Interfacial Conductor-Modulated Low-Triggered Potential Electrochemiluminescence from Conjugated Polymers for Bioanalysis.

Polyfluorene and its derivatives (PFs) are extremely appealing electrochemiluminescence (ECL) illuminants thanks to their easy modification, high quantum yield, excellent photostability, and nontoxicity, exhibiting great application potential in ECL sensing and imaging. Unfortunately, most reported PFs-based ECL bioanalysis generally exhibited high triggering potential (>1.0 V vs Ag/AgCl), which introduced undesirable electrochemical interference to adversely affect the sensitivity and accuracy of biological analysis. This work innovatively exploited poly(3,4-ethylenedioxythiophene) (PEDOT) as an interfacial conductor to modulate the low ECL triggering potential of poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-{2,1',3}-thiadazole)] (PFBT) nanoparticles (NPs). The unique conductivity of in situ electrodeposited PEDOT promoted electron transfer between PFBT NPs and coreactant tripropylamine (TPrA), negatively shifting the ECL triggering potential of PFBT NPs from +1.22 to +0.78 V. The PFBT NPs/PEDOT coupled the localized hybridization chain reaction (LHCR) circuits to achieve a specific and sensitive ECL detection of malathion (MAL), and a low limit of detection (LOD) of 22 fg/mL was obtained. The interfacial conductor provides inspiration for creating the low ECL triggering potential. PFBT NPs-coupled PEDOT builds a low ECL triggering potential of the PFs-based platform for pesticide residue analysis with low interference and high sensitivity.

Fluoranthene degradation in a persulfate system activated by sulfidated nano zero-valent iron (S-nZVI): performance and mechanisms.

Fluoranthene (FLT) has received mounting focus due to its hazardous properties and frequent occurrence in groundwater. In this study, sulfidated nano zero-valent iron (S-nZVI) was selected as an efficient catalyst for activating persulfate (PS) to degrade FLT. The effects of reagent doses, various water conditions (pH, anions, and humic acid), and the presence of surfactants on FLT degradation were investigated. Radical probe experiments, electron paramagnetic resonance (EPR) spectrum detection, and scavenging tests were performed to identify the major reactive oxygen species (ROS) in the system. The results showed that in the PS/S-nZVI system, 96.2% of FLT was removed within 120 min at the optimal dose of PS = 0.07 mM and S-nZVI = 0.0072 g L-1. S(-II) in the S-nZVI surface layer promoted Fe(II) regeneration. Furthermore, HO• and SO4-• were identified as the main contributors to FLT degradation. The intermediates of FLT degradation were detected by gas chromatograph-mass spectrometry (GC-MS) and a possible FLT degradation pathway was proposed. Finally, the effective degradation of two other common polycyclic aromatic hydrocarbons (PAHs) (naphthalene and phenanthrene) demonstrated the broad-spectrum reactivity of the PS/S-nZVI process. In conclusion, these findings strongly demonstrate that the PS/S-nZVI process is a promising alternative for the remediation of PAH-contaminated groundwater.

Hot Melt Extruded High-Dose Amorphous Solid Dispersions Containing Lumefantrine and Soluplus.

Over the last 15 years, a small number of paediatric artemisinin-based combination therapy products have been marketed. These included Riamet® and Coartem® dispersible tablets, a combination of artemether and lumefantrine, co-developed by the Medicines for Malaria Venture and Novartis. Disappointingly, patient compliance, requirement for high-fat meal, and sporadic drug dissolution behaviours following administration still result in considerable challenges for these products. The first and foremost barrier that needs addressed for successful delivery of the artemether/lumefantrine combination is the poor solubility of lumefantrine within the gastrointestinal fluids. In this work, amorphous solid dispersions of lumefantrine within Soluplus®-based matrices have been manufactured using hot melt extrusion as a potential formulation strategy to achieve enhanced dissolution and apparent solubility. The drug loading capacity of Soluplus® to accommodate amorphous lumefantrine, whilst ensuring improved in-vitro dissolution performance, was investigated. The extrusion process employed a variety of processing parameters, including various temperature profiles and different production scales. The influence of variation in extrusion conditions upon the physical stability of manufactured amorphous solid dispersions was also examined. This allowed for a greater understanding of the role of extrusion processing conditions on the performance of supersaturated amorphous solid dispersions during dissolution and storage. This may allow for the design and manufacture of drug enabled formulations with lower drug dosing and thus a lower risk of adverse effects.

Developing Self-Nanoemulsifying Drug Delivery Systems Comprising an Artemether-Lumefantrine Fixed-Dose Combination to Treat Malaria.

BACKGROUND: Despite attempts to control malaria, poor drug bioavailability means malaria still places enormous pressure on health globally. It has been found that the solubility of highly lipophilic compounds can be enhanced through lipid formulations, e.g., self-emulsifying drug delivery systems (SEDDSs). Thus, quality-by-design and characterization were used to justify the development and determine the feasibility of oral oil-in-water SEDDSs comprising a fixed-dose combination (FDC) of artemether-lumefantrine to treat malaria more effectively without the aid of a fatty meal. These formulations were compared to a commercial product containing the same active compounds. METHODS: Excipient compatibility and spontaneous emulsification capacity of different FDC-excipient combinations were identified by employing isothermal microcalorimetry, solubility, and water titration tests. Pseudoternary phase diagrams were constructed, and checkpoint formulations were selected within the self-emulsification region by reviewing formulation properties essential for optimized drug delivery. SEDDSs capable of enduring phase separation within 24 h were subjected to characterization experiments, i.e., drug concentration determination, cloud point, droplet size, size distribution, self-emulsification time, self-emulsification efficacy, viscosity, zeta potential, and thermodynamic stability analysis. SEDDSs with favorable characteristics were identified in the micro or nano range (SNEDDSs) before being subjected to drug release studies. RESULTS: All final formulations depicted enhanced artemether and lumefantrine release compared to the commercial product, which could not release lumefantrine at a quantifiable concentration in this study. The avocado oil (AVO)4:6 and olive oil (OLV)3:7 SNEDDSs overall portrayed the ideal characteristics and depicted the highest percentage of drug release. CONCLUSIONS: This study offers evidence that SNEDDSs from selected natural oils comprising an artemether-lumefantrine FDC can potentially enhance the bioavailability of these lipophilic drugs.

A broad-spectrum antibacterial hydrogel based on the synergistic action of Fmoc-phenylalanine and Fmoc-lysine in a co-assembled state.

Multicomponent biomolecular self-assembly is fundamental for accomplishing complex functionalities of biosystems. Self-assembling peptides, amino acids, and their conjugates serve as a versatile platform for developing biomaterials. However, the co-assembly of multiple building blocks showing synergistic interplay between individual components and producing biomaterials with emergent functional attributes is much less explored. In this study, we have formulated minimalistic co-assembled hydrogels composed of Fmoc-phenylalanine and Fmoc-lysine. The co-assembled systems display broad-spectrum antimicrobial potency, a feature absent in individual building blocks. A comprehensive biophysical analysis demonstrates the physicochemical features of the hydrogels eliciting the antibacterial response. MD simulation further reveals a unique fibrillar architecture with Fmoc-phenylalanine forming the fibril core surrounded by positively charged Fmoc-lysine surface residues, thereby enhancing the interaction with negatively charged bacterial membranes, causing membrane disruption and cell death. Thus, this study provides molecular-level insight into the emergent properties of a multicomponent system, affording an excellent paradigm for developing novel biomaterials.

A co-assembly process for high strength and injectable dual network gels with sustained doxorubicin release performance.

Adopting a non-covalent co-assembly strategy shows great potential in loading drugs efficiently and safely in drug delivery systems. However, finding an efficient method for developing high strength gels with thixotropic characteristics is still challenging. In this work, by hybridizing the low molecular weight gelator fluorenylmethyloxycarbonyl-phenylalanine (Fmoc-F) (first single network, 1st SN) and alginate (second single network, 2nd SN) into a dual network (DN) gel, gels with high strength as well as thixotropy were prepared efficiently. The DN gels showed high strength (103 Pa in SN gels and 105 Pa in DN gels) and thixotropic characteristics (yield strain <25%; recovery ratio >85% within 100 seconds). The application performance was verified by loading doxorubicin (DOX), showing better encapsulation capacity (77.06% in 1st SN, 59.11% in 2nd SN and 96.71% in DN) and sustained release performance (lasting one week under physiological conditions) than single network gels. Experimental and DFT results allowed the elaboration of the specific non-covalent co-assembly mechanism for DN gel formation and DOX loading. The DN gels were formed by co-assembly driven by H-bond and π-π stacking interactions and then strengthened by Ca2+-coupling. Most DOX molecules co-assembled with Fmoc-F and alginate through π-π stacking and H-bond interactions (DOX-I), with a few free DOX molecules (DOX-II) left. Proven by the release dynamics test, DOX was released through a diffusion-erosion process, in an order of DOX-I first and then DOX-II. This work suggests that non-covalent co-assembly is a useful technique for effective material strengthening and drug delivery.

Thermally Stable and Transparent Polyimide Derived from Side-Group-Regulated Spirobifluorene Unit for Substrate Application.

Advancements in flexible electronic technology, especially the progress in foldable displays and under-display cameras (UDC), have created an urgent demand for high-performance colorless polyimide (CPI). However, current CPIs lack sufficient heat resistance for substrate applications. In this work, four kinds of rigid spirobifluorene diamines are designed, and the corresponding polyimides are prepared by their condensation with 5,5'-(perfluoropropane-2,2-diyl) bis(isobenzofuran-1,3-dione) (6FDA) or 9,9-bis(3,4-dicarboxyphenyl) fluorene dianhydride (BPAF). The rigid and conjugated spirobifluorene units endow the polyimides with higher glass transition temperature (Tg) ranging from 356 to 468 °C. Their optical properties are regulated by small side groups and spirobifluorene structure with a periodically twisted molecular conformation. Consequently, a series of CPIs with an average transmittance ranging from 75% to 88% and a yellowness index (YI) as low as 2.48 are obtained. Among these, 27SPFTFA-BPAF presents excellent comprehensive performance, with a Tg of 422 °C, a 5 wt.% loss temperature (Td5) of 562 °C, a YI of 3.53, and a tensile strength (δmax) of 140 MPa, respectively. The mechanism underlying the structure-property relationship is investigated by experimental comparison and theoretical calculation, and the proposed method provides a pathway for designing highly rigid conjugated CPIs with excellent thermal stability and transparency for photoelectric engineering.

Fmoc Solid-Phase Peptide Synthesis.

Synthetic peptides are important as drugs and in research. Currently, the method of choice for producing these compounds is solid-phase peptide synthesis. Here, we describe the scope and limitations of Fmoc solid-phase peptide synthesis. Furthermore, we provide a detailed protocol for Fmoc peptide synthesis.

Enhanced fluorescence properties of polyfluorene-based polymer dots through an ascorbic acid-photoaging treatment for living cell imaging.

The polymer dots (Pdots) prepared by the conjugated polymer (PFO, poly (9,9-dihexylfluorene-2,7-diyl)) have high fluorescence intensity and are often used in biological fluorescence imaging. However, due to the chain defects, the PFO Pdots suffer from stability issues such as photoinactivation and photobleaching. To solve this problem, we drew inspiration from the preparation process of organic planar light-emitting devices and added an optimization processing after Pdots was prepared. We used illumination as the driving force to activate defects on its chain, and ascorbic acid as a reducing substance to restore the chain defects of the polymer to a more stable state. Through this method, we increased the fluorescence intensity by nearly 1.9 times, and significantly improving their long and short-term stability. In addition, it ensures other properties remain unchanged. This optimization scheme is also fully compatible with the entire biological imaging process, ensuring that other important properties such as cytotoxicity do not undergo unnecessary changes. Furthermore, we conducted material characterization and theoretical simulation, revealing that the optimization scheme mainly serves to repair C-9 alkyl defects on the polyfluorene unit. This study has improved and enhanced the fluorescence performance of PFO Pdots, and also provides a way to optimize the treatment of other similar conjugated polymer material systems.

Characteristics of pollutant generation from 3D-printed photocured waste combustion.

With the rapid advancement of photopolymerization-based 3D printing technology, the volume of PCW has experienced a sharp increase. The potential environmental ramifications of PCW disposal demand careful consideration, especially given its current practice of being incineration alongside MSW. In this study, the TG-MS/FTIR system was carried out to probe the thermogravimetric characteristics and volatile byproducts during combustion. Various product compositions resulting from different mixing ratios of PCW incineration with MSW were investigated. It was observed that fluorene (C13H10) and triphenylene (C18H12) produced by PCW combustion 0.52 mg/g and 0.43 mg/g respectively, which are twice as abundant as those generated from normal plastic. When PCW incineration along with MSW, compounds such as naphthalene (C10H8), cyclohexane (C6H12), and heptane (C7H16) were generated in concentrations of 1.25 mg/g, 1.05 mg/g, and 0.95 mg/g respectively, which are at least twice as much as with MSW incineration alone. The incineration of PCW with rubber and textiles resulted in the production of 2.34 mg/g to 3.76 mg/g more PAHs compared to PCW combustion alone. The incineration of PCW with paper resulted in the production of 3.12 mg/g to 5.15 mg/g more heptane, nonane, cyclohexane, pyrene, and anthracene than PCW combustion alone. Incineration of PCW with wood proved to be the cleanest method, with product contents primarily below 0.10 mg/g. When incinerated with food residues or normal plastic, most of the product content remained below 0.05 mg/g. Considering the environmental pollution resulting from PCW combustion, the disposal of PCW warrants careful consideration and management.

Push-Pull Fluorescent Dyes with Trifluoroacetyl Acceptor for High-Fidelity Sensing of Polarity and Heterogeneity of Lipid Droplets.

Imaging and sensing of lipid droplets (LDs) attracted significant attention due to growing evidence for their important role in cell life. Solvatochromic dyes are promising tools to probe LDs' local polarity, but this analysis is biased by their non-negligible emission from intracellular membranes and capacity to emit from both the apolar core and polar interface of LDs. Here, we developed two push-pull solvatochromic dyes based on naphthalene and fluorene cores bearing an exceptionally strong electron acceptor, the trifluoroacetyl group. The latter was found to boost the optical properties of the dyes by shifting their absorption and emission to red and increasing their extinction coefficient, photostability, and sensitivity to solvent polarity (solvatochromism). In contrast to classical solvatochromic dyes, such as parent aldehydes and reference Nile Red, the new dyes exhibited strong fluorescence quenching by millimolar water concentrations in organic solvents. In live cells, the trifluoroacetyl dyes exhibited high specificity to LDs, whereas the parent aldehydes and Nile Red showed a detectable backgrounds from intracellular membranes. Experiments in model lipid membranes and nanoemulsion droplets confirmed the high selectivity of new probes to LDs in contrast to classical solvatochromic dyes. Moreover, the new probes were found to be selective to the LDs oil core, where they can sense lipid unsaturation and chain length. Their ratiometric imaging in cells revealed strong heterogeneity in polarity within LDs, which covered the range of polarities of unsaturated triglyceride oils, whereas Nile Red failed to properly estimate the local polarity of LDs. Finally, the probes revealed that LDs core polarity can be altered by fatty acid diets, which correlates with their chain length and unsaturation.

Benzo(b)fluoranthene and benzo(k)fluoranthene removal by microalgae in the presence of triazine herbicides: Matrix solid-phase dispersion and solid-phase extraction (MSPD/SPE) for HPLC-UV analysis of the different culture components.

Over the last decade, human activities in the industrial and agricultural sectors have significantly increased the concentration of persistent and harmful pollutants in aquatic ecosystems. The use of microorganisms is a green strategy for the bio-removal of certain contaminants. However, other pollutants in the same ecosystems can reduce their degrading activity and even affect their survival. Therefore, this study aimed to evaluate the efficiency of benzo(b)fluoranthene (BbF) and benzo(k)fluoranthene (BkF) removal by Selenastrum capricornutum in the presence of triazine herbicides, compounds mainly used in broadleaf weeds. The interest of this work focused on identifying in which of the microalgal components the degrading activity is best evidenced and affected. For this purpose, the use of solid-phase extraction (SPE) and matrix solid-phase dispersion (MSPD) extraction procedures and HPLC-UV analysis allowed the BbF and BkF trace quantification in biomass, liquid medium, and cell lysate separately from cultures exposed to these polycyclic aromatic hydrocarbons (PAHs) alone or with herbicides. The recovery percentages were between 78 and 94 %, good linearity (r2 ≈ 0.99), precision values measured as RSD < 15 %, and limits of detection (LOQs) at levels of ng mL-1 and ng mg-1 were obtained. The individual PAH amounts measured in the components of microalgae cultures show similar removal kinetics (removal percentages: 82-89 %). Likewise, the analysis demonstrated that the removal of PAHs is not affected in the presence of triazine herbicides (atrazine and cyanazine) and with similar removal percentages (79-86 %) compared to those cultures exposed to individual PAHs (74-83 %). These results support the possible real-world applications of PAH removal by extracts from S. capricornutum in aquatic environments contaminated with PAHs and near agriculture areas where triazine herbicides are used.

A novel red-to-near-infrared AIE fluorescent probe for detection of Hg2+ with large Stokes shift in plant and living cells.

Due to the highly toxic nature of mercury ions to living organisms, accurately detecting Hg2+ in water samples and biological systems is of great significance. In this study, we designed and synthesized a novel red-to-near-infrared Aggregation-Induced Emission (AIE) fluorescent probe (named as DS) based Fluorene derivatives on specifically for Hg2+ detection. Probe DS can visually identify Hg2+ through an red-to-near-infrared fluorescence enhancement change, characterized by a large Stokes shift (130 nm) and AIE feature. This probe offers a fast response, high selectivity and sensitivity. The Hg2+-induced deprotection reaction of the thioketal mechanism was thoroughly investigated using nuclear magnetic resonance spectroscopy (NMR), mass spectrometry (MS) and density functional theory (DFT) calculation. Additionly, dynamic light scattering (DLS) results indicated that the aggregation states changes of the molecular play a crucial role in the AIE fluorescence response of probe DS toward Hg2+. The red-to-near-infrared response with AIE feature not only avoids the interference of auto-fluorescence signals in complex environments, but also reduces the fluorescence quenching caused by probe molecular aggregation. This makes probe DS highly suitable for high-quality imaging detection of Hg2+ in aqueous environments. Furthermore, probe DS demonstrates the capability for visual fluorescence detection of Hg2+ concentrations in water sample, plant roots and living cells.

Design and synthesis of novel fluorene derivatives as inhibitors of pyruvate dehydrogenase kinase.

Activation of pyruvate dehydrogenase (PDH) by inhibition of pyruvate dehydrogenase kinase (PDHK) has the potential for the treatment of diabetes mellitus and its complications, caused by the malfunction of the glycolytic system and glucose oxidation. In this paper, we describe the identification of novel PDHK inhibitors with a fluorene structure. High-throughput screening using our in-house library provided compound 6 as a weak inhibitor that occupied the allosteric lipoyl group binding site in PDHK2. Structure-based drug design (SBDD) while addressing physicochemical properties succeeded in boosting inhibitory activity approximately 700-fold. Thus obtained compound 32 showed favorable pharmacokinetics profiles supported by high membrane permeability and metabolic stability, and exhibited activation of PDH in rat livers and a glucose lowering effect in Zucker fatty rats.

Development and validation of colorimetric-assisted chemometrics methods based on the localized gold nanoparticles surface plasmon resonance for fast simultaneous estimation of anti-hepatitis C virus drugs in their combined dosage form: A comparative study with HPLC method.

The present work describes a developed analytical method based on a colorimetric assay using gold nanoparticles (AuNPs) along with chemometric techniques for the simultaneous estimation of sofosbuvir (SOF) and ledipasvir (LED) in their synthetic mixtures and tablet dosage form. The applied chemometric approaches were continuous wavelet transform (CWT) and least squares support vector machine (LS-SVM). Characterization of AuNPs and AuNPs in combination with the drug was performed by UV-vis spectrophotometer, transmission electron microscopy (TEM), dynamic light scattering (DLS), and Fourier transform infrared (FTIR) spectroscopy. In the CWT method, the zero amplitudes were determined at 427 nm with Daubechies wavelet family for SOF (zero crossing point of LED) and 440 nm with Symlet wavelet family for LED (zero crossing point of SOF) over the concentration range of 7.5-90.0 µg/L and 40.0-100.0 µg/L with coefficients of determination (R2) of 0.9974 and 0.9907 for SOF and LED, respectively. The limit of detection (LOD) and limit of quantification (LOQ) of this method were found to be 7.92, 9.96 µg/L and 12.02, 30.2 µg/L for SOF and LED, respectively. In the LS-SVM model, the mean percentage recovery of SOF and LED in synthetic mixtures was 98.29 % and 99.25 % with root mean square error of 2.392 and 1.034, which were obtained by the optimization of regularization parameter (γ) and width of the function (σ) based on the cross-validation method. The proposed methods were also applied for the determination concentration of SOF and LED in the combined dosage form, recoveries were higher than 95 %, and relative standard deviation (RSD) values were lower than 0.4 %. The achieved results were statistically compared with those obtained from the high-performance liquid chromatography (HPLC) technique for the concurrent estimation of components through one-way analysis of variance (ANOVA), and no significant difference was found between the suggested approaches and the reference one. According to these results, simplicity, high speed, lack of time-consuming process, and cost savings are considerable benefits of colorimetry along with chemometrics methods compared to other ways.

Dual-signal ratiometric electrochemiluminescence biosensor based on Au NPs-induced low-potential emission of PFO Pdots and LSPR-ECL mechanism for ultra-sensitive detection of microRNA-141.

In this study, we have for the first time constructed a ratiometric ECL biosensor for the ultrasensitive detection of microRNAs (miRNAs) using gold nanoparticles (Au NPs) to trigger both the low-potential emission from conjugated polymer poly(9,9-dioctylfluorene-2,7-diyl) dots (PFO Pdots) and the LSPR-ECL effect with sulfur-doped boron nitride quantum dots (S-BN QDs). PFO Pdots were first applied to the Au NPs-modified electrode, followed by covalent binding to capture the hairpin H1. Immediately thereafter, a small amount of miRNA-141 was able to generate a large amount of output DNA (OP) by traversing the target cycle. OP, H3-S-BN QDs, and H4-glucose oxidase (H4-GOD) were then added sequentially to the Au NPs-modified electrode surface, and the hybridization chain reaction (HCR) was initiated. This resulted in the introduction of a large amount of GOD into the system, which catalyzed the in situ formation of the co-reactant hydrogen peroxide (H2O2) from the substrate glucose. Due to the electron transfer effect, the production of H2O2 led to the ECL quenching of PFO Pdots. Meanwhile, H2O2 served as a co-reactant of S-BN QDs, resulting in strong ECL emission of S-BN QDs at the cathode. Furthermore, the cathodic ECL intensity of S-BN QDs was further enhanced by an LSPR-ECL mechanism between Au NPs and S-BN QDs. By measuring the ratio of ECL intensities at two excitation potentials, this approach could provide sensitive and reliable detection of miRNA-141 in the range of 0.1 fM ∼10 nM, with a detection limit of 0.1 fM.

An optofluidic system for the concentration gradient screening of oocyte protection drugs.

Oocytes protective drug screening is essential for the treatment of reproductive diseases. However, few studies construct the oocyte in vitro drug screening microfluidic systems because of their enormous size, scarcity, and sensitivity to the culture environment. Here, we present an optofluidic system for oocyte drug screening and state analysis. The system consists of two parts: an open-top drug screening microfluidic chip and an optical Fourier filter analysis part. The open-top microfluidic chip anchors single oocyte with hydrogel and allows nutrient and gas environment updating which is essential for oocyte culturing. The optical filter analysis part is used to accurately analyse the status of oocytes. Based on this system, we found that fluorene-9-bisphenol (BHPF) damaged the oocyte spindle in a dose-dependent manner, a high dose of melatonin (10-3 M) effectively reduces the percentage of abnormally arranged chromosomes of oocytes exposed to 40 µM BHPF. This optofluidic system shows great promise for the culture of oocytes and demonstrates the robust ability for convenient multi-concentration oocytes drug screening. This technology may benefit further biomedicine and reproductive toxicology applications in the lab on a chip community.

Conjugated Polymer/Recombinant Escherichia coli Biohybrid Systems for Photobiocatalytic Hydrogen Production.

Biohybrid photocatalysts are composite materials that combine the efficient light-absorbing properties of synthetic materials with the highly evolved metabolic pathways and self-repair mechanisms of biological systems. Here, we show the potential of conjugated polymers as photosensitizers in biohybrid systems by combining a series of polymer nanoparticles with engineered Escherichia coli cells. Under simulated solar light irradiation, the biohybrid system consisting of fluorene/dibenzo [b,d]thiophene sulfone copolymer (LP41) and recombinant E. coli (i.e., a LP41/HydA BL21 biohybrid) shows a sacrificial hydrogen evolution rate of 3.442 mmol g-1 h-1 (normalized to polymer amount). It is over 30 times higher than the polymer photocatalyst alone (0.105 mmol g-1 h-1), while no detectable hydrogen was generated from the E. coli cells alone, demonstrating the strong synergy between the polymer nanoparticles and bacterial cells. The differences in the physical interactions between synthetic materials and microorganisms, as well as redox energy level alignment, elucidate the trends in photochemical activity. Our results suggest that organic semiconductors may offer advantages, such as solution processability, low toxicity, and more tunable surface interactions with the biological components over inorganic materials.

Construction of a novel aminofluorene-based ratiometric near-infrared fluorescence probe for detecting carboxylesterase activity in living cells.

Herein, we constructed a novel aminofluorene-based fluorescence probe (FEN-CE) for the detection of carboxylesterase (CE) in living cells by a ratiometric near-infrared (NIR) fluorescence signal. FEN-CE with NIR emission (650 nm) could be hydrolyzed specifically by CE and transformed to FENH with the release of the self-immolative group, which exhibited a red-shifted emission peak of 680 nm. In addition, FEN-CE showed high selectivity for CE and was successfully used in the detection of CE activity in living cells through its ratiometric NIR fluorescence signals.

A New Fluorene-Based Fluorescent Probe for Recognition of Hypochlorite Ions and its Applications.

Oxidative stress is a trigger for many diseases and occurs with the unstable hypochlorite (ClO-), known as one of the reactive oxygen species (ROS) in organisms. Then, HOCI is acknowledged as an oxidizing species that eliminates a variety of environmental pollutants. Hence, the development of novel methodologies for the selective and precise identification of HOCl/ ClO- is considered to be of utmost importance. In this study, the design, characterization, and applications of a fluorene-based fluorescent probe (FHBP) dependent on the ESIPT mechanism with a "turn-on" response for the sensitive/selective determination of ClO- against other competing samples were reported. The experimental results indicated that the detection limit for ClO-could be quantitatively determined by the probe to be 8.2 × 10-7 M. The binding constant of the probe FHBP with ClO- was computed as 9.75 × 103 M-1. In addition, the response time of FHBP was appointed to be 30 s, indicating a rapid reaction with ClO-. It has also been demonstrated that this probe can be successfully used for the detection of ClO- on filter papers, TLC sheets, cotton swabs, and real samples.