Priority sources identification and risks assessment of heavy metal(loid)s in agricultural soils of a typical antimony mining watershed.

Heavy metal(loid) (HM) pollution in agricultural soils has become an environmental concern in antimony (Sb) mining areas. However, priority pollution sources identification and deep understanding of environmental risks of HMs face great challenges due to multiple and complex pollution sources coexist. Herein, an integrated approach was conducted to distinguish pollution sources and assess human health risk (HHR) and ecological risk (ER) in a typical Sb mining watershed in Southern China. This approach combines absolute principal component score-multiple linear regression (APCS-MLR) and positive matrix factorization (PMF) models with ER and HHR assessments. Four pollution sources were distinguished for both models, and APCS-MLR model was more accurate and plausible. Predominant HM concentration source was natural source (39.1%), followed by industrial and agricultural activities (23.0%), unknown sources (21.5%) and Sb mining and smelting activities (16.4%). Although natural source contributed the most to HM concentrations, it did not pose a significant ER. Industrial and agricultural activities predominantly contributed to ER, and attention should be paid to Cd and Sb. Sb mining and smelting activities were primary anthropogenic sources of HHR, particularly Sb and As contaminations. Considering ER and HHR assessments, Sb mining and smelting, and industrial and agricultural activities are critical sources, causing serious ecological and health threats. This study showed the advantages of multiple receptor model application in obtaining reliable source identification and providing better source-oriented risk assessments. HM pollution management, such as regulating mining and smelting and implementing soil remediation in polluted agricultural soils, is strongly recommended for protecting ecosystems and humans.

Simultaneous immobilization of multiple heavy metal(loid)s in contaminated water and alkaline soil inoculated Fe/Mn oxidizing bacterium.

Two strains of Fe/Mn oxidizing bacteria tolerant to high concentrations of multiple heavy metal(loid)s and efficient decontamination for them were screened. The surface of the bio-Fe/Mn oxides produced by the oxidation of Fe(II) and Mn(II) by Pseudomonas taiwanensis (marked as P4) and Pseudomonas plecoglossicida (marked as G1) contains rich reactive oxygen functional groups, which play critical roles in the removal efficiency and immobilization of heavy metal(loid)s in co-contamination system. The isolated strains P4 and G1 can grow well in the following environments: pH 5-9, NaCl 0-4%, and temperature 20-30°C. The removal efficiencies of Fe, Pb, As, Zn, Cd, Cu, and Mn are effective after inoculation of the strains P4 and G1 in the simulated water system (the initial concentrations of heavy metal(loid) were 1 mg/L), approximately reaching 96%, 92%, 85%, 67%, 70%, 54% and 15%, respectively. The exchangeable and carbonate bound As, Cd, Pb and Cu are more inclined to convert to the Fe-Mn oxide bound fractions in P4 and G1 treated soil, thereby reducing the phytoavailability and bioaccessible of heavy metal(loid)s. This research provides alternatives method to treat water and soil containing high concentrations of multi-heavy metal(loid)s.

Mobilization of heavy metals from floodplain sediments of the Yellow River during redox fluctuations.

The floodplain of the Yellow River is a typical area characterized by redox fluctuations and heavy metal pollution. However, the mobilization behavior of heavy metals in floodplain sediments during redox fluctuations remains poorly understood. In this study, reductive mobilization of Fe and Mn was observed under reducing environments through reduction and dissolution, leading to the subsequent release of adsorbed As. In contrast, the mobilization of U occurred under oxic conditions, as the oxidative state of U(VI) has higher solubility. Furthermore, insignificant effects on the mobilization of Cd, Cu, Pb, and Hg were noticed during redox fluctuations, indicating higher stability of these heavy metals. Additionally, we demonstrated that carbon sources can play a key role in the mobilization of heavy metals in floodplain sediments, amplifying the reductive mobilization of Fe, Mn, As and the oxidative mobilization of U. Our findings contribute to the understanding of the biogeochemical cycling of heavy metal in floodplain sediments of the Yellow River and the factors that control this cycling.

Cd/Pb behavior during combustion in a coal-fired power plant and their spatiotemporal impacts on soils: New insights from Cd/Pb isotopes.

Coal power plants annually generate quantities of byproducts that release environmentally hazardous heavy metals like Cd and Pb. Understanding the behavior and spatiotemporal impacts on soils of these releases is crucial for pollution control. This study investigated the concentrations and isotope ratios of Cd/Pb in combustion byproducts, depositions and soils collected from a coal-fired power plant or its surrounding area. The pulverized fuel ash (PFA) and desulfurized gypsum (DG) exhibited heavier Cd isotopes with Δ114Cd values of 0.304‰ and 0.269‰, respectively, while bottom ash (BA) showed lighter Cd isotopes (Δ114CdBA-coal = -0.078‰), compared to feed coal. We proposed a two-stage condensation process that governs the distribution of Cd/Pb, including accumulation on PFA and DG within electrostatic precipitators and desulfurization unit, as well as condensation onto fine particles upon release from the stack. Emissions from combustion and large-scale transport make a significant contribution to deposition, while the dispersion of Cd/Pb in deposition is primarily influenced by the prevailing wind patterns. However, the distribution of Cd/Pb in soils not only exhibit predominant wind control but is also potentially influenced by the resuspension of long-term storage byproducts. The power plant significantly contributes to soil in the NW-N-NE directions, even at a considerable distance (66%-79%), demonstrating its pervasive impact on remote regions along these orientations. Additionally, based on the vertical behavior in the profile, we have identified that Cd tends to migrate downward through leaching, while variations in Pb respond to the historical progression of dust removal.

Impact of coking plant to heavy metal characteristics in groundwater of surrounding areas: Spatial distribution, source apportionment and risk assessments.

Coking industry is a potential source of heavy metals (HMs) pollution. However, its impacts to the groundwater of surrounding residential areas have not been well understood. This study investigated the pollution characteristics and health risks of HMs in groundwater nearby a typical coking plant. Nine HMs including Fe, Zn, Mo, As, Cu, Ni, Cr, Pb and Cd were analyzed. The average concentration of total HMs was higher in the nearby area (244.27 µg/L) than that of remote area away the coking plant (89.15 µg/L). The spatial distribution of pollution indices including heavy metal pollution index (HPI), Nemerow index (NI) and contamination degree (CD), all demonstrated higher values at the nearby residential areas, suggesting coking activity could significantly impact the HMs distribution characteristics. Four sources of HMs were identified by Positive Matrix Factorization (PMF) model, which indicated coal washing and coking emission were the dominant sources, accounted for 40.4%, and 31.0%, respectively. Oral ingestion was found to be the dominant exposure pathway with higher exposure dose to children than adults. Hazard quotient (HQ) values were below 1.0, suggesting negligible non-carcinogenic health risks, while potential carcinogenic risks were from Pb and Ni with cancer risk (CR) values > 10-6. Monte Carlo simulation matched well with the calculated results with HMs concentrations to be the most sensitive parameters. This study provides insights into understanding how the industrial coking activities can impact the HMs pollution characteristics in groundwater, thus facilitating the implement of HMs regulation in coking industries.

Ultrasonic humidifier aerosols: Observed high heavy metal enrichment and a new emission control method.

Ultrasonic humidifiers are commonly used in households to maintain indoor humidity and generate a large number of droplets or spray aerosols. However, there have been various health concerns associated with humidifier use, largely due to aerosols generated during operation. Here, we investigated the size distribution, chemical composition, and charged fraction of aerosol particles emitted from commercial ultrasonic humidifiers. Heavy metals in water used for humidifiers were found to be highly enriched in the ultrasonic humidifier aerosols (UHA), with the enrichment factors ranging from 102 to 107. This enrichment may pose health concerns for the building occupants, as UHA concentrations of up to 106 particles/cm3 or 3 mg/m3 were observed. Furthermore, approximately 90% of UHA were observed to be electrically charged, for the first time according to our knowledge. Based on this discovery, we proposed and tested a new method to remove UHA by using a simple electrical field. The designed electrical field in this work can efficiently remove 81.4% of UHA. Therefore, applying this electrical field could be an effective method to significantly reduce the health risks by UHA.

Quantitative detection of heavy metal Cd in vegetable oils: A nondestructive method based on Raman spectroscopy combined with chemometrics.

Heavy metal contaminants in vegetable oils can cause irreversible damage to human health. In this study, the quantitative detection of Cd in vegetable oils was investigated based on Raman spectroscopy combined with chemometric methods. The necessary preprocessing of the Raman signal was performed using baseline calibration and the Savitzky-Golay method. Three variable optimization methods were applied to the preprocessed Raman spectra. Namely, bootstrap soft shrinkage, multiple feature spaces ensemble strategy with least absolute shrinkage and selection operator, and competitive adaptive reweighted sampling (CARS), respectively. Partial least squares regression (PLSR) modeling for the determination of Cd in vegetable oils. The results show that three variable optimization algorithms improved the predictive performance of the model. Among them, the CARS-PLSR model has strong generalization performance and robustness. Its prediction coefficient of determination ( R P 2 $R_{\mathrm{P}}^2$ ) was 0.9995, the root mean square error of prediction was 0.3533 mg/kg, and the relative prediction deviation was 44.3748, respectively. In summary, rapid quantitative analysis of Cd contamination in vegetable oils can be realized based on Raman spectroscopy combined with chemometrics.

Transforming restored heavy metal-contaminated soil into eco-friendly bricks: An insight into heavy metal stabilization and environmental safety.

Materialization is currently the primary method for utilizing restored heavy metal-contaminated soil (RHMCS). However, compared to ordinary building materials, the migration and transformation mechanisms of heavy metals (HMs) while preparing these materials remain unclear. To bridge these gaps, this study investigated the migration and transformation mechanisms of As and Pb during the sintering of RHMCS into bricks. This study is the first to conduct a systematic study from the perspectives of both the inner and outer brick layers on the patterns and mechanisms of HM migration and transformation during the sintering process, along with the safety of product utilization. Approximately 90% of As and 36% of Pb migrated out of the RHMCS, with significant transformations observed after sintering. Adjusting the sintering parameters increased migration at long dwell times and high temperatures. These findings indicate different migration behaviors and transformations of HMs within the brick layers, emphasizing the need for cautious application and potential secondary pollution risks. A potential ecological risk index confirmed the safety of the bricks in accordance with construction material standards. Overall, this study provides crucial insights into safe and effective RHMCS utilization, contributing significantly to environmental remediation and sustainable construction practices.

Interfacial interactions between colloidal polystyrene microplastics and Cu in aqueous solution and saturated porous media: Model fitting and mechanism analysis.

Microplastic (MP) and heavy metal pollution have received much attention. Few researches have been carried out on the influence of the interaction between MPs and heavy metals on their transport in saturated porous media, which concerns their fate. Therefore, the interaction mechanisms between colloidal polystyrene microplastics (PSMPs) and Cu were first carried out by applying batch adsorption experiments. Subsequently, the transport and retention of PSMPs and Cu in saturated porous media was explored through column experiments. The interaction process between PSMPs and Cu was further investigated using density functional theory (DFT) calculations. Findings demonstrated that PSMPs had strong adsorption capacity for Cu ((60.07 ± 2.57) mg g-1 at pH 7 and ionic strength 0 M) and the adsorption process was chemically dominated, non-uniform, and endothermic. The O-containing functional groups on PSMP surfaces showed essential roles in Cu adsorption, and the adsorption process mainly contained electrostatic and complexation interactions. In column experiments, Cu could inhibit PSMP transport by the cation bridging effect and changing the electrical properties of glass beads, while PSMPs may facilitate Cu transport through the carrying effect. These findings confirmed that interfacial interactions between MPs and Cu could influence their transport in saturated porous media directly, providing great environmental significance.

Response of soil heavy metal forms and bioavailability to the application of microplastics across five years in different soil types.

Microplastics (MPs) potentially alter physicochemical and transformation of heavy metals (HMs) in soils, which may depend on the specific characteristics of soil types. However, the dynamical and long-term mechanisms remain to be elucidated. A five-year incubation experiment was conducted to evaluate the influence of MPs on the chemical speciation of Pb, Ni, Cu, Cr, Cd, and As in the meadow, tidal, cinnamon, saline-alkali, and brown soils. From the first year to the fifth year, the clay value of the meadow, tidal, cinnamon, and saline-alkali soils was increased by 31.35 %, 9.63 %, 30.12 %, and 33.12 %, respectively; the pH values of the cinnamon and saline-alkali soils were increased by 15.02 % and 15.86 %, respectively. Besides, speciation distribution results suggested that the application of MPs reduced the liable available (LB) form (F2-dissolved and F3-ion exchangeable) of HMs and increased the potentially available (PB) form (F5-minerals and F6-organic-bound fraction) of HMs in all soils. Compared with other forms, F2 HMs fraction was the most responsive to MPs. Furthermore, the average bioconcentration factor (BCF) of Cr and Pb decreased by 73.75 % and 70.41 % in soils, respectively. Interestingly, soil type showed more impact on the form of HMs, which was associated with the different physicochemical parameters of soils, while application time displayed more impact on the bioavailability of HMs. Moreover, our results suggested that soils with higher clay content and pH values (such as cinnamon and saline-alkali soils) may mitigate the bioavailability of HMs more effectively in the presence of MPs, while soils with lower clay content may be more vulnerable to HMs contamination over time. This work highlights the importance of long-term monitoring of the impact of MPs on HMs dynamics for effective mitigation of soil contamination risks. Our study provides valuable guidance for soil remediation strategies and environmental quality management across different soil types.

Remediation of toxic metal and metalloid pollution with plant symbiotic fungi.

Anthropogenic activities have dramatically accelerated the release of toxic metal(loid)s into soil and water, which can be subsequently accumulated in plants and animals, threatening biodiversity, human health, and food security. Compared to physical and chemical remediation, bioremediation of metal(loid)-polluted soil using plants and/or plant symbiotic fungi is usually low-cost and environmentally friendly. Mycorrhizal fungi and endophytic fungi are two major plant fungal symbionts. Mycorrhizal fungi can immobilize metal(loid)s via constitutive mechanisms, including intracellular sequestration with vacuoles and vesicles and extracellular immobilization by cell wall components and extracellular polymeric substances such as glomalin. Mycorrhizal fungi can improve the efficacy of phytoremediation by promoting plant symplast and apoplast pathways. Endophytic fungi also use constitutive cellular components to immobilize metal(loid)s and to reduce the accumulation of metal(loid)s in plants by modifying plant physiological status. However, a specific mechanism for the removal of methylmercury pollution was recently discovered in the endophytic fungi Metarhizium, which could be acquired from bacteria via horizontal gene transfer. In contrast to mycorrhizal fungi that are obligate biotrophs, some endophytic fungi, such as Metarhizium and Trichoderma, can be massively and cost-effectively produced, so they seem to be well-placed for remediation of metal(loid)-polluted soil on a large scale.

Investigating the role of extracellular polymeric substances produced by Parachlorella kessleri in Zn(II) bioremediation using atomic force microscopy.

Microalgae, such as Parachlorella kessleri, have significant potential for environmental remediation, especially in removing heavy metals like zinc from water. This study investigates how P. kessleri, isolated from a polluted river in Argentina, can remediate zinc. Using atomic force microscopy (AFM), the research examined the interactions between Zn particles and cells grown with different nitrogen sources-nitrate or ammonium. The results showed that cells grown with nitrate produced extracellular polymeric substances (EPS), while those grown with ammonium did not. Raman spectroscopy revealed distinct metabolic responses based on the nitrogen source, with nitrate-grown cells showing altered profiles after zinc exposure. Zinc exposure also changed the surface roughness and nanomechanical properties of the cells, particularly in those producing EPS. AFM force spectroscopy experiments then confirmed strong Zn binding to EPS in nitrate-grown cells, while interactions were weaker in ammonium-grown cells that lacked EPS. Overall, our results elucidate the critical role of EPS in Zn removal by P. kessleri cells and show that Zn remediation is mediated by EPS adsorption. This study underscores the significance of regulating nitrogen sources to stimulate EPS production, offering insights that are essential for subsequent bioremediation applications.

Protective effects of the exogenous application of salicylic acid and chitosan on chromium-induced photosynthetic capacity and osmotic adjustment in Aconitum napellus.

Chitosan (CTS) is recognized for enhancing a plant's resilience to various environmental stresses, such as salinity and drought. Moreover, salicylic acid (SA) is acknowledged as a growth regulator involved in addressing metal toxicity. However, the effectiveness of both compounds in mitigating Cr-induced stress has remained relatively unexplored, especially in the case of Aconitum napellus, a medicinally and floricultural important plant. Therefore, the primary objective of this study was to investigate the potential of CTS and SA in alleviating chromium (Cr)-induced stress in A. napellus. To address these research questions, we conducted a controlled experiment using potted plants to evaluate the individual and combined impacts of CTS and SA on plants exposed to Cr stress. Foliar application of CTS (0.4 g/L) or SA (0.25 mmol/L) led to significant improvements in the growth, chlorophyll content, fluorescence, and photosynthetic traits of A. napellus plants under Cr stress. The most notable effects were observed with the combined application of CTS and SA, resulting in increases in various morphological parameters, such as shoot length (2.89% and 7.02%) and root length (27.75% and 3.36%) under the Cr 1 and Cr 2 treatments, respectively. Additionally, several physiological parameters, such as chlorophyll a (762.5% and 145.56%), chlorophyll b (762.5% and 145.56%), carotenoid (17.03% and 28.57%), and anthocyanin (112.01% and 47.96%) contents, were notably improved under the Cr 1 and Cr 2 treatments, respectively. Moreover, the combined treatment of CTS and SA improved the fluorescence parameters while decreasing the levels of enzymatic antioxidants such as catalase (27.59% and 43.79%, respectively). The application also notably increased osmoprotectant parameters, such as the total protein content (54.11% and 20.07%) and the total soluble sugar content (78.17% and 49.82%) in the leaves of A. napellus in the Cr 1 and 2 treatments, respectively. In summary, these results strongly suggest that the simultaneous use of exogenous CTS and SA is an effective strategy for alleviating the detrimental effects of Cr stress on A. napellus. This integrated approach opens promising avenues for further exploration and potential implementation within agricultural production systems.

Proteomic analysis of toxic effects of short-term cadmium exposure on goat livers.

Food safety is closely related to environmental pollution. It is worth noting that the long-term accumulation of Cd, a toxic heavy metal, in animals may pose a threat to human health through food chain. Previous studies have found that Cd exposure may cause liver metabolic disorders of black goats, but the mechanism of its impact on liver proteome of goats has not been widely studied. Therefore, in this study, ten male goats (Nubian black goat × native black goat) were exposed to Cd via drinking water containing CdCl2 (20 mg Cd·kg - 1·BW) for 30 days (five male goats per group). Blood physiology and liver antioxidant indices in black goats were determined and differentially expressed proteins (DEPs) in the livers of Cd-exposed goats were profiled by using TMT-labelled proteomics. It was found that plasma Hb and RBC levels as well as PCV values were decreased, liver SOD, GSH-Px, T-AOC and CAT levels were decreased, and MDA level was increased in Cd-treated goats, and 630 DEPs (up 326, down 304) in the livers of Cd-treated goats. Proteomics analysis revealed that Cd exposure affected glutathione metabolism and drug metabolism-cytochrome P450. We identified GP×2, GSTM3, and TBXAS1 as potential protein markers of early Cd toxicity in goats. This study provided theoretical basis for early diagnosis of Cd poisoning in goats.

Generalized and Scalable Synthesis of Manganese Dioxide-Based Tubular Micromotors for Heavy Metal Ion Removal.

Synthetic nano- and micromachines hold immense promise in biomedicine and environmental science. Currently, bubble-driven tubular micro/nanomotors have garnered increasing attention owing to their exceptional high-speed self-propulsions. However, complex and low-yield preparation methods have hindered their widespread applications. Herein, we present a generalized, scalable, and low-cost electrospinning-based strategy to fabricate MnO2-based composite tubular micromotors (MnO2-TMs) for efficient heavy metal ion removal. The inherent flexibility of precursor nanofibers derived from diverse matrix materials enables the creation of MnO2-TMs with a wide range of morphologies. In response to morphology changes, the MnO2-TMs, based on a bubble-propelled mechanism, exhibit multimodal motion patterns, including linear, circular, and spiral to stochastic swinging. To elucidate the underlying morphology-to-motion relationship, we conducted systematic simulations of fluid dynamics around the MnO2-TMs. Furthermore, by incorporation of Fe3O4 nanoparticles, the capabilities of MnO2-TMs can be expanded to include magnetic manipulation for directional navigation and efficient retrieval. Benefiting from these attributes, MnO2-TMs excel in removing heavy metal ions from water. The developed MnO2-MnWO4@Fe3O4 TMs exhibit prominent adsorption capacities of 586.5 mg g-1 for Cu2+ and 156.4 mg g-1 for Pb2+. Notably, the magnetic property facilitates rapid separation and retrieval of the micromotors, and the absorbed ions can be simply recovered by pH adjustment. This work establishes a general framework for developing MnO2-based tubular micro/nanomotors to address environmental challenges.

Cadmium and calcium ions' effects on the growth of Pleurotus ostreatus mycelia are related to phosphatidylethanolamine content.

Heavy metal Cd2+ can easily be accumulated by fungi, causing significant stress, with the fungal cell membrane being one of the primary targets. However, the understanding of the mechanisms behind this stress remains limited. This study investigated the changes in membrane lipid molecules of Pleurotus ostreatus mycelia under Cd2+ stress and the antagonistic effect of Ca2+ on this stress. Cd2+ in the growth media significantly inhibited mycelial growth, with increasing intensity at higher concentrations. The addition of Ca2+ mitigated this Cd2+-induced growth inhibition. Lipidomic analysis showed that Cd2+ reduced membrane lipid content and altered lipid composition, while Ca2+ counteracted these changes. The effects of both Cd2+ and Ca2+ on lipids are dose dependent and phosphatidylethanolamine appeared most affected. Cd2+ also caused a phosphatidylcholine/phosphatidylethanolamine ratio increase at high concentrations, but Ca2+ helped maintain normal levels. The acyl chain length and unsaturation of lipids remained unaffected, suggesting Cd2+ doesn't alter acyl chain structure of lipids. These findings suggest that Cd2+ may affect the growth of mycelia by inhibiting the synthesis of membrane lipids, particular the synthesis of phosphatidylethanolamine, providing novel insights into the mechanisms of Cd2+ stress in fungi and the role of Ca2+ in mitigating the stress.

Soil application of FeCl3 and Fe2(SO4)3 reduced grain cadmium concentration in Polish wheat (Triticum polonicum L.).

BACKGROUND: Wheat is one of major sources of human cadmium (Cd) intake. Reducing the grain Cd concentrations in wheat is urgently required to ensure food security and human health. In this study, we performed a field experiment at Wenjiang experimental field of Sichuan Agricultural University (Chengdu, China) to reveal the effects of FeCl3 and Fe2(SO4)3 on reducing grain Cd concentrations in dwarf Polish wheat (Triticum polonicum L., 2n = 4x = 28, AABB). RESULTS: Soil application of FeCl3 and Fe2(SO4)3 (0.04 M Fe3+/m2) significantly reduced grain Cd concentration in DPW at maturity by 19.04% and 33.33%, respectively. They did not reduce Cd uptake or root-to-shoot Cd translocation, but increased Cd distribution in lower leaves, lower internodes, and glumes. Meanwhile, application of FeCl3 and Fe2(SO4)3 up-regulated the expression of TpNRAMP5, TpNRAMP2 and TpYSL15 in roots, and TpYSL15 and TpZIP3 in shoots; they also downregulated the expression of TpZIP1 and TpZIP3 in roots, and TpIRT1 and TpNRAMP5 in shoots. CONCLUSIONS: The reduction in grain Cd concentration caused by application of FeCl3 and Fe2(SO4)3 was resulted from changes in shoot Cd distribution via regulating the expression of some metal transporter genes. Overall, this study reports the physiological pathways of soil applied Fe fertilizer on grain Cd concentration in wheat, suggests a strategy for reducing grain Cd concentration by altering shoot Cd distribution.

Organic fertilizer improved the lead and cadmium metal tolerance of Eucalyptus camaldulensis by enhancing the uptake of potassium, phosphorus, and calcium.

Phytoremediation is a strategy for the amelioration of soil heavy metal contamination that aligns with ecological sustainability principles. Among the spectrum of phytoremediation candidates, woody plants are considered particularly adept for their substantial biomass, profound root systems, and non-participation in the food chain. This study used Eucalyptus camaldulensis-a tree species characterized for its high biomass and rapid growth rate-to assess its growth and metal uptake in mining tailings. The results were as follows: exposure to heavy metals reduced the E. camaldulensis uptake of potassium (K), phosphorus (P), and calcium (Ca). Heavy metal stress negatively affected the biomass of E. camaldulensis. Lead (Pb) primarily accumulated in the roots, while cadmium (Cd) predominantly accumulated in the stems. The application of organic fertilizers bolstered the stress tolerance of E. camaldulensis, mitigating the adverse impacts of heavy metal stress. A synergistic effect occurred when organic fertilizers were combined with bacterial fertilizers. The plant's enrichment capacity for Cd and its tolerance to Pb was augmented through the concurrent application of bacterial and organic fertilizers. Collectively, the application of organic fertilizers improved the heavy metal tolerance of E. camaldulensis by enhancing the uptake of K, P, and Ca and elevating the content of glutathione peroxidase (GPX) and gibberellin acid (GA) in roots. These findings provided nascent groundwork for breeding E. camaldulensis with enhanced heavy metal tolerance. Moreover, this proved the potentiality of E. camaldulensis for the management of heavy metal-contaminated tailings and offers a promising avenue for future environmental restoration.

Engineering the Future: Unveiling Novel Paths in Heavy Metal Wastewater Remediation with Advanced Carbon-Based Nanomaterials - Beyond Performance Comparison, Tackling Challenges, and Exploring Opportunities.

This review addresses the pressing issue of heavy metal pollution in water, specifically focusing on the application of adsorption technology utilizing carbon materials such as biochar, carbon nanotubes, graphene, and carbon quantum dots. Utilizing bibliometric analysis with VOSviewer based on Web of Science core dataset, this study identifies research hotspots related to carbon-based materials in heavy metal applications over the past decade. However, existing literature still lacks sufficient comparative analysis of the potential of carbon-based materials' structural characteristics and inherent advantages in heavy metal applications. This review strategically addresses this gap, offering a comprehensive comparative analysis of these four materials from an engineering application perspective. It offers a thorough evaluation of their suitability for various water treatment applications, providing a detailed examination of their advantages and limitations in heavy metal application. Additionally, the review provides insights into performance comparisons, addresses challenges, and explores emerging opportunities in this field. Insights into potential application fields based on structural characteristics and inherent advantages are presented. This unique focus on a comprehensive comparative analysis distinguishes the article, offering a nuanced perspective on the strengths and future possibilities of carbon materials in tackling the global challenge of heavy metal pollution in water.

Groundwater geochemistry using modified integrated water quality index (IWQI) and health indices with special emphasis on nitrates and heavy metals in southern parts of Tirupati, South India.

Groundwater is particularly vulnerable to pollution in places with a high population density and extensive human usage of the land, especially in southern parts of Tirupati, India. To assess this, 60 bore-well samples were obtained and assessed for physical specifications, ion chemistry, and heavy metals during the pre- and post-monsoon seasons 2022. The current investigation employed a modified integrated water quality index (IWQI), conventional graphical and human health risk assessment (HHRA) of nitrates and heavy metals to know the groundwater chemistry and its detrimental health effects on humans. The major ions were analyzed using American public health association (APHA) standards, whereas heavy metals were analyzed using inductively coupled plasma optical emission spectrometry (ICP-OES). Additionally, pH Redox Equilibrium and C (PHREEQC), a geochemical model written in C programming language was employed to determine the saturation indices of mineral facies and ArcGIS 10.3.1 was used for spatial distribution patterns of IWQI. Then, the HHRA of nitrates and heavy metals was performed using United States environmental protection agency (US EPA) guidelines. The noteworthy outcomes include elevated levels of Ca2+, Mg2+, Cl-, NO3-, Cu, Fe, Mn, and Pb, demonstrating rock-water interaction, silicate weathering, Ca-Mg-HCO3 followed by mixed water facies, dissolution/precipitation, reverse exchange, and anthropogenic contamination are the major controlling processes in groundwater of southern Tirupati, India. The modified IWQI reveals that most groundwater samples (38%) fall under the bad quality class, with (47%) in the poor quality class and only (15%) classified as medium quality class in pre- and post-monsoon seasons. Elevated IWQI were observed in all directions except in the east, which is suitable for drinking. Moreover, the major hazard quotient (HQ) and hazard index (HI) for nitrates (NO3-) and heavy metals like copper (Cu), iron (Fe), manganese (Mn), lead (Pb) and zinc (Zn) are above the critical value of 1, revealing potential risk to humans, especially infants, followed by children and adults, entailing the instantaneous implementation of proper remedial measures and stringent policies to reduce the risk associated with groundwater pollution in the southern parts of Tirupati.