Encapsulation of Lactiplantibacillus plantarum with casein-gellan gum emulsions to enhance its storage, pasteurization, and gastrointestinal survival.

Probiotics serve a very important role in human health. However, probiotics have poor stability during processing, storage, and gastrointestinal digestion. The gellan gum (GG) is less susceptible to enzymatic degradation and resistant to thermal and acidic environments. This study investigated the effect of casein (CS)-GG emulsions to encapsulate Lactiplantibacillus plantarum CICC 6002 (L. plantarum CICC 6002) on its storage stability, thermal stability, and gastrointestinal digestion. L. plantarum CICC 6002 was suspended in palm oil and emulsions were prepared using CS or CS-GG complexes. We found the CS-GG emulsions improved the viability of L. plantarum CICC 6002 after storage, pasteurization, and digestion compared to the CS emulsions. In addition, we investigated the influence of the gellan gum concentration on emulsion stability, and the optimal stability was observed in the emulsion prepared by CS-0.8% GG complex. This study provided a new strategy for the protection of probiotics based on CS-GG delivery system.

Enhanced mucoadhesive properties of ionically cross-linked thiolated gellan gum films.

Localized oral drug delivery offers several advantages for treating various disease conditions. However, drug retention at the disease site within the oral cavity is indeed a significant challenge due to the dynamic oral environment. The present study aimed to develop a mucoadhesive inner layer for a three-layer mucoadhesive bandage suitable for localized oral drug delivery. using gellan gum (GG) biopolymer. Gellan gum (GG) was modified using L-cysteine moieties via carbodiimide chemistry. Subsequently, gellan gum solution at different extents of thiolation was ionically cross-linked using aluminum ammonium sulfate. Thiolated gellan gum films of uniform thickness were prepared using a solvent casting method. The thickness of bare gellan gum film was 0.035 ± 0.0043 mm, whereas the thiolated gellan gum films, GG 1S and GG 2S showed a thickness of 0.0191 ± 0.0011 mm and 0.0188 ± 0.0004 mm respectively. A high work of adhesion was noted for thiolated gellan gum (GG 2S) with a value of 10 N.mm while using porcine buccal mucosa. An average tensile strength of 48.2 ± 2.46 MPa was measured for thiolated gellan gum films irrespective of the extent of thiolation. The high work of adhesion, favorable cytocompatibility, desirable mechanical properties, and free swell capacity in saline confirmed the suitability of ionically cross-linked thiolated gellan gum films as an inner mucoadhesive layer for the mucoadhesive bandage.

Gellan gum-cellulose hydrogel incorporating with graphene oxide and magnetic nanoparticles as a novel nanocatalyst for the synthesis of dihydropyrano derivatives.

In this project, a highly efficient catalyst with a remarkable yield of over 97 % was developed for the synthesis of dihydropyrano[2,3-c] pyrazole derivatives. A Gellan Gum-Cellulose hydrogel was prepared using Glutaraldehyde as the cross-linker, which served as the matrix for further modifications. Synthesized graphene oxide was then incorporated into the hydrogel structure using a modified Hummers method, enhancing the catalytic properties of the material. To facilitate the separation and recovery of the catalyst, the resulting structure was magnetized, leading to the formation of a magnetic nanocomposite. Even after undergoing four cycles of catalyst recovery, the GG-Cell hydrogel/GO/Fe3O4 nanocomposite retained 90 % of its initial catalytic activity, highlighting its robustness and stability. Detailed physical and chemical analyses were conducted to gain a comprehensive understanding of the synthesized magnetic catalyst, contributing to the advancement of the field of catalysis and holding great potential for various applications in organic synthesis and related fields.

Effects of fermentation conditions on molecular weight, production, and physicochemical properties of gellan gum.

Gellan gum has been widely used in many industries due to its excellent physical properties. In this study, the effects of different fermentation conditions on molecular weight and production of gellan gum were analyzed, and the optimized fermentation conditions for a high molecular weight gellan gum (H-GG: 6.42 × 105 Da) were obtained, which increased the molecular weight and yield of gellan gum by 201.4 % and 44.9 % respectively. Fourier transform infrared spectroscopy (FT-IR) and x-ray diffraction (XRD) analysis indicated that H-GG has similar characteristic absorption and semi-crystalline structures with the initial gellan gum (I-GG), and it was composed of glucose, rhamnose, and glucuronic acid showing no obvious changes in the molecular structure. Scanning electron microscope (SEM) observation revealed that the filaments of H-GG were slender, longer, and looser with larger pores. Importantly, gel properties analysis showed that the gel strength, viscoelasticity, and water-holding capacity of H-GG were better than those of I-GG, and the rheological results revealed that the H-GG is a pseudoplastic fluid with higher apparent viscosity and stable viscoelasticity at 20-70 °C. Therefore, the molecular weight and yield of gellan gum are significantly affected by fermentation conditions, and the obtained H-GG demonstrates improved gel and rheological properties.

Dimethyl Fumarate-Loaded Gellan Gum Hydrogels Can Reduce In Vitro Chemokine Expression in Oral Cells.

Dimethyl fumarate (DMF), originally proposed to treat multiple sclerosis, is considered to have a spectrum of anti-inflammatory effects that effectively control periodontitis, mainly when applied with a hydrogel delivery system. Chemokine expression by gingival fibroblasts is a significant driver of periodontitis; thus, hydrogel-based strategies to deliver DMF, which in turn dampen chemokine expression, are of potential clinical relevance. To test this approach, we have established a bioassay where chemokine expression is induced by exposing gingival fibroblast to IL1ß and TNFα, or with saliva. We show herein that DMF effectively reduced the expression of CXCL8, CXCL1, CXCL2, and CCL2-and lowered the phosphorylation of ERK and JNK-without affecting cell viability. This observation was confirmed by immunoassays with CXCL8. Consistently, the forced chemokine expression in HSC2 oral squamous epithelial cells was greatly diminished by DMF. To implement our hydrogel-based delivery system, gingival fibroblasts were cocultured with gellan gum hydrogels enriched for DMF. In support of our strategy, DMF-enriched gellan gum hydrogels significantly reduced the forced chemokine expression in gingival fibroblasts. Our data suggest that DMF exerts its anti-inflammatory activity in periodontal cells when released from gellan gum hydrogels, suggesting a potential clinical relevance to control overshooting chemokine expression under chronic inflammatory conditions.

Gelation of gellan induced by trivalent cations and coexisting trivalent with monovalent cations studied by rheological and DSC measurements.

The effect of trivalent cation Fe3+ on the gelation process of a sodium salt form of gellan (DG, deacylated gellan gum) was investigated by rheology and DSC studies. On addition of a fairly low concentration of Fe3+ (1 mM), both the complex modulus (G*) of a 1.0 % DG solution in gel state and the sol-gel transition temperature (Tgel) slightly decreased. At higher Fe3+ concentrations (2 and 3 mM), however, a slight increase in the G* and Tgel was observed. In the coexisting monovalent cation (K+) solutions, addition of Fe3+ always improved the G* in gel state and the Tgel in a concentration-dependent manner. Moreover, for all Fe3+ DG solutions, the ordered structure formation temperature (Torder) was always lower than Tgel and increased with increasing Fe3+ concentration. This finding indicates that the network formation in the DG solutions should occur in advance of the ordered structure formation of the DG chains and that the presence of Fe3+ unfavorably affected the conformational transition of DG. In coexisting cation solution, the presence of K+ ion made a favorable contribution to the binding of Fe3+ to the disordered DG chains and to the subsequent ordered structure formation of the DG chains.

Enhanced water and oxygen barrier properties of deacetylated konjac glucomannan/high acyl gellan gum water gradient film for improved frozen fish fillet preservation.

The use of konjac glucomannan (KGM)/high acyl gellan gum (HAGG) edible film with single-sided unsaturated water swelling, designated as a water gradient film (WGF), has been shown to effectively enhance the preservation quality of frozen fish fillets. This study investigates the potential of using partially deacetylated konjac glucomannan (DKGM)/HAGG WGFs to enhance the preservation of frozen fish fillets. The partial deacetylation of KGM improved the water vapour and oxygen barrier properties of the frozen KGM/HAGG WGF, which exhibited a combination of film and ice structural characteristics. This improvement is attributed to strengthened interactions between DKGM and HAGG, resulting in a more structured film matrix that exhibited reduced permeability to both water vapour and oxygen. Furthermore, the improved interactions between DKGM and HAGG led to the formation of smaller polysaccharide ice crystals, which in turn increased the oxygen diffusion path along the intercrystalline boundaries, further decreasing oxygen permeability. Over a 90-day freezing period, the DKGM/HAGG WGF significantly outperformed traditional KGM/HAGG WGF, ice glazing, and polyethylene film packaging in preserving the quality of frozen fish fillets. This study provides a promising strategy for the design and development of DKGM-based WGFs for frozen fish fillet preservation applications.

Mucoadhesive in situ nasal gel of amoxicillin trihydrate for improved local delivery: Ex vivo mucosal permeation and retention studies.

Orally administered amoxicillin is recommended as the first-line treatment of acute bacterial rhinosinusitis (ABR) and given in a high-dose regimen. However, the risk of various systemic adverse reactions and low oral bioavailability are unbearable, increasing the threat of antibiotic resistance. Therefore, nasal delivery of amoxicillin can be a potential approach for effectively treating ABR locally, as well as overcoming those drawbacks. In a way to guarantee the effectiveness for local therapy in nasal cavity, the permeation and retention properties are of significant importance considerations. Accordingly, the present work aimed to investigate the characteristics with respect to the nasal applicability of the in situ gelling amoxicillin trihydrate (AMT) and further evaluate its permeability and retention properties through human nasal mucosa. The lyophilized formulations were characterized utilizing the Differential Scanning Calorimetry (DSC) and X-ray Powder Diffraction (XRPD), and also evaluated for its polarity, reconstitution time, droplet size distribution, mucoadhesive properties, and ex vivo permeability and retention studies. The results confirmed that the in situ gelling AMT formulations possess adequate mucoadhesive behavior, especially the formulation containing 0.3 % of gellan gum. Substantially, the in situ gelling AMT formulations were able to retain the drug on the surface of nasal mucosa instead of permeating across the membrane; thus, suitable for treating nasal infections locally. Altogether, the in situ gelling systems demonstrates promising abilities as a delivery platform to enhance local application of AMT within the nasal cavity.

Recent advances in gellan gum production and modification for enhanced applicability in food printing and bioactive delivery applications.

The importance of Gellan gum has been increasing gradually and its unique characteristics are suitable for various advanced food technologies. This review outlines recent developments in gellan gum production, modification, and newer applications focusing on food printing and bioactive delivery applications, in the last three years. The yield and production condition of gellan gum is a major factor that affects the cost and its applications. Moreover, modified Gellan gum has been shown to have superior characteristics and functionality as compared to native one. The viscosifying, thermosensitive, gelling etc. characteristics of gellan gum makes it an crucial ingredient in case of preparation of 3D printing ink. Further, gellan gum is also found to be important wall material in case of bioactive delivery application through encapsulation. Optimized methods of production, sustainable feedstock, and stress conditions are critical for the desired functionality and yield of the Gellan gum.

Synthesis and characterization of Gellan gum-based hydrogels for the delivery of anticancer drug etoposide.

Present research work reports the synthesis of Gellan gum (Gg) and methacrylic acid (MA) based grafted hydrogels (Gg-cl-poly(MA)) crosslinked using N, N'- methylene-bis-acrylamide (MBA) and the evaluation of their efficiency to be used as a sustained drug delivery carrier for anticancer drug i.e., etoposide. Various characterization techniques like Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) confirmed the grafting of Gg with MA and the formation of crosslinked Gg-cl-poly(MA) hydrogel polymer. The synthesized hydrogel showed pH-dependent swelling properties and exhibited a maximum swelling capacity of 867 % under optimized environmental conditions. The Gg-cl-poly(MA) was biocompatible and non-cytotoxic, which was confirmed by the hemolytic and cytotoxic tests. The release dynamics of etoposide from the Gg-cl-poly(MA) polymer matrix was checked under specific physiological conditions. Drug release was found to be significantly higher in the acidic medium, followed by the neutral and alkaline medium. This clearly indicated that etoposide drug release through synthesized hydrogel was stomach-specific and it is effective for the treatment of stomach cancer. The release mechanism of the etoposide drug was a Fickian-type diffusion mechanism in the acidic medium and a non-Fickian-type diffusion mechanism in the neutral and alkaline medium. The release profile of the etoposide was best fitted to the first-order rate model. The results showed that the synthesized hydrogel (i.e., Gg-cl-poly(MA)) was biocompatible, non-toxic, and could be used for the treatment of stomach cancer.

In situ forming hydrogels based on modified gellan gum/chitosan for ocular drug delivery of timolol maleate.

In situ forming hydrogels are suitable candidates for increasing drug residence time in ocular drug delivery. In this study, gellan gum (GG) was oxidized to form aldehyde groups and in situ gelling hydrogels were synthesized based on a Schiff-base reaction between oxidized GG (OGG) and chitosan (CS) in the presence of ß-glycerophosphate. The effect of OGG and CS concentration on the physical and chemical properties of the resulting hydrogels was investigated. The FT-IR spectroscopy confirmed the chemical modification of OGG as well as the functional groups of the prepared hydrogels. The scanning electron microscope (SEM) revealed the highly porous structure of hydrogels. The obtained hydrogels indicated a high swelling degree and degradability. Also, the rheological studies demonstrated self-healing behavior, shear thinning, thixotropy, and mucoadhesion properties for the developed hydrogels. The results of in vitro and ex vivo studies showed that the timolol-loaded hydrogel with a higher amount of OGG has a higher release rate. Moreover, the MTT cytotoxicity test on bone marrow mesenchymal stem cells (BMSCs) confirmed that developed hydrogels are not toxic. The obtained results revealed that the developed hydrogels can be a desirable choice for the ocular drug delivery of timolol in the treatment of glaucoma.

Food-based biomaterials: pH-responsive alginate/gellan gum/carboxymethyl cellulose hydrogel beads for lactoferrin delivery.

The present study utilizes a combination of sodium alginate (Alg), gellan gum (GG), and sodium carboxymethyl cellulose (CMC) to fabricate a ternary composite hydrogel system to encapsulate and release lactoferrin (LF). Rheological properties as well as extensive microscopy and spectroscopy characterization are performed on these materials demonstrating that the physical properties of the resultant hydrogels, such as particle size, water content, gray value, and shrinkage rate were related to the concentration of Alg. In addition, most of these hydrogels were found to have reticulated shells and inner laminar structures assembled based on hydrogen bonding and electrostatic forces. Furthermore, the encapsulation efficiency of LF in hydrogels ranged from 78.3 ± 0.3 to 83.5 ± 0.2 %. Notably, a small amount of encapsulated LF was released from the hydrogel beads in an acid environment (up to 2.2 ± 0.3 % in 2 h), while a controlled release manner was found to take place in an alkaline environment. This phenomenon indicated the potential of these hydrogels as promising matrices for bioactive compound loading and adsorption. The release mechanism varied from Alg concentration suggesting the tunable and versatile properties of this ternary composite hydrogel system. Our findings identify the potential of Alg-GG-CMC hydrogel as a delivery system suitable for various applications in the food industry.

Injectable Tissue Adhesive Microgel Composite Containing Antifibrotic Drug for Vocal Fold Scarring.

Vocal fold (VF) scarring, a complex problem in laryngology, results from injury and inflammation of the layered architecture of the VFs. The resultant voice hoarseness, for which successful therapeutic options are currently limited, affects the patient's quality of life. A promising strategy to reverse this disorder is the use of antifibrotic drugs. The present study proposes a novel microbead-embedded injectable hydrogel that can sustain the release of the anti-fibrotic drug pirfenidone (PFD) for vocal fold scarring. Microbeads were developed using sodium alginate and gelatin, which were further embedded into a biomimetic and tissue adhesive gellan gum (GG) hydrogel. The microbead-embedded hydrogel exhibited improved injectability, viscoelasticity, tissue adhesiveness, degradability, and swelling compared to the hydrogel without beads. Additionally, the bead-embedded hydrogel could sustain the release of the PFD for a week. In vitro studies showed that the drug-loaded hydrogel could reduce the migration and proliferation of fibroblast cells in a dose-dependent manner. In summary, this study demonstrates the potential of a PFD-loaded injectable hydrogel with enhanced viscoelastic and tissue-adhesive properties for vocal fold scarring applications.

A polysaccharide gel made of gellan gum improves oocyte maturation and embryonic development in pigs.

Gellan gum (GG) is a soft, tractable,　and natural polysaccharide substrate used for cell incubation. In this study, we examined the effects of GG on porcine oocyte maturation. Cumulus cells and oocyte complexes (COCs) were collected from slaughterhouse-derived porcine ovaries and cultured on plastic plates containing 0.05% or 0.1% GG gels. The 0.1% GG gel improved the maturation rate and quality of blastocysts, as determined by the total cell number and the rate of abnormally condensed nuclei. GG gels have antioxidant abilities and oocytes cultured on GG gels (0.05% and 0.1%) have reduced reactive oxygen species (ROS) content. Furthermore, GG gels (0.05% and 0.1%) increased F-actin formation, whereas treatment of oocytes with H2O2 reduced F-actin levels. GG gels increased the ATP content in oocytes but did not affect the mitochondrial DNA copy number or mitochondrial membrane potential. In addition, the medium cultured on 0.05% GG increased the glucose consumption of COCs. In conclusion, GG gel reduced ROS content, increased energy content, and improved subsequent embryonic development in pigs.

Preparation and in vivo and ex vivo studies of sirolimus nano-in-situ gel ophthalmic formulation.

Sirolimus (SR) is a macrolide with antifungal and antitumor immunosuppressant properties, classified as a selective inhibitor of mammalian target of rapamycin (mTOR). In this study, an ionic in situ gel of SR (SR-SUS-ISG) was formulated using gellan gum, exhibiting stability regardless of temperature and pH variations, causing minimal irritation. Harnessing the physiological conditions of the eye, SR-SUS-ISG underwent gelation upon contact with ions, increasing drug viscosity and prolonging retention on the ocular surface. Concurrently, SR-SUS-ISG displayed favorable shear dilution properties, reducing viscosity at ambient temperature, enhancing fluidity, and facilitating convenient packaging and transport. Biocompatibility assessments on both human corneal epithelial cells and rabbit eyes demonstrated that SR-SUS-ISG could well be tolerated. Pharmacokinetic investigations in rabbit ocular aqueous humor revealed sustained release, improved corneal penetration, and enhanced bioavailability. Additionally, in a rat corneal alkali burn model, SR-SUS-ISG exhibited inhibitory effects on corneal neovascularization, associated with decreased levels of the inflammatory factors VEGF and MMPs. These findings suggested that SR-SUS-ISG held promise as an effective ocular drug delivery system.

Exploring gellan gum-based hydrogels for regenerating human embryonic stem cells in age-related macular degeneration therapy: A literature review.

Age-related macular degeneration (AMD) is a progressive ocular disease marked by the deterioration of retinal photoreceptor cells, leading to central vision decline, predominantly affecting the elderly population worldwide. Current treatment modalities, such as anti-VEGF agents, laser therapy, and photodynamic therapy, aim to manage the condition, with emerging strategies like stem cell replacement therapy showing promise. However, challenges like immune rejection and cell survival hinder the efficacy of stem cell interventions. Regenerative medicine faces obstacles in maximizing stem cell potential due to limitations in mimicking the dynamic cues of the extracellular matrix (ECM) crucial for guiding stem cell behaviour. Innovative biomaterials like gellan gum hydrogels offer tailored microenvironments conducive to enhancing stem cell culture efficacy and tissue regeneration. Gellan gum-based hydrogels, renowned for biocompatibility and customizable mechanical properties, provide crucial support for cell viability, differentiation, and controlled release of therapeutic factors, making them an ideal platform for culturing human embryonic stem cells (hESCs). These hydrogels mimic native tissue mechanics, promoting optimal hESC differentiation while minimizing immune responses and facilitating localized delivery. This review explores the potential of Gellan Gum-Based Hydrogels in regenerative AMD therapy, emphasizing their role in enhancing hESC regeneration and addressing current status, treatment limitations, and future directions.

Effectiveness of gellan gum scaffolds loaded with Boswellia serrata extract for in-situ modulation of pro-inflammatory pathways affecting cartilage healing.

In this study, we developed a composite hydrogel based on Gellan gum containing Boswellia serrata extract (BSE). BSE was either incorporated directly or loaded into an MgAl-layered double hydroxide (LDH) clay to create a multifunctional cartilage substitute. This composite was designed to provide anti-inflammatory properties while enhancing chondrogenesis. Additionally, LDH was exploited to facilitate the loading of hydrophobic BSE components and to improve the hydrogel's mechanical properties. A calcination process was also adopted on LDH to increase BSE loading. Physicochemical and mechanical characterizations were performed by spectroscopic (XPS and FTIR), thermogravimetric, rheological, compression test, weight loss and morphological (SEM) investigations. RPLC-ESI-FTMS was employed to investigate the boswellic acids release in simulated synovial fluid. The composites were cytocompatible and capable of supporting the mesenchymal stem cells (hMSC) growth in a 3D-conformation. Loading BSE resulted in the modulation of the pro-inflammatory cascade by down-regulating COX2, PGE2 and IL1ß. Chondrogenesis studies demonstrated an enhanced differentiation, leading to the up-regulation of COL 2 and ACAN. This effect was attributed to the efficacy of BSE in reducing the inflammation through PGE2 down-regulation and IL10 up-regulation. Proteomics studies confirmed gene expression findings by revealing an anti-inflammatory protein signature during chondrogenesis of the cells cultivated onto loaded specimens. Concluding, BSE-loaded composites hold promise as a tool for the in-situ modulation of the inflammatory cascade while preserving cartilage healing.

Nano hydrogel with bacterial nanocellulose and bitter almond oil nanoemulsions for enhanced wound healing: In-vivo and in-vitro characterization.

Biocompatibility, good mechanical properties, infection prevention, and anti-inflammatory are the requirements of an ideal wound dressing for the care and treatment of skin wounds. In this study, the nanohydrogels as wound dressing, were fabricated by bacterial nanocellulose (BNC), polyvinyl alcohol (PVA), and gellan gum. Bitter almond oil nanoemulsion (BAO-NE) was made with ultrasonic force and incorporated into the nanohydrogels in concentrations of 2, 4, and 6 %. The mechanical and physicochemical analyses such as tensile strength (TS), elongation at break (EB), swelling, water vapor transmission rate (WVTR), degradation, FTIR-ATR, and SEM, and anti-inflammatory, antibacterial, etc. properties of the nanohydrogels were investigated. Also, the wound healing ability was evaluated by in-vivo analyses. The molecular analyses of the expression of genes related to collagen production and inflammation were performed. Increasing BAO-NE concentration enhanced anti-inflammatory and antibacterial activities against Gram-negative and Gram-positive bacteria (P < 0.05). The in-vivo study presented the healing role of nanohydrogels in rat wounds. Real-time PCR results confirmed the anti-inflammatory and healing effects of the films at molecular levels. All the results testify to the promising properties of the fabricated nanohydrogels as a potential wound dressing.

Mechanical and biological behavior of double network hydrogels reinforced with alginate versus gellan gum.

Alginate and gellan gum have both been used by researchers as reinforcing networks to create tough and biocompatible polyethylene glycol (PEG) based double network (DN) hydrogels; however, the relative advantages and disadvantages of each approach are not understood. This study directly compares the mechanical and biological properties of polyethylene glycol di-methacrylate (PEGDMA) hybrid DN hydrogels reinforced with either gellan gum or sodium alginate using PEGDMA concentrations from 10 to 20 wt% and reinforcing network concentrations of 1 and 2 wt%. The findings demonstrate that gellan gum reinforcement is more effective at increasing the strength, stiffness, and toughness of PEGDMA DN hydrogels. In contrast, alginate reinforcement yields DN hydrogels with greater stretchability compared to gellan gum reinforced PEGDMA. Furthermore, separate measurements of toughness via unnotched work of rupture testing and notched fracture toughness testing showed a strong correlation of these two properties for a single reinforcing network type, but not across the two types of reinforcing networks. This suggests that additional notched fracture toughness experiments are important for understanding the full mechanical response when comparing different tough DN hydrogel systems. Regarding the biological response, after conjugation of matrix protein to the surface of both materials robust cell attachment and spreading was supported with higher yes associated protein (YAP) nuclear expression observed in populations adhering to the stiffer gellan gum-PEGDMA material. This study provides valuable insights regarding how to design double network hydrogels for specific property requirements, e.g., for use in biomedical devices, as scaffolding for tissue engineering, or in soft robotic applications.

Synergistic potential of gellan gum methacrylate and keratin hydrogel for visceral hemostasis and skin tissue regeneration.

In recent years, the development of biodegradable hydrogels as an alternative over the traditional wound dressing has become increasingly significant. These specific hydrogels are able to offer suitable microenvironments to further aid the process of tissue or organ regeneration. However, application of biodegradable hydrogels in clinical medicine remains uncommon due to most biodegradable hydrogels struggle with achieving satisfactory adhesiveness property, high mechanical support and cell compatibility simultaneously. In order to overcome these constraints and enhance the applicability of biodegradable hydrogels, methods have been employed in this study. By reacting gellan gum with methacrylic anhydride and incorporating a biodegradable protein, keratin, we endowed the hydrogels with high pliability via photo-polymerization chain extension, thereby obtaining a biodegradable hydrogel with exceptional properties. Through a series of in vitro tests, GGMA/keratin hydrogels exhibited great cell compatibility via providing an appropriate environment for cell proliferation. Furthermore, this hydrogel not only exhibits extraordinary adhesive ability on visceral tissues but also extends to scenarios involving skin or organ damage, offering valuable assistance in wound healing. Our design provides a suitable platform for cell proliferation and tissue regeneration, which shows prospects for future medical research and clinical applications.