RESUMEN
The development of the iliosacral joint (ISJ) in tetrapods represented a crucial step in the evolution of terrestrial locomotion. This structure is responsible for transferring forces between the vertebral column and appendicular skeleton, thus supporting the bodyweight on land. However, most research dealing with the water-to-land transition and biomechanical studies in general has focused exclusively on the articulation between the pelvic girdle and femur. Our knowledge about the contact between the pelvic girdle and vertebral column (i.e. the ISJ) at a tissue level is restricted so far to human anatomy, with little to no information available on other tetrapods. This lack of data limits our understanding of the development and evolution of such a key structure, and thus on the pattern and processes of the evolution of terrestrial locomotion. Therefore, we investigated the macro- and microanatomy of the ISJ in limb-bearing squamates that, similar to most non-mammalian, non-avian tetrapods, possess only two sacral ribs articulating with the posterior process of the ilium. Using a combination of osteology, micro-computed tomography and histology, we collected data on the ISJ apparatus of numerous specimens, sampling different taxa and different ontogenetic stages. Osteologically, we recorded consistent variability in all three processes of the ilium (preacetabular, supracetabular and posterior) and sacral ribs that correlate with posture and locomotion. The presence of a cavity between the ilium and sacral ribs, abundant articular cartilage and fibrocartilage, and a surrounding membrane of dense fibrous connective tissue allowed us to define this contact as a synovial joint. By comparison, the two sacral ribs are connected to each other mostly by dense fibrous tissue, with some cartilage found more distally along the margins of the two ribs, defining this joint as a combination of a syndesmosis and synchondrosis. Considering the intermediary position of the ISJ between the axial and appendicular skeletons, the shape of the articular surfaces of the sacral ribs and ilium, and the characteristics of the muscles associated with this structure, we argue that the mobility of the ISJ is primarily driven by the movements of the hindlimb during locomotion. We hypothesize that limited torsion of the ilium at the ISJ happens when the hip is abducted, and the joint is likely able to absorb the compressional and extensional forces related to the protraction and retraction of the femur. The mix of fibres and cartilage between the two sacral ribs instead serves primarily as a shock absorber, with the potential for limited vertical translation during locomotion.
Asunto(s)
Cartílago Articular/anatomía & histología , Ilion/anatomía & histología , Lagartos/anatomía & histología , Sacro/anatomía & histología , Animales , Cartílago Articular/diagnóstico por imagen , Cartílago Articular/fisiología , Ilion/diagnóstico por imagen , Ilion/fisiología , Lagartos/fisiología , Locomoción/fisiología , Sacro/diagnóstico por imagen , Sacro/fisiología , Microtomografía por Rayos XRESUMEN
Mesenchymal stem cells (MSCs) obtained from various sources have been used for different therapeutic applications including tissue regeneration. Reamer/irrigator/aspirator (RIA) has been increasingly used in recent years for the derivation of MSCs. Here in this investigation we have comparatively analyzed MSCs obtained from iliac crest bone marrow (ICBM) and RIA for their morphology, cluster determinant (CD) markers, and adipogenic differentiation capacity. MSCs were isolated, cultured, and purified from both sources and then flow cytometric studies were performed to study their characteristics. The differentiation potential of RIA and ICBM was examined by an Oil Red O staining protocol. Moreover, the tissue-specific markers related to adipogenesis were analyzed by real-time polymerase chain reaction (RT-PCR). The cells were cultured in the relevant induction medium and then adipogenic lineage differentiation was tested and confirmed for all MSC preparations. Additionally, analysis by flow cytometer was indicative of RIA derived MSCs (RIA-MSCs) having a more homogenous population than ICBM derived MSCs. The RIA-MSCs differentiation toward adipogenic lineage was more efficient compared with ICBM-MSCs. Direct comparative analysis of RIA to ICBM-MSCs indicated that the RIA-MSCs had a higher potential toward adipocyte lineage differentiation compared with ICBM-MSCs.
Asunto(s)
Adipocitos/fisiología , Diferenciación Celular/fisiología , Linaje de la Célula/fisiología , Células Madre Mesenquimatosas/fisiología , Adipogénesis/fisiología , Células de la Médula Ósea/fisiología , Células Cultivadas , Humanos , Ilion/fisiología , Osteogénesis/fisiologíaRESUMEN
OBJECTIVES: Little is known about how ilium cortical bone responds to loading. Using a mouse model, this study presents data testing the hypothesis that iliac cross-sectional properties are altered in response to increased activity. MATERIALS AND METHODS: The sample derives from lines of High Runner (HR) mice bred for increased wheel-running activity. Four treatment groups of female mice were tested: non-selected control lines housed without (N = 19) and with wheels (N = 20), and HR mice housed without (N = 17) and with wheels (N = 18) for 13 weeks beginning at weaning. Each pelvis was µCT-scanned, cross-sectional properties (cortical area-Ct.Ar, total area-Tt.Ar, polar moment of area, and polar section modulus) were determined from the ilium midshaft, and robusticity indices (ratio of the square root of Ct.Ar or Tt.Ar to caudal ilium length) were calculated. Mixed models were implemented with linetype, wheel access, and presence of the mini-muscle phenotype as fixed effects, replicate line nested within linetype as a random effect, and body mass as a covariate. RESULTS: Results demonstrate that the mouse ilium morphologically resembles a long bone in cross section. Body mass and the mini-muscle phenotype were significant predictors of iliac cross-sectional properties. Wheel access only had a statistically significant effect on Ct.Ar and its robusticity index, with greater values in mice with wheel access. DISCUSSION: These results suggest that voluntary exercise increases cortical area, but does not otherwise strengthen the ilium in these mice, corroborating previous studies on the effect of increased wheel-running activity on femoral and humeral cross-sectional properties in these mice.
Asunto(s)
Hueso Cortical , Ilion , Condicionamiento Físico Animal/fisiología , Carrera/fisiología , Animales , Hueso Cortical/anatomía & histología , Hueso Cortical/fisiología , Femenino , Ilion/anatomía & histología , Ilion/fisiología , Masculino , Ratones , Ratones Endogámicos ICRRESUMEN
A striking feature among jumping frogs is a sharp pelvic bend about the ilio-sacral (IS) joint, unique to anurans. Although this sagittal plane hinge has been interpreted as crucial for the evolution of jumping, its mechanical contribution has not been quantified. Using a model based on Kassina maculata and animated with kinematics from prior experiments, we solved the ground contact dynamics in MuJoCo enabling inverse dynamics without force plate measurements. We altered the magnitude, speed and direction of IS extension (leaving remaining kinematics unaltered) to determine its role in jumping. Ground reaction forces (GRFs) matched recorded data. Prior work postulated that IS rotation facilitates jumping by aligning the torso with the GRF. However, our simulations revealed that static torso orientation has little effect on GRF due to the close proximity of the IS joint with the COM, failing to support the 'torso alignment' hypothesis. Rather than a postural role, IS rotation has a dynamic function whereby angular acceleration (i) influences GRF direction to modulate jump direction and (ii) increases joint loading, particularly at the ankle and knee, perhaps increasing tendon elastic energy storage early in jumps. Findings suggest that the pelvic hinge mechanism is not obligatory for jumping, but rather crucial for the fine tuning of jump trajectory, particularly in complex habitats.
Asunto(s)
Anuros/anatomía & histología , Anuros/fisiología , Locomoción/fisiología , Animales , Fenómenos Biomecánicos , Simulación por Computador , Ilion/fisiología , Sacro/fisiologíaRESUMEN
The facial and long bones have distinct developmental origins, structures, and cellular compositions. This study aimed to compare the in vitro responses of human mandible and long bone osteoblasts to low-magnitude, high-frequency (LMHF) mechanical vibration in terms of expression of mediators of bone remodeling. Osteoblast-like cell cultures were prepared from iliac crest and mandibular bone specimens from three individuals and cultured in osteogenic induction media. Induction of mature osteoblastic phenotypes was confirmed by analysis of DNA content, alkaline phosphatase activity and gene expression every 3 days for 27 days. Based on gene expression, mature osteoblasts formed by day 15 of induction culture. After 15 days of culture in induction media, mature osteoblasts were subjected to vibration (0, 30, or 60 Hz) for 30 min every 24 h. After 48 h, RANKL, OPG, IL-1ß, IL-6 and TGF-ß gene, and protein expression were determined by real-time PCR analysis of total cellular mRNA and ELISAs of the cell supernatants. Both iliac and mandible osteoblasts responded to LMHF vibration: IL-1ß and RANKL mRNA were downregulated and IL-6 mRNA was upregulated. However, TGF- ß mRNA was unaltered and OPG mRNA was upregulated in iliac osteoblasts, whereas both TGF-ß and OPG mRNA were downregulated in mandible osteoblasts. As a result, LMHF reduced the RANKL/OPG mRNA ratio in iliac osteoblasts but did not alter the RANKL/OPG mRNA ratio in mandible osteoblasts. This study suggests mature iliac osteoblasts exhibit a more potent anti-resorptive response to vibration, while this tendency was not obviously apparent in mature mandible osteoblasts.
Asunto(s)
Osteoblastos/metabolismo , Osteoblastos/fisiología , Adulto , Huesos/fisiología , Diferenciación Celular/fisiología , Células Cultivadas , Expresión Génica/genética , Humanos , Ilion/fisiología , Interleucina-1beta/metabolismo , Interleucina-6/metabolismo , Mandíbula/fisiología , Osteogénesis/fisiología , Osteoprotegerina/metabolismo , Cultivo Primario de Células , Ligando RANK/metabolismo , ARN Mensajero/metabolismo , Factor de Crecimiento Transformador beta/metabolismo , Vibración , Adulto JovenRESUMEN
The potential use of bone progenitors, multipotential stromal cells (MSCs) helping spine fusion is increasing, but convenient MSC sources and effective processing methods are critical factors yet to be optimised. The aim of this study was to test the effect of bone marrow processing on the MSC abundance and to compare the differentiation capabilities of vertebral body-bone marrow (VB-BM) MSCs versus iliac crest-bone marrow (IC-BM) MSCs. We assessed the effect of the red blood cell lysis (ammonium chloride, AC) and density-gradient centrifugation (Lymphoprep™, LMP), on the extracted VB-BM and IC-BM MSC numbers. The MSC abundance (indicated by colony counts and CD45lowCD271high cell numbers), phenotype, proliferation and tri-lineage differentiation of VB-BM MSCs were compared with donor-matched IC-BM MSCs. Importantly, the MSC attachment and osteogenesis were examined when VB-BM and IC-BM samples were loaded on a beta-tricalcium phosphate scaffold. In contrast to LMP, using AC yielded more colonies from IC-BM and VB-BM aspirates (p = 0.0019 & p = 0.0201 respectively). For IC-BM and VB-BM, the colony counts and CD45lowCD271high cell numbers were comparable (p = 0.5186, p = 0.2640 respectively). Furthermore, cultured VB-BM MSCs exhibited the same phenotype, proliferative and adipogenic potential, but a higher osteogenic and chondrogenic capabilities than IC-BM MSCs (p = 0.0010 and p = 0.0005 for calcium and glycosaminoglycan (GAG) levels, respectively). The gene expression data confirmed higher chondrogenesis for VB-BM MSCs than IC-BM MSCs, but osteogenic gene expression levels were comparable. When loaded on Vitoss™, both MSCs showed a similar degree of attachment and survival, but a better osteogenic ability was detected for VB-BM MSCs as measured by alkaline phosphatase activity (p = 0.0386). Collectively, the BM processing using AC had more MSC yield than using LMP. VB-BM MSCs have a comparable phenotype and proliferative capacity, but higher chondrogenesis and osteogenesis with or without using scaffold than donor-matched IC-BM MSCs. Given better accessibility, VB-BM could be an ideal MSC source for spinal bone fusion.
Asunto(s)
Células de la Médula Ósea/citología , Diferenciación Celular , Linaje de la Célula , Ilion/citología , Enfermedades de la Columna Vertebral/terapia , Fusión Vertebral/métodos , Columna Vertebral/citología , Células del Estroma/citología , Adolescente , Adulto , Anciano , Células de la Médula Ósea/fisiología , Proliferación Celular , Células Cultivadas , Condrogénesis , Femenino , Humanos , Ilion/fisiología , Masculino , Persona de Mediana Edad , Osteogénesis , Enfermedades de la Columna Vertebral/patología , Columna Vertebral/fisiología , Trasplante de Células Madre , Células del Estroma/fisiología , Adulto JovenRESUMEN
BACKGROUND: Iliac crest bone harvesting is a frequently performed surgical procedure widely used to treat bone defects. The objective of this study is to assess the biomechanical quantities related to risk for pelvic fracture after harvesting an autologous bone graft at the anterior iliac crest. METHODS: Finite element models with a simulated harvest site (sized 15 × 20 mm, 15 × 35 mm, 30 × 20 mm and 30 × 35 mm) in the iliac wing are created. The relevant loading case is when the ipsilateral leg is lifted off the ground. Musculoskeletal analysis is utilized to compute the muscle and joint forces involved in this motion. These forces are used as boundary conditions for the finite element analyses. Bone tissue stress is analyzed. RESULTS: Critical stress peaks are located between the anterior superior iliac spine (ASIS) and the anterior edge of the harvest site. Irrespective of the graft size, the iliac wing does not show any significant stress peaks with the harvest site being 20 to 25 mm posterior to the ASIS. The harvest area itself inhibits the distribution of the forces applied on the ASIS to extend to the posterior iliac wing. This leads to a lack of stress posterior to the harvest site. A balanced stress distribution with no stress peaks appears when the bone graft is taken below the iliac crest. CONCLUSION: A harvest site located at least 20 to 25 mm posterior to the ASIS should be preferred to minimize the risk of iliac fatigue fracture.
Asunto(s)
Hueso Esponjoso/cirugía , Hueso Cortical/cirugía , Fracturas por Estrés/prevención & control , Ilion/cirugía , Recolección de Tejidos y Órganos/métodos , Soporte de Peso , Fenómenos Biomecánicos/fisiología , Trasplante Óseo/efectos adversos , Trasplante Óseo/métodos , Hueso Esponjoso/diagnóstico por imagen , Hueso Esponjoso/trasplante , Hueso Cortical/diagnóstico por imagen , Hueso Cortical/trasplante , Fracturas por Estrés/diagnóstico por imagen , Fracturas por Estrés/etiología , Humanos , Ilion/diagnóstico por imagen , Ilion/fisiología , Recolección de Tejidos y Órganos/efectos adversos , Soporte de Peso/fisiologíaRESUMEN
OBJECTIVE Aggressive sacral tumors often require en bloc resection and lumbopelvic reconstruction. Instrumentation failure and pseudarthrosis remain a clinical concern to be addressed. The objective in this study was to compare the biomechanical stability of 3 distinct techniques for sacral reconstruction in vitro. METHODS In a human cadaveric model study, 8 intact human lumbopelvic specimens (L2-pelvis) were tested for flexion-extension range of motion (ROM), lateral bending, and axial rotation with a custom-designed 6-df spine simulator as well as axial compression stiffness with the MTS 858 Bionix Test System. Biomechanical testing followed this sequence: 1) intact spine; 2) sacrectomy (no testing); 3) Model 1 (L3-5 transpedicular instrumentation plus spinal rods anchored to iliac screws); 4) Model 2 (addition of transiliac rod); and 5) Model 3 (removal of transiliac rod; addition of 2 spinal rods and 2 S-2 screws). Range of motion was measured at L4-5, L5-S1/cross-link, L5-right ilium, and L5-left ilium. RESULTS Flexion-extension ROM of the intact specimen at L4-5 (6.34° ± 2.57°) was significantly greater than in Model 1 (1.54° ± 0.94°), Model 2 (1.51° ± 1.01°), and Model 3 (0.72° ± 0.62°) (p < 0.001). Flexion-extension at both the L5-right ilium (2.95° ± 1.27°) and the L5-left ilium (2.87° ± 1.40°) for Model 3 was significantly less than the other 3 cohorts at the same level (p = 0.005 and p = 0.012, respectively). Compared with the intact condition, all 3 reconstruction groups statistically significantly decreased lateral bending ROM at all measured points. Axial rotation ROM at L4-5 for Model 1 (2.01° ± 1.39°), Model 2 (2.00° ± 1.52°), and Model 3 (1.15° ± 0.80°) was significantly lower than the intact condition (5.02° ± 2.90°) (p < 0.001). Moreover, axial rotation for the intact condition and Model 3 at L5-right ilium (2.64° ± 1.36° and 2.93° ± 1.68°, respectively) and L5-left ilium (2.58° ± 1.43° and 2.93° ± 1.71°, respectively) was significantly lower than for Model 1 and Model 2 at L5-right ilium (5.14° ± 2.48° and 4.95° ± 2.45°, respectively) (p = 0.036) and L5-left ilium (5.19° ± 2.34° and 4.99° ± 2.31°) (p = 0.022). Last, results of the axial compression testing at all measured points were not statistically different among reconstructions. CONCLUSIONS The addition of a transverse bar in Model 2 offered no biomechanical advantage. Although the implementation of 4 iliac screws and 4 rods conferred a definitive kinematic advantage in Model 3, that model was associated with significantly restricted lumbopelvic ROM.
Asunto(s)
Fijadores Internos , Procedimientos Ortopédicos/métodos , Procedimientos de Cirugía Plástica/métodos , Sacro/cirugía , Anciano , Anciano de 80 o más Años , Fenómenos Biomecánicos , Cadáver , Femenino , Humanos , Ilion/fisiología , Ilion/cirugía , Vértebras Lumbares/fisiología , Vértebras Lumbares/cirugía , Masculino , Persona de Mediana Edad , Procedimientos Ortopédicos/instrumentación , Rango del Movimiento Articular , Procedimientos de Cirugía Plástica/instrumentación , Sacro/fisiologíaRESUMEN
The human hip bone is generally accepted as the most reliable bone for sex estimation in forensic and bioarchaeological disciplines. However, it is seldom completely preserved. The best preserved region is typically around the sacroiliac joint and its auricular surface; it is therefore surprising that this surface has not been involved in standard sexing methods. The aim of this study was to explore the shape and size sexual dimorphism of the auricular surface in detail and to compare its sex estimation accuracy using the geometric morphometric (GM) and traditional methodological approach. Our sample consisted of 121 specimens from 3 European osteological collections. The GM part of the study was based on 2D sliding semilandmarks that covered the outline of the auricular surface. Furthermore, several linear measurements and visual features (e.g. auricular surface elevation, postauricular sulcus) were chosen to test sex estimation accuracy using support vector machines. Concerning the GM analysis, the most notable sexual differences in the auricular surface outline relate to size. The best accuracy was achieved using form variables reaching 81.0%. Comparable accuracy (80.2%) was achieved using the metric approach, but combined with visual features the accuracy was increased to 93.4%. The GM approach was not very efficient in sexing the auricular surface outline, but the combination of visual features from the posterior ilium and metric variables of the auricular surface could be useful in sex estimation. Therefore, we provide a further testable linear discriminant equation based on this combination of variables.
Asunto(s)
Cromosomas Humanos Y/genética , Ilion/fisiología , Determinación del Sexo por el Esqueleto/métodos , Antropología Forense/métodos , Humanos , Masculino , Análisis de Componente PrincipalRESUMEN
AIM: Estimation of age at death is a major issue in anthropology. The main anthropological histological methods propose studying the architecture of cortical bone. In bone histomorphometry, researches on metabolic bone diseases have provided normative tables for trabecular bone volume (BV/TV) according to age and gender of individuals on trans-iliac bone biopsies. We have used microCT, a non-destructive tool for measuring bone volume and trabecular descriptors to compare the French tables to a series of forensic anthropological population and if the two iliac bones could be used interchangeably. METHODOLOGY: Coxal bone of a personal forensic collection whose age and gender were known (DNA identification) were used. Bone samples, centered on the same area than bone biopsy. MicroCT (pixel size: 36µm) was used to measure BV/TV and morphometric trabecular parameters of microarchitecture. An adjusted Z-score was calculated for BV/TV to compare with normative tables and a right/left comparison of trabecular parameters was provided. RESULTS: Twenty-seven iliac bones, which 20 forming 10 complete pelvises, aged between 24 and 73y.o. (average of 47.7 y.o.) were used. All adjusted Z-score were within normal values. There was a strong positive correlation between right and left sides for Tb.Th, Tb.N and Tb.Sp, but an insignificant correlation was obtained for BV/TV. CONCLUSION: Normative tables between age and BV/TV are valid and therefore usable in anthropology. They may represent an alternative to determine the age at death. Nevertheless, it requires a precise technique that could be a drawback in current practice.
Asunto(s)
Determinación de la Edad por el Esqueleto/métodos , Hueso Esponjoso/diagnóstico por imagen , Ilion/diagnóstico por imagen , Adulto , Factores de Edad , Anciano , Hueso Esponjoso/fisiología , Femenino , Antropología Forense , Humanos , Ilion/fisiología , Procesamiento de Imagen Asistido por Computador/métodos , Masculino , Persona de Mediana Edad , Factores Sexuales , Microtomografía por Rayos XRESUMEN
Although the anuran pelvis is thought to be adapted for jumping, the function of the iliosacral joint has seen little direct study. Previous work has contrasted the basal "lateral-bender" pelvis from the "rod-like" pelvis of crown taxa hypothesized to function as a sagittal hinge to align the trunk with take-off forces. We compared iliosacral movements and pelvic motor patterns during jumping in the two pelvic types. Pelvic muscle activity patterns, iliosacral anteroposterior (AP) movements and sagittal bending of the pelvis during the take-off and landing phases were quantified in lateral bender taxa Ascaphus (Leiopelmatidae) and Rhinella (Bufonidae) and the rod-like Lithobates (Ranidae). All three species exhibit sagittal extension during take-off, therefore, both pelvic types employ a sagittal hinge. However, trunk elevation occurs significantly earlier in the anuran rod-like pelvis. Motor patterns confirm that the piriformis muscles depress the urostyle while the longissimus dorsi muscles elevate the trunk during take-off. However, the coccygeoiliacus muscles also produce anterior translation of the sacrum on the ilia. A new model illustrates how AP translation facilitates trunk extension in the lateral-bender anurans that have long been thought to have limited sagittal bending. During landing, AP translation patterns are similar because impact forces slide the sacrum from its posterior to anterior limits. Sagittal flexion during landing differs among the three taxa depending on the way the species land. AP translation during landing may dampen impact forces especially in Rhinella in which pelvic function is tuned to forelimb-landing dynamics. The flexibility of the lateral-bender pelvis to function in sagittal bending and AP translation helps to explain the retention of this basal configuration in many anurans. The novel function of the rod-like pelvis may be to increase the rate of trunk elevation relative to faster rates of energy release from the hindlimbs enabling them to jump farther. J. Morphol. 277:1539-1558, 2016. © 2016 Wiley Periodicals, Inc.
Asunto(s)
Anuros/fisiología , Ilion/fisiología , Locomoción/fisiología , Actividad Motora/fisiología , Pelvis/fisiología , Rango del Movimiento Articular , Sacro/fisiología , Animales , Fenómenos Biomecánicos , Electromiografía , Músculo Esquelético/fisiología , Músculos/fisiología , Especificidad de la EspecieRESUMEN
A bone drilling concept, namely osseodensification, has been introduced for the placement of endosteal implants to increase primary stability through densification of the osteotomy walls. This study investigated the effect of osseodensification on the initial stability and early osseointegration of conical and parallel walled endosteal implants in low density bone. Five male sheep were used. Three implants were inserted in the ilium, bilaterally, totaling 30 implants (n=15 conical, and n=15 parallel). Each animal received 3 implants of each type, inserted into bone sites prepared as follows: (i) regular-drilling (R: 2mm pilot, 3.2mm, and 3.8mm twist drills), (ii) clockwise osseodensification (CW), and (iii) counterclockwise (CCW) osseodensification drilling with Densah Bur (Versah, Jackson, MI, USA): 2.0mm pilot, 2.8mm, and 3.8mm multi-fluted burs. Insertion torque as a function of implant type and drilling technique, revealed higher values for osseodensification relative to R-drilling, regardless of implant macrogeometry. A significantly higher bone-to-implant contact (BIC) for both osseodensification techniques (p<0.05) was observed compared to R-drilling. There was no statistical difference in BIC as a function of implant type (p=0.58), nor in bone-area-fraction occupancy (BAFO) as a function of drilling technique (p=0.22), but there were higher levels of BAFO for parallel than conic implants (p=0.001). Six weeks after surgery, new bone formation along with remodeling sites was observed for all groups. Bone chips in proximity with the implants were seldom observed in the R-drilling group, but commonly observed in the CW, and more frequently under the CCW osseodensification technique. In low-density bone, endosteal implants present higher insertion torque levels when placed in osseodensification drilling sites, with no osseointegration impairment compared to standard subtractive drilling methods.
Asunto(s)
Densidad Ósea , Ilion/fisiología , Oseointegración , Prótesis e Implantes , Animales , Interfase Hueso-Implante , Masculino , Osteotomía , Ovinos , TorqueRESUMEN
There is little information on the effects of combination therapy for osteoporosis at the tissue level. Using quadruple tetracycline-labeled bone biopsies, we have compared the bone formation response to teriparatide (TPTD) in treatment-naïve subjects (Rx-Naïve) and in subjects on prior and ongoing alendronate (ALN) treatment (ALN-Rx). Three bone envelopes were analyzed: cancellous, endocortical, and intracortical. TPTD was given as a standard, continuous daily injection or as a cyclic regimen (3 months on daily TPTD, 3 months off, 3 months on daily TPTD). Subjects were biopsied at 7 weeks and at 7 months to allow comparison of the bone formation response to the first and second cycles of TPTD. Baseline values for dynamic bone formation indices were lower in ALN-Rx than Rx-Naïve subjects. Both Rx-Naïve and ALN-RX subjects responded to TPTD with significant increases in bone formation indices at both time points. With cyclic TPTD treatment, the first and second cycles of TPTD stimulated bone formation rate in the cancellous and endocortical envelopes to a similar extent in ALN-Rx and Rx-Naïve subjects. However, in Rx-Naïve patients, bone formation rate (BFR/BS) was higher in patients receiving daily treatment compared with those receiving cyclic TPTD treatment in all three envelopes in the 7-month biopsies. This suggests that the cyclic approach does not provide a skeletal benefit in treatment-naive patients. In the 7-month biopsies, cortical porosity was higher in the Rx-Naïve group receiving daily TPTD than in all other groups. These data provide supporting evidence at the tissue level for previous biochemical and densitometric data suggesting that addition of either cyclic or daily TPTD to ongoing ALN treatment may be an effective approach for patients with severe osteoporosis already treated with ALN who remain at high risk of fracture. © 2016 American Society for Bone and Mineral Research.
Asunto(s)
Alendronato/farmacología , Ilion/fisiología , Osteogénesis/efectos de los fármacos , Teriparatido/farmacología , Hueso Esponjoso/efectos de los fármacos , Estudios de Casos y Controles , Hueso Cortical/efectos de los fármacos , Demografía , Esquema de Medicación , Femenino , Humanos , Ilion/efectos de los fármacos , Persona de Mediana Edad , PorosidadRESUMEN
The Smoky Hill Member of the Niobrara Chalk in Kansas (USA) has yielded the remains of numerous members of the Hesperornithiformes, toothed diving birds from the late Early to Late Cretaceous. This study presents a new taxon of hesperornithiform from the Smoky Hill Member, Fumicollis hoffmani, the holotype of which is among the more complete hesperornithiform skeletons. Fumicollis has a unique combination of primitive (e.g. proximal and distal ends of femur not expanded, elongate pre-acetabular ilium, small and pyramidal patella) and derived (e.g. dorsal ridge on metatarsal IV, plantarly-projected curve in the distal shaft of phalanx III:1) hesperornithiform characters, suggesting it was more specialized than small hesperornithiforms like Baptornis advenus but not as highly derived as the larger Hesperornis regalis. The identification of Fumicollis highlights once again the significant diversity of hesperornithiforms that existed in the Late Cretaceous Western Interior Seaway. This diversity points to the existence of a complex ecosystem, perhaps with a high degree of niche partitioning, as indicated by the varying degrees of diving specializations among these birds.
Asunto(s)
Aves/anatomía & histología , Dinosaurios/anatomía & histología , Buceo/fisiología , Fósiles , Filogenia , Distribución Animal/fisiología , Animales , Biodiversidad , Aves/clasificación , Aves/fisiología , Carbonato de Calcio , Dinosaurios/clasificación , Dinosaurios/fisiología , Ecosistema , Extinción Biológica , Fémur/anatomía & histología , Fémur/fisiología , Ilion/anatomía & histología , Ilion/fisiología , Kansas , Huesos Metatarsianos/anatomía & histología , Huesos Metatarsianos/fisiología , Rótula/anatomía & histología , Rótula/fisiología , Diente/anatomía & histología , Diente/fisiologíaRESUMEN
BACKGROUND: When spinal kyphosis increases, the compensatory mechanism activates and the pelvic position changes. Increasing the pelvic tilt, which is the orientation of the pelvis with respect to the femoral head, is known to associate with the clinical symptoms in kyphosis in the aging population. It is often difficult to detect the femoral head on radiographs, limiting the ability to determine the pelvic tilt. Therefore, there is a need to establish another parameter independent of the femoral head which closely correlates with the pelvic tilt. METHODS: Eighty-two adult patients with full-length lateral standing spine radiographs were recruited (mean age: 73.0 years). A new parameter, the iliac cortical density line (a component of the arcuate line of the ilium) and the iliac tilt (defined as the angle between the iliac cortical density line and the vertical), was analyzed to determine the correlation with the pelvic tilt. RESULTS: Both the pelvic tilt (PT) and iliac tilt (IT) could be identified in 67 patients, and a significant correlation was observed between the PT and IT (r = 0.86, P < 0.0001). The PT could be estimated using the following formula: PT = IT - 12.9 (in females), PT = IT - 16.7 (in males). CONCLUSIONS: The iliac tilt, which can be easily and directly measured using the iliac cortical density line, is a new parameter that can reliably estimate the pelvic tilt even when the femoral head is not detectable on the radiograph.
Asunto(s)
Cabeza Femoral/diagnóstico por imagen , Cabeza Femoral/fisiología , Ilion/diagnóstico por imagen , Ilion/fisiología , Postura/fisiología , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Masculino , Persona de Mediana Edad , Huesos Pélvicos/diagnóstico por imagen , Huesos Pélvicos/fisiología , Radiografía , Estudios Retrospectivos , Rayos XRESUMEN
BACKGROUND: Although autogenous bone grafts as well as several bone graft substitute material have been used for some time, there is high demand for more efficient and less costly bone-substitute materials. Silicon-substituted calcium phosphates (Si-CaP) and fine particulate bone powder (FPBP) preparations have been previously shown to individually possess many of the required features of a bone graft substitute scaffold. However, when applied individually, these two materials fall short of an ideal substitute material. We investigated a new concept of combining Si-CaP with FPBP for improved performance in bone-repair. METHODS: We assessed Si-CaP/FPBP combined grafts in vitro, by measuring changes in pH, weight loss, water absorption and compressive strength over time. RESULTS: Si-CaP/FPBP combined grafts was found to produce conditions of alkaline pH levels compared to FPBP, and scaffold surface morphology conducive to bone cell adhesion, proliferation, differentiation, tissue growth and transport of nutrients, while maintaining elasticity and mechanical strength and degradation at a rate closer to osteogenesis. CONCLUSION: Si-CaP/FPBP combined grafts was found to be superior to any of the two components individually.
Asunto(s)
Sustitutos de Huesos/química , Sustitutos de Huesos/farmacología , Trasplante Óseo , Fosfatos de Calcio/química , Ilion/fisiología , Regeneración/efectos de los fármacos , Silicio/química , Absorción Fisicoquímica , Animales , Fuerza Compresiva , Concentración de Iones de Hidrógeno , Ilion/citología , Ilion/efectos de los fármacos , Peso Molecular , Osteogénesis/efectos de los fármacos , Polvos , Conejos , Factores de Tiempo , Agua/químicaRESUMEN
Anterior superior iliac spine (ASIS) marker occlusion commonly occurs during three-dimensional (3-D) motion capture of dynamic tasks with deep hip flexion. The purpose of this study was to validate a universal technique to correct ASIS occlusion. 420 ms of bilateral ASIS marker occlusion was simulated in fourteen drop vertical jump (DVJ) trials (n=14). Kinematic and kinetic hip data calculated for pelvic segments based on iliac crest (IC) marker and virtual ASIS (produced by our algorithm and a commercial virtual join) trajectories were compared to true ASIS marker tracking data. Root mean squared errors (RMSEs; mean±standard deviation) and intra-class correlations (ICCs) between pelvic tracking based on virtual ASIS trajectories filled by our algorithm and true ASIS position were 2.3±0.9° (ICC=0.982) flexion/extension, 0.8±0.2° (ICC=0.954) abduction/adduction for hip angles, and 0.40±0.17 N m (ICC=1.000) and 1.05±0.36 N m (ICC=0.998) for sagittal and frontal plane moments. RMSEs for IC pelvic tracking were 6.9±1.8° (ICC=0.888) flexion/extension, 0.8±0.3° (ICC=0.949) abduction/adduction for hip angles, and 0.31±0.13 N m (ICC=1.00) and 1.48±0.69 N m (ICC=0.996) for sagittal and frontal plane moments. Finally, the commercially-available virtual join demonstrated RMSEs of 4.4±1.5° (ICC=0.945) flexion/extension, 0.7±0.2° (ICC=0.972) abduction/adduction for hip angles, and 0.97±0.62 N m (ICC=1.000) and 1.49±0.67 N m (ICC=0.996) for sagittal and frontal plane moments. The presented algorithm exceeded the a priori ICC cutoff of 0.95 for excellent validity and is an acceptable tracking alternative. While ICCs for the commercially available virtual join did not exhibit excellent correlation, good validity was observed for all kinematics and kinetics. IC marker pelvic tracking is not a valid alternative.
Asunto(s)
Movimiento , Algoritmos , Fenómenos Biomecánicos , Humanos , Ilion/fisiología , Modelos Biológicos , Columna Vertebral/fisiologíaRESUMEN
Treatment and reconstruction of large bone defects, delayed unions, and nonunions is challenging and has resulted in an ongoing search for novel tissue-engineered therapies. Bone morphogenetic protein-2 (BMP-2) gene therapy is a promising strategy to provide sustained production of BMP-2 locally. Alginate polymer-based nonviral gene therapy with BMP-2 plasmid DNA (pBMP-2) in constructs with multipotent mesenchymal stromal cells (MSCs) has resulted in prolonged gene expression and bone formation in vivo. To further translate this technology toward larger animal models, important issues remain to be investigated, such as the necessity of seeded cells as a target for gene therapy. For that purpose, a large animal-screening model in an orthotopic location, with fully separated chambers, was investigated. Four cylinder-shaped implants were placed in the iliac crests of ten goats. Polycaprolactone tubes around each implant allowed bone ingrowth from the underlying bone and bone marrow and ensured separation of the experimental conditions. An empty tube showed low levels of spontaneous bone ingrowth, and implantation of autologous bone indicated proper bone function with respect to remodeling and resorption. Control ceramic scaffolds were compared to scaffolds containing pBMP-2 either or not combined with seeded MSCs. Fluorochrome incorporation evaluated at 3, 6, and 9 weeks and histomorphometry at 12 weeks after implantation revealed clear differences between the groups, with pBMP-2 combined with MSCs being the most effective. The BMP-2 was demonstrated in a variety of bone-residing cells through immunohistochemistry. Further analysis indicated that multinucleated giant cells might have an important role in transgene expression. Taken together, this work introduces a large animal model for studying bone formation at multiple sites simultaneously in an orthotopic location. The model appeared robust, showed no neighboring effects, and demonstrated effectivity of combined cell and gene therapy.
Asunto(s)
Proteína Morfogenética Ósea 2/farmacología , Terapia Genética , Ilion/fisiología , Osteogénesis/efectos de los fármacos , Factor de Crecimiento Transformador beta/farmacología , Animales , Femenino , Cabras , Humanos , Ilion/efectos de los fármacos , Ilion/cirugía , Implantes Experimentales , Modelos Animales , Proteínas Recombinantes/farmacología , Transgenes , VirusRESUMEN
BACKGROUND: Ossification of the calcaneal apophysis has never been fully characterized. We examined the ossification sequence of the calcaneus in relation to ossification of the iliac apophysis and the timing of the peak height velocity (PHV). METHODS: Ninety-four healthy children (forty-nine girls and forty-five boys), from three to eighteen years old, were followed longitudinally through growth with annual serial radiographs and physical examinations. These were done at least annually from ten to fifteen years of age. The PHV was calculated using the height measurements of each child. We measured and compared calcaneal and iliac crest apophyseal ossification using foot and pelvic radiographs made on the same day. We correlated the PHV with the degree of calcaneal and iliac ossification. RESULTS: Ossification of the calcaneal apophysis occurred in an orderly fashion, with the ossification center first appearing a mean of 4.7 years (95% confidence interval [CI], 5.2 to 4.2 years) before the PHV. The apophysis spread across the plantar surface more quickly than the dorsal surface. The apophysis extended completely over the plantar surface a mean of 0.86 year (95% CI, 1.0 to 0.7 year) before the PHV. Fusion of the apophysis followed complete plantar extension over the next two years and was typically complete a mean of 2.1 years (95% CI, 2.0 to 2.2 years) after the PHV. Fusion began in the middle of the apophysis and proceeded outward. Iliac apophyseal ossification did not appear prior to the PHV in any subject. CONCLUSIONS: The calcaneal apophysis ossifies in a consistent fashion characterized by six different stages. The calcaneal stages occur during narrow intervals in relation to the PHV, allowing the calcaneal system to be used for assessment of skeletal maturity. The PHV occurs prior to iliac ossification, whereas the calcaneal apophysis has four stages of ossification before and two stages after the PHV.
Asunto(s)
Determinación de la Edad por el Esqueleto/métodos , Estatura/fisiología , Calcáneo/diagnóstico por imagen , Ilion/diagnóstico por imagen , Osteogénesis/fisiología , Adolescente , Calcáneo/fisiología , Niño , Preescolar , Femenino , Humanos , Ilion/fisiología , Estudios Longitudinales , MasculinoRESUMEN
BACKGROUND: Hybrid implants are thought to offer good stability and bone-implant contact. PURPOSE: This study sought to evaluate the primary stability of a hybrid implant compared with tapered and cylindrical implants in an ex vivo model and compare undersized drilling with standard drilling in attaining primary stability. MATERIALS AND METHODS: Hybrid (Straumann® Bone Level; BL), tapered (Straumann® Tapered Effect; TE), and cylindrical (Straumann® Standard Plus; SP) implants were inserted into 15 mm-thick porcine iliac crest blocks using standard (corticocancellous or cancellous bone) or undersized (cancellous bone only) drilling (n = 7). Stability was evaluated using maximum insertion torque (MIT), implant stability quotient (ISQ), and push-out tests. RESULTS: The mean MIT for BL and TE was significantly higher than that for SP (p < 0.05). With standard drilling in corticocancellous bone, the mean ISQ for TE was significantly higher than that for SP (p < .05). The mean MIT, ISQ, and push-out test scores for BL, TE, and SP with standard drilling in corticocancellous bone were significantly higher than those with undersized or standard drilling in cancellous bone (p < .05). CONCLUSIONS: In this ex vivo model, the hybrid implant demonstrated promising primary stability compared with the cylindrical implant. The improved stability of the hybrid implant was especially evident in cancellous bone. The influence of the cortical layer should be recognized when selecting implants for primary stability.