Exploring the molecular binding mechanism of 6-fluoro, 4-hydroxy, 2- methyl quinoline with TiO2 nanoparticles: A spectroscopic, thermodynamic, and insights into the solvatochromic effect.

This study investigates the interaction between titanium oxide nanoparticles (TiO2 NPs) and the heterocyclic fluorophore 6-fluoro,4-hydroxy,2-methylquinoline (6-FHMQ), aiming to understand fluorescence quenching mechanisms and thermodynamic characteristics. Spectroscopic techniques including spectrofluorometry (FL) and spectrophotometry (UV-Vis) were used, with a lifetime decay (τ) of 0.18 ns for 6-FHMQ measured using time correlated single photon counting (TCSPC). The interaction between 6-FHMQ and TiO2 NPs revealed a mix of static and dynamic fluorescence quenching mechanisms, with increasing quenching constants (Ksv) and a higher bimolecular quenching rate constant (Kq). The dynamic nature was highlighted by a temperature-dependent increase in binding sites from 1 to ~ 2. Spontaneous complexation was affirmed by negative change in free energy (ΔG), with negative change in enthalpy (ΔH) and a positive change in entropy (ΔS) values indicating favorable electrostatic and ionic interactions. The impact of varying TiO2 NP concentrations on 6-FHMQ absorption was analyzed using the Benesi-Hildbrand equation, with a quantum yield of 0.61 determined. By forster resonance energy transfer (FRET) theory, the proximity between 6-FHMQ and TiO2 NPs was found to be less than 70 Å. Ground and excited state dipole moments of 6-FHMQ in different solvents were calculated to demonstrate solvent sensing ability and charge transfer properties. Ultimately, this study serves as a testament to the power of scientific innovation in the realms of drug delivery and tissue engineering.

Portable on-off visual-mode detection using intrinsic fluorescent zinc-based metal-organic framework for detection of diclofenac in pharmaceutical tablets.

On-site, robust, and quantitative detection of diclofenac (DCF) is highly significant in bioanalysis and quality control. Fluorescence-based metal-organic frameworks (MOFs) play a pivotal role in biochemical sensing, offering a versatile platform for detecting various biomolecules. However, conventional fluorescent MOF sensors often rely on lanthanide metals, which can pose challenges in terms of cost, accessibility, and environmental impact. Herein, an intrinsic blue fluorescent zinc-based metal-organic framework (FMOF-5) was prepared free from lanthanide metals. Coordination-induced emission as an effective strategy was followed wherein a non-fluorescent ligand is converted to a fluorescent one after insertion in a framework. Conventional fluorometry and smartphone-assisted visual methods were employed for the detection of DCF. The fluorescence emission of the FMOF-5 was effectively quenched upon the addition of the DCF, endowing it an "off" condition, which permits the construction of a calibration curve with a wide linear range of 30-670 µM and a detection limit of about 4.1 µM. Other analytical figures of merit, such as linearity, sensitivity, selectivity, accuracy, and precision were studied and calculated. Furthermore, the proposed sensor was successfully applied to quantify DCF in pharmaceutical tablets with reliable recovery and precision. Importantly, the elimination of lanthanide metals from the fluorescence detection system enhances its practicality and sustainability, making it a promising alternative for DCF detection in pharmaceutical analysis applications.

Cu(II) detection by a fluorometric probe based on thiazoline-amidoquinoline derivative and its application to water and food samples.

Two novel fluorescent probes for Cu2+ detection have been developed based on thiazoline-quinoline conjugates bearing a 4-ethynyl-N,N-dimethylaniline unit (QT1 and QT2). QT2 exhibits instantaneous fluorescence quenching of Cu2+ with an emissive change from bright orange to arctic blue under UV light irradiation (365 nm). The plots of I0/I against Cu2+ concentrations show a good linear relationship that ranges from 0 to 50 µM with a coefficient of determination (R2) = 0.9906 and a limit of detection (LOD) of 76 nM, which is considered low (4.84 ppb). A 1:1 complexation between QT2 and Cu2+ was confirmed by UV-Vis titration, ESI-MS, and SC-XRD. The QT2·Cu2+ complex was dissociated by the addition of EDTA. The fluorescence quenching mechanism involves the ligand-to-metal charge transfer (LMCT) of a paramagnetic Cu2+ complex. The QT2 probe on a paper-based strip was used to determine the amount of Cu2+ in water and food samples (shiitake mushrooms and oysters).

A selective bis-thiophene chalcone-based spectrofluorimetric sensor for Fe3.

A highly selective bis thiophene-based chalcone as a chemosensor for detecting Fe3+ metal ions in DMF: H2O (9:1). This sensor was selective toward ferric ions over other metal ions with a detection limit in micromolar range.

Enhancement of vitamin B stability with the protection of whey protein and their interaction mechanisms.

Vitamin B is easily degraded by light and heat during storage, which results in nutritional loss of food. Whey protein is expected to protect vitamin B by forming complexes through secondary bonds. The properties of the complexes and protective effects of whey protein on vitamins B1, B2, B3 and B6 were characterized. The percentage losses of vitamin B were decreased by more than 60% with the protection of whey protein. FTIR, fluorescence spectroscopy, thermodynamic analysis and molecular docking were used to investigate the binding interaction between vitamin B and whey protein. Vitamin B quenched the intrinsic fluorescence of whey protein, mainly with a static nature (Kq > 2.0 × 1010 L/(mol·s)). The interactions between whey protein and vitamin B were mostly mediated by hydrogen bonds and van der Waals forces, as demonstrated by the thermodynamic parameters and molecular docking.

The molecular determinants of calcium ATPase inhibition by curcuminoids.

The natural product curcumin and some of its analogs are known inhibitors of the transmembrane enzyme sarco/endoplasmic reticulum calcium ATPase (SERCA). Despite their widespread use, the curcuminoids' binding site in SERCA and their relevant interactions with the enzyme remain elusive. This lack of knowledge has prevented the development of curcuminoids into valuable experimental tools or into agents of therapeutic value. We used the crystal structures of SERCA in its E1 conformation in conjunction with computational tools such as docking and surface screens to determine the most likely curcumin binding site, along with key enzyme/inhibitor interactions. Additionally, we determined the inhibitory potencies and binding affinities for a small set of curcumin analogs. The predicted curcumin binding site is a narrow cleft in the transmembrane section of SERCA, close to the transmembrane/cytosol interface. In addition to pronounced complementarity in shape and hydrophobicity profiles between curcumin and the binding pocket, several hydrogen bonds were observed that were spread over the entire curcumin scaffold, involving residues on several transmembrane helices. Docking-predicted interactions were compatible with experimental observations for inhibitory potencies and binding affinities. Based on these findings, we propose an inhibition mechanism that assumes that the presence of a curcuminoid in the binding site arrests the catalytic cycle of SERCA by preventing it from converting from the E1 to the E2 conformation. This blockage of conformational change is accomplished by a combination of steric hinderance and hydrogen-bond-based cross-linking of transmembrane helices that require flexibility throughout the catalytic cycle.

Quenching and enhancement mechanisms of a novel Cd-based coordination polymer as a multiresponsive fluorescent sensor for nitrobenzene and aniline.

BACKGROUND: Nitroaromatic compounds are inherently hazardous and explosive, so convenient and rapid detection strategies are needed for the sake of human health and the environment. There is an urgent demand for chemical sensing materials that offer high sensitivity, operational simplicity, and recognizability to effectively monitor nitroaromatic residues in industrial wastewater. Despite its importance, the mechanisms underlying fluorescence quenching or enhancement in fluorescent sensing materials have not been extensively researched. The design and synthesis of multiresponsive fluorescent sensing materials have been a great challenge until now. RESULTS: In this study, a one-dimensional Cd-based fluorescent porous coordination polymer (Cd-CIP-1) was synthesized using 5-(4-cyanobenzyl)isophthalic acid (5-H2CIP) and 4,4'-bis(1-imidazolyl)biphenyl (4,4'-bimp) and used for the selective detection of nitrobenzene in aqueous solution by fluorescence quenching, with a limit of detection of 1.38 × 10-8 mol L-1. The presence of aniline in the Cd-CIP-1 solution leads to the enhancement of fluorescence property. Density functional theory and time-dependent density functional theory calculations were carried out to elucidate the mechanisms of the fluorescence changes. This study revealed that the specific pore size of Cd-CIP-1 facilitates analyte screening and enhances host-guest electron coupling. Furthermore, π-π interactions and hydrogen bond between Cd-CIP-1 and the analytes result in intermolecular orbital overlap and thereby boosting electron transfer efficiency. The different electron flow directions in NB@Cd-CIP-1 and ANI@Cd-CIP-1 lead to fluorescence quenching and enhancement. SIGNIFICANCE AND NOVELTY: The multiresponsive coordination polymer (Cd-CIP-1) can selectively detect nitrobenzene and recognize aniline in aqueous solutions. The mechanism of fluorescence quenching and enhancement has been thoroughly elucidated through a combination of density functional theory and experimental approaches. This study presents a promising strategy for the practical implementation of a multiresponsive fluorescent chemical sensor.

Fluorescence Quenching Effect of a Highly Active Nitroxyl Radical on 7-amino-4-methylcoumarin and Glutathione Sensing.

Nitroxyl radical compounds, such as 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO), are stable radical compounds with a variety of unique characteristics, including fluorescence quenching. In this study, we investigated the fluorescence quenching effect of nortropine N-oxyl (NNO), which is a highly active nitroxyl radical that is more active than TEMPO in oxidation catalysis. The fluorescence intensity of 7-amino-4-methylcoumarin (AMC) was quenched by NNO and TEMPO to 5% and 95% of the initial fluorescence intensity, respectively, indicating highly efficient quenching by NNO. In addition, we used this reaction to measure glutathione concentration. The quenching effect of NNO was abrogated by the chemical reaction with glutathione, resulting in restoration of AMC fluorescence. This response was observed at glutathione concentrations from 10 µM to 1 mM, and good calibration curves were obtained from 10 to 250 µM.

Fluorescent MnO2@DEHP Nanoprobe for Rapid and Selective Detection of Fe(III) ions.

Particle extraction via the liquid-liquid interface (PELLI) method has been utilized to produce Di-(2-ethylhexyl) phosphate (DEHP) coated MnO2 fluorescent nanoprobe denoted as MnO2@DEHP for the selective detection of Fe3+ ions. The synthesized MnO2@DEHP nanoprobe was characterized by various instrumental techniques such as FT-IR, PXRD, TEM, EDAX, HRTEM, DLS, and XPS. Since the high concentration of Fe3+ in waste water leads to water pollution, which in turn affects the ecosystem, and causes severe health hazards. Therefore, accurate detection of Fe3+ ions in the aqueous systems is essential as they are involved in various chemical and biological processes in living things. Here, the synthesized MnO2@DEHP nanoprobe selectively detects Fe3+ ions in the presence of various metal ions in an aqueous media by fluorescence quenching (turn-off) mechanism. The limit of detection (LOD) of MnO2@DEHP nanoprobe for Fe3+ was found to be 0.49 µM. The test-strip method and real water sample analysis were also used to demonstrate the viability of MnO2@DEHP as a fluorescent nanoprobe to detect Fe3+ ions visually and in environment monitoring applications.

Exploitation of erythrosine B as a fluorometric marker for lurasidone determination through electrostatic attraction; application to content uniformity test.

A recently developed antipsychotic drug, lurasidone, was determined using a simple, sensitive, and eco-friendly spectrofluorimetric approach. The suggested approach was based on the quantifiable quenching impact of lurasidone on the inherent fluorescence of erythrosine B in an acidic environment employing a Teorell-Stenhagen buffer (pH 4). Following excitation at 530 nm, the quenching of erythrosine B fluorescence was monitored at 552 nm. The system variables were systematically optimized to enhance the formation of the lurasidone-erythrosine B ion pair for analytical purposes. A linear calibration graph was built in the range of 20-600 ng mL-1 with 0.9998 as a coefficient of correlation. The quantitation and detection limits were 13.5 and 4.5 ng/mL, respectively. The analytical validity of the designed approach was assessed with respect to International Council on Harmonization (ICH) guiding principles. The proposed methodology was employed with high recoveries for assessing lurasidone in bulk powder and its therapeutic tablet dosage form. Additionally, the uniformity of tablet formulations was tested using the developed approach. Finally, the established approach was assessed for its greenness using various tools.

Sensitive and rapid determination of tetracycline antibiotic by carrot juice-derived carbon dots as a fluorescent probe.

The antibiotic tetracycline can be efficiently used as medicine for the deterrence of bacterial infections in humans, animals, and plants. However, the unprecedented use of tetracycline is of great concern owing to its low biodegradability, extensive usage, and adverse impacts on the environment and water quality. In this study, a sensitive spectrofluorometric method was proposed for the direct determination of tetracycline, based on biocompatible fluorescent carbon dots (CDs). The synthesis of CDs was performed by adopting a green hydrothermal procedure from carrot juice without requiring surface passivation or outflowing any environmentally hazardous waste. X-ray diffraction analysis and transmission electron microscopy revealed amorphous spherical-shaped CDs that exhibited blue emission under blue illumination. The fabricated fluorescent probe directly detected tetracycline in the concentration range of 4.00 × 10-6 to 1.55 × 10-5 mol L-1 with an LOD of 1.33 × 10-6 mol L-1. The performance of the probe was assessed in a tap water sample, with recovery values between 80.70 and 103.60%. The method's greenness was evaluated using the Analytical Green metric approach (AGREE) and confirmed to be within the green range. The developed method is facile, rapid, cost-effective, and offers a wide linear range and satisfactory selectivity, making it potentially suitable for determining tetracycline in water applications.

Interaction of plant phenol vanillin with human hemoglobin: A spectroscopic and molecular docking study.

Vanillin is a phenolic aldehyde widely used as a flavouring agent in the food industry. Vanillin has many health benefits and has gained attention in pharmacological industries also, due to its antioxidant properties and non-toxic nature. The interaction of vanillin with human hemoglobin (hHb), an abundant tetrameric heme protein, was investigated by several spectroscopic techniques and molecular modeling methods. UV-visible spectra showed that the binding of vanillin to hHb induces structural changes due to alterations in the micro-environment of hHb. Vanillin quenches the intrinsic fluorescence of hHb by the dynamic mechanism, which was confirmed by both temperature dependent and time resolved fluorescence studies. Vanillin binds spontaneously to hHb at a single site and the binding is stabilized by hydrogen bonds and hydrophobic interactions. The circular dichroism spectra showed that the binding of vanillin altered the secondary structure of hHb due to change in its alpha-helical content. Molecular docking identified the amino acids of hHb involved in binding to vanillin and also that the free energy change of the binding reaction is -5.5 kcal/mol. Thus, our results indicate that vanillin binds spontaneously to hHb at a single site and alters its secondary structure. This will help in understanding the potential use of vanillin and related antioxidants as therapeutic agents in various hematological disorders.

Structural characteristics of cell wall pectic polysaccharides from wampee and their decreased binding with pectinase by wampee polyphenol.

To investigate the structural characteristics of cell wall pectic polysaccharides from wampee, water soluble pectin (WSP), chelator-soluble pectin (CSP) and sodium carbonate-soluble pectin (SSP) were purified. And the inhibitory effects of wampee polyphenol (WPP) on pectinase when these cell wall pectic polysaccharides were used as substrates were also explored. Purified WSP (namely PWSP) had the lowest molecular weight (8.47 × 105 Da) and the highest GalA content (33.43%). While purified CSP (called PCSP) and SSP contained more abundant rhamnogalacturonan I side chains. All of them were low-methoxy pectin (DE < 50%). Enzyme activity and kinetics analysis showed that the inhibition of pectinase by wampee polyphenol was reversible and mixed type. When SSP was used as the substrate, WPP had the strongest inhibition (IC50 = 1.96 ± 0.06 mg/mL) on pectinase. Fluorescence quenching results indicated that WPP inhibited enzyme activity by interacting with substrates and enzymes. Therefore, WPP has the application potential in controlling softening of fruits and vegetables.

Detection and adsorption of florfenicol in milk using bifunctional carbon dot-doped molecularly imprinted polymers.

Detection of florfenicol (FF) residues in animal-derived foods, as one of the most widely used antibiotics, is critically important to food safety. The fluorescent molecularly imprinted polymer (MIP) was synthesized by surface-initiated atom transfer radical polymerization technique with poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) microspheres, 4-vinylpyridine, ethylene glycol dimethacrylate, and FF as the matrix, functional monomer, crosslinker, and template molecule, respectively. Meanwhile, N-S co-doped carbon dot (CD) was synthesized with triammonium citrate and thiourea as precursors under microwave irradiation at 400 W for 2.5 min and then integrated into FF-MIP to obtain CD@FF-MIP. For comparison, non-imprinted polymer (NIP) without FF was also prepared. The adsorption capacity of CD@FF-MIP to FF reached 53.1 mg g-1, which was higher than that of FF-MIP (34.7 mg g-1), whereas the adsorption capacity of NIP was only 17.3 mg g-1. The adsorption equilibrium of three materials was reached within 50 min. Particularly, CD@FF-MIP exhibited an excellent fluorescence quenching response to FF in the concentration range of 3-50 µmol L-1. As a result, CD@FF-MIP was successfully utilized to extract FF in milk samples, which were analyzed by high-performance liquid chromatography. The standard recoveries were 95.8%-98.2%, and the relative standard deviation was 1.6%-4.2%. The method showed the advantages of simple operation, high sensitivity, excellent selectivity, and low cost, and also demonstrated a great application prospect in food detection.

Exploring the Binding Mechanism of 5-HT7 Specific Benzoxazolone alkyl Piperazinium Derivatives: A Comprehensive Analysis Using Spectroscopic and Computational Approaches.

Recently, the 5-HT7 receptor has achieved greater attention in research fraternity due to the involvement of neurotransmitter serotonin (5-hydroxytryptamine, 5-HT) in several neurological disorders. Targeting this neuroreceptor, we have synthesized six compounds named as butyl-benzoxazolone substituted piperazinium derivatives (BBOP) derivatives, abbreviated as L1-L6. These compounds have been evaluated for their binding interaction with BSA through photophysical and in-silico approaches. The UV absorption of these compounds with BSA at λmax = 280 nm, showed an optical density (O.D.) in the range of 0.5-0.9, i.e., 21%-53% (L1max = 1.4, L5min = 0.7385) at varied concentrations (17 µM-114 µM). For fluorescence studies, the Ksv value varied inversely with temperature, which confirmed the static mechanism of quenching with L1 showing maximum quenching. The parameters (ΔH, ΔS) obtained from the thermodynamic study for interaction between BSA and L1-L6 were correlated with in-silico (molecular docking) data. The in-silico docking study showed hydrophobic and the Van der Waals forces were the most significant forces. Amino acid residues ARG 217 & TRP 213 (Sudlow Site I) and LYS 116 & GLU 125 (Sudlow Site II) of BSA were primarily involved in H-bonding.Furthermore, the catalytic activity of BSA for hydrolyzingdifferent chemical entities have monitored in the presence of L1-L6 through esterase-like assay with p-NPA as a substrate, to get more insight about the interaction with catalytic residues (LYS 414, LYS 413, and TYR 411) in BSA at site II. These findings showed the potential of these 5-HT7 markers as promising ligands with appropriate drug likeliness characteristics.

Integrated spectroscopic approaches for the facile one pot quantification of olanzapine in pharmaceutical formulation and spiked human plasma.

In this work, the xanthene dye, erythrosine B, was employed as a probe for the determination of olanzapine using two fast and highly simple analytical approaches. The assay was based on the formation of a binary complex between the drug and erythrosine B in a slightly acidic aqueous buffered solution. In the first method, the absorbance of the formed product was monitored at 558 nm. The reaction stoichiometry was investigated, and the stability constant of the formed complex was estimated. The linear range of the method that obeyed Beer's law was in the concentration range of 0.6-8.0 µg/ml. The calculated detection and quantitation limits were 0.2 and 0.6 µg/mL. Upon adding the drug solution to erythrosine B, the native fluorescence of the dye was quenched and monitored at 550 nm after excitation at 528 nm. Thus, the fluorescence quenching was utilized as the quantitative signal in the spectrofluorimetric approach. The extent of quenching in the fluorescence intensity was rectilinear with the drug concentration in a range of 0.1-2.5 µg/ml with a detection limit of 0.032 µg/ml. Both approaches were analytically validated based on the guiding rules of the ICH with acceptable results, and were utilized efficiently in the analysis of olanzapine in commercial tablets containing the cited drug. In addition, owing to its high sensitivity and selectivity, the spectrofluorimetric method was applied for drug analysis in spiked human plasma with satisfactory % recoveries. Finally, the greenness of the methods was confirmed using eco-score scale and Analytical Green Evaluation metrics.

Bacterial exonuclease III expands its enzymatic activities on single-stranded DNA.

Bacterial exonuclease III (ExoIII), widely acknowledged for specifically targeting double-stranded DNA (dsDNA), has been documented as a DNA repair-associated nuclease with apurinic/apyrimidinic (AP)-endonuclease and 3'→5' exonuclease activities. Due to these enzymatic properties, ExoIII has been broadly applied in molecular biosensors. Here, we demonstrate that ExoIII (Escherichia coli) possesses highly active enzymatic activities on ssDNA. By using a range of ssDNA fluorescence-quenching reporters and fluorophore-labeled probes coupled with mass spectrometry analysis, we found ExoIII cleaved the ssDNA at 5'-bond of phosphodiester from 3' to 5' end by both exonuclease and endonuclease activities. Additional point mutation analysis identified the critical residues for the ssDNase action of ExoIII and suggested the activity shared the same active center with the dsDNA-targeted activities of ExoIII. Notably, ExoIII could also digest the dsDNA structures containing 3'-end ssDNA. Considering most ExoIII-assisted molecular biosensors require the involvement of single-stranded DNA (ssDNA) or nucleic acid aptamer containing ssDNA, the activity will lead to low efficiency or false positive outcome. Our study revealed the multi-enzymatic activity and the underlying molecular mechanism of ExoIII on ssDNA, illuminating novel insights for understanding its biological roles in DNA repair and the rational design of ExoIII-ssDNA involved diagnostics.

Insight into the binding characteristics of dissolved organic matter(DOM)and Fe(â ¡)/Mn(â ¡): Based on the spectroscopic and dialysis equilibrium analysis.

Dissolved organic matter (DOM) plays an important role in metal migration and transformation within inland surface waters. In our study, spectroscopic and dialysis equilibrium analysis were combined to characterize the binding properties between DOM and Fe(II)/Mn(II). Four different type of DOM including two commercial DOM: humic acid、fulvic acid, and two natural dissolved organic matter collected from macrophyte-dominant region (MDR) and algae-dominated region (ADR) of Taihu Lake. Steady state/time resolved fluorescence spectroscopy indicated that the fluorescence intensity of DOM was quenched by Fe(II)/Mn(II) through a static quenching process. The adsorption isotherm shows that the adsorption capacity of DOM from Taihu Lake for metal ions is significantly higher than that of commercial humic acid. Simultaneously, the combination of MDR and Fe(II) has the highest adsorption capacity at 110.950 mg/g among all combinations. Furthermore, the Pseudo-second-order kinetic model and Elovich model were found to be superior in describing the adsorption process, with chemical adsorption controlling the rate of the adsorption reaction. The results of this study show that potentially toxic elements (PETs) pollution in eutrophic shallow lakes may become more serious due to the excessive expansion of algae dominant regions and the reduction of macrophyte dominant regions. In addition, risk analysis and assessment of PETs should consider the contribution of metal binding capabilities.

Anti-Quenching NIR-II Excitation Phenylboronic Acid Modified Conjugated Polyelectrolyte for Intracellular Peroxynitrite-Enhanced Chemo-Photothermal Therapy.

Multidrug resistance to clinical chemotherapeutic drugs severely limits antitumor efficacy and patient survival. The integration of chemotherapy with photothermal therapy (PTT) and reactive nitrogen species has become a major strategy to enhance cancer treatment efficacy. Herein, a multifunctional peroxynitrite (ONOO-) nanogenerator (PBT/NO/Pt) for NIR-II fluorescence (NIR-II FL)/NIR-II photoacoustic (NIR-II PA) imaging-guided chemo/NIR-II PTT/ONOO- combination therapy is reported. The multifunction nanogenerator is developed by co-loading a pH-sensitive nitric oxide donor (DETA NONOate) and nicotinamide adenine dinucleotide phosphate oxidases trigger superoxide (O2 •-) generator chemotherapy drug (CDDP) to an NIR-II excitation-conjugated polyelectrolyte (PNC11BA). PNC11BA has non-conjugated alkyl chain segments in the polymer backbone and abundant positively charged phenylboronic acid in its side chains, which support the anti-quenching of NIR-II FL and the integration of DETA NONOate and CDDP into PBT/NO/Pt. In the acidic tumor microenvironment, the coordination bonds between CDDP and PNC11BA are cleaved, releasing CDDP for chemotherapeutic activity. The simultaneous release of nitric oxide (NO) and O2 •- rapidly leads to the in situ generation of the more cytotoxic reactive physiological nitrogen species ONOO-. In vitro and in vivo results prove that PBT/NO/Pt exhibited a markedly ONOO- enhanced chemo-photothermal synergistic therapy for SKOV3/DDP tumor by downregulating the intracellular glutathione and increasing CDDP-DNA adducts.

Thiolated Cyanines Appended to Partially Pegylated Gold Nanoparticles for Fluorescence Quenching of Two-Channel Photothermal Inks.

Following a new approach, we prepared a nanoink with two separate photothermally responsive absorption bands. One is the localized surface plasmon resonance (LSPR) absorption of gold nanoparticles (AuNP, d =17 nm), the second is the absorption band of two cyanine (Cy) dyes, Cy7-C6 or Cy7-C11, grafted to the AuNP surface through thiolated bridges of different lengths: the close proximity to the Au surface induces full quenching of the Cy fluorescence, resulting in thermal relaxation on irradiation. Attempts to full coat AuNP with the lipophilic Cy7-C6 and Cy7-C11 lead to precipitation from aqueous solutions. We thus prepared AuNP with partial pegylation (30, 50, or 70%), using a long chain thiol-terminated PEG bearing a -COOH function. Addition until saturation of either Cy7-C6 or Cy7-C11 to the partially pegylated AuNP gave the AuNP@Cy/PEGX% hybrids (X = 30, 50, 70) that are stable in water and in the water/alcohol mixtures used to prepare the nanoinks. Further overcoating of AuNP@Cy7-C6/PEG50% with PAH (polyallylamine hydrochloride) avoids LSPR hybridization in the dry nanoink printouts, that present two separate bands. When irradiated with laser sources near their absorption maxima, the printouts of the AuNP@Cy7-C6/PEG50%@PAH nanoink respond on two channels, giving different temperature increases depending on the irradiation wavelength.