RESUMEN
To explore the advantages and disadvantages of 3D Slicer reconstruction and 3D printing localization combined with transcranial neuroendoscope in the surgical treatment of deep cerebral micro cavernous hemangiomas. Method The clinical data of patients with deep cerebral micro cavernous hemangiomas treated by our hospital from June 2022 to February 2023 using 3D Slicer reconstruction and 3D printing localization technology combined with transcranial endoscopic surgery were retrospectively analyzed. A total of 5 cases with complete data were collected, including 2 males and 3 females, aged 9-59 years. All 5 patients had deep supratentorial cavernous hemangiomas with a diameter of less than 1.5 cm, and had clinical symptoms such as headache or epilepsy, and had been diagnosed by CT or MRI. Repeated bleeding from small cavernous hemangiomas in the deep brain can lead to clinical symptoms such as recurrent headache and epilepsy, and is required surgical treatment. However, cavernous hemangiomas often have smaller lesions and are difficult to locate in the deep part. Without neuronavigation, surgery can become extremely difficult. Our team's newly developed 3D Slicer reconstruction and 3D printing localization technology which could provide new options for surgical treatment of small cavernous hemangiomas or other small lesions in the deep brain, but its accuracy and safety still need to be verified by further clinical research.
Asunto(s)
Neuroendoscopía , Impresión Tridimensional , Humanos , Femenino , Masculino , Adulto , Adolescente , Niño , Persona de Mediana Edad , Neuroendoscopía/métodos , Estudios Retrospectivos , Adulto Joven , Hemangioma Cavernoso del Sistema Nervioso Central/cirugía , Hemangioma Cavernoso del Sistema Nervioso Central/diagnóstico por imagen , Imagen por Resonancia Magnética/métodos , Imagenología Tridimensional/métodos , Neoplasias Encefálicas/cirugía , Neoplasias Encefálicas/diagnóstico por imagen , Neoplasias Encefálicas/patología , Hemangioma Cavernoso/cirugía , Hemangioma Cavernoso/diagnóstico por imagen , Hemangioma Cavernoso/patología , Tomografía Computarizada por Rayos XRESUMEN
KEY POINTS: Using 3D modeling, we studied the influence of orbital tumor morphology on post-operative outcomes. Orbital tumor volume did not influence postoperative complication rates. Less spherical tumors may be correlated with a more extensive surgical approach.
RESUMEN
OBJECTIVE: The objective of this study was to evaluate the clinical effect and safety of the postauricular infratemporal fossa approach (ITFA) in resecting jugular foramen lesions. METHODS: All 25 patients undergoing microsurgery via postauricular ITFA from March 2015 to May 2023 in the Department of Neurosurgery, Tangdu Hospital, Air Force Military Medical University were included. The clinical and radiological data were retrospectively analyzed. Regular follow-up was carried out. RESULTS: The mean age of all patients was 50.5±8.9 years, and 14 of them were female and 11 were male. Among the cases, lower cranial nerve schwannoma accounted for 60â¯% (15/25) of all tumors, jugular foramen paraganglioma accounted for 20â¯% (5/25), and the remaining 20â¯% included meningioma, chondrosarcoma, plasmacytoma, and salivary gland tumors. Total tumor resection was performed in 18 cases, subtotal tumor resection in 7 cases and partial resection in 1 case. Seven patients underwent gamma knife radiotherapy after surgery. Transient lower cranial nerve dysfunction occurred in 8 patients, and permanent lower cranial nerve dysfunction occurred in 2 patients after surgery. One patient developed facial paralysis, and one patient presented hearing loss. CONCLUSIONS: The postauricular ITFA achieved a relatively high total tumor resection rate and a lower incidence of neurological functional disorders. It is an alternative and suitable surgical approach for resecting jugular foramen lesions. Maximizing the preservation of neurological function is preferred, especially when radical resection cannot be achieved. Stereotactic radiotherapy could be used for residual tumors.
Asunto(s)
Fosa Infratemporal , Foramina Yugular , Complicaciones Posoperatorias , Neoplasias de la Base del Cráneo , Humanos , Masculino , Femenino , Persona de Mediana Edad , Adulto , Foramina Yugular/cirugía , Neoplasias de la Base del Cráneo/cirugía , Complicaciones Posoperatorias/epidemiología , Complicaciones Posoperatorias/etiología , Fosa Infratemporal/cirugía , Estudios Retrospectivos , Procedimientos Neuroquirúrgicos/métodos , Procedimientos Neuroquirúrgicos/efectos adversos , Neurilemoma/cirugía , Meningioma/cirugía , Resultado del Tratamiento , Neoplasias de los Nervios Craneales/cirugía , Anciano , Microcirugia/métodos , Paraganglioma/cirugía , Paraganglioma/diagnóstico por imagenRESUMEN
Purpose: This study aimed to investigate the relationship between temporomandibular joint (TMJ) effusion and TMJ pain, as well as jaw function limitation in patients via two-dimensional (2D) and three-dimensional (3D) magnetic resonance imaging (MRI) evaluation. Patients and Methods: 121 patients diagnosed with temporomandibular disorder (TMD) were included. TMJ effusion was assessed qualitatively using MRI and quantified with 3D Slicer software, then graded accordingly. In addition, a visual analogue scale (VAS) was employed for pain reporting and an 8-item Jaw Functional Limitations Scale (JFLS-8) was utilized to evaluate jaw function limitation. Statistical analyses were performed appropriately for group comparisons and association determination. A probability of p<0.05 was considered statistically significant. Results: 2D qualitative and 3D quantitative strategies were in high agreement for TMJ effusion grades (κ = 0.766). No significant associations were found between joint effusion and TMJ pain, nor with disc displacement and JLFS-8 scores. Moreover, the binary logistic regression analysis showed significant association between sex and the presence of TMJ effusion, exhibiting an Odds Ratio of 5.168 for females (p = 0.008). Conclusion: 2D qualitative evaluation was as effective as 3D quantitative assessment for TMJ effusion diagnosis. No significant associations were found between TMJ effusion and TMJ pain, disc displacement or jaw function limitation. However, it was suggested that female patients suffering from TMD may be at a risk for TMJ effusion. Further prospective research is needed for validation.
RESUMEN
The venous anatomy of the two-toed sloth (Choloepus didactylus) remains poorly understood, particularly in living specimens due to the limitations of traditional cadaveric studies. This study aims to describe the unique venous structures of Choloepus didactylus using computed tomography, enhancing our understanding of this species in a live setting. Three living Choloepus didactylus underwent CT scans as part of routine clinical assessments. The images were reconstructed using 3D Slicer software (version 5.6.2), focusing on the caudal vena cava anatomy. The reconstructions confirmed the presence of a significant intravertebral vein, showing complex venous connections through the ventral sacral foramen and vertebral foramina. These findings highlight notable anatomical variations and challenge existing literature on the species' venous architecture. By employing modern imaging technologies, this research provides new insights into the venous anatomy of Choloepus didactylus, demonstrating the value of non-invasive techniques in studying the anatomical features of live animals, thereby offering a foundation for further comparative and evolutionary studies.
RESUMEN
BACKGROUND: 3D-Slicer is an open-source medical image processing and visualization software. In the surgical treatment of trigeminal neuralgia, it is commonly used to predict the responsible vessels. However, there are few reports on the use of 3D-Slicer software to quantitatively measure the bilateral trigeminal nerve volume in patients with primary trigeminal neuralgia (PTN) based on the three-dimensional images. Therefore, this study aims to explore the role of three-dimensional fused images processed by 3D-Slicer in the evaluation of trigeminal nerve atrophy, providing an objective basis for the diagnosis of PTN. METHODS: 57 PTN patients who underwent microvascular decompression (MVD) or percutaneous balloon compression (PBC) surgery in Hebei general hospital between January 2020 and April 2023 were included. Additionally, 30 patients with facial spasms(HFS) were included as a control group. All patients underwent 3D-TOF-MRA and 3D-FIESTA sequence examinations. Comparisons of bilateral trigeminal nerve volumes within and between groups were conducted by performing image fusion using 3D-slicer. RESULTS: The volume of the affected trigeminal nerve in the MVD group (33.96â¯mm³±12.61â¯mm³) and PBC group (23.05â¯mm³±7.71â¯mm³) was smaller than that of the unaffected trigeminal nerve in the MVD group (39.61â¯mm³±12.83â¯mm³) and PBC group (26.14â¯mm³±6.42â¯mm³), as well as the average volume of the trigeminal nerve in the control group (40.27â¯mm³±10.25â¯mm³) (P<0.05). The differences in bilateral trigeminal ganglion volume (∆V) was significant between the MVD group (∆V=23.59â¯%±14.32â¯%) and the control group (∆V=14.64â¯%±10.00â¯%) (P<0.05). There was no statistical difference in the trigeminal nerve volume difference between the MVD group (∆V=23.59â¯%±14.32â¯%) and the PBC group (∆V=26.52â¯%±15.00â¯%) (P>0.05). CONCLUSION: Trigeminal nerve atrophy is correlated with primary trigeminal neuralgia. 3D-slicer software can quantitatively measure trigeminal nerve volume and assist in the diagnosis of primary trigeminal neuralgia based on the difference in bilateral trigeminal nerve volumes. However, trigeminal nerve atrophy is not associated with postoperative pain recurrence in patients.
Asunto(s)
Atrofia , Cirugía para Descompresión Microvascular , Imagen Multimodal , Nervio Trigémino , Neuralgia del Trigémino , Humanos , Neuralgia del Trigémino/cirugía , Neuralgia del Trigémino/diagnóstico por imagen , Femenino , Masculino , Persona de Mediana Edad , Nervio Trigémino/diagnóstico por imagen , Nervio Trigémino/patología , Nervio Trigémino/cirugía , Estudios Retrospectivos , Anciano , Atrofia/patología , Cirugía para Descompresión Microvascular/métodos , Imagen Multimodal/métodos , Adulto , Imagenología Tridimensional/métodosRESUMEN
To explore the techniques, safety, and feasibility of minimally invasive neurosurgery through the supraorbital eyebrow arch keyhole approach by neuroendoscopy. Retrospective analysis of clinical data of patients with various cranial diseases treated by transcranial neuroendoscopic supraorbital eyebrow keyhole approach in our hospital from March 2021 to October 2023. A total of 39 complete cases were collected, including 21 cases of intracranial aneurysms, 9 cases of intracranial space occupying lesions, 5 cases of brain trauma, 3 cases of cerebrospinal fluid rhinorrhea, and 1 case of cerebral hemorrhage. All patients' surgeries were successful. The good prognosis rate of intracranial aneurysms was 17/21 (81%), and the symptom improvement rate of intracranial space occupying lesions was 8/9 (88.9%). Among them, the initial symptoms of one patient with no improvement were not related to space occupying, while the total effective rate of the other three types of patients was 9/9 (100%). The average length of the craniotomy bone window of the supraorbital eyebrow arch keyhole is 3.77 ± 0.31 cm, and the average width is 2.53 ± 0.23 cm. The average postoperative hospital stay was 14.77 ± 6.59 days. The average clearance rate of hematoma by neuroendoscopy is 95.00% ± 1.51%. Our results indicate that endoscopic surgery through the supraorbital eyebrow arch keyhole approach is safe and effective for the treatment of anterior skull base lesions and cerebral hemorrhage. However, this retrospective study is a single center, small sample study, and the good surgical results do not exclude the subjective screening of suitable patients by clinical surgeons, which may have some bias. Although the clinical characteristics such as indications and contraindications of this surgical method still require further prospective and multicenter clinical research validation, our study still provides a new approach and choice for minimally invasive surgical treatment of anterior skull base lesions.
Asunto(s)
Aneurisma Intracraneal , Procedimientos Quirúrgicos Mínimamente Invasivos , Neuroendoscopía , Base del Cráneo , Humanos , Masculino , Femenino , Persona de Mediana Edad , Adulto , Neuroendoscopía/métodos , Procedimientos Quirúrgicos Mínimamente Invasivos/métodos , Estudios Retrospectivos , Anciano , Aneurisma Intracraneal/cirugía , Aneurisma Intracraneal/diagnóstico por imagen , Base del Cráneo/cirugía , Craneotomía/métodos , Resultado del Tratamiento , Adulto Joven , Procedimientos Neuroquirúrgicos/métodos , Hemorragia Cerebral/cirugíaRESUMEN
Introduction Human skeletons and bones are essential for medical and allied sciences students. Nowadays, it is becoming challenging to procure bone legally, resulting in medical students' inadequacy of bone. Plaster-of-Paris or resin bone models sold on the market are less detailed than real bones. Aims and objectives This study aims to create a three-dimensional (3D)-printed human bone model with free, open-source software and fused deposition modelling (FDM) 3D printers, compare its accuracy with the original bones and validate it with a textbook description. Methods Scapula and hip bone models were produced using open-source software 3D Slicer from computed tomography (CT) data from the "New Mexico Decedent Image Database". After automated segmentation, bones were edited manually with tools in a 3D Slicer (https://www.slicer.org/) and Meshmixer software (Autodesk Inc., San Rafael, California, United States) and 3D bone models were printed using polylactic (PLA) filament. Results and discussions 3D digital models of both bones were successfully created with the maximum possible accuracy with an FDM 3D printer. A 3D digital replica of the scapula obtained after segmentation retained most anatomical features except for the glenoid cavity, as the head of the humerus obscured the glenoid cavity. The 3D digital skeleton of the hip bone retained all anatomical features except articulating surfaces, such as the acetabulum and auricular surface ilium, which were obscured by the head of the femur and sacrum. A few morphological features of both bones differed from the original dry bone, and a few finer details were unclear in the iliac fossa and ischium. After manual editing and post-processing, the final physical model obtained has all the features. Conclusions We conclude that it is possible to produce anatomically accurate models with the greatest possible resemblance and accuracy to the original bones using free and open-source data with an FDM 3D printer.
RESUMEN
The diaphragm is the main inspiratory muscle and separates the thorax and the abdomen. In COPD, the evaluation of the diaphragm shape is clinically important, especially in the case of hyperinflation. However, delineating the diaphragm remains a challenge as it cannot be seen entirely on CT scans. Therefore, the lungs, ribs, sternum, and lumbar vertebrae are used as surrogate landmarks to delineate the diaphragm. We herein describe a CT-based method for evaluating the shape of the diaphragm using 3D Slicer-a free software that allows delineation of the diaphragm landmarks-in ten COPD patients. Using the segmentation performed with 3D Slicer, the diaphragm shape was reconstructed with open-source Free Pascal Compiler. From this graduated model, the length of the muscle fibers, the radius of curvature, and the area of the diaphragm-the main determinants of its function-can be measured. Inter- and intra-user variabilities were evaluated with Bland and Altman plots and linear mixed models. Except for the coronal length (p = 0.049), there were not statistically significant inter- or intra-user differences (p values ranging from 0.326 to 0.910) suggesting that this method is reproducible and repeatable. In conclusion, 3D Slicer can be applied to CT scans for determining the shape of the diaphragm in COPD patients.
Asunto(s)
Diafragma , Imagenología Tridimensional , Enfermedad Pulmonar Obstructiva Crónica , Tomografía Computarizada por Rayos X , Humanos , Diafragma/diagnóstico por imagen , Diafragma/anatomía & histología , Tomografía Computarizada por Rayos X/métodos , Imagenología Tridimensional/métodos , Enfermedad Pulmonar Obstructiva Crónica/diagnóstico por imagen , Masculino , Anciano , Femenino , Persona de Mediana Edad , Programas Informáticos , Reproducibilidad de los ResultadosRESUMEN
The multimodal and multidomain registration of medical images have gained increasing recognition in clinical practice as a powerful tool for fusing and leveraging useful information from different imaging techniques and in different medical fields such as cardiology and orthopedics. Image registration could be a challenging process, and it strongly depends on the correct tuning of registration parameters. In this paper, the robustness and accuracy of a landmarks-based approach have been presented for five cardiac multimodal image datasets. The study is based on 3D Slicer software and it is focused on the registration of a computed tomography (CT) and 3D ultrasound time-series of post-operative mitral valve repair. The accuracy of the method, as a function of the number of landmarks used, was performed by analysing root mean square error (RMSE) and fiducial registration error (FRE) metrics. The validation of the number of landmarks resulted in an optimal number of 10 landmarks. The mean RMSE and FRE values were 5.26 ± 3.17 and 2.98 ± 1.68 mm, respectively, showing comparable performances with respect to the literature. The developed registration process was also tested on a CT orthopaedic dataset to assess the possibility of reconstructing the damaged jaw portion for a pre-operative planning setting. Overall, the proposed work shows how 3D Slicer and registration by landmarks can provide a useful environment for multimodal/unimodal registration.
Asunto(s)
Ortopedia , Tomografía Computarizada por Rayos X/métodos , Pulmón , Programas Informáticos , Corazón , Imagenología Tridimensional/métodos , AlgoritmosRESUMEN
This study aimed to explore a novel, non-segmented based on inverted water outline, and rapid 3D rendering method for identifying the responsible blood vessels for hemifacial spasm. First, the software was developed using the free and open-source 3D Slicer to process magnetic resonance images. Outlines of the water region were extracted and rendered in a three-dimensional space. The traditional image re-slicing technique (IMRT) was used for the control group, while non-segmented inverted water outline rendering (NSIWR) was used to observe the relevant blood vessels in the root entry/exit zone (REZ) of patients with hemifacial spasm. The intraoperative exploration results were considered the gold standard for comparing the differences in identifying relevant blood vessels between the two methods. Twenty-five patients were included, and the reconstruction effect evaluation suggested that NSIWR could effectively reconstruct the responsible blood vessels of the cochlea, facial nerve, and REZ. Compared with IMRT, NSIWR effectively improved the diagnosis of the responsible blood vessels in the REZ, clarified their sources and directions, and was consistent with intraoperative results. This study introduced a novel rapid rendering method based on NSIWR, which was successfully applied for hemifacial spasm. The method enhances accuracy in identifying responsible blood vessels in the REZ without needing multi-modal techniques. It has the potential to improve surgical effectiveness and reduce exploration time in treating hemifacial spasm.
RESUMEN
OBJECTIVE: To explore the applicability of bone reamer and trephine for foraminoscopy in percutaneous endoscopic lumbar discectomy (PELD), and to provide a theoretical basis for foraminoplasty options in clinical practice. METHODS: This study was a prospective cohort study. Sixty-three consecutive patients who underwent PELD for lumbar disc herniation between May 2021 and July 2022 were analysed. Foraminoplasty were performed by bone reamer or trephine. The amount of bone removed and the foramen area enlarged during foraminoplasty by both tools were measured by 3D slicer and Digimizer software, and the numbers of fluoroscopic views were recorded. RESULTS: The bone reamer removed less bone in the Superior Articular Process (SAP) than the trephine (t = 17.507, P < 0.001), and the area enlarged by the bone reamer was smaller than that of the trephine (t = 10.042, P = 0.002). The overall numbers of fluoroscopic views were significantly more in the bone reamer group than in the trephine group (t = 19.003, P < 0.001). In the bone reamer group, when the area of preoperative (FPZ) was no less than 54.55 mm2, the mean number of fluoroscopic views significantly decreased (t = 14.443, P = 0.001). CONCLUSION: Bone reamer was safer and trephine was more efficient for foraminoscopy in PELD. An area of preoperative (FPZ) of 54.55 mm2 can be used as a critical value: bone reamer reduced the risk for cases above the value, while trephine improved the efficiency for cases less than the value.
Asunto(s)
Discectomía Percutánea , Desplazamiento del Disco Intervertebral , Humanos , Desplazamiento del Disco Intervertebral/diagnóstico por imagen , Desplazamiento del Disco Intervertebral/cirugía , Resultado del Tratamiento , Estudios Prospectivos , Endoscopía , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , Estudios RetrospectivosRESUMEN
Objective: To investigate the surgical method and efficacy of percutaneous endoscopic transforaminal discectomy (PETD) for the treatment of lumbar disc herniation (LDH) with different migration levels by introducing the strategy of foramenoplasty with the "distal nucleus pulposus as the core". Methods: Clinical data of LDH patients who underwent single-segment PETD surgery were retrospectively analyzed. Three groups were categorized according to the degree of nucleus pulposus migration in the sagittal position: no migration group, mild migration group, and high migration group. Different sites of foramenoplasty were used for LDH with different degrees of migration. All patients were followed up for at least 12 months. The clinical and follow-up data of the three groups were compared. Results: A total of 102 patients were included, of which 46 (45.1%) were in the no migration group, 36 (35.3%) in the mild migration group, and 20 (19.6%) in the high migration group. Encouraging treatment results were obtained in all three groups. Conclusion: PETD is effective in the treatment of LDH with different degrees of migration, and the foramenoplasty concept of "distal nucleus pulposus as the core" can effectively guide the molding site of foramenoplasty and facilitate the accurate placement of the working trocar.
RESUMEN
Artificial Intelligence (AI) has revolutionized medical imaging procedures, specifically with regard to image segmentation, reconstruction, interpretation, and research. 3D Slicer, an open-source medical image analysis platform, has become a valuable tool in medical imaging education due to its integration of various AI applications. Through its open-source architecture, students can gain practical experience with diverse medical images and the latest AI technology, reinforcing their understanding of anatomy and imaging technology while fostering independent learning and clinical reasoning skills. The implementation of this platform improves instruction quality and nurtures skilled professionals who can meet the demands of clinical practice, research institutions, and technology innovation enterprises. AI algorithms' application in medical image processing have facilitated their translation from the lab to practical clinical applications and education.
RESUMEN
Premise: Imaging technologies that capture three-dimensional (3D) variation in floral morphology at micro- and nano-resolutions are increasingly accessible. In herkogamous flowers, such as those of Theobroma cacao, structural barriers between anthers and stigmas represent bottlenecks that restrict pollinator size and access to reproductive organs. To study the unresolved pollination biology of cacao, we present a novel application of micro-computed tomography (micro-CT) using floral dimensions to quantify pollinator functional size limits. Methods: We generated micro-CT data sets from field-collected flowers and museum specimens of potential pollinators. To compare floral variation, we used 3D Slicer to place landmarks on the surface models and performed a geometric morphometric (GMM) analysis using geomorph R. We identified the petal side door (an opening between the petal hoods and filament) as the main bottleneck for pollinator access. We compared its mean dimensions with proposed pollinators to identify viable candidates. Results: We identified three levels of likelihood for putative pollinators based on the number of morphological (body) dimensions that fit through the petal side door. We also found floral reward microstructures whose presence and location were previously unclear. Discussion: Using micro-CT and GMM to study the 3D pollination biology of cacao provides new evidence for predicting unknown pollinators. Incorporating geometry and floral rewards will strengthen plant-pollinator trait matching models for cacao and other species.
RESUMEN
Objectives: To propose an automated fast cochlear segmentation, length, and volume estimation method from clinical 3D multimodal images which has a potential role in the choice of cochlear implant type, surgery planning, and robotic surgeries.Methods: Two datasets from different countries were used. These datasets include 219 clinical 3D images of cochlea from 3 modalities: CT, CBCT, and MR. The datasets include different ages, genders, and types of cochlear implants. We propose an atlas-model-based method for cochlear segmentation and measurement based on high-resolution µCT model and A-value. The method was evaluated using 3D landmarks located by two experts.Results: The average error was 0.61±0.22 mm and the average time required to process an image was 5.21±0.93 seconds (P<0.001). The volume of the cochlea ranged from 73.96 mm3 to 106.97 mm3, the cochlear length ranged from 36.69 to 45.91 mm at the lateral wall and from 29.12 to 39.05 mm at the organ of Corti.Discussion: We propose a method that produces nine different automated measurements of the cochlea: volume of scala tympani, volume of scala vestibuli, central lengths of the two scalae, the scala tympani lateral wall length, and the organ of Corti length in addition to three measurements related to A-value.Conclusion: This automatic cochlear image segmentation and analysis method can help clinician process multimodal cochlear images in approximately 5 seconds using a simple computer. The proposed method is publicly available for free download as an extension for 3D Slicer software.
RESUMEN
OBJECTIVE: The accurate localization of intracranial lesions is critical in neurosurgery. Most surgeons locate the vast majority of neurosurgical sites through skull surface markers, combined with neuroimaging examination and marking lines. This project's primary purpose was to develop an augmented reality (AR) technology or tool that can be used for surgical positioning using the naked eye. METHODS: Brain models were predesigned with intracranial lesions using computerized tomography scan, and Digital Imaging and Communications in Medicine data were segmented and modeled by 3D slicer software. The processed data were imported into a smartphone 3D viewing software application (Persp 3D) and were used by a Remebot surgical robot. The localization of intracranial lesions was performed, and the AR localization error was calculated compared with standard robot localization. RESULTS: After mastering the AR localization registration method, surgeons achieved an average localization error of 1.39 ± 0.82 mm. CONCLUSIONS: The error of AR positioning technology in surgical simulation tests based on brain modeling was millimeter level, which has verified the feasibility of clinical application. More efficient registration remains a need that should be addressed.
Asunto(s)
Realidad Aumentada , Aplicaciones Móviles , Neurocirugia , Cirugía Asistida por Computador , Humanos , Neurocirugia/métodos , Imagenología Tridimensional/métodos , Procedimientos Neuroquirúrgicos/métodos , Cirugía Asistida por Computador/métodosRESUMEN
OBJECTIVE: To explore factors affecting postoperative rebleeding in patients with spontaneous supratentorial intracerebral hemorrhage (SSICH). METHODS: We retrospectively analyzed data from 724 patients with SSICH treated at Renmin Hospital of Wuhan University from December 2018 to October 2021. Finally, 294 people were eligible to be included in this study. Hematoma locations were classified as basal ganglia, thalamus, subcortex, or intraventricular. Surgery was categorized as neuroendoscopic surgery, burr hole (stereotactic drilling and drainage), or open craniotomy. Postoperative rebleeding was recorded. The incidence, risk factors, and prognosis of postoperative rebleeding were evaluated. RESULTS: All procedures were successfully completed. Postoperative rebleeding occurred in 57 patients (19.83%, 57/294). Univariate logistic regression analysis identified these risk factors for rebleeding: admission Glasgow Coma Scale (GCS) score, irregular hematoma morphology by preoperative Computed Tomography (CT), postoperative hypertension, hematoma location, surgical method (P<0.05), and preoperative hematoma volume (P<0.1). Multivariate logistic regression analysis confirmed admission GCS score, irregular hematoma morphology by preoperative CT, postoperative hypertension, hematoma location, and surgical method as significant risk factors (P<0.05). Burr hole surgery and basal ganglia hematomas were associated with increased odds of rebleeding, and the mortality rates in patients with rebleeding versus no rebleeding were 7.02% versus 0.84%. CONCLUSIONS: Neuroendoscopic surgery, craniotomy, and burr hole are all effective for treating SSICH, but burr hole surgery was an important risk factor for rebleeding and an adverse outcome. Admission GCS score, irregular hematoma morphology, blood pressure control, hematoma location, and surgical method are affected the risk of postoperative rebleeding. 3D Slicer-assisted neuroendoscopic surgery may be the most effective treatment for many patients with SSICH.
RESUMEN
Objective: To predict the volume and shape of the balloon before PBC by reconstructing the Meckel's cave (MC) and establishing a volumetric measurement model, supporting preoperative preparation and intraoperative decisions. Methods: The clinical data of 31 patients with good therapeutic effects who underwent PBC are retrospectively collected, including preoperative MRI, the volume of contrast agent injected into the balloon, and intraoperative lateral X-ray images. The MC on the affected side of the 31 patients is reconstructed based on MRI using 3D Slicer, while the volume of the MC is calculated to compare with the volume of contrast agent. The width (W) and length (L) of the model of the MC in lateral view are measured and used to classify the shape of the MC based on W/L. The consistency between the W/L of the model of the MC and the W/L of the intraoperative balloon is evaluated. Results: For volume, the mean value of the models of the MC (V1) in 31 patients is 399.77±155.13 mm³, while the mean value of the contrast agent injected during PBC (V2) is 539.03±111.93 mm³. The formula obtained by linear regression is V2= 392.1 + 0.3676×V1. Based on the value of W/L, the shape of the MC is classified into thin "pear" in 5 patients (16.13%), standard "pear" in 22 patients (70.97%), and square "pear" in 4 patients (12.90%). There is no significant difference in W/L between the models of the MC and the intraoperative balloons in 31 patients (P=0.221). Conclusion: In 31 patients with good efficacy, it is verified that the prediction of the MC before PBC by 3D Slicer is consistent with the actual situation of the intraoperative balloon. This method can provide certain basis for preoperative preparation and intraoperative judgment.
RESUMEN
The purpose of this study is to explore the evolution of brain edema after minimally invasive surgery in deep spontaneous cerebral hemorrhage (DSICH) treatment and to analyze the differences in edema after different surgical methods. The clinical data of 105 patients with DSICH treated at Renmin Hospital of Wuhan University from January 2020 to June 2022 were analyzed retrospectively. Among them, 54 patients were treated with minimally invasive puncture and drainage surgery (MIPDS group), and 51 were treated with neuroendoscopic surgery (NES group). Continuous computed tomography images of patients in the hospital and 3D Slicer software were used to quantitatively calculate the edematous area to explore the changes in perihematomal edema volume in the two groups after the operation. The peak volume of postoperative edema (37.36±10.51 mL) in the MIPDS group was more extensive than that in the NES group, and its net increase in edema volume was 16.86±10.01 mL more than that in the NES group. The relative edema index (0.86±0.26) was lower in the NES group than in the MIPDS group (P < 0.05). The peak of postoperative edema in the MIPDS group was at 6-8 days after the operation, and that in the NES group was most often at 3-5 days after the operation. There are differences in perihematomal edema of DSICH treated by different minimally invasive methods. Compared with the MIPDS group, the NES group showed earlier peak of cerebral edema and lower degree of cerebral edema. The absolute regression volume of edema in the MIDPs group was greater than that in the NEs group, but there was no difference in the regression rate of edema between the two groups.