RESUMEN
Peyer's patches (PPs), which contain an abundance of B and T cells, play a key role in inducing pivotal immune responses in the intestinal tract. PPs are defined as aggregated lymph follicles, which consist of multiple lymph follicles (LFs) that may interact with each other in a synergistic manner. LFs are thought to be spherical in shape; however, the characteristics of their structure are not fully understood. To elucidate changes in the structure of PPs as individuals grow, we generated serial 2D sections from entire PPs harvested from mice at 2, 4, and 10 weeks of age and performed a 3D analysis using a software, Amira. Although the number of LFs in PPs was not changed throughout the experiment, the volume and surface area of LFs increased significantly, indicating that LFs in PPs develop continuously by recruiting immune cells, even after weaning. In response to the dramatic changes in the intestinal environment after weaning, the development of germinal centers (GCs) in LFs was observed at 4 and 10 weeks (but not 2 weeks) of age. In addition, GCs gradually began to form away from the center of LFs and close to the muscle layer where export lymphatic vessels develop. Importantly, each LF was joined to the adjacent LF; this feature was observed even in preweaning nonactivated PPs. These results suggest that PPs may have a unique organization and structure that enhance immune functions, allowing cells in LFs to have free access to adjacent LFs and egress smoothly from PPs to the periphery upon stimulation after weaning.
Asunto(s)
Ganglios Linfáticos Agregados , Destete , Animales , Ganglios Linfáticos Agregados/inmunología , Ratones , Centro Germinal/inmunología , Linfocitos B/inmunología , Uniones IntercelularesRESUMEN
BACKGROUND: Studies report that Lisfranc injury is more common than thought. Several imaging methods for assessing the stability of Lisfranc injury have been described but many are impossible to standardize and not accurate enough. PURPOSE: To present a three-dimensional (3D) method for analyzing the changes in the joint space width of the midfoot joint and the joints of the medial part of the Lisfranc complex in healthy individuals. MATERIAL AND METHODS: Non-weightbearing and weightbearing cone-beam computed tomography (CBCT) images of 11 healthy feet were acquired and analyzed with 3D software. The mean range of joint space width changes of each joint was computed from the changes in individual image pairs. RESULTS: 3D analysis software was used to analyze the medial part of the Lisfranc complex. In this sample of healthy feet, the changes in the joint spaces in the medial part of Lisfranc complex, calculated with 3D analysis software, was less than 0.6â mm. The distance between bones increased or decreased, depending on which part of the joint surface the measurements were taken. CONCLUSION: In this study, we present a 3D analysis method to evaluate midfoot joint space width changes. Our analysis revealed that in healthy feet there are only minimal changes in the joint space width between weightbearing and non-weightbearing indicating minimal movement of the midtarsal joints. The 3D analysis of weightbearing CBCT data provides a promising tool for analyzing the small midfoot joints in a variety of conditions.
RESUMEN
PURPOSE: The correlation between cartilage thickness evaluated by 3D MRI and knee alignment has not been elucidated. The study's purpose was to retrospectively verify whether average cartilage thickness calculated by the automatic MRI 3D analysis system for each subregion was correlated with knee alignment. METHODS: A total of 53 patients underwent medial meniscus repair or high tibial osteotomy for medial knee osteoarthritis. Cartilage thickness was automatically calculated using 3D MRI software. Knee alignment, weight-bearing line ratio (WBLR), joint line convergence angle (JLCA), medial proximal tibial angle (MPTA), and lateral distal femoral angle (LDFA) were calculated on a weight-bearing long-leg radiograph using digital planning software. The association between knee alignment and the average cartilage thickness at 18 subregions in the medial femoral condyle (MFC) and medial tibial plateau (MTP) was evaluated using Spearman's rank correlation coefficient. RESULTS: Cartilage thickness of the MFC had moderately positive correlations with WBLR at four subregions and weak correlations at two subregions. Cartilage thickness of the MTP had moderately positive correlations with WBLR at four subregions. Cartilage thickness of the MFC had moderately negative correlations with JLCA at six subregions. Cartilage thickness of the MTP had moderately negative correlations with JLCA at four subregions and a weak correlation at one subregion. Conversely, cartilage thickness had weak correlations with MPTA or LDFA. CONCLUSIONS: In knees with pathological conditions in the medial compartment, cartilage thicknesses by 3D MRI had positive correlations with WBLR and JLCA at almost all subregions of the MFC and at the anterior-middle and central-external of the MTP. Treatment strategies should be considered in light of these regions. LEVEL OF EVIDENCE: Cross-sectional study (diagnosis); Level of evidence, 2.
RESUMEN
INTRODUCTION: Foot and ankle alignment plays a pivotal role in human gait and posture. Traditional assessment methods, relying on 2D standing radiographs, present limitations in capturing the dynamic 3D nature of foot alignment during weight-bearing and are prone to observer error. This study aims to integrate weight-bearing CT (WBCT) imaging and advanced deep learning (DL) techniques to automate and enhance quantification of the 3D foot and ankle alignment. METHODS: Thirty-two patients who underwent a WBCT of the foot and ankle were retrospectively included. After training and validation of a 3D nnU-Net model on 45 cases to automate the segmentation into bony models, 35 clinically relevant 3D measurements were automatically computed using a custom-made tool. Automated measurements were assessed for accuracy against manual measurements, while the latter were analyzed for inter-observer reliability. RESULTS: DL-segmentation results showed a mean dice coefficient of 0.95 and mean Hausdorff distance of 1.41â¯mm. A good to excellent reliability and mean prediction error of under 2 degrees was found for all angles except the talonavicular coverage angle and distal metatarsal articular angle. CONCLUSION: In summary, this study introduces a fully automated framework for quantifying foot and ankle alignment, showcasing reliability comparable to current clinical practice measurements. This operator-friendly and time-efficient tool holds promise for implementation in clinical settings, benefiting both radiologists and surgeons. Future studies are encouraged to assess the tool's impact on streamlining image assessment workflows in a clinical environment.
RESUMEN
Natural extracts, such as those from the residues of the Olea europaea industry, offer an opportunity for use due to their richness in antioxidant compounds. These compounds can be incorporated into porous polymeric devices with huge potential for tissue engineering such as bone, cardiovascular, osteogenesis, or neural applications using supercritical CO2. For this purpose, polymeric scaffolds of biodegradable poly(lactic-co-glycolic acid) (PLGA) and chitosan, generated in situ by foaming, were employed for the supercritical impregnation of ethanolic olive leaf extract (OLE). The influence of the presence of chitosan on porosity and interconnectivity in the scaffolds, both with and without impregnated extract, was studied. The scaffolds have been characterized by X-ray computed microtomography, scanning electron microscope, measurements of impregnated load, and antioxidant capacity. The expansion factor decreased as the chitosan content rose, which also occurred when OLE was used. Pore diameters varied, reducing from 0.19 mm in pure PLGA to 0.11 mm in the two experiments with the highest chitosan levels. The connectivity was analyzed, showing that in most instances, adding chitosan doubled the average number of connections, increasing it by a factor of 2.5. An experiment was also conducted to investigate the influence of key factors in the impregnation of the extract, such as pressure (10-30 MPa), temperature (308-328 K), and polymer ratio (1:1-9:1 PLGA/chitosan). Increased pressure facilitated increased OLE loading. The scaffolds were evaluated for antioxidant activity and demonstrated substantial oxidation inhibition (up to 82.5% under optimal conditions) and remarkable potential to combat oxidative stress-induced pathologies.
RESUMEN
In 3D-analysis of the calcaneus, a consistent coordinate system aligned with the original anatomical directions is crucial for pre- and postoperative analysis. This importance stems from the calcaneus's key role in weight-bearing and biomechanical alignment. However, defining a reliable coordinate system based solely on fractured or surgically reconstructed calcanei presents significant challenges. Given its anatomical prominence and consistent orientation, the talus offers a potential solution to this challenge. Our work explores the feasibility of talus-derived coordinate systems for 3D-modeling of the calcaneus across its various conditions. Four methods were tested on nonfractured, fractured and surgically reconstructed calcanei, utilizing Principal Component Analysis, anatomical landmarks, bounding box, and an atlas-based approach. The methods were compared with a self-defined calcaneus reference coordinate system. Additionally, the impact of deviation of the coordinate system on morphological measurements was investigated. Among methods for constructing nonfractured calcanei coordinate systems, the atlas-based method displayed the lowest Root Mean Square value in comparison with the reference coordinate system. For morphological measures like Böhler's Angle and the Critical angle of Gissane, the atlas talus-based system closely aligned with ground truth, yielding differences of 0.6° and 1.2°, respectively, compared to larger deviations seen in other talus-based coordinate systems. In conclusion, all tested methods were feasible for creating a talus derived coordinate system. A talus derived coordinate system showed potential, offering benefits for morphological measurements and clinical scenarios involving fractured and surgically reconstructed calcanei. Further research is recommended to assess the impact of these coordinate systems on surgical planning and outcomes.
RESUMEN
Introduction: The management of aortic dissection has evolved significantly over the decades, with the frozen elephant trunk (FET) procedure emerging as a key technique for treating complex aortic pathologies. Recent practices involve deploying the FET prosthesis more proximally in the aorta (Zone 0) to reduce complications, leading to questions about its impact on long-term aortic remodeling compared to traditional Zone 2 deployment. Methods: This retrospective analysis utilized 3D segmentation software to assess the volumetric changes in aortic remodeling after acute Type A aortic dissections, comparing FET stent graft deployment in Zone 0 and Zone 2. The study included 27 patients operated on between 2020 and 2022, with volumetric measurements taken from postoperative and 6-month follow-up CT scans. Statistical analyses were performed to evaluate the differences in the aortic true lumen (TL) and the perfused false lumen (PFL) between the two groups. Results: Both Zone 0 and Zone 2 deployments resulted in significant true lumen (TL) increases (Z0 p = 0.001, Z2 p < 0.001) and perfused false lumen (PFL) decreases (Z0 p = 0.02, Z2 p = 0.04), with no significant differences in volumetric changes between the groups (p = 0.7 post op and p = 0.9 after 6 months). The distal anastomosis in Zone 0 did not compromise the aortic remodeling outcomes and was associated with reduced distal ischemia and cerebral perfusion times (p = 0.041). The angle measurements in Zone 0 did not show any significant changes after the 6-month control (p = 0.2). However, in Zone 2, a significant change was detected. (p = 0.022). The part comparison analyses did not indicate significant differences in aortic deviation between the groups (p = 0.62), suggesting comparable effectiveness in aortic remodeling. Conclusions: Performing the distal anastomosis more proximally in Zone 0 offers technical advantages without compromising the effectiveness of aortic remodeling compared to the traditional Zone 2 deployment. This finding supports the continued recommendation of Zone 0 deployment in the management of acute Type A aortic dissections, with ongoing studies being needed to confirm the long-term outcomes and survival benefits.
RESUMEN
(1) Background: Various 3D printers are available for dental practice; however, a comprehensive accuracy evaluation method to effectively guide practitioners is lacking. This in vitro study aimed to propose an optimized method to evaluate the spatial trueness of a 3D-printed dental model made of photopolymer resin based on a special structurized dental model, and provide the preliminary evaluation results of six 3D printers. (2) Methods: A structurized dental model comprising several geometrical configurations was designed based on dental crown and arch measurement data reported in previous studies. Ninety-six feature sizes can be directly measured on this original model with minimized manual measurement errors. Six types of photo-curing 3D printers, including Objet30 Pro using the Polyjet technique, Projet 3510 HD Plus using the Multijet technique, Perfactory DDP and DLP 800d using the DLP technique, Form2 and Form3 using the SLA technique, and each printer's respective 3D-printable dental model materials, were used to fabricate one set of physical models each. Regarding the feature sizes of the simulated dental crowns and dental arches, linear measurements were recorded. The scanned digital models were compared with the design data, and 3D form errors (including overall 3D deviation; flatness, parallelism, and perpendicularity errors) were measured. (3) Results: The lowest overall 3D deviation, flatness, parallelism, and perpendicularity errors were noted for the models printed using the Objet30 Pro (overall value: 45 µm), Form3 (0.061 ± 0.019 mm), Objet30 Pro (0.138 ± 0.068°), and Projet 3510 HD Plus (0.095 ± 0.070°), respectively. In color difference maps, different deformation patterns were observed in the printed models. The feature size proved most accurate for the Objet30 Pro fabricated models (occlusal plane error: 0.02 ± 0.36%, occlusogingival direction error: -0.06 ± 0.09%). (4) Conclusions: The authors investigated a novel evaluation approach for the spatial trueness of a 3D-printed dental model made of photopolymer resin based on a structurized dental model. This method can objectively and comprehensively evaluate the spatial trueness of 3D-printed dental models and has a good repeatability and generalizability.
RESUMEN
Climbing is a fast-growing sport, with one of the most common injuries being a rupture of the finger flexor tendon pulley. The strain on pulleys increases as finger joints flex. However, to our knowledge, no study has conducted a kinematic analysis of climbers' fingers. Thus, this study aimed to examine finger kinematics during typical climbing tasks. Eleven elite climbers performed a sequence of four climbing moves, which were recorded by an optical motion capture system. Participants used crimp, half-crimp, and open-hand grips for three trials each, with the fourth condition involving campusing using any grip except crimp. Mean proximal interphalangeal joint (PIP) flexion during the holding phase was 87° (SD 12°), 70° (14°) and 39° (27°) for the crimp, half-crimp and open-hand grip, respectively. Hence, inter-individual PIP flexion ranges overlap between different gripping conditions. Two different movement patterns emerged in the open-hand grip, possibly influenced by the use of the little finger, leading to varying degrees of flexion in the middle and ring fingers. Avoiding little finger usage in the open-hand grip may reduce load during pulley rupture rehabilitation. The implications of PIP joint angle variability on individual pulley injury risk or prevention warrant further investigation. Motion capture proved effective for understanding finger kinematics during climbing and could guide future studies on pulley injury risk factors.
RESUMEN
This work develops a three-dimensional (3D) weak formulation, based on the consistent couple stress theory (CCST), for analyzing the size-dependent dynamic instability behavior of simply-supported, functionally graded (FG) cylindrical microshells that are subjected to combinations of periodic axial compression and external pressure. In our formulation, the microshells are artificially divided into nl layers. The displacement components of each individual layer are selected as the primary variables, which are expanded as a double Fourier series in the in-plane domain and are interpolated with Hermitian C2 polynomials in the thickness direction. Incorporating the layer-wise displacement models into our weak formulation, we develop a Hermitian C2 finite layer method (FLM) for addressing the current issue. The accuracy and the convergence rate of our Hermitian C2 FLM are validated by comparing the solutions it produces with the accurate two-dimensional solutions of critical loads and critical pressures of FG cylindrical macroshells and single-walled carbon nanotubes, which were reported in the literature. The numerical results show the effects of the material length-scale parameter, the inhomogeneity index, the radius-to-thickness and length-to-radius ratios, the load magnitude ratio, and the static and dynamic load factors on the first principal and first secondary instability regions of parametric resonance of simply-supported FG cylindrical microshells are significant.
RESUMEN
OBJECTIVES: Among the existing techniques for the correction of mandibular posterior vertical insufficiency (PVI), the intra-oral ramus vertical lengthening osteotomy (IORVLO) can be proposed as it allows simultaneous correction of mandibular height and retrusion. This study assessed the 3D morpho-anatomical changes of the ramus-condyle unit and occlusal stability after IORVLO. MATERIALS AND METHODS: This retrospective analysis compared immediate and 1-year post-operative 3D CBCT reconstructions. The analysis focused on the condylar height (primary endpoint) and on the changes in condylar (condylar diameter, condylar axis angle) and mandibular (ramus height, Frankfort-mandibular plane angle, gonion position, intergonial distance, angular remodeling) parameters. Additionally, this analysis investigated the maxillary markers and occlusal stability. RESULTS: On the 38 condyles studied in 21 included patients (mean age 23.7 ± 3.9 years), a condylar height (CH) loss of 0.66 mm (p < 0,03) was observed, with no correlation with the degree of ramus lengthening (mean 13.3 ± 0.76 mm). Only one patient presented an occlusal relapse of Class II, but a 3.4 mm (28%) condylar diameter loss and a 33% condylar volume reduction with loss of 1 mm and 3.4 mm in CH and condyle diameter, respectively. A mean 3.56 mm (p < 0.001) decrease in ramus height was noted, mainly due to bone resorption in the mandibular angles. CONCLUSION: This study confirms the overall stability obtained with IORVLO for the correction of PVI. CLINICAL RELEVANCE: This study aims to precise indication of IORVLO, and to validate the clinical and anatomical stability of results.
Asunto(s)
Resorción Ósea , Procedimientos de Cirugía Plástica , Humanos , Adulto Joven , Adulto , Estudios Retrospectivos , Osteotomía , Mandíbula/diagnóstico por imagen , Mandíbula/cirugía , PolímerosRESUMEN
Background: The cochlear aqueduct (CA), which connects the scala tympani and the subarachnoid space, and its accompanying structures appear to have a significant relevance during cochlear implantation and an accurate visualization in clinical imaging is of great interest. Aims and Objective: This study aims to determine which potential and limitations clinically available imaging modalities have in the visualization of the CA. Methods: Micro-CT, flat-panel volume computed tomography with and without secondary reconstruction (fpVCT, fpVCTseco) and multislice computed tomography (MSCT) of 10 temporal bone specimen were used for 3D analysis of the CA. Results: FpVCTseco proved superior in visualizing the associated structures and lateral portions of the CA, which merge into the basal turn of the cochlea. All clinical imaging modalities proved equal in analyzing the length, total volume of the CA and its area of the medial orifice. Conclusion: The choice of the most accurate clinical imaging modality to evaluate the CA and its associated structures depends on the clinical or scientific question. Furthermore, this study should provide a basis for further investigations analyzing the CA.
Asunto(s)
Implantación Coclear , Implantes Cocleares , Acueducto Coclear/diagnóstico por imagen , Acueducto Coclear/cirugía , Cóclea/diagnóstico por imagen , Cóclea/cirugía , Implantación Coclear/métodos , Hueso Temporal/cirugía , Microtomografía por Rayos XRESUMEN
SUMMARY: The nasolabial region is the central esthetic unit of the face and is considered one of the most important determinants of the facial esthetic. The facial morphometry of soft tissues is a very important tool in facial surgery. Advances have been made recently in the capture and analysis of 3D images, which offer great development potential in the diagnosis and treatment of facial deformities. The aim of this study was to characterize the nasolabial region of patient candidates for orthognathic surgery using 3D facial captures. A study was conducted to characterize the width of the nasal base and the nasolabial angle in adult patients through 3D photographs. 30 subjects were included, taking two 3D photos each, one in a resting position and the other smiling. The three-dimensional capture was done with the 3dMDface System. The measurements were taken with the 3dMD Vultus software. The length of the alar base was an average of 34.3 ± 2.6 mm at rest, and 39.1 ± 2.9 mm smiling. The mean of the nasolabial angle was 104.6 ± 9.6° at rest and 105.4 ± 14.3º smiling. Additionally, the distance of the alar base smiling compared to its distance at rest increased an average of 4.83 mm, whereas the nasolabial angle smiling increased an average of 0.8º compared to at rest. In this study, the nasolabial angle did not present any significant changes so that its assessments in the case of facial modifications can be standard; the width of the nasal base is significantly modified with the smile and thus a more intense study of any type of modification in this area is required.
RESUMEN: La región nasolabial es la unidad estética central de la cara y se considera uno de los determinantes más importantes de la estética facial. La morfometría facial en tejidos bandos, es una herramienta de gran importancia en Cirugía Facial. En el último tiempo, se han realizado avances en captura y análisis de imágenes 3D, las cuales ofrecen un gran potencial de desarrollo en el diagnóstico y tratamiento de las deformidades faciales. El objetivo de éste trabajo fue caracterizar mediante capturas faciales 3D la región nasolabial de pacientes candidatos a cirugía ortognática. Se realizó un estudio para caracterizar a través de fotografías tridimensionales de pacientes adultos el ancho de la base nasal y el ángulo nasolabial. Se incluyeron 30 sujetos, tomando 2 fotografías 3D a cada uno, una en posición de reposo y otra en sonrisa. Se realizó la captura tridimensional con la camara facial 3dMDface System. Las mediciones fueron realizadas con el software 3dMD Vultus. La longitud de base alar en reposo, fue en promedio de 34,3 ± 2,6 mm, y de 39,1 ± 2,9 mm, en sonrisa. Por otra parte, la media del ángulo nasolabial en reposo fue de 104,6 ± 9,6° y en sonrisa, de 105,4 ± 14,3º. Por otro lado, la distancia de la base alar en sonrisa respecto a su distancia en reposo, aumentó un promedio de 4,83 mm, mientras que el ángulo nasolabial en sonrisa, aumentó en promedio 0,8º respecto a la posición de reposo. En esta investigación, el ángulo nasolabial no presentó cambios significativos de forma que su valoración frente a modificaciones faciales puede ser estándar; el ancho de base nasal se modifica significativamente con la sonrisa de forma que su estudio debe ser más agudo frente a cualquier tipo de modificación en esta zona.
Asunto(s)
Humanos , Masculino , Femenino , Adolescente , Adulto , Adulto Joven , Fotogrametría/métodos , Nariz/diagnóstico por imagen , Imagenología Tridimensional/métodos , Labio/diagnóstico por imagen , Sonrisa , Procesamiento de Imagen Asistido por Computador , Nariz/anatomía & histología , Labio/anatomía & histologíaRESUMEN
Abstract The sandstones of the Furnas Formation in the State of Paraná, south of Brazil, are located in regions with great importance due to the natural heritage found in the rocky forms and associated flora and fauna. This paper presents a detailed analysis of the internal structure of diverse sandstones of the Furnas Formation. X-ray microtomography allowed 3D characterization of the number, pore size and shape distributions of the sandstones. Images with voxel size of 603 µm3 were utilized to evaluate the sandstone's macroporosity. The main results obtained indicate that higher macroporosities were observed in coarser and some types of silicified sandstones. In general, fine sandstones were characterized by the largest number of pores. As a general conclusion the size and shape distribution of pores seem to have a variable relation with genetic factors as grain size and cement (siliceous and/or ferruginous).