RESUMEN
Cyclo[n]carbon (Cn) is one member of the all-carbon allotrope family with potential applications in next-generation electronic devices. By employing first-principles quantum transport calculations, we have investigated the electronic transport properties of single-molecule junctions of Cn, with n = 14, 16, 18, and 20, connected to two bulk gold electrodes, uncovering notable distinctions arising from the varying aromaticities. For the doubly aromatic C14 and C18 molecules, slightly deformed complexes at the singlet state arise after bonding with one Au atom at each side; in contrast, the reduced energy gaps between the highest occupied and the lowest unoccupied molecular orbitals due to the orbital reordering observed in the doubly anti-aromatic C16 and C20 molecules lead to heavily deformed asymmetric complexes at the triplet state. Consequently, spin-unpolarized transmission functions are obtained for the Au-C14/18-Au junctions, while spin-polarized transmission appears in the Au-C16/20-Au junctions. Furthermore, the asymmetric in-plane π-type hybrid molecular orbitals of the Au-C16/20-Au junctions contribute to two broad but low transmission peaks far away from the Fermi level (Ef), while the out-of-plane π-type hybrid molecular orbitals dominate two sharp transmission peaks that are adjacent to Ef, thus resulting in much lower transmission coefficients at Ef compared to those of the Au-C14/18-Au junctions. Our findings are helpful for the design and application of future cyclo[n]carbon-based molecular electronic devices.
RESUMEN
The field of molecular electronics has emerged from efforts to understand electron propagation through single molecules and to use them in electronic circuits. Serving as a testbed for advanced theoretical methods, it reveals a significant discrepancy between the operational time scales of experiments (static to GHz frequencies) and theoretical models (femtoseconds). Utilizing a recently developed time-linear nonequilibrium Green function formalism, we model molecular junctions on experimentally accessible time scales. Our study focuses on the quantum pump effect in a benzenedithiol molecule connected to two copper electrodes and coupled with cavity photons. By calculating both electric and photonic current responses to an ac bias voltage, we observe pronounced electroluminescence and high harmonic generation in this setup. The mechanism of the latter effect is more analogous to that from solids than from isolated molecules, with even harmonics being suppressed or enhanced depending on the symmetry of the driving field.
RESUMEN
The electrostatic environment around nanoscale molecular junctions modulates charge transport; solvents alter this environment. Methods to directly probe solvent effects require correlating measurements of the local electrostatic environment with charge transport across the metal-molecule-metal junction. Here, we measure the conductance and current-voltage characteristics of molecular wires using a scanning tunneling microscope-break junction (STM-BJ) setup in two commonly used solvents. Our results show that the solvent environment induces shifts in molecular conductance, which we quantify, but more importantly we find that the solvent also impacts the magnitude of current rectification in molecular junctions. By incorporating electrochemical impedance spectroscopy into the STM-BJ setup, we measure the capacitance of the dipole layer formed at the metal-solvent interface and show that rectification can be correlated with solvent capacitance. These results provide a method of quantifying the impact of the solvent environment and a path toward improved environmental control of molecular devices.
RESUMEN
Organometallic molecules are promising for molecular electronic devices due to their potential to improve electrical conductance through access to complex orbital covalency that is not available to light-element organic molecules. However, studies of the formation of organometallic monolayers and their charge transport properties are scarce. Here, we report the cluster formation and charge transport properties of gold-triarylbismuthane-gold molecular junctions. We found that triarylbismuthane molecules with -CN anchoring groups form clusters during the creation of self-assembled submonolayers. This clustering is attributed to strong interactions between the bismuth (Bi) center and the nitrogen atom in the -CN group of adjacent molecules. Examination of the influence of -NH2 and -CN anchoring groups on junction conductance revealed that, despite a stronger binding energy between the -NH2 group and gold, the conductance per molecular unit (i.e., molecule for the -NH2 group and cluster for the -CN group) is higher with the -CN anchoring group. Further analysis showed that an increase in the number of -CN groups from one to three within the junctions leads to a decrease in conductance while increasing the size of the cluster. This demonstrates the significant effects of different anchoring groups and the impact of varying the number of -CN groups on both the charge transport and cluster formation. This study highlights the importance of selecting the appropriate anchoring group in the design of molecular junctions. Additionally, controlling the size and formation of clusters can be a strategic approach to engineering charge transport in molecular junctions.
RESUMEN
Visible-light sensitive and bi-functionally favored CO2 reduction (CRR)/evolution (CER) photocathode catalysts that can get rid of the utilization of ultraviolet light and improve sluggish kinetics is demanded to conquer the current technique-barrier of traditional Li-CO2 battery. Here, a kind of redox molecular junction sp2c metal-covalent organic framework (i.e. Cu3-BTDE-COF) has been prepared through the connection between Cu3 and BTDE and can serve as efficient photocathode catalyst in light-assisted Li-CO2 battery. Cu3-BTDE-COF with redox-ability, visible-light-adsorption region, electron-hole separation ability and endows the photocathode with excellent round-trip efficiency (95.2 %) and an ultralow voltage hysteresis (0.18â V), outperforming the Schiff base COFs (i.e. Cu3-BTDA-COF and Cu3-DT-COF) and majority of the reported photocathode catalysts. Combined theoretical calculations with characterizations, Cu3-BTDE-COF with the integration of Cu3 centers, thiazole and cyano groups possess strong CO2 adsorption/activation and Li+ interaction/diffusion ability to boost the CRR/CER kinetics and related battery property.
RESUMEN
Underpotential deposition (UPD) is an intriguing means for tailoring the interfacial electronic structure of an adsorbate at a substrate. Here we investigate the impact of UPD on thermoelectricity occurring in molecular tunnel junctions based on alkyl self-assembled monolayers (SAMs). We observed noticeable enhancements in the Seebeck coefficient of alkanoic acid and alkanethiol monolayers, by up to 2- and 4-fold, respectively, upon replacement of a conventional Au electrode with an analogous bimetallic electrode, Cu UPD on Au. Quantum transport calculations indicated that the increased Seebeck coefficients are due to the UPD-induced changes in the shape or position of transmission resonances corresponding to gateway orbitals, which depend on the choice of the anchor group. Our work unveils UPD as a potent means for altering the shape of the tunneling energy barrier at the molecule-electrode contact of alkyl SAM-based junctions and hence enhancing thermoelectric performance.
RESUMEN
Electronic flicker noise is recognized as the most abundant noise in electronic conductors, either as an unwanted contribution or as a source of information on electron transport mechanisms and material properties. This noise is typically observed when a voltage difference is applied across a conductor or current is flowing through it. Here, we identify an unknown type of electronic flicker noise that is found when a temperature difference is applied across a nanoscale conductor in the absence of a net charge current or voltage bias. The revealed delta-T flicker noise is demonstrated in molecular junctions and characterized using quantum transport theory. This noise is expected to arise in nanoscale electronic conductors subjected to unintentional temperature gradients, where it can be a performance-limiting factor. On the positive side, delta-T flicker noise can detect temperature differences across a large variety of nanoscale conductors, down to atomic-scale junctions with no special setup requirements.
RESUMEN
The high local electron density and efficient charge carrier separation are two important factors to affect photocatalytic activity, especially for the CO2 photoreduction reaction. However, the systematic studies on the structure-functional relationship regarding the above two factors based on precisely structure model are rarely reported. Herein, as a proof-of-concept, we developed a new strategy on the evaluation of local electron density by controlling the relative electron-deficient (ED) and electron-rich (ER) intensity of monomer at a molecular level based on three rational-designed vinylene-linked sp2 carbon-covalent organic frameworks (COFs). As expected, the as-prepared vinylene-linked sp2 carbon-conjugated metal-covalent organic framework (MCOFs) (VL-MCOF-1) with molecular junction exhibited excellent activities for CO2 -to-HCOOH conversion (283.41â µmol g-1 h-1 ) and high selectivity of 97.1 %, much higher than the VL-MCOF-2 and g-C34 N6 -COF, which is due to the synergistic effect of the multi-electronic metal clusters (Cu3 (PyCA)3 ) (PyCA=pyrazolate-4-carboxaldehyde) as strong ER roles and cyanopyridine units as ED roles and active sites, as well as the boosted photo-induced charge separation efficiency of vinyl connection and increased light utilization ability. These results not only provide a strategy for regulating the electron-density distribution of photocatalysts at the molecular level but also offers profound insights for metal clusters-based COFs to effective CO2 conversion.
RESUMEN
Forming atomic-scale contacts with attractive geometries and material compositions is a long-term goal of nanotechnology. Here, we show that a rich family of bimetallic atomic-contacts can be fabricated in break-junction setups. The structure and material composition of these contacts can be controlled by atomically precise electromigration, where the metal types of the electron-injecting and sink electrodes determine the type of atoms added to, or subtracted from, the contact structure. The formed bimetallic structures include, for example, platinum and aluminum electrodes bridged by an atomic chain composed of platinum and aluminum atoms as well as iron-nickel single-atom contacts that act as a spin-valve break junction without the need for sophisticated spin-valve geometries. The versatile nature of atomic contacts in bimetallic junctions and the ability to control their structure by electromigration can be used to expand the structural variety of atomic and molecular junctions and their span of properties.
RESUMEN
Nanoparticle superlattices produced with controllable interparticle gap distances down to the subnanometer range are of superior significance for applications in electronic and plasmonic devices as well as in optical metasurfaces. In this work, a method to fabricate large-area (â¼1 cm2) gold nanoparticle (GNP) superlattices with a typical size of single domains at several micrometers and high-density nanogaps of tunable distances (from 2.3 to 0.1 nm) as well as variable constituents (from organothiols to inorganic S2-) is demonstrated. Our approach is based on the combination of interfacial nanoparticle self-assembly, subphase exchange, and free-floating ligand exchange. Electrical transport measurements on our GNP superlattices reveal variations in the nanogap conductance of more than 6 orders of magnitude. Meanwhile, nanoscopic modifications in the surface potential landscape of active GNP devices have been observed following engineered nanogaps. In situ optical reflectance measurements during free-floating ligand exchange show a gradual enhancement of plasmonic capacitive coupling with a diminishing average interparticle gap distance down to 0.1 nm, as continuously red-shifted localized surface plasmon resonances with increasing intensity have been observed. Optical metasurfaces consisting of such GNP superlattices exhibit tunable effective refractive index over a broad wavelength range. Maximal real part of the effective refractive index, nmax, reaching 5.4 is obtained as a result of the extreme field confinement in the high-density subnanometer plasmonic gaps.
RESUMEN
In contrast to silicon-based transistors, single-molecule junctions can be gated by simple mechanical means. Specifically, charge can be transferred between the junction's electrodes and its molecular bridge when the interelectrode distance is modified, leading to variations in the electronic transport properties of the junction. While this effect has been studied extensively, the influence of the molecular orientation on mechanical gating has not been addressed, despite its potential influence on the gating effectiveness. Here, we show that the same molecular junction can experience either clear mechanical gating or none, depending on the molecular orientation in the junctions. The effect is found in silver-ferrocene-silver break junctions and analyzed in view of ab initio and transport calculations, where the influence of the molecular orbital geometry on charge transfer to or from the molecule is revealed. The molecular orientation is thus a new degree of freedom that can be used to optimize mechanically gated molecular junctions.
RESUMEN
The manipulation of single molecules has attracted extensive attention because of their promising applications in chemical, biological, medical, and materials sciences. Optical trapping of single molecules at room temperature, a critical approach to manipulating the single molecule, still faces great challenges due to the Brownian motions of molecules, weak optical gradient forces of laser, and limited characterization approaches. Here, we put forward localized surface plasmon (LSP)-assisted trapping of single molecules by utilizing scanning tunneling microscope break junction (STM-BJ) techniques, which could provide adjustable plasmonic nanogap and characterize the formation of molecular junction due to plasmonic trapping. We find that the plasmon-assisted trapping of single molecules in the nanogap, revealed by the conductance measurement, strongly depends on the molecular length and the experimental environments, i.e., plasmon could obviously promote the trapping of longer alkane-based molecules but is almost incapable of acting on shorter molecules in solutions. In contrast, the plasmon-assisted trapping of molecules can be ignored when the molecules are self-assembled (SAM) on a substrate independent of the molecular length.
RESUMEN
The charge transport through single-molecule electronic devices can be controlled mechanically by changing the molecular geometrical configuration in situ, but the tunable conductance range is typically less than two orders of magnitude. Herein, we proposed a new mechanical tuning strategy to control the charge transport through the single-molecule junctions via switching quantum interference patterns. By designing molecules with multiple anchoring groups, we switched the electron transport between the constructive quantum interference (CQI) pathway and the destructive quantum interference (DQI) pathway, and more than four orders of magnitude conductance variation can be achieved by shifting the electrodes in a range of about 0.6â nm, which is the highest conductance range ever achieved using mechanical tuning.
RESUMEN
Single-molecule junctions and self-assembled monolayer junctions are attractive architectures for thermoelectric devices. However, given the poor thermoelectric performance of organic molecules investigated so far, molecules characterized by high conductance and Seebeck coefficient values are desired to be explored. Metal complexes are promising possible active components of high-performance thermoelectric devices given that metal-ligand combinations and functions can be made to vary to modulate the transmission functions, thus strongly influencing conductance and Seebeck coefficient. In this concept article are described recent studies wherein thermoelectric measurements were conducted on metal complex junctions. Furthermore, the potential for the use of the junctions in thermoelectric devices is discussed.
RESUMEN
The study of charge transport through proteins is essential for understanding complicated electrochemical processes in biological activities while the reasons for the coexistence of tunneling and hopping phenomena in protein junctions still remain unclear. In this work, a flexible and conductive ionogel electrode is synthesized and is used as a top contact to form highly reproducible protein junctions. The junctions of proteins, including human serum albumin, cytochrome C and hemoglobin, show temperature-independent electron tunneling characteristics when the junctions are in solid states while with a different mechanism of temperature-dependent electron hopping when junctions are hydrated under physiologically relevant conditions. It is demonstrated that the solvent reorganization energy plays an important role in the electron-hopping process and experimentally shown that it requires ≈100 meV for electron hopping through one heme group inside a hydrated protein molecule connected between two electrodes.
Asunto(s)
Electrodos , Humanos , Temperatura , Conductividad EléctricaRESUMEN
Food contamination by aflatoxins is an urgent global issue due to its high level of toxicity and the difficulties in limiting the diffusion. Unfortunately, current detection techniques, which mainly use biosensing, prevent the pervasive monitoring of aflatoxins throughout the agri-food chain. In this work, we investigate, through ab initio atomistic calculations, a pyrrole-based Molecular Field Effect Transistor (MolFET) as a single-molecule sensor for the amperometric detection of aflatoxins. In particular, we theoretically explain the gate-tuned current modulation from a chemical-physical perspective, and we support our insights through simulations. In addition, this work demonstrates that, for the case under consideration, the use of a suitable gate voltage permits a considerable enhancement in the sensor performance. The gating effect raises the current modulation due to aflatoxin from 100% to more than 103÷104%. In particular, the current is diminished by two orders of magnitude from the µA range to the nA range due to the presence of aflatoxin B1. Our work motivates future research efforts in miniaturized FET electrical detection for future pervasive electrical measurement of aflatoxins.
Asunto(s)
Aflatoxinas , Técnicas Biosensibles , Aflatoxina B1/análisis , Aflatoxinas/análisis , Contaminación de Alimentos/análisisRESUMEN
The full reaction photosynthesis of H2 O2 that can combine water-oxidation and oxygen-reduction without sacrificial agents is highly demanded to maximize the light-utilization and overcome the complex reaction-process of anthraquinone-oxidation. Here, a kind of oxidation-reduction molecular junction covalent-organic-framework (TTF-BT-COF) has been synthesized through the covalent-coupling of tetrathiafulvalene (photo-oxidation site) and benzothiazole (photo-reduction site), which presents visible-light-adsorption region, effective electron-hole separation-efficiency and photo-redox sites that enables full reaction generation of H2 O2 . Specifically, a record-high yield (TTF-BT-COF, ≈276 000â µM h-1 g-1 ) for H2 O2 photosynthesis without sacrificial agents has been achieved among porous crystalline photocatalysts. This is the first work that can design oxidation-reduction molecular junction COFs for full reaction photosynthesis of H2 O2 , which might extend the scope of COFs in H2 O2 production.
RESUMEN
The paper demonstrates the effect of the chemical conformation of the -COOH group on the transport characteristic including conductance, rectification, and length effect in molecular junctions (MJs) formed by self-assembled monolayers of carboxylic-terminated thiol molecules. For an alkyl chain shorter than C11, the transport mechanism was attributed to a direct off-resonant tunneling of a hole carrier, located at the Au-S interface, whereas a hopping mechanism was assigned to the alkyl chain longer than the C11 chain located at the -COOH group. The hopping mechanism may be operated by electron transport associated with the breaking of the -OH bonding likely driven by a voltage. Importantly, at the C11 alkyl chain, we observed that the transport carrier operating in MJs could change from a hole carrier into an electron carrier. The result strongly proves that the chemical conformation should be considered in analyzing molecular electronics and provides a basis for the rational design of molecular electronic devices.
Asunto(s)
Electrónica , Compuestos de Sulfhidrilo , Compuestos de Sulfhidrilo/química , Conformación Molecular , ElectrodosRESUMEN
Au-n-octanedithiol-Au molecular junction (Au-SC8S-Au) has been investigated using density functional theory combined with the nonequilibrium Green's function approach. Theoretically calculated results are used to build the relationship between the interface binding structures and single-molecule quantum conductance of n-octanedithiol (SC8S) embodied in a gold nanogap with or without stretching forces. To understand the electron transport mechanism in the single molecular nanojunction, we designed three types of Au-SC8S-Au nanogaps, including flat electrode through an Au atom connecting (Model I), top-pyramidal or flat electrodes with the molecule adsorbing directly (Model II), and top-pyramidal Au electrodes with Au atomic chains (Model III). We first determined the optimized structures of different Au-SC8S-Au nanogaps, and then predicted the distance-dependent stretching force and conductance in each case. Our calculated results show that in the Model I with an Au atom bridging the flat Au (111) gold electrodes and the SC8S molecule, the conductance decreases exponentially before the fracture of Au-Au bond, in a good agreement with the experimental conductance in the literature. For the top-pyramidal electrode Models II and III, the magnitudes of molecular conductance are larger than that in Model I. Our theoretical calculations also show that the Au-Au bond fracture takes place in Models I and III, while the Au-S bond fracture appears in Model II. This is explained due to the total strength of three synergetic Au-Au bonds stronger than an Au-S bond in Model II. This is supported from the broken force about 2 nN for the Au-Au bond and 3 nN for the Au-S bond.
RESUMEN
This paper describes the thermoelectric properties of molecular junctions incorporating multinuclear ruthenium alkynyl complexes that comprise Ru(dppe)2 [dppe = 1,2-bis(diphenylphosphino)ethane] fragments and diethylnyl aromatic bridging ligands with thioether anchors. Using the liquid metal technique, the Seebeck coefficient was examined as a function of metal nuclearity, oxidation state, and substituent on the organic ligand backbone. High Seebeck coefficients up to 73 µV/K and appreciable thermal stability with thermovoltage up to â¼3.3 mV at a heating temperature of 423 K were observed. An unusually high proximity of the highest occupied molecular orbital (HOMO) energy level to the Fermi level was revealed to give the remarkable thermoelectric performance as suggested by combined experiments and calculations. This work offers important insights into the development of molecular-scale devices for efficient thermoregulation and heat-to-electricity conversion.