Direct or DNA Extraction-Free Amplification and Quantification of Foodborne Pathogens.

The use of direct nucleic acid amplification of pathogens from food matrices has the potential to reduce time to results over DNA extraction-based approaches as well as traditional culture-based approaches. Here we describe protocols for assay design and experiments for direct amplification of foodborne pathogens in food sample matrices using loop-mediated isothermal amplification (LAMP) and polymerase chain reaction (PCR). The examples provided include the detection of Escherichia coli in milk samples and Salmonella in pork meat samples. This protocol includes relevant reagents and methods including obtaining target sequences, assay design, sample processing, and amplification. These methods, though used for specific example matrices, could be applied to many other foodborne pathogens and sample types.

Streamlined boiling lysis DNA extraction for Gram-positive aquaculture pathogen Streptococcus agalactiae.

Accurate genetic analysis is essential for the detection of pathogens as it necessitates suitable DNA extraction methods tailored to specific microorganisms such as Gram-positive bacteria. This study examined several commercial and simplified DNA extraction methods for their suitability in isothermal downstream applications. Extracted DNA was assessed using spectrophotometry, electrophoresis, polymerase chain reaction (PCR) and loop-mediated isothermal amplification (LAMP) while its stability was inspected after five months of storage. The findings revealed variations in DNA yield, purity and integrity among the extraction methods. While extraction kits demonstrated high yield and purity, the in-house extraction techniques showed incoherent correlation between yield and purity, yet showed promise for a streamlined extraction process. The DNA acquired from all methods yielded positive amplification in PCR and LAMP. DNA extracted by kits exhibits prolonged stability than those obtained via boiling lysis. Both methods offer distinct advantages, with commercial kits providing longer stability and high-quality DNA while boiling lysis stands out for its simplicity, with shorter handling and processing periods. This study emphasizes selecting ideal extraction methods for Streptococcus agalactiae, in the prospect of aquaculture settings. In particular, successful LAMP reaction suggests that boiled extracts are feasible enough for detection, and suited for point-of-care (POC) testing where prompt detection of aquatic pathogens is often critical. Ultimately, the choice of method should be contemplated on a case-by-case basis such as the study goals, intended settings, and type of samples.

Assessment of Skimmed Milk Flocculation for Bacterial Enrichment from Water Samples, and Benchmarking of DNA Extraction and 16S rRNA Databases for Metagenomics.

Water samples for bacterial microbiome studies undergo biomass concentration, DNA extraction, and taxonomic identification steps. Through benchmarking, we studied the applicability of skimmed milk flocculation (SMF) for bacterial enrichment, an adapted in-house DNA extraction protocol, and six 16S rRNA databases (16S-DBs). Surface water samples from two rivers were treated with SMF and vacuum filtration (VF) and subjected to amplicon or shotgun metagenomics. A microbial community standard underwent five DNA extraction protocols, taxonomical identification with six different 16S-DBs, and evaluation by the Measurement Integrity Quotient (MIQ) score. In SMF samples, the skimmed milk was metabolized by members of lactic acid bacteria or genera such as Polaromonas, Macrococcus, and Agitococcus, resulting in increased relative abundance (p < 0.5) up to 5.0 log fold change compared to VF, rendering SMF inapplicable for bacterial microbiome studies. The best-performing DNA extraction protocols were FastSpin Soil, the in-house method, and EurX. All 16S-DBs yielded comparable MIQ scores within each DNA extraction kit, ranging from 61-66 (ZymoBIOMICs) up to 80-82 (FastSpin). DNA extraction kits exert more bias toward the composition than 16S-DBs. This benchmarking study provided valuable information to inform future water metagenomic study designs.

High-Quality Genomic DNA Extraction Protocol for Bacillus and Clostridium Species.

High-quality DNA with sufficient yield is the goal of DNA extraction protocols. We present an optimized, cost-effective method for extracting next-generation sequencing (NGS)-quality genomic DNA from Bacillus and Clostridium species using the chloroform-isoamyl approach. The protocol involves two main procedures: cultivation of the bacteria under appropriate conditions, followed by DNA extraction through cell lysis, phase separation, DNA precipitation, and cleanup. This method has been successfully applied to several hundred strains of Bacillus and Clostridium species in our laboratory, including B. cereus, B. licheniformis, C. sporogenes, and C. tyrobutyricum, demonstrating its efficacy and reliability for producing high-quality DNA that meets NGS quality control standards. © 2024 The Author(s). Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Culturing Bacillus and Clostridium species Basic Protocol 2: DNA extraction © 2024 by John Wiley & Sons, Inc.

Isolation and purification of DNA double-strand break repair intermediates for understanding complex molecular mechanisms.

Branched DNA molecules are key intermediates in the molecular pathways of DNA replication, repair and recombination. Understanding their structural details, therefore, helps to envisage the mechanisms underlying these processes. While the configurations of DNA molecules can be effectively analysed in bulk using gel electrophoresis techniques, direct visualization provides a complementary single-molecule approach to investigating branched DNA structures. However, for microscopic examination, the sample needs to be free from impurities that could obscure the molecules of interest, and free from the bulk of unwanted non-specific DNA molecules that would otherwise dominate the field of view. Additionally, in the case of recombination intermediates, the length of the DNA molecules becomes an important factor to consider since the structures can be spread over a large distance on the chromosome in vivo. As a result, apart from sample purity, efficient isolation of large-sized DNA fragments without damaging their branched structures is crucial for further analysis. These factors are illustrated by the example of DNA double-strand break repair in the bacterium E. coli. In E. coli recombination intermediates may be spread over a distance of 40 kb which constitutes less than 1% of the 4.6 Mb genome. This study reveals ways to overcome some of the technical challenges that are associated with the isolation and purification of large and complex branched DNA structures using E. coli DNA double-strand break repair intermediates. High-molecular weight and branched DNA molecules do not run into agarose gels subjected to electrophoresis. However, they can be extracted from the wells of the gels if they are agarose embedded, by using ß-agarase digestion, filtration, and concentration. Furthermore, a second round of gel electrophoresis followed by purification is recommended to enhance the purity of the specific DNA samples. These preliminary findings may prove to be pioneering for various single-molecule analyses of large and complex DNA molecules of DNA replication, repair and recombination.

A deployable film method to enable replicable sampling of low-abundance environmental microbiomes.

Urbanizing global populations spend over 90% of their time indoors where microbiome abundance and diversity are low. Chronic exposure to microbiomes with low abundance and diversity have demonstrated negative long-term impacts on human health. Sequencing-based analyses of environmental nucleic acids are critical to understanding the impact of the indoor microbiome on human health, however low DNA yields indoors, alongside sample collection and processing inconsistencies, currently challenge study replicability. This study presents a comparative assessment of a novel, passive, easily replicable sampling strategy using polydimethylsiloxane (PDMS) sheets alongside a representative swab-based collection protocol. Deployable, customizable PDMS films designed for whole-sample insertion into standardized extraction kits demonstrated 43% higher DNA yields per sample, and 76% higher yields per cm2 of sampler over swab-based protocols. These results indicate that this accessible, scalable method enables sufficient DNA collection to comprehensively evaluate indoor microbiome exposures and potential human health impacts using smaller, more space efficient samplers, representing an attractive alternative to swab-based collection. In addition, this process reduces the manual steps required for microbiome sampling which could address inter-study variability, transform the current microbiome sampling paradigm, and ultimately benefit the replicability and accessibility of microbiome exposure studies.

Comparison of the oral microbiota of patients with atherosclerosis and healthy controls by denaturing gradient gel electrophoresis.

Oral infections can activate local and systemic inflammation. The inflammatory response plays a main role in atherosclerosis. several studies have reported a relation between oral pathogen infection and Atherosclerosis. Recently it was indicated that some oral microbiome has a significant role in triggering atherosclerosis. Denaturing Gradient Gel Electrophoresis (DGGE) is an acceptable assay for identification of uncultivable bacteria. Therefore, we compared the bacterial population diversity in the oral microbiota between atherosclerosis patients and healthy people. Oral microbiota profiling was performed for 139 individuals including 89 patients with CAD and 50 healthy individuals. After DNA extracted from saliva, PCR products were examined and evaluated using DGGE assay. We found that significant relationship between the increased risk of atherosclerosis and the presence of Actinomyces oris, Enterococcus faecalis, Bacterium strain sulresv, Bacterium Culaenoe, NC4, NC7, and NC5 in atherosclerosis patients and healthy individuals. There was also a significant relationship between reducing the risk of atherosclerosis in the presence of NC3 and Entreococcus munotii in atherosclerosis patients and healthy individuals.  In conclusion, presence of some oral microbiota increases the risk of atherosclerosis and the presence of some oral microbiota reduces the risk, so the oral microbiota should be further examined to determine its potential as a biomarker for atherosclerosis.

Endoprotein-activating DNAzyme assay for nucleic acid extraction- and amplification-free detection of viable pathogenic bacteria.

Pathogenic bacteria in food or environment, can pose threats to public health, highlighting the requirement of tools for rapid and accurate detection of viable pathogenic bacteria. Herein, we report a sequential endoprotein RNase H2-activating DNAzyme assay (termed epDNAzyme) that enables nucleic acid extraction- and amplification-free detection of viable Salmonella enterica (S. enterica). The direct detection allows for a rapid detection of viable S. enterica within 25 min. Besides, the assay, based on sequential reporting strategy, circumvents internal modifications in the DNAzyme's active domain and improve its catalytic activity. The multiple-turnover DNAzyme cutting and the enhanced catalytic activity of DNAzyme render the epDNAzyme assay to be highly sensitive, and enables the detection of 190 CFU/mL and 0.1% viable S. enterica. The assay has been utilized to detect S. enterica contamination in food and clinical samples, indicating its potential as a promising tool for monitoring pathogen-associated biosafety.

Engineering the bacteriophage 80 alpha endolysin as a fast and ultrasensitive detection toolbox against Staphylococcus aureus.

The isolation and identification of pathogenic bacteria from a variety of samples are critical for controlling bacterial infection-related health problems. The conventional methods, such as plate counting and polymerase chain reaction-based approaches, tend to be time-consuming and reliant on specific instruments, severely limiting the effective identification of these pathogens. In this study, we employed the specificity of the cell wall-binding (CBD) domain of the Staphylococcus aureus bacteriophage 80 alpha (80α) endolysin towards the host bacteria for isolation. Amidase 3-CBD conjugated magnetic beads successfully isolated as few as 1 × 102 CFU/mL of S. aureus cells from milk, blood, and saliva. The cell wall hydrolyzing activity of 80α endolysin promoted the genomic DNA extraction efficiency by 12.7 folds on average, compared to the commercial bacterial genomic DNA extraction kit. Then, recombinase polymerase amplification (RPA) was exploited to amplify the nuc gene of S. aureus from the extracted DNA at 37 °C for 30 min. The RPA product activated Cas12a endonuclease activity to cleave fluorescently labeled ssDNA probes. We then converted the generated signal into a fluorescent readout, detectable by either the naked eye or a portable, self-assembled instrument with ultrasensitivity. The entire procedure, from isolation to identification, can be completed within 2 h. The simplicity and sensitivity of the method developed in this study make it of great application value in S. aureus detection, especially in areas with limited resource supply.

Extraction of Genomic DNA from Soil Samples by Polyethylene Glycol-Modified Magnetic Particles via Isopropanol Promotion and Ca2+ Mediation.

Obtaining reliable and informative DNA data from soil samples is challenging due to the presence of interfering substances and typically low DNA yields. In this work, we prepared poly(ethylene glycol)-modified magnetic particles (PEG@Fe3O4) for DNA purification. The particles leverage the facilitative effect of calcium ions (Ca2+), which act as bridges between DNA and PEG@Fe3O4 by coordinating with the phosphate groups of DNA and the hydroxyl groups on the particles. The addition of 2-propanol further enhances this Ca2+-mediated DNA adsorption by inducing a conformational change from the B-form to the more compact A-form of DNA. PEG@Fe3O4 demonstrates a DNA adsorption capacity of 144.6 mg g-1. When applied to the extraction of genomic DNA from soil samples, PEG@Fe3O4 outperforms commercial kits and traditional phenol-chloroform extraction methods in terms of DNA yield and purity. Furthermore, we developed a 16-channel automated DNA extraction device to streamline the process and reduce the extraction time. The successful amplification of target bacterial and fungal amplicons underscores the potential of this automated, device-assisted method for studying soil microbial diversity.

A low-cost and versatile paramagnetic bead DNA extraction method for Mycobacterium ulcerans environmental surveillance.

In Australia, native possums are a major wildlife reservoir for Mycobacterium ulcerans, the causative agent of the neglected tropical skin disease Buruli ulcer (BU). Large-scale possum excreta surveys that use PCR to detect M. ulcerans in 100-1,000 s of excreta specimens are an important tool that can inform geospatial modeling and predict locations of future human BU risk. However, the significant expense of commercial kits used to extract DNA from specimens is a major barrier to routine implementation. Here, we developed a low-cost method for DNA extraction from possum excreta, possum tissue, and pure mycobacterial cultures, using a guanidinium isothiocyanate lysis solution and paramagnetic beads. In a 96-well plate format for high-throughput processing, the paramagnetic bead DNA extraction method was threefold less sensitive but only 1/6 the cost of a commonly used commercial kit. Applied to tissue swabs, the method was fourfold more sensitive and 1/5 the cost of a commercial kit. When used for preparing DNA from pure mycobacterial cultures, the method yielded purified genomic DNA with quality metrics comparable to more lengthy techniques. Our paramagnetic bead method is an economical means to undertake large-scale M. ulcerans environmental surveillance that will directly inform efforts to halt the spread of BU in Victoria, Australia, with potential for applicability in other endemic countries. IMPORTANCE: Buruli ulcer (BU) is a neglected tropical skin disease, with an incidence that has dramatically increased in temperate southeastern Australia over the last decade. In southeastern Australia, BU is a zoonosis with native possums the major wildlife reservoir of the causative pathogen, Mycobacterium ulcerans. Infected possums shed M. ulcerans in their excreta, and excreta surveys using PCR to screen for the presence of pathogen DNA are a powerful means to predict future areas of Buruli ulcer risk for humans. However, excreta surveys across large geographic areas require testing of many thousands of samples. The cost of commercial DNA extraction reagents used for preparing samples for PCR testing can thus become prohibitive to effective surveillance. Here, we describe a simple, low-cost method for extracting DNA from possum excreta using paramagnetic beads. The method is versatile and adaptable to a variety of other sample types including swabs collected from possum tissues and pure cultures of mycobacteria.

Ionic liquid-based aqueous biphasic system as an alternative tool for enhanced bacterial DNA extraction.

BACKGROUND: Developing an alternative and benign method for DNA extraction is imperative due to the high cost and potential harms associated with conventional techniques. Investigation of Ionic liquid (IL) as a solvent for DNA storage and stability revealed the ability of IL to assist DNA processes. IL-based aqueous biphasic system emerges as a comprehensive extraction platform capitalizing on the task-specificity of ILs and the wide applicability of ABS for biomolecule extractions. Therefore, it is beneficial to optimize an IL-based ABS specifically for DNA extraction, taking into account the fundamental interactions between the IL and DNA. RESULTS: The primary objective was to design ABS consisting of Ammonium based ILs, and Potassium phosphate buffer as the salting-out agent for the partitioning of salmon sperm DNA. The analysis focused on optimizing biocompatible anions for the extraction. Moreover, the stability of the DNA in the IL rich phases was analysed to validate the method. The proposed process was then employed for extracting plasmid DNA from bacteria, demonstrating results comparable to those obtained with a commercially available kit. Further validation using agarose gel electrophoresis and transformation of the extracted DNA into E.coli were conducted, producing promising outcomes. Although there is room for improvement in terms of recovery of DNA and reusability of ABS, the described approach is comparable with the conventional one while being cost-effective, and showcases a noticeable and convincing link to eco-friendly processes. SIGNIFICANCE: There is limited literature on IL-based ABS for DNA extraction, and the existing studies predominantly concentrate on systems derived from Cholinium ILs. However, their high hydrophilicity limits the choice of the second-phase forming component to polymers for the formation of ABS. Ammonium ILs efficiently form biphasic systems with various available salting-out agents, and biocompatible anions are introduced to mitigate the toxicity of the ILs.

Isolation and Identification of Lactic Acid Bacteria from Environmental Samples.

Isolation is the first and crucial step to study possible roles of lactic acid bacteria (LAB) in environment, especially in food fermentation. It is also important to use the organisms for further application. LABs are diverse bacterial group and have diverse growth characteristics. Culture condition of LAB is thus varied, and selection of a suitable culture medium is essential for the purposes. Identification is also important step, since certain desirable and undesirable characteristics are shared within species. Identification was classically carried out by phenotypic characteristics but is usually performed for DNA sequence-based approaches. 16S rRNA gene sequencing is generally used for the identification, and sequencing of housekeeping genes is used when needed. In addition, identification based on whole-genome sequence similarities was well established during the last decade. Here, we describe methods for isolation and identification of LAB briefly.

Metrological evaluation of DNA extraction method effects on the bacterial microbiome and resistome in sputum.

Targeted high-throughput sequencing (HTS) has revolutionized the way we look at bacterial communities. It can be used for the species-specific detection of bacteria as well as for the determination of the microbiome and resistome and can be applied to samples from almost any environment. However, the results of targeted HTS can be influenced by many factors, which poses a major challenge for its use in clinical diagnostics. In this study, we investigated the impact of the DNA extraction method on the determination of the bacterial microbiome and resistome by targeted HTS using principles from metrology and diagnostics such as repeatability and analytical sensitivity. Sputum samples spiked with Acinetobacter baumannii, Klebsiella pneumoniae, and Pseudomonas aeruginosa at three different concentrations (103-106 cells/mL) were used. DNA was extracted from each sample on 2 separate days in three replicates each using three different extraction methods based on cetrimonium bromide, magnetic beads, and silica membranes. All three spiked bacteria were detected in sputum, and the DNA extraction method had no significant effect on detection. However, the DNA extraction method had significant effects on the composition of the microbiome and the resistome. The sequencing results were repeatable in the majority of cases. The silica membrane-based DNA extraction kit provided the most repeatable results and the highest diversity of the microbiome and resistome. Targeted HTS has been shown to be a reliable tool for determining the microbiome and resistome; however, the method of DNA extraction should be carefully selected to minimize its impact on the results. IMPORTANCE: High-throughput sequencing (HTS) is one of the crucial new technologies that gives us insights into previously hidden parts of microbial communities. The DNA extraction method is an important step that can have a major impact on the results, and understanding this impact is of paramount importance for their reliable interpretation. Our results are of great value for the interpretation of sputum microbiome and resistome results obtained by targeted HTS. Our findings allow for a more rational design of future microbiome studies, which would lead to higher repeatability of results and easier comparison between different laboratories. This could also facilitate the introduction of targeted HTS in clinical microbiology for reliable identification of pathogenic bacteria and testing for antimicrobial resistance (AMR). As AMR is a major threat to public health, the improved methods for determining AMR would bring great benefits to both the healthcare system and society as a whole.

The microbiota comparative analysis of the characteristics between colorectal adenomatous polyps and normal mucosal intestinal.

OBJECTIVE: The aim of this study is to systematically examine and compare the characteristics distinguishing colorectal adenomatous polyps from normal mucosal intestinal microbiota. METHODS: A total of 30 specimens were obtained from patients diagnosed with colorectal adenomatous polyps (adenoma group) who underwent endoscopic removal at Wenzhou People's Hospital between September 2021 and November 2021. Concurrently, 30 normal mucosal specimens were collected from patients without adenomatous polyps (control group). Subsequently, microbiome total DNA extraction was carried out, followed by PCR amplification targeting the V3-V4 region of the 16S rDNA. High-throughput sequencing was conducted using the Illumina MiSeq platform. Subsequent to sequencing, bioinformatics analysis was used to assess the diversity, composition, and functional aspects of the intestinal microbiota in both study groups. RESULTS: A notable dissimilarity in the microbiota structure was identified, specifically within the transverse colon, between these two groups ( P  < 0.05). Species composition analysis revealed that Escherichia , Fusobacterium , and Bacteroides were predominant bacteria in both groups, with Escherichia and Enterobacter displaying significant differences at the genera level between the control group and the adenoma group ( P  < 0.05). Correlation analysis and functional prediction demonstrated substantial disparities in interactions among dominant intestinal microbial genera within patients from both groups. Additionally, it was discovered that the intestinal microbiomes in patients in the adenoma group exhibited a significantly higher pathogenic potential. CONCLUSION: Upon conducting a comprehensive analysis, it was discerned that the microbiota present in the transverse colon of the control group exhibited distinctive characteristics that may contribute to the maintenance of intestinal health.

Detection of Mycobacterium tuberculosis from tongue swabs using sonication and sequence-specific hybridization capture.

Tongue swabs hold promise as a non-invasive sample for diagnosing tuberculosis (TB). However, their utility as replacements for sputum has been limited by their varied diagnostic performance in PCR assays compared to sputum. The use of silica-based DNA extraction methods may limit sensitivity due to incomplete lysis of Mycobacterium tuberculosis (MTB) cells and co-extraction of non-target nucleic acid, which may inhibit PCR. Specificity may also be compromised because these methods are labor-intensive and prone to cross-contamination. To address these limitations, we developed a sample preparation method that combines sonication for MTB lysis and a sequence-specific MTB DNA capture method using hybridization probes immobilized on magnetic beads. In spiked tongue swabs, our hybridization capture method demonstrated a 100-fold increase in MTB DNA yield over silica-based Qiagen DNA extraction and ethanol precipitation. In a study conducted on clinical samples from South Africa, our protocol had 74% (70/94) sensitivity and 98% (41/42) specificity for detecting active pulmonary TB with sputum Xpert MTB/RIF Ultra as the reference standard. While hybridization capture did not show improved sensitivity over Qiagen DNA extraction and ethanol precipitation, it demonstrated better specificity than previously reported methods and was easier to perform. With integration into point-of-care platforms, these strategies have the potential to help enable rapid non-sputum-based TB diagnosis across key underserved patient populations.

Evaluation of an electricity-independent method for IS2404 Loop-mediated isothermal amplification (LAMP) diagnosis of Buruli ulcer in resource-limited settings.

INTRODUCTION: Buruli ulcer (BU) caused by Mycobacterium ulcerans (MU) is a devastating necrotic skin disease. PCR, recommended for confirmation of BU by WHO, requires an adequately equipped laboratory, therefore often delaying timely diagnosis and treatment of BU patients in remote settings. Loop-mediated isothermal amplification (LAMP) is a PCR-based protocol for isothermal amplification of DNA that has been suggested for diagnosis of BU in low-resource settings. STUDY AIMS AND METHODS: This is an exploratory diagnostic test evaluation study, with an embedded qualitative sub-study. Its aims are two-fold: First, to evaluate a simple rapid syringe-based DNA extraction method (SM) in comparison with a more elaborate conventional DNA extraction method (CM), followed by a LAMP assay targeting IS2404 for the detection of MU, either using a commercially available pocket warmer (pw) or a heat block (hb) for incubation. Second, to complement this by exploring the diagnostic workflow for BU at a community-based health centre in an endemic area in rural Ghana as an example of a potential target setting, using interviews with researchers and health care workers (HCWs). Diagnostic test evaluation results are discussed in relation to the requirements of a target product profile (TPP) for BU diagnosis and the target setting. RESULTS: A protocol using SM for DNA extraction followed by IS2404 PCR (IS2404 PCRSM) was able to identify MU DNA in 73 out of 83 BU clinical specimens submitted for diagnosis. The sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) of IS2404 PCRSM were 90.12%, 100%, 100% and 65.21% respectively, as compared to the reference standard IS2404 PCR in combination with a standard extraction protocol for mycobacterial DNA. Evaluation of the LAMP assay on 64 SM DNA extracts showed a sensitivity, specificity, PPV and NPV of 83.6%, 100%, 100% and 50%, respectively, using either pocket warmer (pwLAMPSM) or heat block (hbLAMPSM) for incubation of the reaction, as compared to the same reference standard. The limit of detection of pwLAMPSM was found to be 30 copies of the IS2404 target. Interview findings explored barriers to BU diagnosis and treatment, including perceptions of the disease, costs, and availability of transport. Participants confirmed that a diagnosis at the PoC, in addition to screening based on clinical criteria, would be advantageous in order to prevent delays and loss to follow-up. DISCUSSION AND CONCLUSIONS: The high diagnostic and analytic accuracy of the pwLAMP, evaluated by us in combination with a syringe-based DNA extraction method, supports its potential use for the rapid detection of MU in suspected BU samples at the community or primary health care level without reliable electricity supply. Further optimization needs include a lysis buffer, evaluation directly at the PoC and/or other sites, assessing staff training requirements and quality control.

Enhanced Extraction of Low-Molecular Weight DNA from Wastewater for Comprehensive Assessment of Antimicrobial Resistance.

Environmental surveillance is recognized as an important tool for assessing public health in the post-pandemic era. Water, in particular wastewater, has emerged as the source of choice to sample pathogen burdens in the environment. Wastewater from open drains and community water treatment plants is a reservoir of both pathogens and antimicrobial resistance (AMR) genes, and frequently comes in contact with humans. While there are many methods of tracking AMR from water, isolating good-quality DNA at high yields from heterogeneous samples remains a challenge. To compensate, sample volumes often need to be high, creating practical constraints. Additionally, environmental DNA is frequently fragmented, and the sources of AMR (plasmids, phages, linear DNA) consist of low-molecular-weight DNA. Yet, few extraction processes have focused on methods for high-yield extraction of linear and low-molecular-weight DNA. Here, a simple method for high-yield linear DNA extraction from small volumes of wastewater using the precipitation properties of polyethylene glycol (PEG) is reported. This study makes a case for increasing overall DNA yields from water samples collected for metagenomic analyses by enriching the proportion of linear DNA. In addition, enhancing low-molecular-weight DNA overcomes the current problem of under-sampling environmental AMR due to a focus on high-molecular-weight and intracellular DNA. This method is expected to be particularly useful when extracellular DNA exists but at low concentrations, such as with effluents from treatment plants. It should also enhance the environmental sampling of AMR gene fragments that spread through horizontal gene transfer.

Optimization of the Method for Isolating Bacterial DNA from the Aboveground Part of Lettuce.

Developing an effective method for isolating bacterial genetic material from plants is a relatively challenging task and often does not yield adequately prepared material for further analyses. Previous studies often overlook connections, primarily focusing on laboratory investigations. With advancements in high-throughput sequencing techniques, we can now revisit and delve deeper into these interactions. Our study focuses on the initial phase of these investigations: genetic material isolation. Extracting bacterial DNA from aboveground plant parts, known as the phyllosphere, poses a significant challenge due to plant-derived contaminants. Existing isolation protocols frequently yield inconsistent results, necessitating continuous refinement and optimization. In our study, we developed an effective isolation protocol employing mechanical-chemical lysis, sonication, and membrane filtration. This approach yielded high-quality DNA at a concentration of 38.08 ng/µL, suitable for advanced sequencing applications. Our results underscore the effectiveness and necessity of these methods for conducting comprehensive microbiological analyses. Furthermore, our research not only lays the groundwork for further studies on lettuce microbiota, but also highlights the potential for utilizing our developed protocol in investigating other plants and their microbiomes.

Using clotted, pelleted blood samples for direct molecular detection of Bartonella spp. in small mammal wildlife surveillance studies.

OBJECTIVE: Bartonella are emerging bacterial zoonotic pathogens. Utilization of clotted blood samples for surveillance of these bacteria in wildlife has begun to supersede the use of tissues; however, the efficacy of these samples has not been fully investigated. Our objective was to compare the efficacy of spleen and blood samples for DNA extraction and direct detection of Bartonella spp. via qPCR. In addition, we present a protocol for improved DNA extraction from clotted, pelleted (i.e., centrifuged) blood samples obtained from wild small mammals. RESULTS: DNA concentrations from kit-extracted blood clot samples were low and A260/A280 absorbance ratios indicated high impurity. Kit-based DNA extraction of spleen samples was efficient and produced ample DNA concentrations of good quality. We developed an in-house extraction method for the blood clots which resulted in apposite DNA quality when compared to spleen samples extracted via MagMAX DNA Ultra 2.0 kit. We detected Bartonella in 9/30 (30.0%) kit-extracted spleen DNA samples and 11/30 (36.7%) in-house-extracted blood clot samples using PCR. Our results suggest that kit-based methods may be less suitable for DNA extraction from blood clots, and that blood clot samples may be superior to tissues for Bartonella detection.