Effect of crosslinker/porogen ratio on sponge-nested polymer monoliths for solid-phase extraction.

Polymer monoliths can be polymerised within different molds, but limited options are available for the preparation of free-standing polymer monoliths for analytical sample preparation, and in particular, solid-phase extraction (SPE). Commercial melamine-formaldehyde sponges can be used as supports for the preparation of polymer monoliths, due its flexibility, giving various shapes to monoliths. Herein, the crosslinker/porogen ratio of highly porous sponge-nested divinylbenzene (DVB) polymer monoliths has been evaluated. Monoliths prepared using different crosslinker/porogen ratios were applied to the extraction of bisphenol F, bisphenol A, bisphenol AF, and bisphenol B. Monoliths containing 50 wt % DVB and 50 wt % porogens presented the highest recovery of bisphenols. Under the optimised conditions, the developed method showed a linear range between 2.5 µg L-1 and 150 µg L-1 for BPA and BPAF, and between 5 µg L-1 and 150 µg L-1 for BPB and BPF. The limits of detection (LOD, S/N = 3) and limits of quantification (LOQ, S/N = 10) ranged from 0.36 µg L-1 to 1.09 µg L-1, and from 1.20 µg L-1 to 3.65 µg L-1, respectively. The recoveries for spiked bisphenols (10 µg L-1) in tap water and water contained in a polycarbonate containers were between 82 % and 114 %.

Monolith-coated microcentrifuge tubes for the easy extraction of psychoactive substances from urine samples and liquid chromatography-tandem mass spectrometry determination.

BACKGROUND: Sample extraction is one of the most critical steps in most of the analytical processes. Nowadays, there is a demand for simple approaches that can effectively extract and concentrate target analytes from complex matrices, like biofluids, with accurate and reliable results. RESULTS: A porous monolith of poly(methacrylic acid-co-ethylene glycol dimethacrylate) has been immobilized on the inner wall of a 2 mL commercial polypropylene microcentrifuge tube through radical photopolymerization, using bis(2,4,6-trimethylbenzoyl)phenylphosphine oxide as radical initiator and 405 nm laser pointer activation. Photopolymerization parameters were adjusted to obtain a continuous and homogeneous polymer layer (0.16 mm wet polymer thickness and 31 mg dry polymer weight) in the inner tube surface. Extraction efficiency of twelve psychoactive substances was assessed by the evaluation of the effect of sample pH, extraction and desorption times, and desorption solvent volume. Moreover, matrix effect, reusability and stability of monolith-coated microcentrifuge tubes were studied. Sample extracts were measured by liquid chromatography-tandem mass spectrometry, providing limits of quantification (LOQ) from 0.2 to 2.7 µg L-1, recoveries from 80 to 118 %, relative standard deviations lower than 17 %, and a linear range from LOQ to 500 µg L-1. SIGNIFICANCE: The proposed device is suitable for the easy and simple extraction of psychoactive substances from urine samples with a high portability, reduced solvent consumption, low cost, and low environmental impact.

Rapid and simple determination of organophosphorus pesticides in urine using polydopamine-modified monolithic spin column extraction combined with liquid chromatography-mass spectrometry.

The determination of organophosphorus pesticides in urine is useful for evaluating human exposure. In this study, a simple micro-solid-phase extraction method based on a polydopamine-modified monolithic spin column combined with liquid chromatography-mass spectrometry (LC-MS) was developed for the determination of six organophosphorus pesticides (dimethoate, dichlorvos, carbofuran, methidathion, phosalone, and chlorpyrifos) in urine samples. A methacrylate polymer monolithic support was prepared in situ in the spin column, and dopamine solution was repeatedly passed through the monolith matrix via centrifugation to generate a polydopamine layer in the polymeric network. All extraction steps were performed via centrifugation. The monolith exhibited good permeability, which enabled high-flow-rate sample loading and significantly reduced the sample pre-treatment time. The addition of polydopamine significantly improved the extraction efficiency of the monolithic spin column owing to the catechol and amine groups in dopamine, which can enhance hydrogen bonding and π-π stacking. Factors affecting the extraction, including the solution pH, centrifugation speed, and desorption solvent, were investigated to determine the optimal extraction conditions. Under the optimal conditions, the OPP detection limits were 0.02-1.32 µg/L. The relative standard deviations of the single column (n = 5) and column-to-column (n = 3) precision for the extraction method were <11%. The monolithic spin column exhibited high stability and could be used for more than 40 extraction cycles. The recoveries for spiked urine samples were 72.1-109.3% (RSDs: 1.6-7.9%). The developed method was successfully applied to the simple and rapid analysis of organophosphorus pesticides in urine samples.

Sponge-nested polymer monolith sorptive extraction.

Polymer monoliths are an alternative to traditional particle-packed supports used in solid-phase extraction because of their ease of preparation, high porosity, and pH stability. They often required the attachment of monoliths to a support, such as the internal walls of a column to enable their use for sample preparation. Applications of free-standing polymer monoliths are rarely found because of their limited mechanical stability. Herein, divinylbenzene monoliths were polymerised within a commercial melamine-formaldehyde sponge using different polymerisation times. The sponge-nested polymer monoliths are highly robust, and their size and shape can be easily adjusted for desired applications. The prepared sponge-nested polymer monoliths had surface areas in the range of 237 m2 g-1 to 369 m2 g-1. A melamine-formaldehyde sponge cut into 1 cm3 cubes were used to template the polymer monoliths. Miniaturized monoliths with a size of 0.125 cm3 were directly cut from the larger cubes without compromising the integrity of the porous monolith structure. The resulting nested monolith sorptive extraction (NMSE) supports were applied for the extraction of the endocrine disruptors bisphenol A, 4-tert-butylphenol, and 4-tert-octylphenol. The prepared sponge-nested monoliths are low-cost (40 monoliths/AU$). NMSE was carried out by the direct immersion of the monoliths in the aqueous standards/samples, requiring only an orbital shaker for the extraction procedure. Best performance was obtained for polymer monoliths polymerized for 6 h, enabling limits of detection of 5.6 to 6.5 µg L-1 for the selected analysis using HPLC-UV.

Paper-based monolith extraction of psychoactive substances from biological fluids.

A monolith of poly(methacrylic acid-co-ethylene glycol dimethacrylate) has been immobilised to a nitrocellulose strip by radical photopolymerisation to be used in the extraction of psychoactive substances in biological fluids. Codeine, methylone, amphetamine, methamphetamine, 3,4-methylenedioxymethamphetamine, butylone, norketamine, ketamine, heroin, cocaine, lysergic acid diethylamide and fentanyl were employed as model drugs and final extracts were analysed by ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Polymerisation parameters were adjusted in order to obtain a stable and homogeneous layer of monolith onto the nitrocellulose strip. The resulting sorptive phase was characterized by Fourier-transform infrared spectroscopy and scanning electron microscopy. Extraction conditions were investigated by the evaluation of sample pH, extraction and desorption times and desorption solvent volume, providing enrichment factor values ranging from 5.3 to 39.9. The proposed methodology provided limit of quantification values from 0.013 µg L-1 for methylone to 0.057 µg L-1 for amphetamine, and recoveries from 64 to 120%. Urine and serum certified reference materials were employed in the validation of the proposed methodology, providing results statistically comparable. The developed approach is simple and straightforward for the determination of psychoactive substances in urine and serum samples.

ZrO2-Ag2O nanocomposites encrusted porous polymer monoliths as high-performance visible light photocatalysts for the fast degradation of pharmaceutical pollutants.

This work reports a unique ZrO2-Ag2O heterojunction nanocomposite uniformly dispersed on a macro-/meso-porous polymer monolithic template to serve as simple and effective visible light-driven heterogeneous plasmonic photocatalysts for water decontamination. The monolithic photocatalysts' structural properties and surface morphology are characterized using various surface and structural characterization techniques. The photocatalytic performance of the proposed photocatalysts is evaluated by optimizing multiple operational parameters. The photocatalytic properties of the fabricated monolithic nanocomposite are monitored through time-dependent photocatalytic disintegration of norfloxacin drug, a widely employed antimicrobial, with considerable aquatic persistence. The analytical results conclude that a (60:40) ZrO2-Ag2O nanocomposite embedded polymer monolith exhibits superior photocatalytic activity for the complete mineralization of norfloxacin molecules under optimized conditions of solution pH (3.0), photocatalyst quantity (100 mg), pollutant concentration (15 mg/L), photosensitizers (2.0 mM KBrO3), visible light intensity (300 W/cm2 tungsten lamp) and irradiation time (≤ 1 h). The proposed new-age inorganic-organic hybrid visible light photo-catalysts with superior structural and surface properties exhibit brilliant performance and fast responsiveness for water decontamination applications, in addition to their excellent chemical stability, high durability, multi-reusability, and cost-effectiveness.

Utilizing RAFT Polymerization for the Preparation of Well-Defined Bicontinuous Porous Polymeric Supports: Application to Liquid Chromatography Separation of Biomolecules.

Polymer-based monolithic high-performance liquid chromatography (HPLC) columns are normally obtained by conventional free-radical polymerization. Despite being straightforward, this approach has serious limitations with respect to controlling the structural homogeneity of the monolith. Herein, we explore a reversible addition-fragmentation chain transfer (RAFT) polymerization method for the fabrication of porous polymers with well-defined porous morphology and surface chemistry in a confined 200 µm internal diameter (ID) capillary format. This is achieved via the controlled polymerization-induced phase separation (controlled PIPS) synthesis of poly(styrene-co-divinylbenzene) in the presence of a RAFT agent dissolved in an organic solvent. The effects of the radical initiator/RAFT molar ratio as well as the nature and amount of the organic solvent were studied to target cross-linked porous polymers that were chemically bonded to the inner wall of a modified silica-fused capillary. The morphological and surface properties of the obtained polymers were thoroughly characterized by in situ nuclear magnetic resonance (NMR) experiments, nitrogen adsorption-desorption experiments, elemental analyses, field-emission scanning electron microscopy (FESEM), scanning electron microscopy-energy-dispersive X-ray (SEM-EDX) spectroscopy, and X-ray photoelectron spectroscopy (XPS) as well as time-of-flight secondary ion mass spectrometry (ToF-SIMS) revealing the physicochemical properties of these styrene-based materials. When compared with conventional synthetic methods, the controlled-PIPS approach affects the kinetics of polymerization by delaying the onset of phase separation, enabling the construction of materials with a smaller pore size. The results demonstrated the potential of the controlled-PIPS approach for the design of porous monolithic columns suitable for liquid separation of biomolecules such as peptides and proteins.

Immobilization of cellulase on monolith supported with Zr(IV)-based metal-organic framework as chiral stationary phase for enantioseparation of five basic drugs in capillary electrochromatography.

Metal-organic framework (UiO-66-NH2)-incorporated organic polymer monolith was prepared by thermal polymerization. By virtue of the superior physical and chemical properties, the UiO-66-NH2-modified organic monolith was then functionalized by chiral selector cellulase via the condensation reaction between the primary amino groups and aldehyde groups. The synthesized materials were characterized by Fourier transform infrared spectroscopy, high-resolution transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectrometry, thermogravimetric analysis, and nitrogen sorption isotherm. The cellulase@poly(glycidyl methacrylate-UiO-66-NH2-ethylene glycol dimethacrylate) (cellulase@poly(GMA-UiO-66-NH2-EDMA)) monolith was applied to enantiomerically separate the basic racemic forms of metoprolol, atenolol, esmolol, bisoprolol, and propranolol. In contrast to the cellulase@poly(GMA-co-EDMA) monolith without UiO-66-NH2, the cellulase@poly(GMA-UiO-66-NH2-EDMA) monolith reveals significantly improved enantiodiscrimination performance for metoprolol (Rs: 0 → 1.67), atenolol (Rs: 0 → 1.50), esmolol (Rs: 0 → 1.52), bisoprolol (Rs: 0 → 0.36), and propranolol (Rs: 0 → 0.44). The immobilization pH of cellulase, buffer pH, UiO-66-NH2 concentration, and the proportion of organic modifier were evaluated in detail with enantiomerically separating chiral molecules. The intra-day, inter-day, column-to-column, and inter-batch precision have been discussed, the result was preferable, and the relative standard deviation (RSD) of separation parameters was <4.3%. Schematic representation of the preparation of a UiO-66-NH2-modified organic polymer monolith for enantioseparating five racemic ß-blockers. UiO-66-NH2 was synthesized and converted into a monolith as the stationary phase. Then, the modified monolith containing cellulase as the chiral selector was applied in a capillary electrochromatography system for enantioseparating chiral drugs.

Preparation of zirconium arsenate-modified monolithic column for selective enrichment of phosphopeptides.

Protein phosphorylation is a crucial posttranslational modification for the regulation of many different biological functions. Selective enrichment of phosphopeptides from the complex biological samples is an essential step for the mass spectrometry analysis of protein phosphorylation. In this study, an arsenate functionalized monolithic column was first prepared by a single-step copolymerization of p-methacryloylaminophenylarsonic acid and ethylene dimethacrylate. Then the metal ions Zr4+ were attached onto the prepared monolithic column via metal-chelate complex formation by Zr4+ and arsenate groups. The obtained monolithic column was employed as a new sorbent for the phosphopeptide enrichment via immobilized metal affinity chromatography. Phosphopeptides analysis was realized by polymer monolith microextraction using this monolithic column coupled to both matrix-assisted laser desorption/ionization mass spectrometry and liquid chromatography-electrospray ionization tandem mass spectrometry. The proposed method exhibited a high selectivity for phosphopeptide enrichment in complex matrices, and was applied to the analysis of phosphopeptides in human serum and tryptic digests of rat brain proteins. Four phosphopeptides could be selectively captured from human serum and 2608 endogenous phosphopeptides were identified from the tryptic digests of rat brain proteins, indicating a satisfactory performance of this method for the enrichment of phosphopeptides from complex biological samples.

Flow-through enzymatic reactors using polymer monoliths: From motivation to application.

The application of monolithic materials as carriers for enzymes has rapidly expanded to the realization of flow-through analysis and bioconversion processes. This expansion is partly attributed to the absence from diffusion limitation in many monoliths-based enzyme reactors. Particularly, the relatively ease of introducing functional groups renders polymer monoliths attractive as enzyme carriers. After summarizing the motivation to develop enzymatic reactors using polymer monoliths, this review reports the most recent applications of such reactors. Besides, the present review focuses on the crucial characteristics of polymer monoliths affecting the immobilization of enzymes and the processing parameters dictating the performance of the resulting enzymatic reactors. This review is intended to provide a guideline for designing and applying flow-through enzymatic reactors using polymer monoliths.

Photografting of polymer monoliths by a crosslinking monomer.

The surface of fifteen polymethacrylate monolithic stationary phases has been modified by a post-polymerization UV-initiated grafting reaction with bifunctional poly(ethylene glycol)dimethacrylate monomers. An effect of crosslinking monomer length, its concentration in the modification mixture, and a time of the modification reaction have been selected to control the extent of modification by a design of experiments protocol. Hydrodynamic and kinetic properties of prepared columns were characterized by capillary liquid chromatography. Regression analysis of determined data revealed that there is only a minor effect of modification reaction on column permeability, as it is rather controlled by the composition of the polymerization mixture used to prepare generic monolith. On the other hand, the utilization of shorter crosslinking monomer increased the formation of small pores and minimized mass transfer resistance effect. Both column efficiency and mass transfer resistance also improved when a lower concentration of crosslinking monomer in the modification mixture was used. Photografting modification decreased a negative effect of mass transfer resistance related to a crosslink density gradient and allowed fast isocratic separations of dopamine metabolism-related compounds. Developed preparation protocol might be further utilized in the preparation of monolithic stationary phases in microfluidic devices.

Structurally designed porous polymer monoliths as probe-anchoring templates as benign and fast responsive solid-state optical sensors for the sensing and recovery of copper ions.

In this study, we report on the superior ion-capturing and sensing competence of a new breed of aqua-compatible solid-state ion-sensor using a structurally organized polymer monolith, for the ocular sensing of trace levels of divalent copper ions. The polymer monolithic template exhibits a single block framework with a uniform structural pattern and porous network that serves as an efficient host for the homogeneous probe anchoring, to constitute a renewable solid-state optical sensor. Here, a series of solid-state colorimetric Cu(II) sensors has been designed using three indigenously synthesized chelating probes (molecules) namely, 4-butyl-N-(2-(2,4-dinitrophenyl)hydrazine-1-carbonothioyl)benzamide (BNHCB), 2-(thiophen-2-ylmethylene)hydrazinen-1-carbothioamide (TMHCA), and 4-butylphenyl(diazenyl)-2-mercaptopyrimidine-4,6-diol (BDMPD). The polymer monoliths are characterized using various surface and structural analysis techniques such as HR-SEM, HR-TEM, XPS, XRD, FT-IR, EDAX, and BET surface area analysis. The fabricated solid-state sensors exhibit excellent selectivity and sensitivity for copper ions with unique color transitions that are reliable even at ultra-trace (ppb) levels. The impact of diverse sensing parameters such as solution pH, probe concentration, sensor quantity, target ion concentration, temperature, response kinetics, and matrix tolerances have been optimized. The fabricated sensor materials proffer maximum sensing efficiency in neutral pH conditions, with a limit of detection (LD) and quantification (LQ) values of 0.56 and 1.87µg l-1, 0.30 and 1.0µg l-1, and 0.12 and 0.42µg l-1, for BNHCB-, BDMPD-, and TMHCA-anchored polymer sensors, respectively. The proposed reusable solid-state colorimetric sensors are environmentally benign, cost-effective and data reproducible, with superior analytical performance.

Gold nanoparticles-functionalized monolithic column for enantioseparation of eight basic chiral drugs by capillary electrochromatography.

Poly(glycidyl methacrylate)-co-(ethylene dimethacrylate) [poly(GMA-co-EDMA)] monoliths were prepared, and used as a support to attach gold nanoparticles (AuNP) via Au-S bond. Pepsin, acting as a chiral selector, was linked to the surface of the carboxyl-modified AuNP through a hydrochloride/N-hydroxysuccinimide coupling reaction. The material was characterized by scanning electron microscopy, energy dispersive X-ray spectrometry, transmission electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy and N2 adsorption-desorption isotherm. The pepsin@AuNP@poly(GMA-co-EDMA) monolith showed preferable enantioselectivity for hydroxychloroquine (HCQ), chloroquine (CHQ), hydroxyzine (HXY), labetalol (LAB), nefopam (NEF), clenbuterol (CLE), amlodipine (AML) and chlorpheniramine (CHL) in capillary electrochromatography (CEC). These racemic drugs were monitored at the maximum absorption wavelength (220 nm for HXQ, CHQ, HXY, LAB, NEF; 240 nm for AML; 215 nm for CLE, CHL). In comparison with the pepsin@poly(GMA-co-EDMA) monolith loaded with 5 nm AuNP, the pepsin@poly(GMA-co-EDMA) monolith loaded with 13 nm AuNP shows significantly enhanced enantiomeric resolution (HCQ: 0.62 → 3.45; CHQ: 0.60 → 2.11; HXY: 0.49 → 2.30; LAB: 1.03 → 2.45, 1.45 → 3.46, 0 → 0.67; NEF: 0.53 → 1.29; CLE: 0.42 → 0.56; AML: 0 → 0.83; CHL: 0.24 → 0.55). Pepsin concentration, buffer pH value, buffer concentration and applied voltage were investigated in detail with (±) HCQ and (±) HXY as model analytes. The reproducibility of intra-day, inter-day and column-to-column were explored, and found to be satisfactory. Graphical abstractSchematic presentation of the preparation of gold nanoparticles (AuNP) modified.

Dual-retention mechanism of dopamine-related compounds on monolithic stationary phase with zwitterion functionality.

Seven retention models have been selected to describe a dual-retention behavior of ten dopamine-related compounds on polymer-based monolithic stationary phase with zwitterion sulfobetaine functionality. Regression quality, as well as a statistical significance of individual regression parameters, have been evaluated. Better regression performance showed two four-parameter models when compared to three-parameter models. On the other hand, limited number of experimental points disqualified statistical robustness of four-parameter models. Among three-parameter models, retention description introduced by Horváth and Liang provided comparable quality of regression at significantly improved robustness. Multivariate analysis of the best three-parameter models provided the description of physicochemical properties of dopamine precursors and metabolites. Principal component analysis and logistic regression allowed structural characterization of dopamine-related compounds based solely on regression parameters extracted from an isocratic elution data. Both polarity and type of functional groups has been correctly assigned for 3-methoxytyramine that has not been part of an evaluation study. Among applied dual-retention models, Horváth´s model, initially developed to describe a retention of ionic compounds on nonpolar stationary phases, provided robust regression of experimental data and allowed an extraction of structural characteristics of dopamine-related compounds.

Influence of photo-initiators in the preparation of methacrylate monoliths into poly(ethylene-co-tetrafluoroethylene) tubing for microbore HPLC.

In this study, poly(butyl methacrylate-co-ethyleneglycol dimethacrylate) polymeric monoliths were in situ developed within 0.75 mm i.d. poly(ethylene-co-tetrafluoroethylene) (ETFE) tubing by UV polymerization via three different free-radical initiators (α,α'-azobisisobutyronitrile (AIBN), 2,2-dimethoxy-2-phenylacetophenone (DMPA) and 2-methyl-4'-(methylthio)-2-morpholinopropiophenone (MTMPP). The influence of the nature of each photo-initiator and irradiation time on the morphological features of the polymer was investigated by scanning electron microscopy, and the chromatographic properties of the resulting microbore columns were evaluated using alkyl benzenes as test substances. The beds photo-initiated with MTMPP gave the best performance (minimum plate heights of 38 µm for alkyl benzenes) and exhibited a satisfactory reproducibility in the chromatographic parameters (RSD < 11%). These monolithic columns were also successfully applied to the separation of phenylurea herbicides, proteins and a tryptic digest of ß-casein.

A polymer monolith composed of a perovskite and cucurbit[6]uril hybrid for highly selective enrichment of phosphopeptides prior to mass spectrometric analysis.

A hybrid monolith was prepared from perovskite and cucurbit[6]uril [poly(hydroxyethyl methacrylate-pentaerythritol triacrylate) monolith] for the enrichment of phosphopeptides. By coupling with mass spectrometry, three goals were simultaneously realized, viz. (a) selective enrichment of phosphopeptides from non-phosphopeptides, (b) identification of mono- and multi-phosphopeptides, and (c) recognition of tyrosine phosphopeptides. The perovskite introduced into the monolith warrants high selectivity for phosphopeptides even at a high (10,000:1) ratio of non-phosphopeptides to phosphopeptides, and and enables identification of eight mono- and multi-phosphopeptides from standard ß-casein tryptic digests. Tyrosine phosphopeptides were specifically detected via the recognition capability of cucurbit[6]uril integrated into the monolith. The method has remarkably specific enrichment capacity for phosphopeptides from samples including human serum, nonfat milk, and human acute myelocytic leukemia cell lysate. Graphical abstractSchematic representation of a monolith integrated with perovskite and cucurbit[6]uril. The monolithic column was coupled with mass spectrometry and applied to the enrichment of phosphopeptides. The method has remarkably specific enrichment capacity for phosphopeptides from complex biological samples.

Synergistic effect of organic-inorganic hybrid monomer and polyhedral oligomeric silsesquioxanes in a boronate affinity monolithic capillary/chip for enrichment of glycoproteins.

A boronate affinity monolith with improved affinity and selectivity for glycoproteins was prepared starting from two monomers. The first is 3-aminopropyltriethoxysilane-methacrylic acid (APTES-MAA), and the other is a polyhedral oligomeric silsesquioxane (POSS) monomer. In the next step, 3-(acrylamido)benzeneboronic acid was adopted as boronate affinity ligand, and ethylene glycol dimethacrylate as the crosslinker, and iso-propanol and octanol as binary porogens. The synergistic effect of APTES-MAA and POSS warrants good affinity and selectivity for glycoproteins, which results in a number of attractive features including (a) a wide operation pH range (from 5 to 8); (b) higher enrichment factors ranging from 19.3 to 20.6; (c) greater recoveries of glycoproteins between 95.8 and 107.1%; (d) lower relative standard deviations of ≤4.2%. Compared to the corresponding APTES-MAA/POSS-free monolith, the new boronate material had 1.7-fold increased glycoprotein recovery from complex samples. Glycoproteins in 500-fold diluted serum samples can be enriched by the boronate monolith. Graphical abstractSchematic representation of the preparation of 3-aminopropyltriethoxysilane-methacrylic acid/polyhedral oligomeric silsesquioxanes boronate affinity monolith. This sorbent exhibits high selectivity and wide pH operation range for capturing glycopeptides.

A monolithic copolymer prepared from N-(4-vinyl)-benzyl iminodiacetic acid, divinylbenzene and N,N'-methylene bisacrylamide for preconcentration of cadmium(II) and cobalt(II) from biological samples prior to their determination by ICP-MS.

A capillary monolith consisting of poly[N-(4-vinyl)-benzyl iminodiacetic acid-co-divinylbenzene-co-N,N'-methylene bisacrylamide), referred to as poly(VBIDA-DVB-Bis), has been prepared. It is shown to be an efficient sorbent for the enrichment of Co(II) and Cd(II). The two ions are completely retained by the monolith in the pH range from 4.0 to 9.0. The breakthrough curve tests were adopted to evaluate the adsorption performance of the monolith towards Co(II) and Cd(II). A dose-response model was used to describe the breakthrough curves of the two ions at different initial concentrations. The adsorption capacities for Co(II) and Cd(II) are 1.54 and 1.73 mg·m-1 at a concentration level of 2.5 mg·L-1, respectively. The enrichment factor is 100, and the required sample volume is 5 mL. Following elution of the two ions with 0.5 M HNO3, they were quantified by ICP-MS. The limits of detection in a 1 mL sample are 0.35 ng·L-1 for Co(II) and 0.44 ng·L-1 for Cd(II). The method was applied to the determination of Co(II) and Cd(II) in spiked rice, human urine and seawater samples. Graphical abstract Schematic representation of a monolithic copolymer prepared from N-(4-vinyl)-benzyl iminodiacetic acid (VBIDA), divinylbenzene (DVB) and N,N'-methylene bisacrylamide (Bis) and its application for selective capturing of cadmium(II) and cobalt(II) from complex sample matrices prior to their determination by ICP-MS.

Covalent organic framework incorporated chiral polymer monoliths for capillary electrochromatography.

A covalent organic framework, Schiff base network-1 (SNW-1), was synthesized and incorporated into cellulase based poly(glycidyl methacrylate-co-ethylene dimethacrylate) (cellulase@poly(GMA-EDMA-SNW-1)) monolith to afford a novel chiral stationary phase for capillary electrochromatography (CEC). SNW-1 is attractive as a stationary phase for CEC because it not only features high surface areas but also provides conjugate structures and abundant amine groups to give π-π electrostatic stacking and hydrogen bonding property. Incorporation of SNW-1 into monolithic column could improve the column efficiency and increase the interactions between the tested racemates and the stationary phase thus significantly improved their CEC separation. The obtained monoliths were characterized by scanning electron microscopy, elemental analysis and nitrogen adsorption. Moreover, effects of SNW-1 concentration, immobilization pH of cellulase and CEC conditions were also investigated. Under the optimized conditions, the cellulase@poly(GMA-EDMA-SNW-1) monolith exhibited excellent enantioseparation performance for eight pairs of different classes of chiral drugs including ß-blockers, antihistamines and anticoagulants. Satisfactory repeatability was achieved with relative standard deviations for intra-day, inter-day and column-to-column runs less than 4.5%, and batch-to-batch runs less than 6.8%. The experiment results reveal that the combination of the versatile features of monoliths and unique properties of SNW-1 could be a promising strategy for chiral separation.

In situ synthesis of a monolithic material with multi-sized pores and its chromatographic properties for the separation of intact proteins from human plasma.

The fabrication of a monolithic allyl phenoxyacetate-based material was proposed via the in situ radical polymerization using ethylene dimethacrylate as the crosslinker and 2,2'-azobisisobutyronitrile as the initiator within a stainless steel column (50 mm × 4.6 mm i.d.). The effects of the porogen composition, the crosslinker amount and the monomer type on the resulting monoliths were investigated. The morphology of the monoliths was characterized using scanning electron microscopy and a nitrogen adsorption-desorption instrument, and the pore structure was characterized using mercury intrusion porosimetry. The results indicate that the optimized monolith has a micro-, meso- and macro- multi-sized pore structure with a high specific surface area of 260.66 m2 g-1. The resulting monoliths were used as stationary phases for the separation of proteins from bio-samples, including a mixture of six standard proteins, chicken egg whites, snailase and human plasma, using high-performance liquid chromatography. Compared to optimized glycidyl methacrylate-based and styrene-based monolithic columns, the allyl phenoxyacetate-based monolithic column exhibited improved selectivity in the separation of proteins. Furthermore, the present method avoids the masking of highly abundant proteins, such as human serum albumin, immunoglobulin G and human fibrinogen, in the detection of middle- or low-abundance proteins in human plasma. The protein identification results obtained from liquid chromatography/mass spectrometry indicate that the present method is an outstanding method for efficient fractionation of human plasma, which will be especially useful in future plasma proteomics research.