Synergistic Effect of Cobalt/Ferrocene as a Catalyst for the Oxygen Evolution Reaction.

There is a great deal of interest in the development of electrocatalysts for the oxygen evolution reaction (OER) that are stable and have high activity because this anodic half-reaction is the main bottleneck in water splitting and other key technologies. Cobalt and iron oxide and oxyhydroxide electrocatalysts constitute a cheaper alternative to the highly active and commonly used Ir- and Ru-based catalysts. Most of the described electrocatalysts require tedious synthetic and expensive preparation procedures. We report here a facile and straightforward preparation of an electrocatalyst by a combination of commercial compounds, such as cobalt chloride and ferrocene. A highly active and stable OER electrocatalyst is obtained, which shows a low overpotential in the alkaline medium as a consequence of a synergistic effect between both compounds and is inexpensive.

Effect of Protection Polymer Coatings on the Performance of an Amperometric Galactose Biosensor in Human Plasma.

Galactose monitoring in individuals allows the prevention of harsh health conditions related to hereditary metabolic diseases like galactosemia. Current methods of galactose detection need development to obtain cheaper, more reliable, and more specific sensors. Enzyme-containing amperometric sensors based on galactose oxidase activity are a promising approach, which can be enhanced by means of their inclusion in a redox polymer coating. This strategy simultaneously allows the immobilization of the biocatalyst to the electroactive surface and hosts the electron shuttling units. An additional deposition of capping polymers prevents external interferences like ascorbic or uric acid as well as biofouling when measuring in physiological fuels. This work studies the protection effect of poly(2-methacryloyloxyethyl phosphorylcholine-co-glycidyl methacrylate (MPC) and polyvinylimidazole-polysulfostyrene (P(VI-SS)) when incorporated in the biosensor design for the detection of galactose in human plasma.

Electro-enzymatic ATP regeneration coupled to biocatalytic phosphorylation reactions.

Adenosine-5-triphosphate (ATP) is the main energy vector in biological systems, thus its regeneration is an important issue for the application of many enzymes of interest in biocatalysis and synthetic biology. We have developed an electroenzymatic ATP regeneration system consisting in a gold electrode modified with a floating phospholipid bilayer that allows coupling the catalytic activity of two membrane-bound enzymes: NiFeSe hydrogenase from Desulfovibrio vulgaris and F1Fo-ATP synthase from Escherichia coli. Thus, H2 is used as a fuel for producing ATP. This electro-enzymatic assembly is studied as ATP regeneration system of phosphorylation reactions catalysed by kinases, such as hexokinase and NAD+-kinase for respectively producing glucose-6-phosphate and NADP+.

Additively Manufactured 3D Micro-bioelectrodes for Enhanced Bioelectrocatalytic Operation.

The drive toward miniaturization of enzyme-based bioelectronics established a need for three-dimensional (3D) microstructured electrodes, which are difficult to implement using conventional manufacturing processes. Additive manufacturing coupled with electroless metal plating enables the production of 3D conductive microarchitectures with high surface area for potential applications in such devices. However, interfacial delamination between the metal layer and the polymer structure is a major reliability concern, which leads to device performance degradation and eventually device failure. This work demonstrates a method to produce a highly conductive and robust metal layer on a 3D printed polymer microstructure with strong adhesion by introducing an interfacial adhesion layer. Prior to 3D printing, multifunctional acrylate monomers with alkoxysilane (-Si-(OCH3)3) were synthesized via the thiol-Michael addition reaction between pentaerythritol tetraacrylate (PETA) and 3-mercaptopropyltrimethoxysilane (MPTMS) with a 1:1 stoichiometric ratio. Alkoxysilane functionality remains intact during photopolymerization in a projection micro-stereolithography (PµSLA) system and is utilized for the sol-gel reaction with MPTMS during postfunctionalization of the 3D printed microstructure to build an interfacial adhesion layer. This leads to the implementation of abundant thiol functional groups on the surface of the 3D printed microstructure, which can act as a strong binding site for gold during electroless plating to improve interfacial adhesion. The 3D conductive microelectrode prepared by this technique exhibited excellent conductivity of 2.2 × 107 S/m (53% of bulk gold) with strong adhesion between a gold layer and a polymer structure even after harsh sonication and an adhesion tape test. As a proof-of-concept, we examined the 3D gold diamond lattice microelectrode modified with glucose oxidase as a bioanode for a single enzymatic biofuel cell. The lattice-structured enzymatic electrode with high catalytic surface area was able to generate a current density of 2.5 µA/cm2 at 0.35 V, which is an about 10 times increase in current output compared to a cube-shaped microelectrode.

Single-Electron Charging of Thioctic Acid Monolayer-Protected Gold Clusters.

There is great interest in the use of Monolayer-Protected Gold Clusters (AuMPCs) as nanoscale capacitors in aqueous media for nanobiotechnological applications, such as bioelectrocatalysts, biofuel cells, and biosensors. However, AuMPCs exhibiting subattofarad double-layer capacitance at room temperature, and the resolution of single-electron charging, has been mainly obtained in an organic medium with nonfunctional capping ligands. We report here the synthesis of Thioctic Acid Monolayer-Protected Au Clusters (TA-AuMPCs) showing electrochemical single electron quantized capacitance charging in organic and aqueous solutions and when immobilized onto different self-assembled monolayer-modified gold electrodes. The presence of functional carboxylic groups opens a simple strategy for interfacing a nanoparticle assembly to biomolecules for their use as electron donors or acceptors in biological electron transfer reactions.

Photobio-electrocatalytic production of H2 using fluorine-doped tin oxide (FTO) electrodes covered with a NiO-In2S3 p-n junction and NiFeSe hydrogenase.

Clean energy vectors are needed towards a fossil fuel-free society, diminishing both greenhouse effect and pollution. Electrochemical water splitting is a clean route to obtain green hydrogen, the cleanest fuel; although efficient electrocatalysts are required to avoid high overpotentials in this process. The combination of inorganic semiconductors with biocatalysts for photoelectrochemical H2 production is an alternative approach to overcome this challenge. N-type semiconductors can be coupled to a co-catalyst for H2 production in the presence of a sacrificial electron donor in solution, but the replacement of the latter with an electrode is a challenge. In this work we attach a NiFeSe-hydrogenase with high activity for H2 production with the n-type semiconductor indium sulfide, which upon visible irradiation is able to transfer its excited electrons to the enzyme. In order to enhance the transfer of the generated holes towards the electrode for their replenishment, we have explored the inclusion of a p-type material, NiO, to induce a p-n junction for H2 production in a photoelectrochemical biocatalytic system in absence of sacrificial reagents.

Comparing Ligninolytic Capabilities of Bacterial and Fungal Dye-Decolorizing Peroxidases and Class-II Peroxidase-Catalases.

We aim to clarify the ligninolytic capabilities of dye-decolorizing peroxidases (DyPs) from bacteria and fungi, compared to fungal lignin peroxidase (LiP) and versatile peroxidase (VP). With this purpose, DyPs from Amycolatopsis sp., Thermomonospora curvata, and Auricularia auricula-judae, VP from Pleurotus eryngii, and LiP from Phanerochaete chrysosporium were produced, and their kinetic constants and reduction potentials determined. Sharp differences were found in the oxidation of nonphenolic simple (veratryl alcohol, VA) and dimeric (veratrylglycerol-ß- guaiacyl ether, VGE) lignin model compounds, with LiP showing the highest catalytic efficiencies (around 15 and 200 s-1·mM-1 for VGE and VA, respectively), while the efficiency of the A. auricula-judae DyP was 1-3 orders of magnitude lower, and no activity was detected with the bacterial DyPs. VP and LiP also showed the highest reduction potential (1.28-1.33 V) in the rate-limiting step of the catalytic cycle (i.e., compound-II reduction to resting enzyme), estimated by stopped-flow measurements at the equilibrium, while the T. curvata DyP showed the lowest value (1.23 V). We conclude that, when using realistic enzyme doses, only fungal LiP and VP, and in much lower extent fungal DyP, oxidize nonphenolic aromatics and, therefore, have the capability to act on the main moiety of the native lignin macromolecule.

Bioelectrocatalytic Activity of W-Formate Dehydrogenase Covalently Immobilized on Functionalized Gold and Graphite Electrodes.

The decrease of greenhouse gases such as CO2 has become a key challenge for the human kind and the study of the electrocatalytic properties of CO2-reducing enzymes such as formate dehydrogenases is of importance for this goal. In this work, we study the covalent bonding of Desulfovibrio vulgaris Hildenborough FdhAB formate dehydrogenase to chemically modified gold and low-density graphite electrodes, using electrostatic interactions for favoring oriented immobilization of the enzyme. Electrochemical measurements show both bioelectrocatalytic oxidation of formate and reduction of CO2 by direct electron transfer (DET). Atomic force microscopy and quartz crystal microbalance characterization, as well as a comparison of direct and mediated electrocatalysis, suggest that a compact layer of formate dehydrogenase was anchored to the electrode surface with some crosslinked aggregates. Furthermore, the operational stability for CO2 electroreduction to formate by DET is shown with approximately 100% Faradaic yield.

Potentiometric detection of ATP based on the transmembrane proton gradient generated by ATPase reconstituted on a gold electrode.

Adenosine triphosphate (ATP) is a key molecule as energy vector for living organisms, therefore its detection reveals the presence of microbial colonies. Environments where the existence of microbial pathogens suppose a health hazard can benefit from real time monitoring of such molecule. We report a potentiometric biosensor based on ATP-synthase from Escherichia coli reconstituted in a floating phospholipid bilayer over gold electrodes modified with a 4-aminothiophenol self-assembled monolayer. The use of a pH-dependent redox probe on the electrode surface allows a simple, specific and reliable on site determination of ATP concentration from 1 µM to 1 mM. The broad range ATP biosensor can offer an alternative way of measuring in a few minutes the presence of microbial contamination.

Increase of Redox Potential during the Evolution of Enzymes Degrading Recalcitrant Lignin.

To investigate how ligninolytic peroxidases acquired the uniquely high redox potential they show today, their ancestors were resurrected and characterized. Unfortunately, the transient Compounds I (CI) and II (CII) from peroxide activation of the enzyme resting state (RS) are unstable. Therefore, the reduction potentials (E°') of the three redox couples (CI/RS, CI/CII and CII/RS) were estimated (for the first time in a ligninolytic peroxidase) from equilibrium concentrations analyzed by stopped-flow UV/Vis spectroscopy. Interestingly, the E°' of rate-limiting CII reduction to RS increased 70 mV from the common peroxidase ancestor to extant lignin peroxidase (LiP), and the same boost was observed for CI/RS and CI/CII, albeit with higher E°' values. A straightforward correlation was found between the E°' value and the progressive displacement of the proximal histidine Hϵ1 chemical shift in the NMR spectra, due to the higher paramagnetic effect of the heme Fe3+ . More interestingly, the E°' and NMR data also correlated with the evolutionary time, revealing that ancestral peroxidases increased their reduction potential in the evolution to LiP thanks to molecular rearrangements in their heme pocket during the last 400 million years.

Characterization of the [NiFeSe] hydrogenase from Desulfovibrio vulgaris Hildenborough.

The [NiFeSe] hydrogenases are a subgroup of the well-characterized family of [NiFe] hydrogenases, in which a selenocysteine is a ligand to the nickel atom in the binuclear NiFe active site instead of cysteine. These enzymes display very interesting catalytic properties for biological hydrogen production and bioelectrochemical applications: high H2 production activity, bias for H2 evolution, low H2 inhibition, and some degree of O2 tolerance. Here we describe the methodologies employed to study the [NiFeSe] hydrogenase isolated from the sulfate-reducing bacteria D. vulgaris Hildenborough and the creation of a homologous expression system for production of variant forms of the enzyme.

A new mechanistic model for an O2-protected electron-bifurcating hydrogenase, Hnd from Desulfovibrio fructosovorans.

The genome of the sulfate-reducing and anaerobic bacterium Desulfovibrio fructosovorans encodes different hydrogenases. Among them is Hnd, a tetrameric cytoplasmic [FeFe] hydrogenase that has previously been described as an NADP-specific enzyme (Malki et al., 1995). In this study, we purified and characterized a recombinant Strep-tagged form of Hnd and demonstrated that it is an electron-bifurcating enzyme. Flavin-based electron-bifurcation is a mechanism that couples an exergonic redox reaction to an endergonic one allowing energy conservation in anaerobic microorganisms. One of the three ferredoxins of the bacterium, that was named FdxB, was also purified and characterized. It contains a low-potential (Em = -450 mV) [4Fe4S] cluster. We found that Hnd was not able to reduce NADP+, and that it catalyzes the simultaneous reduction of FdxB and NAD+. Moreover, Hnd is the first electron-bifurcating hydrogenase that retains activity when purified aerobically due to formation of an inactive state of its catalytic site protecting against O2 damage (Hinact). Hnd is highly active with the artificial redox partner (methyl viologen) and can perform the electron-bifurcation reaction to oxidize H2 with a specific activity of 10 µmol of NADH/min/mg of enzyme. Surprisingly, the ratio between NADH and reduced FdxB varies over the reaction with a decreasing amount of FdxB reduced per NADH produced, indicating a more complex mechanism than previously described. We proposed a new mechanistic model in which the ferredoxin is recycled at the hydrogenase catalytic subunit.

Catalytic Activity and Proton Translocation of Reconstituted Respiratory Complex I Monitored by Surface-Enhanced Infrared Absorption Spectroscopy.

Respiratory complex I (CpI) is a key player in the way organisms obtain energy, being an energy transducer, which couples nicotinamide adenine dinucleotide (NADH)/quinone oxidoreduction with proton translocation by a mechanism that remains elusive so far. In this work, we monitored the function of CpI in a biomimetic, supported lipid membrane system assembled on a 4-aminothiophenol (4-ATP) self-assembled monolayer by surface-enhanced infrared absorption spectroscopy. 4-ATP serves not only as a linker molecule to a nanostructured gold surface but also as pH sensor, as indicated by concomitant density functional theory calculations. In this way, we were able to monitor NADH/quinone oxidoreduction-induced transmembrane proton translocation via the protonation state of 4-ATP, depending on the net orientation of CpI molecules induced by two complementary approaches. An associated change of the amide I/amide II band intensity ratio indicates conformational modifications upon catalysis which may involve movements of transmembrane helices or other secondary structural elements, as suggested in the literature [ Di Luca , Proc. Natl. Acad. Sci. U.S.A. , 2017 , 114 , E6314 - E6321 ].

Enzymatic Electrosynthesis of Alkanes by Bioelectrocatalytic Decarbonylation of Fatty Aldehydes.

An enzymatic electrosynthesis system was created by combining an aldehyde deformylating oxygenase (ADO) from cyanobacteria that catalyzes the decarbonylation of fatty aldehydes to alkanes and formic acid with an electrochemical interface. This system is able to produce a range of alkanes (octane to propane) from aldehydes and alcohols. The combination of this bioelectrochemical system with a hydrogenase bioanode yields a H2 /heptanal enzymatic fuel cell (EFC) able to simultaneously generate electrical energy with a maximum current density of 25 µA cm-2 at 0.6 V and produce hexane with a faradaic efficiency of 24 %.

Transparent, mediator- and membrane-free enzymatic fuel cell based on nanostructured chemically modified indium tin oxide electrodes.

We detail a mediator- and membrane-free enzymatic glucose/oxygen biofuel cell based on transparent and nanostructured conducting supports. Chemically modified indium tin oxide nanoparticle modified electrodes were used to substantially increase the active surface area without significantly compromising transparency. Two different procedures for surface nanostructuring were employed, viz. spray-coating and drop-coating. The spray-coated biodevice showed superior characteristics as compared to the drop-coated enzymatic fuel cell, as a result of the higher nanostructured surface area as confirmed by electrochemical characterisation, as well as scanning electron and atomic force microscopy. Subsequent chemical modification with silanes, followed by the immobilisation of either cellobiose dehydrogenase from Corynascus thermophiles or bilirubin oxidase from Myrothecium verrucaria, were performed to obtain the bioanodes and biocathodes, respectively. The optimised biodevice exhibited an OCV of 0.67V and power output of up to 1.4µW/cm2 at an operating voltage of 0.35V. This is considered a significant step forward in the field of glucose/oxygen membrane- and mediator-free, transparent enzymatic fuel cells.

The direct role of selenocysteine in [NiFeSe] hydrogenase maturation and catalysis.

Hydrogenases are highly active enzymes for hydrogen production and oxidation. [NiFeSe] hydrogenases, in which selenocysteine is a ligand to the active site Ni, have high catalytic activity and a bias for H2 production. In contrast to [NiFe] hydrogenases, they display reduced H2 inhibition and are rapidly reactivated after contact with oxygen. Here we report an expression system for production of recombinant [NiFeSe] hydrogenase from Desulfovibrio vulgaris Hildenborough and study of a selenocysteine-to-cysteine variant (Sec489Cys) in which, for the first time, a [NiFeSe] hydrogenase was converted to a [NiFe] type. This modification led to severely reduced Ni incorporation, revealing the direct involvement of this residue in the maturation process. The Ni-depleted protein could be partly reconstituted to generate an enzyme showing much lower activity and inactive states characteristic of [NiFe] hydrogenases. The Ni-Sec489Cys variant shows that selenium has a crucial role in protection against oxidative damage and the high catalytic activities of the [NiFeSe] hydrogenases.

Bioelectrochemical Haber-Bosch Process: An Ammonia-Producing H2 /N2 Fuel Cell.

Nitrogenases are the only enzymes known to reduce molecular nitrogen (N2 ) to ammonia (NH3 ). By using methyl viologen (N,N'-dimethyl-4,4'-bipyridinium) to shuttle electrons to nitrogenase, N2 reduction to NH3 can be mediated at an electrode surface. The coupling of this nitrogenase cathode with a bioanode that utilizes the enzyme hydrogenase to oxidize molecular hydrogen (H2 ) results in an enzymatic fuel cell (EFC) that is able to produce NH3 from H2 and N2 while simultaneously producing an electrical current. To demonstrate this, a charge of 60 mC was passed across H2 /N2 EFCs, which resulted in the formation of 286 nmol NH3  mg-1 MoFe protein, corresponding to a Faradaic efficiency of 26.4 %.

H2 -Fueled ATP Synthesis on an Electrode: Mimicking Cellular Respiration.

ATP, the molecule used by living organisms to supply energy to many different metabolic processes, is synthesized mostly by the ATPase synthase using a proton or sodium gradient generated across a lipid membrane. We present evidence that a modified electrode surface integrating a NiFeSe hydrogenase and a F1 F0 -ATPase in a lipid membrane can couple the electrochemical oxidation of H2 to the synthesis of ATP. This electrode-assisted conversion of H2 gas into ATP could serve to generate this biochemical fuel locally when required in biomedical devices or enzymatic synthesis of valuable products.

Laccase-modified gold nanorods for electrocatalytic reduction of oxygen.

cathodes. Nanostructuring was provided by gold nanorods (AuNRs), which were characterized and covalently attached to electrodes made of low-density graphite. The nanostructured electrode was the scaffold for covalent and oriented attachment of ThLc. The bioelectrocatalytic currents measured for oxygen reduction were as high as 0.5 mA/cm(2 and 0.7 mA/cm(2), which were recorded under direct and mediated electron transfer regimes, respectively. )The experimental data were fitted to mathematical models showing that when the O2 is bioelectroreduced at high rotation speed of the electrode the heterogeneous electron transfer step is the rate-liming stage. The electrochemical measurement hints a wider population of non-optimally wired laccases than previously reported for 5­8 nm size Au nanoparticle-modified electrode, which could be due to a larger size of the AuNRs when compared to the laccases as well as their different crystal facets.