Trends in negative interpersonal relationships at work and awareness of occupational safety and health services: A 2014-2019 trend analysis.

PURPOSE: A good psychosocial climate at work, including positive interpersonal relationships, is a protective factor for health, while social conflict imposes a considerable health risk. Occupational safety and health (OSH) services can help create a positive working environment. In the present study, we analysed trends in the awareness of OSH services and interpersonal relationships and whether these are linked. METHODS: We used time series data from the Italian Survey on Health and Safety at Work (INSuLa) from 2014 and 2019 (n = 16,000 employees). Negative interpersonal relationships included workplace bullying and lack of workplace support. The availability of OSH services was measured through items inquiring about the awareness of OSH representatives and OSH-training. We used Poisson regression reporting prevalence ratios and provided predicted probabilities and average marginal effects to show trends and differences in interpersonal relationships and OSH availability. RESULTS: Our findings suggest that negative interpersonal relationships at work increased, while awareness about OSH services declined between 2014 and 2019. These trends were particularly strong for young workers for whom workplace bullying increased by 6.3% and awareness of OSH training declined by 11.7%. We also found that unawareness about OSH services is associated with negative interpersonal relationships at work. CONCLUSION: The results suggest that low OSH awareness may be an increasing problem, while exposure to an adverse social climate at work became more frequent at the same time. Given the role of OSH services in ensuring a positive working climate, it is important to increase workers' awareness about OSH services.

Analysis of the effectiveness and user experience of employing virtual reality to enhance the efficacy of occupational safety and health learning for electrical workers and graduate students.

Introduction: The integration of engineering approaches in education and training is pivotal for reducing workplace incidents. Effective safety education increases workers' awareness of potential risks and fosters a robust Occupational Safety and Health (OSH) culture. Virtual reality (VR) offers immersive experiences that enhance the efficacy of safety training. Method: This study evaluated VR's effectiveness through two experiments that demonstrated improved learning capacities. The first study employed quantitative methods and quasi-experiments with electrical sector technical support professionals. The second study used a qualitative approach with scenario case studies involving graduate students. Results: The quantitative study revealed significant improvements in OSH understanding among electrical workers, highlighting VR-based training's superiority over traditional methods. The qualitative study found positive outcomes in VR usability and user experience among graduate students, affirming VR's effectiveness in OSH education. Conclusion: VR has proven to be an effective and efficient training tool for both graduate students and experienced workers. It significantly advances skills, knowledge, and proficiency in electrical engineering by providing realistic, immersive, and tailored learning experiences. As VR technology continues to evolve, its role in shaping the future of electrical technical education and training appears increasingly promising.

Working Hours, Shift, and Remote Work by Industry and Occupation in U.S. Full-time Workers.

BACKGROUND: This study examines working hours, shift work, and remote work patterns by occupation and industry among U.S. full-time workers, along with the association between working and sleeping hours. METHODS: Utilizing data from 2011 to 2020 American Time Use Survey, this national household survey examines how individuals aged 15 years or older in the United States spend their time within a 24-hour period. FINDINGS: In 2011 to 2019, U.S. full-time workers averaged 8.1 hours of work and 7.8 hours spent sleep on workdays, increasing to 9.6 hours on non-workdays. Among all occupations, Emergency medical technicians and paramedics had the longest average working hours (10.4 hours). Protective services occupations had the highest percentage (41.7%) of workers reporting often working shifts other than daytime. Among all industries, truck transportation industry had the longest average working hours (9.2). Food services and drinking places industries had the highest percentage (28.6%) of workers reporting often working shifts other than daytime. Working hours showed a negative association with sleeping hours. In 2020, 34.0% of full-time workers reported remote work due to COVID-19, with the largest percentage (72.3%) occurring in business and financial operations. CONCLUSIONS: The study findings offer essential benchmarks for comparing working hours and schedules across diverse occupations and industries. These insights empower occupational health practitioners to advocate for prevention measures, addressing health concerns arising from prolonged working hours and shift work.

Addressing Worker Safety and Health Through the Lens of Strategic Enforcement-Part One.

Ensuring the safety and health of workers in this country, who are employed at millions of workplaces that present a dizzying array of hazards, is daunting. Every day, workers are maimed or die from workplace injuries or occupational illnesses. Hence, government agencies must use all available means to ensure the laws intended to keep workers safe and healthy in their workplaces are maximally effective in accomplishing that purpose. This paper addresses this challenge through the lens of strategic enforcement. It examines how federal and state authority are designed to interact to ensure worker protection in this space, and focuses on what tools for deterring violations - many unrecognized or underutilized by worker safety agencies - are available to leverage the limited resources that inevitably constrain the agencies' reach. The forthcoming Part II will, among other things, showcase a number of noteworthy state and local initiatives that exceed the federal standard.

Occupational Disease in New York State: The Political Economic Context.

In 1987 Landrigan and Markowitz co-authored a report entitled "Occupational Disease in New York State." They found that death and illness from occupational disease were common and that the costs of exposure to hazardous conditions warranted public funding for new occupational health infrastructure in New York State. A recent confirmatory report recognized a wider spectrum of contemporary hazards and emphasized how public health problems connect to work. These reports provide factual snapshots at 2 points in time, but they do not explain nor analyze the changing conditions they describe. Including macro-contexts such as globalization, financialization, and neoliberalism, this article demonstrates several unique occupational safety and health implications by clarifying key themes related to the state's role, especially regulation and healthcare delivery systems. Conclusions directly tie the trajectory of occupational disease to workers' collective ability to confront and roll back neoliberalism while pushing occupational disease out of its medical/science silo.

Who do you ask? predicting injury rates from survey responses.

BACKGROUND: Few studies have addressed whether using manager or worker perceptions of safety policies and practices alone predict reported injury rates less accurately than using both. OBJECTIVE: This study provides an example and describes a method that can be used to address this issue with survey instruments designed to measure safety climate, policies, or practices. METHODS: Using multilevel logistic regression, we estimated the relationship between worker and manager perceptions of a given exposure and the odds of worker injury during the post-survey year for three safety scales. We tested whether surveying both workers and managers provides additional predictive value compared with surveying just one group. RESULTS: Injury in the year following the survey was significantly associated with worker scores on two of the three scales. Manager responses were not significantly associated with injury and did not significantly improve injury rate prediction when added to a model with only worker survey responses. CONCLUSIONS: The capacity of manager-only or worker-only perceptions of safety policies and practices to predict worker injuries should be established before choosing to survey just one or the other. The approach and findings in this paper can be applied to other survey instruments and in other settings to help make this choice.

The Total Worker Health® (TWH) approach: a systematic review of its application in different occupational settings.

BACKGROUND: The National Institute for Occupational Safety and Health (NIOSH), in 2011, developed the "Total Worker Health®" (TWH) as a holistic approach to protect and promote the workers' safety, health, and well-being. After over ten years from the TWH development, the aim of the present systematic review is to provide a comprehensive overview of the worldwide TWH initiatives. METHODS: PubMed, Scopus and ISI Web of Science were searched for TWH studies published up to the 31st of July 2023, and 43 investigations could be included. The review was registered on the International prospective register of systematic reviews PROSPERO with the reference number CRD42023416972. RESULTS: Issues that emerged as relevant for the TWH operationalization were the awareness about the TWH approach and fundamentals, the leadership commitment, and a participatory engagement of the workforce: these aspects all contributed to acceptable and effective setting oriented TWH plans, specifically tailored on the peculiarities of the workplace, including small enterprises and multiemployer worksites. Evaluation and continual improvement were reported as fundamental for the successful implementation of TWH initiatives. Limited resources for safety and health initiatives, in terms of time, people, and funds, together with difficulties in the identification of safety and health priorities and a poor participatory culture were recognized as obstacles to the TWH application. Training resulted the core component of the TWH leadership and workforce preparedness, with beneficial results in terms of safety culture and adoption of preventive measures. CONCLUSIONS: Although interesting aspects emerged from our review, future longitudinal investigations should confirm the effectiveness, easy integration, and long-term sustainability of TWH models in different workplaces, in order to effectively support safe and health-enhancing works able to improve innovation and productivity.

Evaluation of the Level of Psychological Distress in Construction Workers during the COVID-19 Pandemic in Southern Spain.

The COVID-19 pandemic posed a major challenge for construction companies, which were confronted with the need to prevent the enormous negative socio-psychological impact of the pandemic on their employees. The aim of this study was to evaluate the level of psychological distress among construction workers in an advanced phase of the COVID-19 pandemic in Andalusia, southern Spain. For this, a cross-sectional descriptive study was conducted using online questionnaires with data on sociodemographic variables and employment situation, COVID-19 pandemic-related data, and Goldberg's General Health Questionnaire (GHQ-12). A total of 860 questionnaires from all provinces of Andalusia, Spain, were collected between March and May 2022. Descriptive statistical analyses and non-parametric Mann-Whitney U and Chi-squared tests were performed, followed by logistic regression analysis. The incidence of psychological distress was higher among women, individuals under 43 years of age, those with a family income below EUR 1200, participants whose working conditions had been affected by the pandemic, those who had not received adequate means or specific training to protect themselves from infection, those who had experienced symptoms, those who had suffered side effects after vaccination, and those who had been hospitalised. The logistic regression analysis predicted the occurrence of psychological distress in this study by the effect of the pandemic on mental/emotional well-being, the working conditions affected during the pandemic, health-related variables, and the age of the worker. The correctly classified percentage was 75.1%. Assessing psychological distress in construction sectors may allow for the identification of vulnerable groups or even help to reduce the number of errors in daily practice and potential risks of occupational injury or illness.

Risk assessment industry driven approach in occupational health and safety.

Introduction: Risk assessment and management in companies plays a significant role in the prevention section of any field. In the field of Occupational Health and Safety (OHS), its inconsistent or incorrect application has a direct impact on the life and health of employees. In some companies, even today, it is not properly implemented and adequate procedures and methods are not used. The article discusses the development of a step-by-step procedure for risk assessment in industrial environments in the area of OHS. Methods: Main parts of the model and its steps present the partial results of a survey conducted on a sample of 500 small and micro enterprises in the field of risk assessment and the systematic procedure developed following the main survey results. The survey covered only enterprises located in the construction, manufacturing, transport and storage and agriculture, forestry and fishing sectors, which is also a significant statistical feature. Within the structure of respondents, statistical features such as: size of enterprise, sector, region by work are identified. Only enterprises with size by number of employees - micro enterprises from 1 to 9 employees and small enterprises from 10 to 49 employees - were included for the survey. Results: New elements of the methods were integrated into the developed systematic procedure, which was subsequently validated in 7 plants of the one company on the same position. The application of the developed model was verified by an expert group consisting of 7 members, an odd number, and the developed checklists and risk register were applied. On the basis of the verification, the model, checklist and risk register were corrected. In addition, the scoring method and the risk matrix were also used, but they did not contain new elements. Discusion: The procedure is still in use today and employees have been trained to use it. On the basis of the developed methodology and the Checklist, the procedure has been transposed into the European OiRA tool and can be used by companies throughout the European Union.

"Caminando Con Riesgo": perceptions of occupational injury, workplace safety and workers rights among Spanish-speaking hospitalized patients.

Introduction: Occupational health disparities are well documented among immigrant populations and occupational injury remains a high cause of morbidity and mortality among immigrant populations. There are several factors that contribute to the high prevalence of work-related injury among this population and those without legal status are more likely to experience abusive labor practices that can lead to injury. While the work-related injuries and experiences of Spanish-speaking workers have been explored previously, there is a paucity of literature documenting injury among hospitalized patients. Additionally, there are few documented hospital-based occupational injury prevention programs and no programs that implement workers rights information. The purpose of this study was to further explore the context of work related injuries primarily experienced by Spanish speaking patients and knowledge of their rights in the workplace. Methods: This was a semi-structured qualitative interview study with Spanish speaking patients admitted to the hospital for work related injuries. The study team member conducting interviews was bilingual and trained in qualitative methodology. An interview guide was utilized for all interviews and was developed with an immigrant workers rights organization and study team expertise, and factors documented in the literature. Participants were asked about the type and context of the injury sustained, access and perceptions of workplace safety, and knowledge of participants rights as workers. All interviews were conducted in Spanish, recorded, transcribed in Spanish and then translated into English. A codebook was developed and refined iteratively and two independent coders coded all English transcripts using Dedoose. Interviews were conducted until thematic saturation was reached and data was analyzed using a thematic analysis approach. Results: A total of eight interviews were completed. All participants reported working in hazardous conditions that resulted in an injury. Participants expressed a relative acceptance that their workplace environment was dangerous and acknowledged that injuries were common, essentially normalizing the risk of injury. There were varying reports of access to and utilization of safety information and equipment and employer engagement in safety was perceived as a facilitator to safety. Most participants did have some familiarity with Occupational Safety and Health Administration (OSHA) inspections but were not as familiar with OSHA procedures and their rights as workers. Discussion: We identified several themes related to workplace injury among Spanish speaking patients, many of which raise concerns about access to workplace safety, re-injury and long-term recovery. The context around immigration is particularly important to consider and may lead to unique risk factors for injury, recovery, and re-injury both in the workplace and beyond the workplace, suggesting that perhaps immigration status alone may serve as a predisposition to injury. Thus, it is critical to understand the context around work related injuries in this population considering the tremendous impact of employment on one's health and financial stability. Further research on this topic is warranted, specifically the exploration of multiple intersecting layers of exposure to injury among immigrant populations. Future work should focus on hospital-based strategies for injury prevention and know your rights education tailored to Spanish speaking populations.

Assessing the impact of authorisation process as a regulatory tool in the European REACH regulation: A study on improving occupational safety for applying companies.

This study looks into the effectiveness of the authorisation procedure as a regulatory instrument within the framework of the European REACH regulation. It highlights its impact on enhancing occupational safety and health for both applicants and companies utilising the substances. This procedure encompasses manufacturers, importers, and downstream users of substances, as well as representatives of foreign manufacturers who are also eligible to seek authorisation. When applying for authorisation, the ECHA Risk Assessment Committee (RAC) assesses the risks associated with the intended uses of the substance, including the appropriateness and effectiveness of the Occupational Conditions (OCs) and Risk Management Measures (RMMs) described in the application and the risks posed by potential alternatives. If the RAC determines that the OCs/RMMs are inadequate for managing or controlling the risk, or if the measures to protect workers are deemed insufficient, it may recommend additional measures to enhance occupational safety and health or environmental protection. The 398 processed Applications for Authorisation (AfA) that have been submitted to date were examined to determine these recommended measures, categorised as Conditions for use, Monitoring arrangements, and Recommendations for Review Reports. Overall, a significant improvement concerning occupational safety and health seems necessary, as indicated by the large number of measures recommended by the ECHA Committee for Risk Assessment (RAC) and ECHA Committee for Socio-economic Analysis (SEAC) or supplemented by the European Commission. In addition to the proposed measures, a short assessment provided by the committees as to whether the operational conditions and risk management measures are adequate in controlling the risks is also included in the study.

Making Our Hospitals a Safe Workplace: Hazard Identification and Risk Assessment at a Tertiary-Level Public Hospital in Eastern India.

BACKGROUND: Hospitals are complex places with a large number of employees, patients, furniture, equipment, etc. Healthcare workers (HCWs), patients, or the general public are vulnerable to injuries and illness due to unseen hazards at the workplace. This study aims to identify the hazards and assess the risks at a hospital to ensure safety for HCWs, patients, and the public and generate awareness about the same. It helps in reducing the financial obligation of the institution due to the treatment of illnesses of staff, absenteeism, and service disruption and slows down manpower turnover. Hazard Identification and Risk Assessment (HIRA) helps reduce human errors and promote safe behavior. OBJECTIVE: This study aims to identify and study the hazards in a hospital, assess the risks associated with the hazards, and recommend methods to reduce or eliminate the hazards based on the outcomes of the study. METHODOLOGY: An observational study was conducted at a 1000-bed tertiary-level teaching public sector hospital in eastern India. A checklist was used for direct observation, conducting staff interviews, and document reviews. A risk scoring tool was used, and hazards were ranked as per the risk score. RESULTS: Thirty-eight hazards were identified in the study and classified under the categories of natural, physical, chemical, biological, ergonomic, psychological, and safety. The fire risk and occurrence of cyclones had the highest risk scores. CONCLUSIONS: The study identified hazards through direct observations, record reviews, and staff interviews. These findings can guide the prioritization of areas requiring necessary action in risk reduction, ensuring a safe workplace for healthcare workers (HCWs), patients, and the public. They can also help the institution shift from a reactive approach to a proactive method for HCW safety.

The Safe Home Care Intervention Study: Implementation Methods and Effectiveness Evaluation.

Home care (HC) aides experience numerous safety hazards in clients' homes; many hazards also put clients at risk. We hypothesized that safety coaching led by nurse managers (NMs) during their initial HC needs assessment could prompt clients to improve safety conditions in their homes. Following a 2-arm proof-of-concept intervention study design, intervention NMs used motivational interviewing (MI), facilitated by a safety handbook and video, to coach clients on home safety improvements. Control arm NMs performed intake assessments with no changes to usual practices. Intervention effectiveness was assessed by NMs and aides. Three HC agencies and two elder services contributed 35 intervention and 23 control homes. NMs coached 97% of clients and reported that 94% were engaged; 63% implemented improvements. NMs' and aides' assessments were consistent; homes with clients reported by NMs as resistant to safety changes had higher aides' hazard scores. Client coaching can be effective for improving HC safety.

An urgent call to address work-related psychosocial hazards and improve worker well-being.

Work-related psychosocial hazards are on the verge of surpassing many other occupational hazards in their contribution to ill-health, injury, disability, direct and indirect costs, and impact on business and national productivity. The risks associated with exposure to psychosocial hazards at work are compounded by the increasing background prevalence of mental health disorders in the working-age population. The extensive and cumulative impacts of these exposures represent an alarming public health problem that merits immediate, increased attention. In this paper, we review the linkage between work-related psychosocial hazards and adverse effects, their economic burden, and interventions to prevent and control these hazards. We identify six crucial societal actions: (1) increase awareness of this critical issue through a comprehensive public campaign; (2) increase etiologic, intervention, and implementation research; (3) initiate or augment surveillance efforts; (4) increase translation of research findings into guidance for employers and workers; (5) increase the number and diversity of professionals skilled in preventing and addressing psychosocial hazards; and (6) develop a national regulatory or consensus standard to prevent and control work-related psychosocial hazards.

Contextualizing injury severity from occupational accident reports using an optimized deep learning prediction model.

Background: This study introduced a novel approach for predicting occupational injury severity by leveraging deep learning-based text classification techniques to analyze unstructured narratives. Unlike conventional methods that rely on structured data, our approach recognizes the richness of information within injury narrative descriptions with the aim of extracting valuable insights for improved occupational injury severity assessment. Methods: Natural language processing (NLP) techniques were harnessed to preprocess the occupational injury narratives obtained from the US Occupational Safety and Health Administration (OSHA) from January 2015 to June 2023. The methodology involved meticulous preprocessing of textual narratives to standardize text and eliminate noise, followed by the innovative integration of Term Frequency-Inverse Document Frequency (TF-IDF) and Global Vector (GloVe) word embeddings for effective text representation. The proposed predictive model adopts a novel Bidirectional Long Short-Term Memory (Bi-LSTM) architecture and is further refined through model optimization, including random search hyperparameters and in-depth feature importance analysis. The optimized Bi-LSTM model has been compared and validated against other machine learning classifiers which are naïve Bayes, support vector machine, random forest, decision trees, and K-nearest neighbor. Results: The proposed optimized Bi-LSTM models' superior predictability, boasted an accuracy of 0.95 for hospitalization and 0.98 for amputation cases with faster model processing times. Interestingly, the feature importance analysis revealed predictive keywords related to the causal factors of occupational injuries thereby providing valuable insights to enhance model interpretability. Conclusion: Our proposed optimized Bi-LSTM model offers safety and health practitioners an effective tool to empower workplace safety proactive measures, thereby contributing to business productivity and sustainability. This study lays the foundation for further exploration of predictive analytics in the occupational safety and health domain.

[Occupational health policies in older workers: comparative analysis between Spain and Chile]. / Políticas en salud laboral en personas trabajadoras mayores: análisis comparativo entre España y Chile.

OBJECTIVE: To analyze and compare the current Spanish and Chilean regulations regarding occupational risk prevention, regarding the existence of specific indications that protect the occupational health and safety of people over 55 years of age. METHOD: Qualitative study in which a documentary content analysis was carried out using ATLAS/ti. The sample was 88 regulatory documents on occupational risk prevention for Spain and Chile. The guidance of the European Agency for Safety at Work (EU-OSHA) regarding age-critical risks was followed. RESULTS: In global terms, 21.9% of the total Spanish documents analyzed show the explicit presence of considerations on aging, while for Chile this occurs in 9%. Both countries mention indications regarding ergonomic risks and noise. Shift work and psychosocial risks are considered only in Spain, while extreme temperatures, vibrations and geographical altitude appear exclusively in Chilean regulations. Neither country refers to issues inherent to working women (care responsibilities, menopause). CONCLUSIONS: The Spanish regulations present a greater presence of indications on aging compared to the Chilean one. However, development in this area is insufficient in both countries. Chile and Spain have guides of recommendations, which are not mandatory, and their application is voluntary. This suggests that the prevention of occupational risks has a great pending challenge with people over 55 years of age.

Proposal and practicality of an alternative blue-light hazard risk assessment method for high-intensity white-light sources at workplaces.

Objectives. It is prescribed to determine blue-light hazard (BLH) weighted radiances, LB, for an assessment of spotlights with an angular subtense α≥11mrad. The BLH weighted irradiance, EB, can be used alternatively for smaller sources. Appropriate instruments are not common among persons commissioned with risk assessment (RA), and especially LB measurements may be challenging. Therefore, a practical BLH RA approach is proposed that is based on illuminance, Ev, pre-calculated blackbody BLH efficacies of luminous radiation, KB,vPlanck, and solid angle considerations. Methods. The practicality of this method was examined and compared against other RA approaches. Results. To ensure comparability of the applied instruments, measurements were performed close to a radiance standard, showing deviations within the lamp's expanded uncertainties (<4%), whereas the deviations were ±15% for longer distances. Focusing on a complex light-emitting diode (LED) spotlight, all detected values could be converted to LB by means of the RA methods within ±20%. Two field tests with several spotlights yielded maximum permissible exposure durations (MPED) obtained from the different RA approaches that agreed among each other within uncertainties largely below ±30%. Conclusion. The general practicality of the proposed Ev method can be concluded for a workplace BLH RA of white-light sources.

Descriptive summary of fatal work-related injuries, Western States, 2011-2017.

Work-related deaths are a persistent occupational health issue that can be prevented. However, prevention opportunities can be hampered by a lack of adequate public health resources. The Western States Occupational Network (WestON) is a network of federal, state, and local occupational health professionals that includes a 19-state region of the United States. To encourage public health collaboration, WestON partners examined work-related fatalities within the region. Fatality counts (numerators) were obtained from the U.S. Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries restricted-access research files for all workers ages ≥15 years and fatally injured in WestON states from 2011 through 2017. Estimates of full-time equivalent hours worked (FTE) (denominators) were retrieved from the BLS Current Population Survey. Annual average fatality rates were calculated as number of fatalities per 100,000 FTE over the study period. Rates were stratified by state, select demographics, industry sector, and event/exposure types. Pearson chi-squared tests and rate ratios with 95% confidence probability limits were used to assess rate differences. All analyses were conducted using SAS v.9.4. From 2011 through 2017, the annual average overall occupational fatality rate for the WestON region was 3.5 fatalities per 100,000 FTE, comparable to the overall U.S. fatality rate. Male workers had a fatality rate almost 10 times higher than female workers in the region. Fatality rates increased with successive age groups. Alaska and New Mexico had significantly higher fatality rates for all racial/ethnic groups compared to respective regional rates. Wyoming, North Dakota, and Montana had the three highest occupational fatality rates among foreign-born workers. Agriculture/forestry/fishing, mining/oil/gas extraction, and transportation/warehousing/utilities were industry sector groups with the three highest fatality rates regionally. Transportation-related incidents were the most frequent event type associated with occupational fatalities for all 19 states. Work-related fatalities are a crosscutting occupational public health priority. This analysis can be an impetus for collaborative multistate initiatives among a dynamic and varied occupational public health network to better meet the needs of a rapidly changing workforce.