How does orthodontic tooth movement influence the dental pulp? RNA-sequencing on human premolars.

OBJECTIVES: The objective of this study is to analyse the gene expression profile of the dental pulp (DP) of human premolars subjected to 7 and 28 days of orthodontic force (OF) in vivo by using RNA sequencing. The maxillary and mandibular DP were additionally compared. METHODS: Healthy patients requiring orthodontic premolar extractions were randomly assigned to one of the three groups: control (CG) where no OF was applied, 7 and 28 days, where premolars were extracted either 7 or 28 days after the application of a 50-100 g OF. Total RNA was extracted from the DP and analysed via RNA-seq. Differentially expressed genes (DEGs) were identified using a false discovery rate and fold change threshold of <0.05 and ≥1.5, respectively. Functional analysis was performed. RESULTS: After 7 days of OF, pulp reaction indicates immune response, hypoxia, DNA damage and epigenetic regulation. After 28 days, cell adhesion, migration, organization and tissue repair are evident. The maxillary and mandibular pulp tissues react differently to OF. The maxilla exhibits minimal alterations, mostly related to immune response at 7 days and tissue repair at 28 days, whereas the mandible shows mostly DNA damage and epigenetic regulation at 7 days and return to the original state at 28 days. CONCLUSIONS: This study demonstrates that the early reaction of the DP to OF is marked by immune response, hypoxia and DNA damage. In contrast, after 28 days, cell adhesion, migration, organization, tissue repair and dentine formation are observed. Maxillary and mandibular premolars react differently to OF: although the maxilla exhibits minimal alterations at both time points, the mandible mostly shows DNA damage, epigenetic regulation, and immune response at 7 days. These disparities could stem from different blood supplies or the lower maxillary bone density, potentially triggering faster biological changes. Our findings provide insights into the gene regulatory networks modulating DP response to OF.

Implementing microfluidic flow device model in utilizing dural substitutes as pulp capping materials for vital pulp therapy.

Vital pulp therapy (VPT) has gained prominence with the increasing trends towards conservative dental treatment with specific indications for preserving tooth vitality by selectively removing the inflamed tissue instead of the entire dental pulp. Although VPT has shown high success rates in long-term follow-up, adverse effects have been reported due to the calcification of tooth canals by mineral trioxide aggregates, which are commonly used in VPT. Canal calcification poses challenges for accessing instruments during retreatment procedures. To address this issue, this study evaluated the mechanical properties of dural substitute intended to alleviate intra-pulp pressure caused by inflammation, along with assessing the biological responses of human dental pulp stem cells (hDPSC) and human umbilical vein endothelial cells (HUVEC), both of which play crucial roles in dental pulp. The study examined the application of dural substitutes as pulp capping materials, replacing mineral trioxide aggregate (MTA). This assessment was conducted using a microfluidic flow device model that replicated the blood flow environment within the dental pulp. Computational fluid dynamics simulations were employed to ensure that the fluid flow velocity within the microfluidic flow device matched the actual blood flow velocity within the dental pulp. Furthermore, the dural substitutes (Biodesign; BD and Neuro-Patch; NP) exhibited resistance to penetration by 2-hydroxypropyl methacrylate (HEMA) released from the upper restorative materials and bonding agents. Finally, while MTA increased the expression of angiogenesis-related and hard tissue-related genes in HUVEC and hDPSCS, respectively, BD and NP did not alter gene expression and preserved the original characteristics of both cell types. Hence, dural substitutes have emerged as promising alternatives for VPT owing to their resistance to HEMA penetration and the maintenance of stemness. Moreover, the microfluidic flow device model closely replicated the cellular responses observed in live pulp chambers, thereby indicating its potential use as an in vivo testing platform.

Diffusion of Silver Diamine Fluoride Solution in Dentine: An In Vitro Study.

OBJECTIVES: The aim of this research was to assess the diffusion dynamics of silver and fluoride ions after 38% silver diamine fluoride (SDF) solution application on dentine of varying thicknesses over 24 weeks. METHODS: Bovine dentine discs of 5.5 mm in diameter were prepared and separated into 3 groups with thicknesses of 0.5 mm (group 1), 1.0 mm (group 2), and 1.5 mm (group 3). The diameter and number of dentinal tubules of discs were assessed. Each disc received a topical application of 0.05 mL 38% SDF solution. The deionised water in the tube was collected weekly for 24 weeks. The silver and the fluoride ion concentrations in the collected deionised water were determined. Generalised estimating equations was used to explore the potential effects of the key factors on the silver/fluoride diffusion. RESULTS: The amount of silver and fluoride ion diffusion through dentine almost levelled off after 4 weeks and showed a decline trend over 24 weeks. The mean (SD) 24-week cumulative ion diffusion through dentine in groups 1, 2, and 3 was as follows: 20 (4) µg, 10 (2) µg, and 5 (1) µg for silver (P < .05) and 18 (2) µg, 13 (2) µg, and 7 (1) µg for fluoride (P < .05), respectively. CONCLUSIONS: Silver and fluoride ion diffusion through dentine showed a decline trend over 24 weeks. The diameter and the number of dentinal tubules on dentine with different thicknesses affects the ion diffusion dynamics. This study provides indications on the pattern of silver/fluoride ions diffusion through dentine to pulp after 38% SDF application. An increased amount of silver/fluoride diffuses through dentine into the pulp with decreased remaining dentine thickness.

Resolvin D2-induced reparative dentin and pulp stem cells after pulpotomy in a rat model.

Introduction: Vital pulp therapy (VPT) is performed to preserve dental pulp. However, the biocompatibility of the existing materials is of concern. Therefore, novel materials that can induce pulp healing without adverse effects need to be developed. Resolvin D2 (RvD2), one of specialized pro-resolving mediators, can resolve inflammation and promote the healing of periapical lesions. Therefore, RvD2 may be suitable for use in VPT. In the present study, we evaluated the efficacy of RvD2 against VPT using in vivo and in vitro models. Methods: First molars of eight-week-old male Sprague-Dawley rats were used for pulpotomy. They were then divided into three treatment groups: RvD2, phosphate-buffered saline, and calcium hydroxide groups. Treatment results were assessed using radiological, histological, and immunohistochemical (GPR18, TNF-α, Ki67, VEGF, TGF-ß, CD44, CD90, and TRPA1) analyses. Dental pulp-derived cells were treated with RvD2 in vitro and analyzed using cell-proliferation and cell-migration assays, real-time PCR (Gpr18, Tnf-α, Il-1ß, Tgf-ß, Vegf, Nanog, and Trpa1), ELISA (VEGF and TGF-ß), immunocytochemistry (TRPA1), and flow cytometry (dental pulp stem cells: DPSCs). Results: The formation of calcified tissue in the pulp was observed in the RvD2 and calcium hydroxide groups. RvD2 inhibited inflammation in dental pulp cells. RvD2 promoted cell proliferation and migration and the expression of TGF-ß and VEGF in vitro and in vivo. RvD2 increased the number of DPSCs. In addition, RvD2 suppressed TRPA1 expression as a pain receptor. Conclusion: RvD2 induced the formation of reparative dentin, anti-inflammatory effects, and decreased pain, along with the proliferation of DPSCs via the expression of VEGF and TGF-ß, on the pulp surface in pulpotomy models.

Root canal morphology of permanent mandibular anterior teeth in a Pakistani population: A cone beam computed tomography assessment.

Objective: To investigate the incidence of accessory canals and the variation in root canal morphology of permanent mandibular incisors and canines in Pakistani population using Cone Beam Computed Tomography (CBCT). Methods: A cross-sectional study was conducted in University College of Dentistry, The University of Lahore, Pakistan after getting institutional ethical permission from January 2020 to September 2022. The data included records of 111 patients consisting of 444 permanent mandibular incisors and 222 permanent mandibular canines. Accessory root, root canals and Vertucci canal configuration for each tooth was recorded. Data analysis was done using SPSS v20. Descriptive statistics were calculated for each anatomical parameter. Chi-square test was applied to determine association of gender with the presence of accessory roots and root canals. Results: Among the 111 records evaluated, 48.6% were males and 51.4% were females. No accessory root was found in the central and lateral incisors. However, an accessory root was found in 4.9% of the canines. The incidence of accessory canals in the central incisors, lateral incisors and canines was 18.9%, 25.2% and 10.4% respectively. The most common canal configuration in teeth with accessory canals was Type-III, followed by Type-II and Type-V. Conclusion: None of the central or lateral incisor showed accessory root while it was detected in 4.9% canines. The frequency of accessory root canal was found to be 18.9%, 25.2% and 10.4% in central incisors, lateral incisors and canines respectively. The most common canal configuration was Type-I, followed by Type-III and Type-II. Type-V, VI and VII were less common.

Polyetheretherketone split post and core for restoration of multirooted molar with insufficient dental tissue remnants by digital techniques: a case report and 3-year follow up.

BACKGROUND: Multi-rooted teeth with extensive dental defects often face challenges in stability and biomechanical failure. High-performance polymer PEEK materials, with properties closer to dentin, show promise in reducing stress concentration and preserving tooth structure. This report aimed to explore the use of a highly retentive polyetheretherketone (PEEK) for manufacturing custom-made split post and core for the restoration of grossly destroyed endodontically treated molars. CLINICAL CONSIDERATIONS: A 40-year-old female patient presented with complaints of loss of tooth substance in the posterior mandibular tooth. This case involved the digital design and fabrication of PEEK split post and core to restore multirooted molar with insufficient dental tissue remnants. The restorations were evaluated over a 3-year follow-up using the World Federation criteria (FDI). The restoration was clinically evaluated through intraoral examination, radiographic assessment, and subjective patient satisfaction, and was deemed clinically good according to FDI criteria. CONCLUSION: The outstanding mechanical properties of PEEK, coupled with the structure of the split post, provide an effective treatment option for weakened multirooted teeth. Simultaneously, the restoration configuration effectively addressed the challenge of varying postinsertion directions, and the interlocking mechanism between the primary and auxiliary posts enhanced the stability of the post and core.

Isolation and Characterization of Human Dental Pulp Stem Cells Derived from Dental Pulp of Permanent Teeth.

Dental pulp stem cells (DPSCs) are a promising alternative to the source of mesenchymal stem cells (MSCs), as they are readily available in minimally invasive procedures compared to more invasive methods associated with harvesting other MSCs sources. Despite the encouraging pre-clinical outcomes in animal disease models, culture-expanding procedures are needed to obtain a sufficient number of MSCs required for delivery to the damaged site. However, this contributes to increasing regulatory difficulties in translating stem cells and tissue engineering therapy to clinical use. Moreover, discussions continue as to which isolation method is to be preferred when obtaining DPSCs from extracted molars. This protocol describes a simple explant isolation technique of human dental pulp stem cells from the dental pulp of permanent teeth based upon the plastic adherence of MSCs and subsequent outgrowth of cells out of tissue fragments with high efficacy.

Evaluation of Root Canal Morphology of Mandibular Premolars Using Cone-beam Computed Tomography in Golestan Province, North of Iran.

Introduction: Successful endodontic treatment depends on completely clearing, shaping, and filling the prepared canals. Knowledge of the common and aberrant varying pulp anatomies is essential for suitable root canal treatment. Since, this anatomy is complex and varies morphologically in different populations. This study aims to determine the number of roots, canals, and evaluation of mandibular premolars canals using cone-beam computed tomography (CBCT) images in one of Iran's northern provinces (Golestan). Materials and Methods: CBCT axial, coronal, and sagittal slices of two hundred and twelve mandibular premolars were analyzed to determine the number of roots and canals based on Vertucci type. The images were analyzed in a one-millimeter slice in mesiodistal and buccolingual dimensions based on gender. The data were analyzed using the Chi-score test to compare the components if the defaults were not established. A significance level of 0.05 was considered. Result: Of the two hundred twelve teeth evaluated, 130 (61.3%) were first premolars, and 82 (38.6%) were second premolars. Most first premolars (78.5%) and almost all second premolars (97.6%) had one root. Morphological types of root canals were identified based on Vertucci's classification types I, II, III, IV, V, or VIII, and type I was the most frequent. There were no significant associations between number of roots and sex (P>0.05). Conclusion: Mandibular premolars mostly had one root and type I Vertucci morphology. The frequency of two-canal premolars was higher in the male population. Although the abundance of two or three roots with different morphologies was also observed, the possibility of the presence of an additional root canal should be considered.

Pulp, Root Canal and Peri-radicular Conditions: The Need for Re-classification.

Currently no standard, universally accepted, and clinically useful classification of pulp, root canal and peri-radicular conditions is used within the dental profession. Most published classifications are either too simple and miss many of the conditions reported to occur within the pulp, root canal and peri-radicular tissues, or they are too complex for use in clinical settings. Furthermore, many classifications have used inappropriate terminology that has either not been defined or has been poorly defined. The lack of standardisation leads to confusion amongst practitioners and potential uncertainty regarding treatment. It also limits the ability to communicate effectively, to teach appropriately, and to compare data and research findings throughout the world. When developing a classification of tissue conditions or diseases, it is essential that the classification is developed appropriately and meets the recommended criteria for effective clinical, educational and research use. It is also extremely important that correct and well-defined terminology is used since "words do matter". Popular terminology based on symptoms should be avoided as these have been proven to lead to inappropriate treatment decisions. This review discusses how classifications should be developed for pulp, root canal and peri-radicular conditions. It also discusses the deficiencies of some popular classifications and outlines the classifications that truly address the recommended criteria and reflect the physiological and pathological changes in the pulp, root canal and peri-radicular tissues. Hence, it is recommended that these latter classifications be adopted as the internationally-accepted classifications for future clinical use, as well as for educational, research and communication purposes.

Visualization of Pulpal Structures by SWIR in Endodontic Access Preparation.

Endodontic access preparation is one of the initial steps in root canal treatments and can be hindered by the obliteration of pulp canals and formation of tertiary dentin. Until now, methods for direct intraoperative visualization of the 3-dimensional anatomy of teeth have been missing. Here, we evaluate the use of shortwave infrared radiation (SWIR) for navigation during stepwise access preparation. Nine teeth (3 anteriors, 3 premolars, and 3 molars) were explanted en bloc with intact periodontium including alveolar bone and mucosa from the upper or lower jaw of human body donors. Analysis was performed at baseline as well as at preparation depths of 5 mm, 7 mm, and 9 mm, respectively. For reflection, SWIR was used at a wavelength of 1,550 nm from the occlusal direction, whereas for transillumination, SWIR was passed through each sample at the marginal gingiva from the buccal as well as oral side at a wavelength of 1,300 nm. Pulpal structures could be identified as darker areas approximately 2 mm before reaching the pulp chamber using SWIR transillumination, although they were indistinguishable under normal circumstances. Furcation areas in molars appeared with higher intensity than areas with canals. The location of pulpal structures was confirmed by superimposition of segmented micro-computed tomography (µCT) images. By radiomic analysis, significant differences between pulpal and parapulpal areas could be detected in image features. With hierarchical cluster analysis, both segments could be confirmed and associated with specific clusters. The local thickness of µCTs was calculated and correlated with SWIR transillumination images, by which a linear dependency of thickness and intensity could be demonstrated. Lastly, by in silico simulations of light propagation, dentin tubules were shown to be a crucial factor for understanding the visibility of the pulp. In conclusion, SWIR transillumination may allow direct clinical live navigation during endodontic access preparation.

Anti-inflammatory potential of casein enzymatic hydrolysate/gelatin methacryloyl scaffolds for vital pulp therapy.

OBJECTIVES: To synthesize casein enzymatic hydrolysate (CEH)-laden gelatin methacryloyl (GelMA) fibrous scaffolds and evaluate the cytocompatibility and anti-inflammatory effects on dental pulp stem cells (DPSCs). MATERIALS AND METHODS: GelMA fibrous scaffolds with 10%, 20%, and 30% CEH (w/w) and without CEH (control) were obtained via electrospinning. Chemo-morphological, degradation, and mechanical analyses were conducted to evaluate the morphology and composition of the fibers, mass loss, and mechanical properties, respectively. Adhesion/spreading and viability of DPSCs seeded on the scaffolds were also assessed. The anti-inflammatory potential on DPSCs was tested after the chronic challenge of cells with lipopolysaccharides (LPS), followed by treatment with extracts obtained after immersing the scaffolds in α-MEM. The synthesis of the pro-inflammatory cytokines IL-6, IL-1α, and TNF-α was measured by ELISA. Data were analyzed by ANOVA/post-hoc tests (α = 5%). RESULTS: CEH-laden electrospun fibers had a larger diameter than pure GelMA (p ≤ 0.036). GelMA scaffolds laden with 20% and 30% CEH had a greater mass loss. Tensile strength was reduced for the 10% CEH fibers (p = 0.0052), whereas no difference was observed for the 20% and 30% fibers (p ≥ 0.6736) compared to the control. Young's modulus decreased with CEH (p < 0.0001). Elongation at break increased for the 20% and 30% CEH scaffolds (p ≤ 0.0038). Over time, DPSCs viability increased across all groups, indicating cytocompatibility, with CEH-laden scaffolds exhibiting greater cell viability after seven days (p ≤ 0.0166). Also, 10% CEH-GelMA scaffolds decreased the IL-6, IL-1α, and TNF-α synthesis (p ≤ 0.035). CONCLUSION: CEH-laden GelMA scaffolds facilitated both adhesion and proliferation of DPSCs, and 10% CEH provided anti-inflammatory potential after chronic LPS challenge. CLINICAL RELEVANCE: CEH incorporated in GelMA fibrous scaffolds demonstrated the potential to be used as a cytocompatible and anti-inflammatory biomaterial for vital pulp therapy.

Hypoxia-inducible factors in postnatal mouse molar dental pulp development: insights into expression patterns, localisation and metabolic pathways.

Hypoxia is relevant to several physiological and pathological processes and this also applies for the tooth. The adaptive response to lowering oxygen concentration is mediated by hypoxia-inducible factors (HIFs). Since HIFs were shown to participate in the promotion of angiogenesis, stem cell survival, odontoblast differentiation and dentin formation, they may play a beneficial role in the tooth reparative processes. Although some data were generated in vitro, little is known about the in vivo context of HIFs in tooth development. In order to contribute to this field, the mouse mandibular first molar was used as a model.The expression and in situ localisation of HIFs were examined at postnatal (P) days P0, P7, P14, using RT-PCR and immunostaining. The expression pattern of a broad spectrum of hypoxia-related genes was monitored by customised PCR Arrays. Metabolic aspects were evaluated by determination of the lactate level and mRNA expression of the mitochondrial marker Nd1.The results show constant high mRNA expression of Hif1a, increasing expression of Hif2a, and very low expression of Hif3a during early postnatal molar development. In the examined period the localisation of HIFs in the nuclei of odontoblasts and the subodontoblastic layer identified their presence during odontoblastic differentiation. Additionally, the lower lactate level and higher expression of mitochondrial Nd1 in advanced development points to decreasing glycolysis during differentiation. Postnatal nuclear localisation of HIFs indicates a hypoxic state in specific areas of dental pulp as oxygen demands depend on physiological events such as crown and root dentin mineralization.

Anatomical characteristics of different tooth groups. Effect on in-office bleaching treatment

AIM: The objective of the present study was to investigate the association between the anatomical characteristics of different tooth groups and the diffusion and bleaching effect of hydrogen peroxide (H2O2). MATERIALS AND METHODS: Computed tomography (CT) images from five patients were used to assess the hard tissue thickness and pulp volume (PV) of four tooth groups: lower (mandibular) incisors (LI), upper (maxillary) incisors (UI), canines (C), and premolars (PM). Additionally, 80 bovine tooth disks were divided into four groups (n = 20) to match the thickness of each tooth group studied. All the specimens were exposed to a 35% H2O2 bleaching gel, with 50 µL applied for 45 min during the first, second, and third sessions. Diffusion was evaluated using the peroxidase enzyme method. Color change analyses (∆E, ∆E00, and ∆WID) were performed after the three application sessions and 7 days after the bleaching treatment using a spectrophotometer. RESULTS: The PM group showed greater thickness and PV, followed by the C, UI, and LI groups (P 0.001). The LI group had six times greater H2O2 diffusion compared with the PM group (P 0.001), while the PM group exhibited a PV nine times larger than the LI group. Furthermore, the LI and UI groups achieved color saturation with one fewer session than the C and PM groups. CONCLUSIONS: Specific tooth groups have anatomical characteristics that interfere with bleaching treatment in terms of the diffusion and whitening effect of H2O2. Furthermore, the diffusion capacity of H2O2 was inversely proportional to the thickness of the tooth groups.

Notch Signaling Hydrogels Enable Rapid Vascularization and Promote Dental Pulp Tissue Regeneration.

Successful dental pulp regeneration is closely associated with rapid revascularization and angiogenesis, processes driven by the Jagged1(JAG1)/Notch signaling pathway. However, soluble Notch ligands have proven ineffective in activating this pathway. To overcome this limitation, a Notch signaling hydrogel is developed by indirectly immobilizing JAG1, aimed at precisely directing the regeneration of vascularized pulp tissue. This hydrogel displays favorable mechanical properties and biocompatibility. Cultivating dental pulp stem cells (DPSCs) and endothelial cells (ECs) on this hydrogel significantly upregulate Notch target genes and key proangiogenic markers expression. Three-dimensional (3D) culture assays demonstrate Notch signaling hydrogels improve effectiveness by facilitating encapsulated cell differentiation, enhancing their paracrine functions, and promoting capillary lumen formation. Furthermore, it effectively communicates with the Wnt signaling pathway, creating an odontoinductive microenvironment for pulp-dentin complex formation. In vivo studies show that short-term transplantation of the Notch signaling hydrogel accelerates angiogenesis, stabilizes capillary-like structures, and improves cell survival. Long-term transplantation further confirms its capability to promote the formation of pulp-like tissues rich in blood vessels and peripheral nerve-like structures. In conclusion, this study introduces a feasible and effective hydrogel tailored to specifically regulate the JAG1/Notch signaling pathway, showing potential in advancing regenerative strategies for dental pulp tissue.

Photo-crosslinkable hydrogel incorporated with bone matrix particles for advancements in dentin tissue engineering.

The objective of this study was to create injectable photo-crosslinkable biomaterials, using gelatin methacryloyl (GelMA) hydrogel, combined with a decellularized bone matrix (BMdc) and a deproteinized (BMdp) bovine bone matrix. These were intended to serve as bioactive scaffolds for dentin regeneration. The parameters for GelMA hydrogel fabrication were initially selected, followed by the incorporation of BMdc and BMdp at a 1% (w/v) ratio. Nano-hydroxyapatite (nHA) was also included as a control. A physicochemical characterization was conducted, with FTIR analysis indicating that the mineral phase was complexed with GelMA, and BMdc was chemically bonded to the amide groups of gelatin. The porous structure was preserved post-BMdc incorporation, with bone particles incorporated alongside the pores. Conversely, the mineral phase was situated inside the pore opening, affecting the degree of porosity. The mineral phase did not modify the degradability of GelMA, even under conditions of type I collagenase-mediated enzymatic challenge, allowing hydrogel injection and increased mechanical strength. Subsequently, human dental pulp cells (HDPCs) were seeded onto the hydrogels. The cells remained viable and proliferative, irrespective of the GelMA composition. All mineral phases resulted in a significant increase in alkaline phosphatase activity and mineralized matrix deposition. However, GelMA-BMdc exhibited higher cell expression values, significantly surpassing those of all other formulations. In conclusion, our results showed that GelMA-BMdc produced a porous and stable hydrogel, capable of enhancing odontoblastic differentiation and mineral deposition when in contact with HDPCs, thereby showing potential for dentin regeneration.

Advancements and challenges in stem/progenitor cell transplantation for dentin-pulp regeneration: a systematic review of animal studies (part I).

Dentin-pulp regeneration through stem/progenitor cell transplantation represents a promising frontier in regenerative endodontics. This systematic review meticulously evaluates animal studies to investigate the efficacy of stem cell therapy in repairing/regenerating the dentine-pulp complex in mature/immature animal teeth. Employing a comprehensive electronic search of PubMed and Scopus databases up to October 2023, relevant English studies were identified/assessed. Evaluation parameters encompassed radiographic and histological assessments of dentin-pulp complex formation. Outcome measures included pulp-like and dentin-like tissues regeneration, apical healing, dentin thickening, apical closure, and dentinal bridge formation. The risk-of-bias assessment adhered to the Systematic Review Centre for Laboratory Animal Experimentation (SYRCLE) guidelines. Out of 3250 identified articles, 23 animal experiments were included, categorized into regenerative procedures in mature teeth (n=11), regenerative procedures in immature teeth (n=4), and vital pulp therapy (n=8). Despite the promising potential, the bias in the included studies was high. Notably, Various scaffolds, and growth factors were employed, highlighting the heterogeneity across the studies. Dental pulp stem cells (DPSCs) and bone marrow stem cells, especially specific subfractions, demonstrated notable regenerative potential: hypoxic conditions and extracellular vesicles from preconditioned DPSCs enhanced regeneration, with considerations of cell fate. Donor age impacted regeneration, and challenges persisted in pulpotomy and direct pulp capping. Scaffold and growth factor choices influenced outcomes, underscoring the need for standardized strategies. Despite the promise, clinical viability faces hurdles, necessitating further investigation into adverse effects, optimized scaffolds, and regulatory considerations. This systematic review illuminates the potential of stem cell transplantation for dentin-pulp complex regeneration. The overall evidence quality, influenced by study heterogeneity and biases, underscores the need for cautious interpretation of findings. Future studies should refine methodologies and establish reliable histological parameters for meaningful advancements in dentin-pulp regeneration.

Advancing dentin-pulp regeneration: clinical perspectives and insights from stem/progenitor cell transplantation (part II).

This systematic review evaluates clinical studies investigating regenerative endodontic procedures for mature/immature teeth utilizing stem cell transplantation. An electronic search of Scopus, PubMed, ISI Web Science, and Google Scholar was conducted up to January 2023. Outcome measures encompassed radiographic (periapical lesion, root length, apical foramen width, volume of the regenerated pulp) and clinical (post-operative pain, sensibility test) parameters. Among 3250 identified articles, five clinical studies were selected, comprising two randomized controlled trials (RCTs) for mature/immature teeth, and three case reports/series for mature teeth. Despite the promising potential, the included studies exhibited a notable risk of bias. The diversity in stem cells (e.g., dental pulp stem cells [DPSCs], umbilical cord mesenchymal stem cells [UC-MSCs]), scaffolds (Atecollagen, collagen membrane, platelet-poor plasma [PPP], leukocyte platelet-rich in fibrin [L-PRF]), and growth factors (granulocyte colony-stimulating factor [G-CSF]) emphasized the heterogeneity across interventions. In RCTs, DPSCs application increased root length and reduced apical foramen width in immature teeth, while UC-MSCs transplantation reduced apical lesions in mature teeth. Transplantation of DPSCs aggregates or UC-MSCs/PPP also elicited positive pulp responses and increased blood flow. In case reports/series, DPSCs application in teeth with irreversible pulpitis resulted in mineralization and increased the regenerated pulp' volume. Furthermore, transplantation of DPSCs with G-CSF/atelocollagen or L-PRF/collagen membrane led to positive pulp responses. While underscoring the potential of stem cell transplantation for regenerative endodontics in mature/immature teeth, the overall evidence quality and the limited number of available studies emphasize the need for cautious interpretation of results. Future well-designed clinical studies are essential to validate these findings further.

Dental pulp mesenchymal stem cells-response to fibrin hydrogel reveals ITGA2 and MMPs expression.

Regenerative endodontic procedures (REP) aim at reestablishing tooth vitality by replacing the irreversibly damaged dental pulp removed by the dental practitioner with a new functional one. The current treatment of advanced caries relies on the replacement of the inflamed or necrosed dental pulp with an inert filling material. This leads to a functional but non-vital tooth, which lacks the ability to sense dental tissue damage, and to protect from further bacterial attack. Therapeutic strategies inspired by tissue engineering called REP propose to regenerate a fully functional dental pulp directly in the canal space. Promising results were obtained using dental pulp mesenchymal stem cells (DP-MSCs) in combination with bio-inspired artificial and temporary 3D hydrogels made of extracellular matrix molecules such as collagen and fibrin biomacromolecules. However, the uncontrolled mechanisms of DP regeneration from DP-MSCs in 3D biomacromolecules fail to regenerate a fully functional DP and can induce fibrotic scarring or mineralized tissue formation to a non-negligible extent. The lack of knowledge regarding the early molecular mechanisms initiated by DP-MSCs seeded in ECM-made hydrogels is a scientific lock for REP. In this study, we investigated the early DP-MSC-response in a 3D fibrin hydrogel. DP-MSCs isolated from human third molars were cultured for 24 h in the fibrin hydrogel. The differential transcript levels of extracellular and cell surface genes were screened with 84-gene PCR array. Out of the 84 genes screened, 9 were found to be overexpressed, including those coding for the integrin alpha 2 subunit, the collagenase MMP1 and stromelysins MMP3, MMP10 and MMP12. Over-expression of ITGA2 was confirmed by RT-qPCR. The expression of alpha 2 integrin subunit protein was assessed over time by immunoblot and immunofluorescence staining. The increase in the transcript level of MMP1, MMP3, MM10 and MMP12 was confirmed by RT-qPCR. The overexpression of MMP1 and 3 at the protein level was assessed by immunoblot. MMP3 expression by DP-MSCs was observed by immunofluorescence staining. This work demonstrates overexpression of ITGA2 and of MMP1, 3, 10 and 12 by DP-MSCs cultured in a fibrin hydrogel. The main preliminary extracellular and cell surface response of the DP-MSCs to fibrin hydrogel seems to rely on a ITGA2/MMP3 axis. Further investigations are needed to precisely decipher the role of this axis in dental pulp tissue building. Nevertheless, this work identifies extracellular and cell surface molecules that could be potential checkpoints to be targeted to guide proper dental pulp tissue regeneration.

Polydopamine-coated bioactive glass for immunomodulation and odontogenesis in pulpitis.

Preserving vital pulp in cases of dental pulpitis is desired but remains challenging. Previous research has shown that bioactive glass (BG) possesses notable capabilities for odontogenic differentiation. However, the immunoregulatory potential of BG for inflamed pulp is still controversial, which is essential for preserving vital pulp in the context of pulpitis. This study introduces a novel approach utilizing polydopamine-coated BG (BG-PDA) which demonstrates the ability to alleviate inflammation and promote odontogenesis for vital pulp therapy. In vitro, BG-PDA has the potential to induce M2 polarization of macrophages, resulting in decreased intracellular reactive oxygen species levels, inhibition of pro-inflammatory factor, and enhancement of anti-inflammatory factor expression. Furthermore, BG-PDA can strengthen the mitochondrial function in macrophages and facilitate odontogenic differentiation of human dental pulp cells. In a rat model of pulpitis, BG-PDA exhibits the capacity to promote M2 polarization of macrophages, alleviate inflammation, and facilitate dentin bridge formation. This study highlights the notable immunomodulatory and odontogenesis-inducing properties of BG-PDA for treating dental pulpitis, as evidenced by both in vitro and in vivo experiments. These results imply that BG-PDA could serve as a promising biomaterial for vital pulp therapy.

Inflammatory microenvironment of moderate pulpitis enhances the osteo-/odontogenic potential of dental pulp stem cells by autophagy.

AIM: This study investigated the effects of the inflammatory microenvironment of moderate pulpitis on biological properties of human dental pulp stem cells (DPSCs) and further explored the mechanism involved in osteo-/odontogenic induction of the inflammatory microenvironment. METHODOLOGY: Healthy DPSCs (hDPSCs) and inflammatory DPSCs (iDPSCs) were isolated from human-impacted third molars free of caries and clinically diagnosed with moderate pulpitis, respectively. Healthy DPSCs were treated with lipopolysaccharides (LPS) to mimic iDPSCs in vitro. The surface markers expressed on hDPSCs and iDPSCs were detected by flow cytometry. A CCK-8 assay was performed to determine cell proliferation. Flow cytometric analysis was used to evaluate cell apoptosis. The osteo-/odontogenic differentiation of DPSCs was evaluated by western blot, alkaline phosphatase staining, and Alizarin Red S staining. The functions of the genes of differentially expressed mRNAs of hDPSCs and iDPSCs were analysed using gene set enrichment analysis. Transmission electron microscopy and western blot were used to evaluate the autophagy changes of LPS-treated DPSCs. RESULTS: Compared with hDPSCs, iDPSCs showed no significant difference in proliferative capacity but had stronger osteo-/odontogenic potential. In addition, the mRNAs differentially expressed between iDPSCs and hDPSCs were considerably enriched in autophagosome formation and assembly-related molecules. In vitro mechanism studies further found that low concentrations of LPS could upregulate DPSC autophagy-related protein expression and autophagosome formation and promote its odontogenic/osteogenic differentiation, whereas the inhibition of DPSC autophagy led to the weakening of the odontogenic/osteogenic differentiation induced by LPS. CONCLUSIONS: This explorative study showed that DPSCs isolated from teeth with moderate pulpitis possessed higher osteo-/odontogenic differentiation capacity, and the mechanism involved was related to the inflammatory microenvironment-mediated autophagy of DPSCs. This helps to better understand the repair potential of inflamed dental pulp and provides the biological basis for pulp preservation and hard tissue formation in minimally invasive endodontics.