The results show the cell with NaYF4:Yb(3+), Er(3+) achieves a power conversion efficiency of 7.65% under one sun illumination (AM 1.5G, 100mWcm(-2)), which is an increase of 14% compared to the cell without NaYF4:Yb(3+), Er(3+) (6.71%). The performance improvement is attributed to the dual effects of enhanced light harvesting from extended light absorption range and increased light scattering, and lower electron transfer resistance.

Carbon nanotube counter electrode for high-efficient fibrous dye-sensitized solar cells.

High-efficient fibrous dye-sensitized solar cell with carbon nanotube (CNT) thin films as counter electrodes has been reported. The CNT films were fabricated by coating CNT paste or spraying CNT suspension solution on Ti wires. A fluorine tin oxide-coated CNT underlayer was used to improve the adherence of the CNT layer on Ti substrate for sprayed samples. The charge transfer catalytic behavior of fibrous CNT/Ti counter electrodes to the iodide/triiodide redox pair was carefully studied by electrochemical impedance and current-voltage measurement. The catalytic activity can be enhanced by increasing the amount of CNT loading on substrate. Both the efficiencies of fibrous dye-sensitized solar cells using paste coated and sprayed CNT films as counter electrodes are comparative to that using Pt wires, indicating the feasibility of CNT/Ti wires as fibrous counter electrode for superseding Pt wires.

Toward highly efficient CdS/CdSe quantum dots-sensitized solar cells incorporating ordered photoanodes on transparent conductive substrates.

A series of ordered photoanodic architectures (including ordered TiO(2) nanotube arrays (TNT), ZnO nanorods, ZnO/TiO(2) core/shell nanostructures) for CdS/CdSe sensitized solar cells (QDSCs), were fabricated directly on transparent conductive oxide glasses by a facile sol-gel assisted template process. The morphologies, optical and electrical properties of TNTs and CdS/CdSe co-sensitized TNTs have been demonstrated. The effect of CdSe deposition time on the cell performance was clarified, and the growth mechanism of the CdSe quantum dots on the surface of the TNTs has been proposed as well. Furthermore, the evolution of open-circuit photovoltage (V(oc)) towards CdSe deposition time has been investigated by electrochemical impedance spectroscopy (EIS). A promising light-to-electricity conversion efficiency of up to 4.61% has been achieved with 3 µm long TNT arrays, which is the best record for sandwich-type ordered TNT-based QDSCs.

Effects of resveratrol on the amelioration of insulin resistance in KKAy mice.

Resveratrol (Res) has attracted great interest regarding its effects related to metabolic syndrome, especially for lipid metabolic disorder or insulin resistance; however, the underlying mechanisms remain elusive. To explore the effects of Res on insulin sensitivity and the underlying mechanism, insulin-resistant KKA(y) mice were treated with 2 and 4 g/kg diets of Res for 12 weeks. After the treatment, blood glucose, serum insulin, glucose tolerance, and insulin tolerance, as well as other indices such as adiponectin mRNA in epididymal adipose tissues, silent information regulator 1 (Sirt1), AMP-activated protein kinase (AMPK), insulin receptor substrate 1 (IRS1), and phosphorylated protein kinase B (PKB/AKT) proteins in liver and soleus muscles, were investigated. The results indicate that Res intervention reduces blood glucose and serum insulin levels, improves insulin and glucose tolerance, increases serum adiponectin and adiponectin mRNA levels in epididymal adipose tissues, and more importantly, elevates Sirt1, p-AMPK, p-IRS1, and p-AKT levels in liver and soleus muscles. In conclusion, Res could improve insulin sensitivity and ameliorate insulin resistance in KKA(y) mice, which may be associated with the upregulation of Sirt1 protein in liver and soleus muscles and consequent AMPK activation, as well as insulin-signaling related proteins.

Front-side illuminated CdS/CdSe quantum dots co-sensitized solar cells based on TiO2 nanotube arrays.

We fabricated a front-side illuminated CdS/CdSe quantum dots co-sensitized solar cell based on TiO(2) nanotube arrays. The freestanding TiO(2) nanotube arrays were first detached from anodic oxidized Ti foils and then transferred to the fluorine-doped tin oxide to form photoanodes. An opaque Cu(2)S with high electrochemical activity was used as the counter electrode. A photovoltaic conversion efficiency as high as 3.01% under one sun illumination has been achieved after optimizing the deposition time of CdSe quantum dots and the length of the TiO(2) nanotube arrays. It is observed that the power conversion efficiency of quantum dots sensitized solar cells from the front-side illumination mode (3.01%) is much higher than that of the back-side illumination mode (1.32%) owing to the poor catalytic activity of Pt to polysulfide electrolytes and light absorption by the electrolytes for the latter.

Highly efficient fibrous dye-sensitized solar cells based on TiO2 nanotube arrays.

The structure of fibrous dye-sensitized solar cells, which were constructed by a TiO(2) nanotube array on Ti wire as the photoanode twisted by a Pt wire counter electrode, has been first systematically investigated by accurately controlling the thread pitch distance of screwed Pt wire. It has been revealed that the thread pitch will strongly influence the photovoltaic performance and kinetic processes in fibrous solar cells. The effect of the length of the TiO(2) nanotube on cell performance has also been discussed. After optimization, a relatively universal optimized thread pitch value of 1 mm for fibrous DSCs has been proved and the light-to-electricity conversion efficiency has been remarkably improved to 5.84%.

Melamine induces sperm DNA damage and abnormality, but not genetic toxicity.

Melamine is a category III carcinogen. However, its illegal addition to milk and other protein products has led to the pet melamine poisoning in USA and infant renal calculus cases in China. Its long-term toxicity is not clear and needs to be investigated urgently to appease the public panic. In this study, the effects of melamine on mutagenesis in prokaryotes and eukaryotes were tested by Ames test, in vitro mammalian chromosome aberration test, mouse micronucleus test and sperm abnormality test; the effects of melamine on DNA damage in sperm cells were observed by single cell gel electrophoresis, and the effects on malignant transformation were examined by malignant transformation experiment of normal human liver cell line L02. The results show that melamine has no mutagenic function in prokaryotes and eukaryotes in vitro and in vivo, and does not induce malignant cell transformation after long-term exposure. However, it has ability to increase sperm abnormality rate and DNA damage.

Highly efficient CdS/CdSe-sensitized solar cells controlled by the structural properties of compact porous TiO2 photoelectrodes.

At present, the photovoltaic performance of quantum dot-sensitized solar cells (QDSCs) is still much lower than conventional DSCs. Appropriate porous TiO(2) photoanodes for QDSCs need to be further investigated, and optimization of the nanoparticle-based photoanodes is highly desirable as well. In this article, the influence of the structural properties of various TiO(2) photoanodes on CdS/CdSe-sensitized solar cells have been systematically studied. Quantitative analyses of light-harvesting efficiency (LHE) and electron-transfer yield (Φ(ET)) for the QDSCs are investigated for the first time. It is revealed that the LHE increases in the long wavelength region with the addition of large size TiO(2) particles to the transparent film. In the meantime, the balance between the light scattering and surface area also needs to be controlled, which can significantly restrain the dark current of the device. A double-layer photoanodic structure can give 4.92% of light-to-electricity conversion efficiency with a photoactive area of 0.15 cm(2).

A flexible photoelectrode for CdS/CdSe quantum dot-sensitized solar cells (QDSSCs).

We, for the first time, prepared a flexible photoelectrode for CdS/CdSe quantum dot-sensitized solar cells (QDSSCs). A power conversion efficiency of 3.47% was achieved under AM 1.5G illumination for a sandwich type QDSSC consisting of this flexible photoelectrode, Cu(2)S counter electrode and polysulfide electrolyte between the electrodes.

Fibrous CdS/CdSe quantum dot co-sensitized solar cells based on ordered TiO2 nanotube arrays.

A new kind of fibrous quantum dot sensitized solar cell has been designed and fabricated by using CdS and CdSe co-sensitized TiO(2) nanotubes on Ti wire as the photoanode and highly active Cu(2)S as the counter electrode. By optimizing the CdSe deposition time and the length of the nanotube, a power conversion efficiency of 3.18% has been obtained under AM 1.5 illumination (100 mW cm(-2)). The potential application of this kind of solar cell has also been discussed in this paper.

Low-cost flexible nano-sulfide/carbon composite counter electrode for quantum-dot-sensitized solar cell.

Cu2S nanocrystal particles were in situ deposited on graphite paper to prepare nano-sulfide/carbon composite counter electrode for CdS/CdSe quantum-dot-sensitized solar cell (QDSC). By optimization of deposition time, photovoltaic conversion efficiency up to 3.08% was obtained. In the meantime, this composite counter electrode was superior to the commonly used Pt, Au and carbon counter electrodes. Electrochemical impedance spectra further confirmed that low charge transfer resistance at counter electrode/electrolyte interface was responsible for this, implied the potential application of this composite counter electrode in high-efficiency QDSC.

Indole-3-carbinol inhibits nasopharyngeal carcinoma.

This study explored the effects of indole-3-carbinol on the proliferation of human nasopharyngeal carcinoma, both in vitro and in vivo, and the underlying mechanisms in inducing apoptosis of CNE1 cells. Proliferation, apoptosis, malondialdehyde, superoxide dismutase, glutathione peroxidase, expressions of caspase-9, and caspase-3 in human nasopharyngeal carcinoma cells CNE1 were examined. Indole-3-carbinol suppressed proliferation, induced apoptosis, decreased malondialdehyde level, increased the activity of superoxide dismutase and glutathione peroxidase, and up-regulated the expression of active fragments of caspase-9 and caspase-3 both in vitro and in vivo. It was concluded that indole-3-carbinol could inhibit proliferation and induce apoptosis of CNE1 cells and inhibit tumor growth in mice. Increased activity of superoxide dismutase and glutathione peroxidase and activated expression of caspase-9 and caspase-3 were also observed in indole-3-carbinol-treated tumors or tumor cells, suggesting that stress- and apoptosis-related molecules are involved in the indole-3-carbinol-induced apoptosis and inhibition of tumor growth.

[Identification and characterization of the Francisella sp. strain 08HL01032 isolated in air condition systems].

OBJECTIVE: To identify and characterize the strain 08H101032 was isolated from air condition systems in the routine investigations of Legionella in Guangzhou, China, in 2008. METHODS: We adopted several phenotypic and genotypical methods, such as the growth status on various media, morphological, physical and biochemical characteristics, animal test, antibiotic susceptivities, PCR identification, sequence analysis of 16S RNA and RNA polymerase beta-subunit (ropB) gene etc, to determinate the phylogenetic position and outline the basic biological characteristics. RESULTS: Strain 08H101032 was Gram-negative with polymorphic short rods or coccobacillus; with no flagella; devoid of spores; well growth on buffered charcoal yeast extraction (BCYE) agar and BCYE supplemented with glycine (3 g/L), polymyxin B sulfate (80000 iu/L), vancomycin (1 mg/L) and cycloheximide (80 mg/L) (GVPC medium) within 2 days, but delayed growth on ordinary sheep blood agar untill 5 - 7 days; catalase positive; oxidase negative; no reduction of nitrate; no hydrolysis of urea; delayed fermention of glucose to produce acid; which was primarily considered as Legionella. It was lastly identified to the genus Fransicella, characterized by a variety of biochemical and molecular phylogenetic tests, which shared the highest similarities to F. Philomiragia with 95.3% to 16S rRNA gene of 1377 oligo nucleotides and 87.3% to ropB gene of 367 oligo nucleotides (GenBank accession number: FJ591095, FJ939309). Growth were observed after a treatment for 10 minutes with the KCl-HCl buffer of pH 2.2, 20 degrees C, and at 25 degrees C, 37 degrees C (optimum 25 degrees C - 28 degrees C), but not at 42 degrees C. The cells had capsule-like construction by transmission electron microscopy, however no virulence found to mice. CONCLUSIONS: Strain 08H101032 was a potential new species of the genus Fransicella with a typical characteristic of L-cysteine growth stimulating activity, distinguishingly to Legionella with L-cysteine growth dependent activity.

Application of a new cyclic guanidinium ionic liquid on dye-sensitized solar cells (DSCs).

A new cyclic guanidinium ionic liquid OGI (1,3-dimethyl-2-N''-methyl-N''-octylimidazoguanidinium iodide) has been used as a quasi-solid-state electrolyte for dye-sensitized solar cells (DSCs), and 6.38% conversion efficiency was achieved at AM 1.5 simulated sunlight (9.81 mW cm(-2)). Further gelation with SiO2 nanoparticles afforded the solid-state electrolyte, which presented overall conversion efficiency of 5.85%. The diffusion properties of these OGI-based electrolytes were investigated. In the meantime, the optimal structure and ion-pairing interaction in OGI have been proposed by density functional theoretical calculation (DFT) at the B3LYP/6-21G(d,p) level. In view of the experimental and theoretical calculation results, it is suggested that high asymmetry and good charge delocalization of the cyclic guanidinium cation can well restrain the recombination reaction between the injected electrons in the TiO2 conduction band and I3- ions through its flexible hydrocarbon group, thus giving relatively high efficiency.

[Effects of indole-3-carbinol on the outcome of tumor and the changes of anti-oxidative system in null mice grafted with nasopharyngeal carcinoma].

OBJECTIVE: To observe the effects of indole-3-carbinol (I3C) on the outcome of the tumor as well as the changes of the anti-oxidative system in null mice grafted with nasopharyngeal carcinoma. METHODS: 48 BALB/c null mice were divided by means of random number table into control group (0.5% sodium carboxyl methyl cellulose), low dosage (0.02 g/kg), middle dosage (0.1 g/kg) and high dosage (0.5 g/kg) of I3C. The mice were administered with different solutions by gavage for 10 days before CNE1 cells were inoculated subcutaneously into the back (near the armpit) of the nude mice, then the solutions were continually administered by gavage. The tumor volume was measured and the tumor inhibitory rate was calculated. The level of malondialdehyde (MDA), the activity of superoxide dismutases (SOD), the activity of glutathione peroxidase (GSHPx) and the expression of cleaved caspase-3 were determined on the 31th day of the study. RESULTS: I3C could reduce the tumor volume [the tumor volumes of the control group, the middle dosage group and the high dosage group were (4.13 +/- 0.53) x 10(-6) m(3), (3.14 +/- 0.71) x 10(-6) m(3), (2.72 +/- 0.29) x 10(-6) m(3)], as compared with the control, the shrinkage of tumor volume of the middle dosage group and the high dosage group were significant (the t valued at 0.990 and 1.510, P < 0.01). The tumor inhibitory rates of 3 groups were 3.8%, 20.5% and 34.9%, respectively. The contents of MDA in the tumor tissue tended to decrease [the values of control group, the low dosage group, the middle dosage group and the high dosage group were (31.29 +/- 2.51) x 10(-6) mol/L, (30.12 +/- 2.37) x 10(-6) mol/L, (23.32 +/- 1.93) x 10(-6) mol/L, (16.45 +/- 1.43) x 10(-6) mol/L] (F = 98.752, P < 0.01), and that of the high and the middle dosage group could obviously be reduced (t = 8.970, 14.840, P < 0.01) as compared with the control. The activity of SOD seemed to be elevated according to the increase of I3C dosage [the values were (387.24 +/- 23.16) x 10(3) U/L, (399.37 +/- 34.45) x 10(3) U/L, (431.63 +/- 31.24) x 10(3) U/L, (476.45 +/- 44.67) x 10(3) U/L] (F = 53.444, P < 0.01). When compared with the control, the SOD activity of the middle and the high dosage group be obviously increased (t = 44.390, 89.210, P < 0.01). I3C could also elevate the GSHPx activity [the GSHPx values of the four groups were (226.98 +/- 18.35) x 10(3) U/L, (234.65 +/- 15.59) x 10(3) U/L, (247.72 +/- 22.73) x 10(3) U/L, (300.37 +/- 26.02) x 10(3) U/L] (F = 25.916, P < 0.01). The GSHPx of the high dosage group was enhanced remarkable (t = 73.390, P < 0.01) as compared with the control. The expression of cleaved caspase-3 (relative molecular weight = 19 000 000) seemed to be elevated according to the increase of I3C dosage and the relative expression levels of which were 0.87 +/- 0.01, 0.97 +/- 0.01, 1.02 +/- 0.06 and 1.14 +/- 0.02 (F = 39.864, P < 0.01). When compared with the control, the elevation of this kind of cleaved caspase-3 was considered statistical significant (the t values were 0.100, 0.086 and 0.303, respectively, P < 0.05). When I3C dosage increased, the expression of cleaved caspase-3 (relative molecular weight = 17 000 000) seemed to increased too [the relative expression levels of which were 0.00 +/- 0.00, 0.05 +/- 0.02, 0.11 +/- 0.02, 0.20 +/- 0.02 (F = 56.629, P < 0.01)], and the increase of this kind of cleaved caspase-3 was esteemed significantly as compared with those of the control (the t valued at 0.046, 0.103 and 0.193, respectively, P < 0.05). Linear correlate analysis showed that the correlation coefficients between the shrinkage of tumor volume and the expression of the two kinds of cleaved caspase-3 protein was -0.732 (t = 3.404, P < 0.01) and -0.901 (t = 6.642, P < 0.01). CONCLUSION: I3C could reduce the growth of tumor, the mechanism underlie it could be related to the decrease of the content of MDA as well as the elevated levels of SOD, GSHPx, and perhaps could be related to the apoptosis transduced by cleaved caspase-3.

Adsorption of phenolic compounds from aqueous solutions by aminated hypercrosslinked polymers.

Two novel polymers (NJ-1 and NJ-2) were synthesized by chemically modified a hypercrosslinked polymer NJ-0 with dimethylamine and trimethylamine, respectively. The comparison of the adsorption properties of the three polymers toward phenol, resorcin and phloroglucin was made. The study focused on the static equilibrium adsorption behaviors and the adsorption thermodynamics. Freundlich equation was found to fit the adsorption results well. The effect of amino groups introduced onto the surface of the resin and the structure of phenolic compounds on the adsorption were also studied. The hydrogen-bonding interaction and electrostatic interaction could happen between the amino groups and the adsorbates. The adsorption impetus increased as quantity of hydroxyl groups increased, but the adsorption capacity decreased due to the drop of the matching degree of the aperture of resins and the diameter of adsorbate molecules.