RESUMEN
We disclose a mediated electrochemical [2+2+2] annulation of alkynes with nitriles, forming substituted pyridines in a single step from low-cost, readily available starting materials. The combination of electrochemistry and a triarylamine redox mediator obviates the requirements of transition metals and additional oxidants. Besides the formation of diarylpyridine moieties via the homocoupling of two identical alkynes, the heterocoupling of two different alkynes depending on their electronic nature is possible, highlighting the unprecedented control of chemoselectivity in this catalytic [2+2+2] process. Mechanistic investigations like cyclic voltammetry and crossover experiments combined with DFT calculations indicate the initial oxidation of an alkyne as the key step leading to the formation of a vinyl radical cation intermediate. The utilization of continuous flow technology proved instrumental for an efficient process scale-up. The utility of the products is exemplified by the synthesis of π-extended molecules, being relevant for material or drug synthesis.
RESUMEN
Our study unveils a pioneering methodology that effectively distributes Pd species within a zeolitic imidazolate framework-8 (ZIF-8). We demonstrate that Pd can be encapsulated within ZIF-8 as atomically dispersed Pd species that function as an excited-state transition metal catalyst for promoting carbon-carbon (C-C) cross-couplings at room temperature using visible light as the driving force. Furthermore, the same material can be reduced at 250 °C, forming Pd metal nanoparticles encapsulated in ZIF-8. This catalyst shows high rates and selectivity for carbon dioxide hydrogenation to methanol under industrially relevant conditions (250 °C, 50 bar): 7.46 molmethanol molmetal-1 h-1 and >99%. Our results demonstrate the correlations of the catalyst structure with the performances at experimental and theoretical levels.
RESUMEN
Three new tridentate copper(II) N-heterocyclic carbene (NHC) complexes have been obtained and characterized with symmetrical C-4 substitutions on their pendent pyridine rings. Substitutions including methyl (Me), methoxy (OMe), and chloro (Cl) groups, which extend the library pincer Cu-NHC complexes under investigation, modify the impact of pyridinyl basicity on NCN pincer complexes. Both ligand precursors and copper(II) complexes are characterized using a range of techniques, including nuclear magnetic resonance (NMR) spectroscopy for 1H, 13C, 31P, and 19F nuclei, electrospray ionization mass spectrometry (ESI-MS), X-ray crystallography, cyclic voltammetry, and UV-Vis spectroscopy. The pyridine substitutions lead to minimal changes to bond lengths and angles in the X-ray crystal structures of these related complexes; there is a pronounced impact on the electrochemical behavior of both the ligand precursors and copper complexes in the solution. The substitution in the pyridinyl units of these complexes show an impact on the catalytic reactivity of these complexes as applied to a model C-N bond-forming reaction (CEL cross-coupling) under well-established conditions; however, this observation does not correlate to the expected change in basicity in these ligands.
RESUMEN
Herein, we disclose the first report on gold-catalyzed C(sp2)-CN cross-coupling reaction by employing a ligand-enabled Au(I)/Au(III) redox catalysis. This transformation utilizes acetone cyanohydrin as a nucleophilic cyanide source to convert simple aryl and alkenyl iodides into the corresponding nitriles. Combined experimental and computational studies highlighted the crucial role of cationic silver salts in activating the stable (P,N)-AuCN complex towards the oxidative addition of aryl iodides to subsequently generate key aryl-Au(III) cyanide complexes.
RESUMEN
In this study chitin derived from shrimp shells was used in the design of heterogeneous Pd-based catalysts for Heck and Suzuki-Miyaura cross-coupling reactions. The synthesis of Pd nanoparticles supported on N-doped carbons was performed through different approaches, including a sustainable mechanochemical approach, by using a twin-screw extruder. All catalytic systems were characterized by a multitechnique approach and the effect of nanoparticles size, N-doping on the support, and their synergistic interactions were elucidated. Specifically, Kelvin Probe Atomic Force Microscopy provided valuable insights on charge transfer and metal-support interactions. The catalytic behaviour of the samples was investigated in cross-coupling reactions under batch conditions and under semi-continuous flow solvent-free conditions, respectively obtaining a quantitative yield and a noteworthy productivity of 8.7 mol/(gPdh).
RESUMEN
A highly selective cross-coupling reaction between Si-OAc (AcO = acetoxy) and Si-OH compounds that generates unsymmetrical and symmetrical oligosiloxanes concurrent with the release of acetic acid has been developed. The high selectivity arises from the reactivity difference that depends on the varying number of acetoxy groups present, thus facilitating a clean one-pot synthesis of oligosiloxanes. For instance, the reactions of di-, tri-, or tetraacetoxysilanes with silanols furnish acetoxy-containing di- and trisiloxanes in high yield. Two equivalents of tetraacetoxysilane can react with various silanediols to form 1,1,1,3,3,3-hexaacetoxytrisiloxanes, which subsequently react with a second molecule of a silanediol to selectively afford 1,1,3,3-tetraacetoxycyclotetrasiloxanes. The cyclotetrasiloxanes further react with a third molecule of silanediol to provide unprecedented bicyclic pentasiloxanes with acetoxy groups at the bridgehead silicon atoms. Applications of the acetoxy-containing products as efficient surface-treatment agents and new building blocks for highly heat-resistant materials are demonstrated.
RESUMEN
Anilines are ubiquitous in bio-active compounds and their synthesis can be achieved via metal-catalyzed cross-coupling reactions involving aryl halides. We describe an unusual, yet simple, CuII-catalyzed system for the amination of aryl chlorides in pure aqueous ammonia with 2.5 mol% catalyst loading under non-inert conditions. Different from previous systems, the reaction proceeds even without an additional organic solvent. Copper(II) sulfate in combination with 4,7-dimethoxy-1,10-phenanthroline enabled the amination of several aryl chlorides containing electron-neutral, -donating and -withdrawing groups to the corresponding anilines with good to excellent yields. The upscaling potential of the procedure has been shown by the synthesis at 50 mmol scale. The reaction proceeds as one of the rare cases of a CuII-assisted coupling, in contrast to the typical CuI-CuIII intermediates postulated for most Ullmann-type coupling reactions. The copper(II) center allows for a nucleophilic substitution pathway, enabled by the deprotonation of coordinated ammonia.
RESUMEN
The synthetic potential of substituted 1,4-dioxenes is well recognised, although the chemistry of 2-aryl-1,4-dioxenes is relatively unexplored. Their transition metal-catalysed synthesis has been limited to Stille-type cross-coupling chemistry, typically showing long reaction times, or proceeding at high reaction temperatures. Here we present a facile and general methodology for the cross-coupling of aryl bromides with lithium 1,4-dioxene, affording a range of 2-aryl-1,4-dioxenes in generally good yields. We highlight the synthetic applicability of this transformation at multigram scale, and demonstrate the versatility of the products by conversion of the dioxene units to various carbonyl-based functionalities. Additionally, we present a concise two-step synthesis of an arylated analogue to a known 1,4-dioxene-based antifungal agent.
RESUMEN
The [2+2] cycloaddition reaction between the Si=C double bond of adamantylsilene and the carbonyl group of aliphatic, aromatic or acetylenic ketones and aldehydes is demonstrated. The product of this reaction that is central to a non-ionic version of the Peterson olefination is an unusual four-membered 1,2-silaoxetane heterocycle that was characterized spectroscopically and crystallographically. In the presence of SiO2, the silaoxetane undergoes retro-cycloaddition with the formation of alkene products. As the [2+2] cycloaddition proceeds without the necessity of any base, enolizable ketones can be converted into olefins. In addition, it is shown that the adamantylsilene can be produced in situ by a sila-Peterson reaction, providing valuable input for the development of a new one-pot silicon-based reductive carbonyl-carbonyl cross coupling methodology.
RESUMEN
Quantitative molecular structure-reactivity models are useful for generating predictions to guide synthesis design, and in formulating and testing mechanistic hypotheses. We report an expanded multivariate linear regression (MLR) model for the rate of (hetero)aryl (pseudo)halide oxidative addition to L2Pd(0), here exemplified by Pd(PCy3)2. This builds on a prior model from our group, with additional substrate classes (aryl chlorides and iodides) and reaction solvents (THF, toluene, THF/DMF mixture). Overall solvent effects across the entire substrate set are minimal under these conditions, enabling a unified MLR model without introduction of new molecular descriptors beyond the original five. Examining the mechanistic origin of the two molecular electrostatic potential (ESP) descriptors led to generation of a simpler, four descriptor model that is suitable for aryl halides, but not for 2-halopyridines. Using this model we identified a mechanistic outlier, 2-pyridyl triflate, which undergoes a nucleophilic displacement oxidative addition that does not involve the adjacent nitrogen atom. Finally, we discuss the relationship between C-X bond strength and oxidative addition rates, and compare the intrinsic bond strength index (IBSI) to bond dissociation enthalpy (BDE) as a bond strength descriptor.
RESUMEN
We report a study of solvent effects on the rate, selectivity, and mechanism of (hetero)aryl (pseudo)halide oxidative addition to Pd(PCy3)2 as an exemplar of L2Pd(0) species. First, 2-chloro-3-aminopyridine is observed to undergo faster oxidative addition in toluene compared to more polar solvents, which is not consistent with the trend we observe with many other 2-halopyridines. We attribute this to solvent basicity hydrogen-bonding (pKHB) between solvent and substrate. Greater hydrogen-bond donation from the substrate leads to a more electron-rich aromatic system, and therefore slower oxidative addition. We demonstrate how this affects rate and site-selectivity for hydrogen-bond donating substrates. Second, electron-deficient multihalogenated pyridines exhibit improved site-selectivity in polar solvents, which we attribute to different C-X sites undergoing oxidative addition by two different mechanisms. The C-X site that favours the more polar nucleophilic displacement transition state is preferred over the site that favours a less-polar 3-centered transition state. Finally, (hetero)aryl triflates consistently undergo faster oxidative addition in more polar solvents, which we attribute to highly polar nucleophilic displacement transition states. This leads to improved site-selectivity for C-OTf oxidative addition, even in the presence of highly reactive 2-pyridylhalides.
RESUMEN
Kumada cross-coupling reaction is useful for producing biphenyls, where nickel and copper have been widely investigated as catalysts but mainly homogeneous ones. In this study, we investigated ultrasound-assisted-Kumada cross-coupling reaction over the heterogeneous catalysts in which Ni2+, Cu2+, or both was immobilized on aminopropylsilane-functionalized-SiO2-TiO2 prepared in the presence of cetyltrimethylammonium bromide (CTAB). The presence of CTAB effectively prevented the particle growth and therefore SiO2-TiO2 fine particles with high surface area (502 m2 g-1) were formed. The Ni2+-immobilized catalyst showed high catalytic activity for the ultrasound-assisted-Kumada cross-coupling reaction of a wide variety of substrates and was reusable three times. Performing the reaction under ultrasound irradiation was very effective in significantly accelerating the reaction rate compared with the conventional mechanical method. In contrast to Ni2+, Cu2+ was deposited on the support as crystalline Cu(OH)2 and the resulting catalysts with Cu2+ and Ni2+-Cu2+ were less active and less stable under the reaction conditions.
RESUMEN
P-stereogenic phosphines, renowned for their utility as ligands and catalysts, have been instrumental in the field of asymmetric catalysis. However, the catalytic asymmetric synthesis of chiral ligands possessing both axial and phosphine chirality remains a significant challenge. Here, we present the successful demonstration of a Cu-catalyzed asymmetric C-P construction using in situ generated secondary phosphine and heteroaryl chloride. By introducing a chiral NHC ligand and an achiral diphosphine auxiliary ligand, we effectively alleviated the poisoning effect caused by phosphine(III) compounds and suppressed the nonenantioselective background reaction. The reaction exhibited excellent enantioselectivity, with up to 96% ee, and good diastereoselectivity, with up to 14:1 dr, when employing less sterically hindered secondary phosphines. This particular substrate poses a significant challenge due to its strong poisoning effect in copper catalysis.
RESUMEN
A visible-light-induced cascade reaction is described for the one-pot synthesis of 6-hydroxyindoloquinazolinones using isatins (or isatins and isatoic anhydrides) and aliphatic carboxylic acids. The method provides 36 desired products in 33-96 % yield, exhibiting broad substrate scope and good functional group tolerance. This approach utilizes inexpensive and commercially available starting materials, enabling the direct construction of high-value complex structures under mild conditions without the need for photocatalyst, showcasing significant applicability and environmental friendliness.
RESUMEN
Over the years, polynuclear cyclic or torus complexes have attracted increasing interest due to their unique metal topologies and properties. However, the isolation of polynuclear cyclic organometallic complexes is extremely challenging due to their inherent reactivity, which stems from the labile and reactive metal-carbon bonds. In this study, the pyrazine ligand undergoes a radical-radical cross-coupling reaction leading to the formation of a decanuclear [(Cp*)20Dy10(L1)10] â 12(C7H8) (1; where L1 = anion of 2-prop-2-enyl-2H-pyrazine; Cp* = pentamethylcyclopentadienyl) complex, where all DyIII metal centres are bridged by the anionic L1 ligand. Amongst the family of polynuclear Ln organometallic complexes bearing CpR 2Lnx units (CpR = substituted cyclopentadienyl), 1 features the highest nuclearity obtained to date. In-depth computational studies were conducted to elucidate the proposed reaction mechanism and formation of L1, while probing of the magnetic properties of 1, revealed slow magnetic relaxation upon application of a static dc field.
RESUMEN
Chalcones are a class of naturally occurring flavonoid compounds associated to a variety of biological and pharmacological properties. Several reviews have been published describing the synthesis and biological properties of a vast array of analogues. However, overviews on the reactivity of chalcones has only been explored in a few accounts. To fill this gap, a systematic survey on the most recent developments in the transition metal-catalyzed transformation of chalcones was performed. The chemistry of copper, palladium, zinc, iron, manganese, nickel, ruthenium, cobalt, rhodium, iridium, silver, indium, gold, titanium, platinum, among others, as versatile catalysts will be highlighted, covering the literature from year 2000 to 2023, in more than 380 publications.
RESUMEN
Herein, for the first time, we disclose the gold-catalyzed alkoxy-carbonylation of aryl and vinyl iodides utilizing ligand-enabled Au(I)/Au(III) redox catalysis. The present methodology is found to be general, efficient, employs mild reaction conditions and showcases a broad substrate scope even with structurally complex molecules. Density functional theory (DFT) calculations revealed mechanistic pathways distinct from those of conventional transition metal-catalyzed carbonylation reactions.
RESUMEN
In this work, through the Suzuki-Miyaura cross-coupling reaction with high yields, new π-conjugated azulene compounds containing diphenylaniline groups at positions 2 and 6 of azulene were synthesized. The obtained diphenylaniline-azulenes have intensely visible-light absorbing and emitting (in the wavelength range from 400 to 600 nm) properties. It has been shown that such unique optical properties, in particular fluorescent emission in the region of blue and green photoluminescence (λem at 495 and 525 nm), which were absent in the original azulene, are the result of the electron donor effect of diphenylaniline groups, which significantly changes the electronic structure of azulene and leads to the allowed HOMO â LUMO electron transition.
RESUMEN
This review introduces the synthetic organic chemical value of α-bromocarbonyl compounds with tertiary carbons. This α-bromocarbonyl compound with a tertiary carbon has been used primarily only as a radical initiator in atom transfer radical polymerization (ATRP) reactions. However, with the recent development of photo-radical reactions (around 2010), research on the use of α-bromocarbonyl compounds as tertiary alkyl radical precursors became popular (around 2012). As more examples were reported, α-bromocarbonyl compounds were studied not only as radicals but also for their applications in organometallic and ionic reactions. That is, α-bromocarbonyl compounds act as nucleophiles as well as electrophiles. The carbonyl group of α-bromocarbonyl compounds is also attractive because it allows the skeleton to be converted after the reaction, and it is being applied to total synthesis. In our survey until 2022, α-bromocarbonyl compounds can be used to perform a full range of reactions necessary for organic synthesis, including multi-component reactions, cross-coupling, substitution, cyclization, rearrangement, stereospecific reactions, asymmetric reactions. α-Bromocarbonyl compounds have created a new trend in tertiary alkylation, which until then had limited reaction patterns in organic synthesis. This review focuses on how α-bromocarbonyl compounds can be used in synthetic organic chemistry.
RESUMEN
Photoelectrochemistry (PEC) is burgeoning as an innovative solution to organic synthesis. However, the current PEC system suffers limited reaction types and unsatisfactory performances. Herein, we employ efficient BiVO4 photoanode with tailored deposition layers for customizing two PEC approaches toward C-N and C-P formation. Notably, our process proceeds under mild reaction conditions, easily available substrates, and ultra-low potentials. Beyond photocatalysis and electrocatalysis, customized PEC offers high efficiency, good functional group tolerance, and substantial applicability for decorating drug molecules, highlighting its promising potential to enrich the synthetic toolbox for broader organic chemistry of practical applications.