Effect of cuff inflation with lidocaine, saline, and air on tracheal tube cuff pressure during laparoscopic resection of colorectal neoplasms: a randomized clinical trial.

BACKGROUND: Tracheal tube cuff pressure will increase after pneumoperitoneum when the cuff is inflated with air, high pressure can cause tracheal mucosal damage. This prospective trial aimed to assess if inflating with normal saline or lidocaine can prevent increase of tracheal tube cuff pressure and tracheal mucosal damage in laparoscopic surgeries with general anesthesia. Whether changes of tracheal tube cuff transverse diameter (CD) can predict changes of tracheal tube cuff pressure. METHODS: Ninety patients scheduled for laparoscopic resection of colorectal neoplasms under general anesthesia were randomly assigned to groups air (A), saline (S) or lidocaine (L). Endotracheal tube cuff was inflated with room-temperature air in group A (n = 30), normal saline in group S (n = 30), 2% lidocaine hydrochloride injection in group L (n = 30). After intubation, tracheal tube cuff pressure was monitored by a calibrated pressure transducers, cuff pressure was adjusted to 25 cmH2O (T0.5). Tracheal tube cuff pressure at 15 min after pneumoperitoneum (T1) and 15 min after exsufflation (T2) were accessed. CD were measured by ultrasound at T0.5 and T1, the ability of ΔCD (T1-0.5) to predict cuff pressure was accessed. Tracheal mucous injury at the end of surgery were also recorded. RESULTS: Tracheal tube cuff pressure had no significant difference among the three groups at T1 and T2. ΔCD had prediction value (AUC: 0.92 [95% CI: 0.81-1.02]; sensitivity: 0.99; specificity: 0.82) for cuff pressure. Tracheal mucous injury at the end of surgery were 0 (0, 1.0) in group A, 0 (0, 1.0) in group S, 0 (0, 0) in group L (p = 0.02, group L was lower than group A and S, p = 0.03 and p = 0.04). CONCLUSIONS: Compared to inflation with air, normal saline and 2% lidocaine cannot ameliorate the increase of tracheal tube cuff pressure during the pneumoperitoneum period under general anesthesia, but lidocaine can decrease postoperative tracheal mucosa injury. ΔCD measured by ultrasound is a predictor for changes of tracheal tube cuff pressure. TRIAL REGISTRATION: Chinese Clinical Trial Registry, identifier: ChiCTR2100054089, Date: 08/12/2021.

Reproducibility and air gap pockets of 3D-printed brachytherapy applicator placement in high-dose-rate skin cancer.

BACKGROUND AND PURPOSE: This study aimed to investigate the reproducibility of a novel approach using 3D printed brachytherapy applicators for the treatment of skin cancer. Specifically, we aimed to assess the accuracy of applicator placement and to minimize the existence of air gap pockets between the applicator and the patient's skin. MATERIALS AND METHODS: A total of 20 patients plans diagnosed with skin cancer were enrolled in this study. All patients underwent high dose rate (HDR) brachytherapy. To ensure precise applicator placement, patient-specific 3D printed applicators were designed based on individual body and tumor topography, utilizing data obtained from computer tomography (CT) scans. All applicators were fabricated using fused deposition modeling technology. RESULTS: The error in applicator placement was measured and found to be less than 1.0 mm on average, with a standard deviation of 0.9 mm. Additionally, the average error in air gap pockets between the applicator and the patient's skin was 0.4 mm (standard deviation was 0.5 mm). The study demonstrated that the personalized approach of 3D printed brachytherapy applicator placement in skin cancer treatment yielded highly accurate results. The average error of less than 1.0 mm in applicator positioning and the minimal air gap pockets demonstrated the reproducibility and precision of this technique. CONCLUSION: Our study establishes the reproducibility and accuracy of 3D-printed brachytherapy applicator placement in the treatment of skin cancer. This personalized treatment approach offers a highly precise method for delivering radiation therapy, minimizing the risk to adjacent healthy tissues, and enhancing overall patient outcomes.

Optical coupling of individual air-suspended carbon nanotubes to silicon microcavities.

Carbon nanotubes are a telecom band emitter compatible with silicon photonics, and when coupled to microcavities, they present opportunities for exploiting quantum electrodynamical effects. Microdisk resonators demonstrate the feasibility of integration into the silicon platform. Efficient coupling is achieved using photonic crystal air-mode nanobeam cavities. The molecular screening effect on nanotube emission allows for spectral tuning of the coupling. The Purcell effect of the coupled cavity-exciton system reveals near-unity radiative quantum efficiencies of the excitons in carbon nanotubes.

[Diagnostic criteria of death cause from low temperature in air and water established by traditional expert examination methods]. / Diagnosticheskie kriterii prichiny smerti ot deistviya nizkoi temperatury na vozdukhe i v vode, ustanavlivaemye s pomoshch'yu traditsionnykh metodov ekspertnogo issledovaniya.

Death from general hypothermia is one of the leading causes in the structure of violent death in the Russian Federation. OBJECTIVE: To clarify and supplement the complex of differential diagnostic macro- and microscopic signs of a fatal acute general cold trauma received when person is in the air and water. MATERIAL AND METHODS: The conclusions of forensic medical experts on the bodies of people who died from hypothermia in the air and in water (by 150 observations) were analyzed. Methods of descriptive statistics, calculation of the frequency ratio of signs' occurrence were used. RESULTS: The article provides quantitative assessment of occurrence (detection) rate of diagnostically significant signs established with the help of traditional methods of expert examination. A new classification of diagnostic death signs from hypothermia taking into account their differential diagnostic significance and reflecting the conditions of a person's stay in the air and water in the pre-mortem and post-mortem periods, as well as terminal period mechanisms is proposed. CONCLUSION: The established complexes of signs provide an objective basis for determining death cause in non-obvious conditions when cold exposure is expected to be one of the most damaging factors.

Establishing Air-Liquid Interface (ALI) Airway Culture Models for Infectious Disease Research.

Air-liquid interface (ALI) airway culture models serve as a powerful tool to emulate the characteristic features of the respiratory tract in vitro. These models are particularly valuable for studying emerging respiratory viral and bacterial infections. Here, we describe an optimized protocol to obtain the ALI airway culture models using normal human bronchial epithelial cells (NHBECs). The protocol outlined below enables the generation of differentiated mucociliary airway epithelial cultures by day 28 following exposure to air.

Capturing carbon dioxide from air with charged-sorbents.

Emissions reduction and greenhouse gas removal from the atmosphere are both necessary to achieve net-zero emissions and limit climate change1. There is thus a need for improved sorbents for the capture of carbon dioxide from the atmosphere, a process known as direct air capture. In particular, low-cost materials that can be regenerated at low temperatures would overcome the limitations of current technologies. In this work, we introduce a new class of designer sorbent materials known as 'charged-sorbents'. These materials are prepared through a battery-like charging process that accumulates ions in the pores of low-cost activated carbons, with the inserted ions then serving as sites for carbon dioxide adsorption. We use our charging process to accumulate reactive hydroxide ions in the pores of a carbon electrode, and find that the resulting sorbent material can rapidly capture carbon dioxide from ambient air by means of (bi)carbonate formation. Unlike traditional bulk carbonates, charged-sorbent regeneration can be achieved at low temperatures (90-100 °C) and the sorbent's conductive nature permits direct Joule heating regeneration2,3 using renewable electricity. Given their highly tailorable pore environments and low cost, we anticipate that charged-sorbents will find numerous potential applications in chemical separations, catalysis and beyond.

Nanoliter-Scale Sample Preparation for Single-Cell Proteomic Analysis Using Glass-Oil-Air-Droplet Chip.

Single-cell proteomic analyses are of fundamental importance in order to capture biological heterogeneity within complex cell systems' heterogeneous populations. Mass spectrometry (MS)-based proteomics is a promising alternative for quantitative single-cell proteomics. Various techniques are continually evolving to address the challenges of limited sample material, detection sensitivity, and throughput constraints. In this chapter, we describe a nanoliter-scale glass-oil-air-droplet (gOAD) chip engineered for heat tolerance, which combines droplet-based microfluidics and shotgun proteomic analysis techniques to enable multistep sample pretreatment.

Mechanisms of Air Entraining of Proteins in Cementitious Materials.

While few prior studies examined the air-entraining properties of proteins in cementitious materials, the underlying mechanisms of proteins' air entraining and the interactions between proteins and cement have not been studied in the past. The significance of this article is to address this knowledge gap by investigating the effect of proteins on relevant factors that affect air entraining in cement paste and establishing an understanding of the mechanism of air entrainment with proteins. These factors include the surface tension of pore solution, protein adsorption on cement particles, cement paste hydrophobization, and flow of fresh paste. Thirteen different proteins were used to investigate the effect of a wide range of protein characteristics on air entraining. Proteins decreased the pore solution surface tension to different degrees. At low concentrations, the adsorption of proteins on cement particles slightly affected the pore solution surface tension. Protein adsorption on cement particles showed a wide range of adsorption isotherms. Proteins generally increased the flow of paste due to electrostatic repulsion between cement particles because of the adsorption of negatively charged proteins on cement particles, as well as the ball-bearing effect of bubbles in fresh paste. The surface hydrophobicity was increased in pastes with proteins. A detailed microcomputed tomography (micro-CT) analysis showed very different air void microstructures in pastes with various proteins. While a relatively strong correlation was observed between air void porosity and surface hydrophobicity, the correlation between air void porosity and the surface tension of pore solution was weak. This indicates that the accumulation of hydrophobized cement particles on the air bubble in the fresh paste, refered to as the Pickering effect, is the main mechanism of air entraining of proteins in the paste. It was shown that a high air void porosity occurs in an intermediate range of flow.

Electric field-based air nanobubbles (EF-ANBs) irrigation on efficient crop cultivation with reduced fertilizer dependency.

The advent of air nanobubbles (ANBs) has opened up a wide range of commercial applications spanning industries including wastewater treatment, food processing, biomedical engineering, and agriculture. The implementation of electric field-based air nanobubbles (EF-ANBs) irrigation presents a promising approach to enhance agricultural crop efficiency, concurrently promoting environmentally sustainable practices through reducing fertilizer usage. This study investigated the impact of EF-ANBs on the germination and overall growth of agricultural crops in soil. Results indicate a substantial enhancement in both germination rates and plant growth upon the application of EF-ANBs. Notably, the introduction of ANBs led to a significant enhancement in the germination rate of lettuce and basil, increasing from approximately 20% to 96% and from 16% to 53%, respectively over two days. Moreover, the presence of EF-ANBs facilitates superior hypocotyl elongation, exhibiting a 2.8- and a 1.6-fold increase in the elongation of lettuce and basil, respectively, over a six-day observation period. The enriched oxygen levels within the air nanobubbles expedite aerobic respiration, amplifying electron leakage from the electron transport chain (ETC) and resulting in heightened reactive oxygen species (ROS) production, playing a pivotal role in stimulating growth signaling. Furthermore, the application of EF-ANBs in irrigation surpasses the impact of traditional fertilizers, demonstrating a robust catalytic effect on the shoot, stem, and root length, as well as the leaf count of lettuce plants. Considering these parameters, a single fertilizer treatment (at various concentrations) during EF-ANBs administration, demonstrates superior plant growth compared to regular water combined with fertilizer. The findings underscore the synergistic interaction between aerobic respiration and the generation of ROS in promoting plant growth, particularly in the context of reduced fertilizer levels facilitated by the presence of EF-ANBs. This promising correlation holds significant potential in establishing more sustainability for ever-increasing environmentally conscious agriculture.

Prey can detect predators via electroreception in air.

Predators and prey benefit from detecting sensory cues of each other's presence. As they move through their environment, terrestrial animals accumulate electrostatic charge. Because electric charges exert forces at a distance, a prey animal could conceivably sense electrical forces to detect an approaching predator. Here, we report such a case of a terrestrial animal detecting its predators by electroreception. We show that predatory wasps are charged, thus emit electric fields, and that caterpillars respond to such fields with defensive behaviors. Furthermore, the mechanosensory setae of caterpillars are deflected by these electrostatic forces and are tuned to the wingbeat frequency of their insect predators. This ability unveils a dimension of the sensory interactions between prey and predators and is likely widespread among terrestrial animals.

Learning Electronic Polarizations in Aqueous Systems.

The polarization of periodically repeating systems is a discontinuous function of the atomic positions, a fact which seems at first to stymie attempts at their statistical learning. Two approaches to build models for bulk polarizations are compared: one in which a simple point charge model is used to preprocess the raw polarization to give a learning target that is a smooth function of atomic positions and the total polarization is learned as a sum of atom-centered dipoles and one in which instead the average position of Wannier centers around atoms is predicted. For a range of bulk aqueous systems, both of these methods perform perform comparatively well, with the former being slightly better but often requiring an extra effort to find a suitable point charge model. As a challenging test, we also analyze the performance of the models at the air-water interface. In this case, while the Wannier center approach delivers accurate predictions without further modifications, the preprocessing method requires augmentation with information from isolated water molecules to reach similar accuracy. Finally, we present a simple protocol to preprocess the polarizations in a data-driven way using a small number of derivatives calculated at a much lower level of theory, thus overcoming the need to find point charge models without appreciably increasing the computation cost. We believe that the training strategies presented here help the construction of accurate polarization models required for the study of the dielectric properties of realistic complex bulk systems and interfaces with ab initio accuracy.

Integrated mRNA and miRNA analysis reveals the regulatory network of oxidative stress and inflammation in Coilia nasus brains during air exposure and salinity mitigation.

BACKGROUND: Air exposure is an inevitable source of stress that leads to significant mortality in Coilia nasus. Our previous research demonstrated that adding 10‰ NaCl to aquatic water could enhance survival rates, albeit the molecular mechanisms involved in air exposure and salinity mitigation remained unclear. Conversely, salinity mitigation resulted in decreased plasma glucose levels and improved antioxidative activity. To shed light on this phenomenon, we characterized the transcriptomic changes in the C. nasus brain upon air exposure and salinity mitigation by integrated miRNA-mRNA analysis. RESULTS: The plasma glucose level was elevated during air exposure, whereas it decreased during salinity mitigation. Antioxidant activity was suppressed during air exposure, but was enhanced during salinity mitigation. A total of 629 differentially expressed miRNAs (DEMs) and 791 differentially expressed genes (DEGs) were detected during air exposure, while 429 DEMs and 1016 DEGs were identified during salinity mitigation. GO analysis revealed that the target genes of DEMs and DEGs were enriched in biological process and cellular component during air exposure and salinity mitigation. KEGG analysis revealed that the target genes of DEMs and DEGs were enriched in metabolism. Integrated analysis showed that 24 and 36 predicted miRNA-mRNA regulatory pairs participating in regulating glucose metabolism, Ca2+ transport, inflammation, and oxidative stress. Interestingly, most of these miRNAs were novel miRNAs. CONCLUSION: In this study, substantial miRNA-mRNA regulation pairs were predicted via integrated analysis of small RNA sequencing and RNA-Seq. Based on predicted miRNA-mRNA regulation and potential function of DEGs, miRNA-mRNA regulatory network involved in glucose metabolism and Ca2+ transport, inflammation, and oxidative stress in C. nasus brain during air exposure and salinity mitigation. They regulated the increased/decreased plasma glucose and inhibited/promoted antioxidant activity during air exposure and salinity mitigation. Our findings would propose novel insights to the mechanisms underlying fish responses to air exposure and salinity mitigation.

Revealing the pathogenesis of gastric intestinal metaplasia based on the mucosoid air-liquid interface.

BACKGROUND: Gastric intestinal metaplasia (GIM) is an essential precancerous lesion. Although the reversal of GIM is challenging, it potentially brings a state-to-art strategy for gastric cancer therapeutics (GC). The lack of the appropriate in vitro model limits studies of GIM pathogenesis, which is the issue this work aims to address for further studies. METHOD: The air-liquid interface (ALI) model was adopted for the long-term culture of GIM cells in the present work. This study conducted Immunofluorescence (IF), quantitative real-time polymerase chain reaction (qRT-PCR), transcriptomic sequencing, and mucoproteomic sequencing (MS) techniques to identify the pathways for differential expressed genes (DEGs) enrichment among different groups, furthermore, to verify novel biomarkers of GIM cells. RESULT: Our study suggests that GIM-ALI model is analog to the innate GIM cells, which thus can be used for mucus collection and drug screening. We found genes MUC17, CDA, TRIM15, TBX3, FLVCR2, ONECUT2, ACY3, NMUR2, and MAL2 were highly expressed in GIM cells, while GLDN, SLC5A5, MAL, and MALAT1 showed down-regulated, which can be used as potential biomarkers for GIM cells. In parallel, these genes that highly expressed in GIM samples were mainly involved in cancer-related pathways, such as the MAPK signal pathway and oxidative phosphorylation signal pathway. CONCLUSION: The ALI model is validated for the first time for the in vitro study of GIM. GIM-ALI model is a novel in vitro model that can mimic the tissue micro-environment in GIM patients and further provide an avenue for studying the characteristics of GIM mucus. Our study identified new markers of GIM as well as pathways associated with GIM, which provides outstanding insight for exploring GIM pathogenesis and potentially other related conditions.

Air bubble guide for adequacy of ophthalmic viscosurgical device during phacoemulsification.

Phacoemulsification in hard cataracts is a challenge. The use of dispersive ophthalmic viscosurgical devices (OVDs) to protect the endothelium is a routine step in such scenarios. However, as OVD is transparent, it is difficult to spot within the anterior chamber. Therefore, surgeons may not be aware when the OVD coating of the endothelium disappears during surgery. Consequently, there may be too frequent OVD injections, resulting in a waste of resources. On the contrary, the surgeon may fail to inject OVD at an appropriate time, leading to greater endothelial damage. We propose a novel technique of using an air bubble as a guide that helps in identifying the time when OVD disappears from the anterior chamber, thereby suggesting the surgeon to reinject before proceeding further.

Fabrication of 3D engineered intestinal tissue producing abundant mucus by air-liquid interface culture using paper-based dual-layer scaffold.

Fabrication of engineered intestinal tissues with the structures and functions as humans is crucial and promising as the tools for developing drugs and functional foods. The aim of this study is to fabricate an engineered intestinal tissue from Caco-2 cells by air-liquid interface culture using a paper-based dual-layer scaffold and analyze its structure and functions. Just by simply placing on a folded paper soaked in the medium, the electrospun gelatin microfiber mesh as the upper cell adhesion layer of the dual-layer scaffold was exposed to the air, while the lower paper layer worked to preserve and supply the cell culture medium to achieve stable culture over several weeks. Unlike the flat tissue produced using the conventional commercial cultureware, Transwell, the engineered intestinal tissue fabricated in this study formed three-dimensional villous architectures. Microvilli and tight junction structures characteristic of epithelial tissue were also formed at the apical side. Furthermore, compared to the tissue prepared by Transwell, mucus production was significantly larger, and the enzymatic activities of drug metabolism and digestion were almost equivalent. In conclusion, the air-liquid interface culture using the paper-based dual-layer scaffold developed in this study was simple but effective in fabricating the engineered intestinal tissue with superior structures and functions.

PFAS Porewater concentrations in unsaturated soil: Field and laboratory comparisons inform on PFAS accumulation at air-water interfaces.

Poly- and perfluoroalkyl substance (PFAS) leaching from unsaturated soils impacted with aqueous film-forming foams (AFFFs) is an environmental challenge that remains difficult to measure and predict. Complicating measurements and predictions of this process is a lack of understanding between the PFAS concentrations measured in a collected environmental unsaturated soil sample, and the PFAS concentrations measured in the corresponding porewater using field-deployed lysimeters. The applicability of bench-scale batch testing to assess this relationship also remains uncertain. In this study, field-deployed porous cup suction lysimeters were used to measure PFAS porewater concentrations in unsaturated soils at 5 AFFF-impacted sites. Field-measured PFAS porewater concentrations were compared to those measured in porewater extracted in the laboratory from collected unsaturated soil cores, and from PFAS concentrations measured in the laboratory using batch soil slurries. Results showed that, despite several years since the last AFFF release at most of the test sites, precursors were abundant in 3 out of the 5 sites. Comparison of field lysimeter results to laboratory testing suggested that the local equilibrium assumption was valid for at least 3 of the sites and conditions of this study. Surprisingly, PFAS accumulation at the air-water interface was orders of magnitude less than expected at two of the test sites, suggesting potential gaps in the understanding of PFAS accumulation at the air-water interface at AFFF-impacted sites. Finally, results herein suggest that bench-scale testing on unsaturated soils can in some cases be used to inform on PFAS in situ porewater concentrations.

Effect of nanobubble water on medium chain carboxylic acids production in anaerobic digestion of cow manure.

Nanobubble water promotes the degradation of difficult-to-degrade organic matter, improves the activity of electron transfer systems during anaerobic digestion, and optimizes the composition of anaerobic microbial communities. Therefore, this study proposes the use of nanobubble water to improve the yield of medium chain carboxylic acids produced from cow manure by chain elongation. The experiment was divided into two stages: the first stage involved the acidification of cow manure to produce volatile acidic fatty acids as electron acceptors, and the second phase involved the addition of lactic acid as an electron donor for the chain elongation. Three experimental groups were established, and air, H2, and N2 nanobubble water were added in the second stage. Equal amounts of deionized water were added in the control group. The results showed that nanobubble water supplemented with air significantly increased the caproic acid concentration to 15.10 g/L, which was 55.03 % greater than that of the control group. The relative abundances of Bacillus and Caproiciproducens, which are involved in chain elongation, and Syntrophomonas, which is involved in electron transfer, increased. The unique ability of air nanobubble water supplemented to break down the cellulose matrix resulted in further decomposition of the recalcitrant material in cow manure. This effect subsequently increased the number of microorganisms associated with lignocellulose degradation, increasing carbohydrate metabolism and ATP-binding cassette transporter protein activity and enhancing fatty acid cycling pathways during chain elongation. Ultimately, this approach enabled the efficient production of medium chain carboxylic acids.

Physiological basis for atmospheric methane oxidation and methanotrophic growth on air.

Atmospheric methane oxidizing bacteria (atmMOB) constitute the sole biological sink for atmospheric methane. Still, the physiological basis allowing atmMOB to grow on air is not well understood. Here we assess the ability and strategies of seven methanotrophic species to grow with air as sole energy, carbon, and nitrogen source. Four species, including three outside the canonical atmMOB group USCα, enduringly oxidized atmospheric methane, carbon monoxide, and hydrogen during 12 months of growth on air. These four species exhibited distinct substrate preferences implying the existence of multiple metabolic strategies to grow on air. The estimated energy yields of the atmMOB were substantially lower than previously assumed necessary for cellular maintenance in atmMOB and other aerobic microorganisms. Moreover, the atmMOB also covered their nitrogen requirements from air. During growth on air, the atmMOB decreased investments in biosynthesis while increasing investments in trace gas oxidation. Furthermore, we confirm that a high apparent specific affinity for methane is a key characteristic of atmMOB. Our work shows that atmMOB grow on the trace concentrations of methane, carbon monoxide, and hydrogen present in air and outlines the metabolic strategies that enable atmMOB to mitigate greenhouse gases.

Evaluation of degradation efficacy and toxicity mitigation for 4-nitrophenol using argon and air-mixed argon plasma jets.

This paper investigates the effects of argon (Ar) and that of Ar mixed with ambient air (Ar-Air) cold plasma jets (CPJs) on 4-nitrophenol (4-NP) degradation using low input power. The introduction of ambient air into the Ar-Air plasma jet enhances ionization-driven processes during high-voltage discharge by utilizing nitrogen and oxygen molecules from ambient air, resulting in increased reactive oxygen and nitrogen species (RONS) production, which synergistically interacts with argon. This substantial generation of RONS establishes Ar-Air plasma jet as an effective method for treating 4-NP contamination in deionized water (DW). Notably, the Ar-Air plasma jet treatment outperforms that of the Ar jet. It achieves a higher degradation rate of 97.2% and a maximum energy efficiency of 57.3 gkW-1h-1, following a 6-min (min) treatment with 100 mgL-1 4-NP in DW. In contrast, Ar jet treatment yielded a lower degradation rate and an energy efficiency of 75.6% and 47.8 gkW-1h-1, respectively, under identical conditions. Furthermore, the first-order rate coefficient for 4-NP degradation was measured at 0.23 min-1 for the Ar plasma jet and significantly higher at 0.56 min-1 for the Ar-Air plasma jet. Reactive oxygen species, such as hydroxyl radical and ozone, along with energy from excited species and plasma-generated electron transfers, are responsible for CPJ-assisted 4-NP breakdown. In summary, this study examines RONS production from Ar and Ar-Air plasma jets, evaluates their 4-NP removal efficacy, and investigates the biocompatibility of 4-NP that has been degraded after plasma treatment.

Radiographic identification of challenging gastrointestinal tract foreign bodies: a descriptive study of how appearance varies in air versus water to aid interpretation.

OBJECTIVE: To provide veterinarians with updated radiographic descriptions of select radiolucent foreign material in a simulated gastrointestinal environment. SAMPLE: 368 veterinarian respondents from the US. METHODS: An online survey was administered between June 18, 2023, and July 2, 2023, through a private veterinarian-based social media group. Representative commonly ingested foreign bodies were radiographed surrounded by air and water to simulate being within the gastrointestinal tract. Two examiners evaluated and qualified the opacity of the objects for each environment. RESULTS: The private social media group had a total of 3,900 members including veterinarians from all disciplines. A total of 362 small animal veterinarians (9.3% of the group) responded to the study reporting a total of 123 foreign objects that were not causing mechanical obstruction at the time of initial presentation. Sixty-eight foreign bodies were reported greater than or equal to 5 times and grouped as balls (n = 4), food (9), fabric (14), wood (3), soft plastic (14), hard plastic (18), or other (6). Most (98.5% [67/68]) objects were easily identifiable in air. In water, 23.5% (16/68) of the objects were obscured, and 39.7% (27/68) had inversion of the major opacity when compared to the opacity in air. CLINICAL RELEVANCE: The opacity of some ingested radiolucent material can invert relative to air or fluid, which may reflect substantial differences in detection following repositioning. When known dietary indiscretion occurs, radiographing a sample of the material in air and water will improve the accuracy of assessment.