RESUMEN
Biofilms are groups of microorganisms protected by self-secreted extracellular substances. Biofilm formation on the surface of biomaterial or engineering materials becomes a severe challenge. It has caused significant health, environmental, and societal concerns. It is believed that biofilms lead to life-threatening infection, medical implant failure, foodborne disease, and marine biofouling. To address these issues, tremendous effort has been made to inhibit biofilm formation on materials. Biofilms are extremely difficult to treat once formed, so designing material and coating bearing functional groups that are capable of resisting biofilm formation has attracted increasing attention for the last two decades. Many types of antibiofilm strategies have been designed to target different stages of biofilm formation. Development of the antibiofilm material can be classified into antifouling material, antimicrobial material, fouling release material, and integrated antifouling/antimicrobial material. This review summarizes relevant research utilizing these four approaches and comments on their antibiofilm properties. The feature of each method was compared to reveal the research trend. Antibiofilm strategies in fundamental research and industrial applications were summarized.
Asunto(s)
Antiinfecciosos , Biopelículas , Incrustaciones Biológicas , Biopelículas/efectos de los fármacos , Biopelículas/crecimiento & desarrollo , Incrustaciones Biológicas/prevención & control , Antiinfecciosos/farmacología , Antiinfecciosos/química , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Antibacterianos/farmacología , Antibacterianos/químicaRESUMEN
Ultrafiltration technology, separating water from impurities by the core membrane, is an effective strategy for treating wastewater to meet the ever-growing requirement of clean and drinking water. However, the similar nature of hydrophobic organic pollutants and the membrane surface leads to severe adsorption and aggregation, resulting unavoidable membrane degradation of penetration and rejection. The present study presents a novel block amphiphilic polymer, polyethersulfone-g-carboxymethyl chitosan@MWCNT (PES-g-CMC@MWCNT), which is synthesized by grafting hydrophobic polyethersulfone to hydrophilic carboxymethyl chitosan in order to suspend CMC in organic solution. A mixture of hydrophilic carboxymethyl chitosan and hydrophobic polymers (polyethersulfone), in which hydrophilic segments are bonded to hydrophobic segments, could provide hydrophilic groups, as well as gather and remain stable on membrane surfaces by their hydrophobic interaction for improved compatibility and durability. The resultant ultrafiltration membranes exhibit high water flux (198.10 L m-2·h-1), suitable hydrophilicity (64.77°), enhanced antifouling property (82.96%), while still maintains excellent rejection of bovine serum albumin (91.75%). There has also been an improvement in membrane cross-sectional morphology, resulting in more regular pores size (47.64 nm) and higher porosity (84.60%). These results indicate that amphiphilic polymer may be able to significantly promote antifouling and permeability of ultrafiltration membranes.
Asunto(s)
Quitosano , Interacciones Hidrofóbicas e Hidrofílicas , Membranas Artificiales , Polímeros , Sulfonas , Ultrafiltración , Polímeros/química , Quitosano/química , Quitosano/análogos & derivados , Sulfonas/química , Adsorción , Purificación del Agua/métodos , Incrustaciones Biológicas/prevención & controlRESUMEN
Marine antibiofouling using low-amplitude electric pulses (EP) is an energy-efficient and eco-friendly approach, but potential mechanisms for preventing biofouling remain unclear. In the present study, the 3D adhesion dynamics of a model microorganismâPseudomonas aeruginosa (PAO1)âunder low-amplitude cathodic EP were examined as a function of applying voltage and its duration (td). The results demonstrated that adhered bacteria escaped from the electrode surface even when EP was removed. The escaped bacteria ratio, induction period of escape, and duration of the detachment were influenced profoundly by EP amplitude but slightly by td when td ≥ 5 min. The acceleration of escaped PAO1 from the surface indicated that their flagellar motor was powered by EP. Particularly, EP enabled swimming bacteria to have adaptive motions that were sustainable and regulated by the gene rsmA. As a result, they had less accumulation near the surface. The propulsion of adhered bacteria and adaptive escape of swimming bacteria were enhanced in response to low-amplitude EP. Hence, low-amplitude and short-duration EP is promising for sustainable antibiofouling applications.
Asunto(s)
Adhesión Bacteriana , Pseudomonas aeruginosa , Pseudomonas aeruginosa/fisiología , Electrodos , Electricidad , Incrustaciones Biológicas/prevención & controlRESUMEN
Biosensors based on immobilized antibodies require molecular strategies that (i) couple the antibodies in a stable fashion while maintaining the conformation and functionality, (ii) give outward orientation of the paratope regions of the antibodies for good accessibility to analyte molecules in the biofluid, and (iii) surround the antibodies by antibiofouling molecules. Here, we demonstrate a method to achieve oriented coupling of antibodies to an antifouling poly(l-lysine)-grafted-poly(ethylene glycol) (PLL-g-PEG) substrate, using glycan remodeling to create antibody-DNA conjugates. The coupling, orientation, and functionality of the antibodies were studied using two analysis methods with single-molecule resolution, namely single-molecule localization microscopy and continuous biosensing by particle motion. The biosensing functionality of the glycan-remodeled antibodies was demonstrated in a sandwich immunosensor for procalcitonin. The results show that glycan-remodeled antibodies enable oriented immobilization and biosensing functionality with low nonspecific binding on antifouling polymer substrates.
Asunto(s)
Anticuerpos Inmovilizados , Técnicas Biosensibles , Polisacáridos , Técnicas Biosensibles/métodos , Polisacáridos/química , Polisacáridos/inmunología , Anticuerpos Inmovilizados/inmunología , Anticuerpos Inmovilizados/química , Polietilenglicoles/química , Incrustaciones Biológicas/prevención & control , Polilisina/química , Anticuerpos/inmunología , Anticuerpos/química , Humanos , Polímeros/químicaRESUMEN
RO process is commonly used to treat and reuse manganese-containing industrial wastewater. Nevertheless, even after undergoing multi-stage treatment, the secondary biochemical effluent still exhibits a high concentration of Mn2+ coupled with organics entering the RO system, leading to membrane fouling. In this work, we systematically analyze the RO membrane organic fouling processes and mechanisms, considering the coexistence of Mn2+ with humic acid (HA), sodium alginate (SA), bovine serum albumin (BSA) and their mixtures (HBS). The impact of Mn2+ on membrane fouling was HBS > SA > HA > BSA, controlling polysaccharide pollutant concentrations should be a priority for mitigating membrane fouling. In the presence of Mn2+ with HA, SA, or HBS, membrane fouling is primarily attributed to the complexation of organics and Mn2+ and the facilitation of interfacial interaction energy. RO membrane BSA fouling was not directly affected by Mn2+, the addition of Mn2+ induced a salting-out effect, leading to the deposition of BSA in a single molecular on the membrane. Simultaneously, adhesion energy hinders the deposition of BSA on the membrane, resulting in milder membrane fouling. This study provided the theoretical basis and suggestions for RO membrane organic fouling control in the presence of Mn2+.
Asunto(s)
Sustancias Húmicas , Manganeso , Membranas Artificiales , Manganeso/química , Sustancias Húmicas/análisis , Albúmina Sérica Bovina/química , Alginatos/química , Aguas Residuales/química , Incrustaciones Biológicas/prevención & controlRESUMEN
Polyethylene terephthalate (PET) and polylactic acid (PLA) are among the polymers used in the food industry. In this study, crude extracts of Dunaliella salina were used to treat the surface of 3D printed materials studied, aiming to provide them with an anti-adhesive property against Pseudomonas aeruginosa. The hydrophobicity of treated and untreated surfaces was characterized using the contact angle method. Furthermore, the adhesive behavior of P. aeruginosa toward the substrata surfaces was also studied theoretically and experimentally. The results showed that the untreated PLA was hydrophobic, while the untreated PET was hydrophilic. It was also found that the treated materials became hydrophilic and electron-donating. The total energy of adhesion revealed that P. aeruginosa adhesion was theoretically favorable on untreated materials, while it was unfavorable on treated ones. Moreover, the experimental data proved that the adhesion to untreated substrata was obtained, while there was complete inhibition of adhesion to treated surfaces.
Asunto(s)
Adhesión Bacteriana , Interacciones Hidrofóbicas e Hidrofílicas , Poliésteres , Tereftalatos Polietilenos , Impresión Tridimensional , Pseudomonas aeruginosa , Poliésteres/química , Tereftalatos Polietilenos/química , Adhesión Bacteriana/efectos de los fármacos , Pseudomonas aeruginosa/efectos de los fármacos , Pseudomonas aeruginosa/fisiología , Propiedades de Superficie , Chlorophyceae/efectos de los fármacos , Incrustaciones Biológicas/prevención & control , Extractos Vegetales/farmacología , Extractos Vegetales/químicaRESUMEN
The design of hydrophilic polyvinylidene fluoride (PVDF) membranes with anti-fouling properties has been explored for decades. Surface modification and blending are typical strategies to tailor the hydrophilicity of PVDF membranes. Herein, cyclodextrin was used to improve the antifouling performance of PVDF membranes. Cyclodextrin-modified PVDF membranes were prepared by coupling PVDF amination (blending with branched polyethyleneimine) and activated cyclodextrin grafting. The blending of PEI in the PVDF casting solution preliminarily aminated the PVDF, resulting in PEI-crosslinked/grafted PVDF membranes after phase inversion. Aldehydes groups on cyclodextrin, introduced by oxidation, endow cyclodextrin to be grafted on the aminated PVDF membrane by the formation of imines. Borch reduction performed on the activated cyclodextrin-grafted PVDF membrane converted the imine bonds to secondary amines, ensuring the membrane stability. The resulting membranes possess excellent antifouling performance, with a lower protein adsorption capacity (5.7 µg/cm2, indicated by Bovine Serum Albumin (BSA)), and a higher water flux recovery rate (FRR = 96%). The proposed method provides a facial strategy to prepare anti-fouling PVDF membranes.
Asunto(s)
Incrustaciones Biológicas , Ciclodextrinas , Interacciones Hidrofóbicas e Hidrofílicas , Membranas Artificiales , Polivinilos , Polivinilos/química , Incrustaciones Biológicas/prevención & control , Ciclodextrinas/química , Adsorción , Albúmina Sérica Bovina/química , Polímeros de FluorocarbonoRESUMEN
The common polyvinylidene fluoride (PVDF) membrane itself is susceptible to membrane fouling, especially biofouling, which is a serious threat. In this study, PVDF membrane was modified with ciprofloxacin (CIP) through co-blending to investigate the filtration properties, bacterial inhibition and fouling resistance. Modified membranes were prepared by adding 0.3 g (MC0.3), 0.6 g (MC0.6), 0.9 g (MC0.9) and 1.2 g (MC1.2) CIP per 100 g casting solution. Among these modified membranes, MC0.6 showed the best filtration performances, with the pure water flux stabilized at about 416.67 L/(m2·h) and bovine serum albumin (BSA) rejection of 92.0% at a trans-membrane pressure of 0.1 MPa. The pore size was reduced, the average roughness was reduced to 29.4 nm, the contact angle was lowered to 68.9°, and the hydrophilicity was greatly improved. The width of the inhibition circle produced by MC0.6 was 0.35-0.45 mm, and the modified membrane showed good inhibition of non-specific bacteria and algal removal during urban river water filtration. The rejection of BSA was increased by 16.32% compared to the base membrane and the adsorption rate for BSA was reduced by 68.45%. In addition, the removal of conventional pollutants in urban river water by the modified membranes for was also improved. Compared with that of the base membrane, the removal of TN, NH3-N, TP and COD by MC0.6 was increased by 10.58%, 12.45%, 15.44% and 13.53%. The results showed that CIP co-blending modified PVDF membrane could effectively improve membrane performances and has good value for water treatment.
Asunto(s)
Antibacterianos , Incrustaciones Biológicas , Ciprofloxacina , Filtración , Membranas Artificiales , Polivinilos , Purificación del Agua , Polivinilos/química , Ciprofloxacina/química , Ciprofloxacina/farmacología , Filtración/métodos , Purificación del Agua/métodos , Incrustaciones Biológicas/prevención & control , Antibacterianos/química , Antibacterianos/farmacología , Albúmina Sérica Bovina/química , Adsorción , Interacciones Hidrofóbicas e Hidrofílicas , Polímeros de FluorocarbonoRESUMEN
BACKGROUND: Developing biosensors with antifouling properties is essential for accurately detecting low-concentration biomarkers in complex biological matrix, which is imperative for effective disease diagnosis and treatment. Herein, an antifouling electrochemical aptasensor qualifying for probing targets in human serum was explored based on newly-devised peptides that could form inverted U-shaped structures with long-term stability. RESULTS: The inverted U-shaped peptides (U-Pep) with two terminals of thiol groups grafted onto the Au-modified electrode showcase superior antifouling properties in terms of high stability against enzymatic hydrolysis and long acting against biofouling in actual biofluids. The construction of the outlined antifouling electrochemical aptasensor just involved the fabrication of Au-deposited poly(3,4 ethylenedioxythiophene) (Au/PEDOT) modified electrode, followed by one-step co-incubation in the peptides and the aptamer probes with the Au/PEDOT electrode. Taking a typical biomarker of alpha-fetoprotein (AFP) for detection, this elegant antifouling aptasenor demonstrated a nice response for probing the target AFP with a low detection limit of 0.27 pg/mL and a wide linear scope of 1.0 pg/mL to 1.0 µg/mL, and furthermore qualified for assaying of AFP in human serum samples with satisfactory accuracy and feasibility. SIGNIFICANCE: This engineering strategy of U-Pep with long-lasting antifouling efficacy opens a new horizon for high-performance antifouling biosensors suitable for detection in complex bifluids, and it could spark more inspiration for a follow-up exploration of other featured antifouling biomaterials.
Asunto(s)
Aptámeros de Nucleótidos , Incrustaciones Biológicas , Técnicas Biosensibles , Técnicas Electroquímicas , Oro , Péptidos , Humanos , Técnicas Biosensibles/métodos , Péptidos/química , Oro/química , Aptámeros de Nucleótidos/química , Incrustaciones Biológicas/prevención & control , Electrodos , Polímeros/química , alfa-Fetoproteínas/análisis , Límite de Detección , Compuestos Bicíclicos Heterocíclicos con PuentesRESUMEN
Biofouling on marine surfaces causes immense material and financial harm for maritime vessels and related marine industries. Previous reports have shown the effectiveness of amphiphilic coating systems based on poly(dimethylsiloxane) (PDMS) against such marine foulers. Recent studies on biofouling mechanisms have also demonstrated acidic microenvironments in biofilms and stronger adhesion at low-pH conditions. This report presents the design and utilization of amphiphilic polymer coatings with buffer functionalities as an active disruptor against four different marine foulers. Specifically, this study explores both neutral and zwitterionic buffer systems for marine coatings, offering insights into coating design. Overall, these buffer systems were found to improve foulant removal, and unexpectedly were the most effective against the diatom Navicula incerta.
Asunto(s)
Biopelículas , Incrustaciones Biológicas , Diatomeas , Dimetilpolisiloxanos , Incrustaciones Biológicas/prevención & control , Diatomeas/fisiología , Dimetilpolisiloxanos/química , Animales , Tampones (Química) , Propiedades de Superficie , Concentración de Iones de HidrógenoRESUMEN
Microbial fouling involves the physicochemical interactions between microorganisms and solid surfaces. An electromagnetic field (EMF) may change the diffusion rates of microbial cells and the electrical double layer around the cells and contacting surfaces. In the current study, polycardanol exhibiting antibiofouling activity was modified with ferromagnetic iron oxide (IO) to investigate the EMF effects on bacterial adhesion. When there was a flow of electrolyte that contained bacterial cells, flow-induced EMF was generated according to Faraday's principle. It was observed that the IO-ionic solution (IS)-modified surfaces, with an induced current of 44, 53, 66 nA, showed decreases in the adhesion of bacteria cells more than the unmodified (polycardanol) and IO-nanoparticles-modified ones. In addition to the EMF effects, the nano-scale uniform roughness of the modified surfaces appeared to play an important role in the reduction of cell adhesion. The results demonstrated that the IOIS-modified surface (3.2 × 10-6 mM IO) had the highest antibiofouling activity.
Asunto(s)
Adhesión Bacteriana , Incrustaciones Biológicas , Campos Electromagnéticos , Fenoles , Propiedades de Superficie , Incrustaciones Biológicas/prevención & control , Adhesión Bacteriana/efectos de los fármacos , Fenoles/química , Fenoles/farmacología , Compuestos Férricos/química , Biopelículas/efectos de los fármacosRESUMEN
Photobioreactors (PBRs) are used to grow the light-requiring microalgae in diverse commercial processes. Often, they are operated as continuous culture over months period. However, with time, biofouling layer develops on the inner surfaces of their walls. The fouling layer formation deteriorates the PBR performance as foulants reduce light penetration in it. Light is essential for photosynthetic cultures, and a deterioration in lighting adversely impacts algae growth and biomass productivity. Fouling requires a frequent shutdown to clean the PBR and add to the environmental impact of the operation by generating many wastewaters contaminated with the cleaning chemicals. Antibiofouling coatings could be used to modify the surfaces of existing and future PBRs. Therefore, transparent and non-toxic fouling-release coatings, produced using hydrogel technology, could transform the existing PBRs into efficient and enduring microalgae culture systems, requiring only the application of the coating to the inner walls, without additional investments in new PBRs.
Asunto(s)
Incrustaciones Biológicas , Microalgas , Fotobiorreactores , Microalgas/crecimiento & desarrollo , Incrustaciones Biológicas/prevención & control , Biomasa , LuzRESUMEN
The sensitivity and accuracy of fluorescence probes for biological samples are affected by not only interfering molecule compounds but also the nonspecific adsorption of proteins and other macromolecules. Herein, fluorescence probe based on zwitterionic sulfobetaine methacrylate polymer (PSBMA) as an antibiofouling layer and amino boric acid carbon dots encapsulated in the metal-organic framework UiO-66-NH2 (UiO-66-NH2/BN-CDs) as a target recognition site was designed for the detection of baicalin (BAI). Owing to the introduction of BN-CDs into UiO-66-NH2 with high specific surface area, the prepared UiO-66-NH2/BN-CDs@PSBMA probe exhibited a high adsorption capacity of 78.9 mg g-1, while presented fluorescence enhancing and superior fluorescence selectivity to BAI at excitation and emission wavelengths of 400 and 425 nm, respectively. Connecting PSBMA with good hydrophilicity to UiO-66-NH2, resulted in an anti-protein capacity of over 96.3 %, effectively inhibiting protein interference with the fluorescence signal. By virtue of its good antibiofouling and recognizing capacities, the fluorescence probe exhibited a satisfactory detection range of 10-80 nmol L-1, with a fairly low detection limit of 0.0064 µmol L-1. Using the method to detect BAI in Goji berry, Sophora and Yinhuang oral solution, demonstrating its potential for the accurate and quantitative detection of BAI in complex biological samples.
Asunto(s)
Ácidos Borónicos , Carbono , Flavonoides , Colorantes Fluorescentes , Estructuras Metalorgánicas , Puntos Cuánticos , Colorantes Fluorescentes/química , Estructuras Metalorgánicas/química , Ácidos Borónicos/química , Carbono/química , Flavonoides/química , Flavonoides/análisis , Puntos Cuánticos/química , Incrustaciones Biológicas/prevención & control , Polímeros/química , Espectrometría de Fluorescencia/métodos , Límite de Detección , Metacrilatos/química , Adsorción , Betaína/química , Betaína/análogos & derivados , Ácidos FtálicosRESUMEN
The monitoring of biomarkers in wound exudate is of great importance for wound care and treatment, and electrochemical biosensors with high sensitivity are potentially useful for this purpose. However, conventional electrochemical biosensors always suffer from severe biofouling when performed in the complex wound exudate. Herein, an antifouling electrochemical biosensor for the detection of involucrin in wound exudate was developed based on a wound dressing, oxidized bacterial cellulose (OxBC) and quaternized chitosan (QCS) composite hydrogel. The OxBC/QCS hydrogel was prepared using an in-situ chemical oxidation and physical blending method, and the proportion of OxBC and QCS was optimized to achieve electrical neutrality and enhanced hydrophilicity, therefore endowing the hydrogel with exceptional antifouling and antimicrobial properties. The involucrin antibody SY5 was covalently bound to the OxBC/QCS hydrogel to construct the biosensor, and it demonstrated a low limit of detection down to 0.45 pg mL-1 and a linear detection range from 1.0 pg mL-1 to 1.0 µg mL-1, and it was capable of detecting targets in wound exudate. Crucially, the unique antifouling and antimicrobial capability of the OxBC/QCS hydrogel not only extends its effective lifespan but also guarantees the sensing performance of the biosensor. The successful application of this wound dressing, OxBC/QCS hydrogel for involucrin detection in wound exudate demonstrates its promising potential in wound healing monitoring.
Asunto(s)
Técnicas Biosensibles , Celulosa , Quitosano , Técnicas Electroquímicas , Oxidación-Reducción , Quitosano/química , Celulosa/química , Incrustaciones Biológicas/prevención & control , Humanos , Hidrogeles/química , Exudados y Transudados/química , Límite de DetecciónRESUMEN
Marine biofouling, caused by the deposition and accumulation of marine organisms on submerged surfaces, represents a huge concern for the maritime industries and also contributes to environmental pollution and health concerns. The most effective way to prevent this phenomenon is the use of biocide-based coatings which have proven to cause serious damage to marine ecosystems. Several research groups have focused on the search for new environmentally friendly antifoulants, including marine and terrestrial natural products and synthetic analogues. Some of these compounds have been incorporated into marine coatings and display interesting antifouling activities caused by the interference with the biofilm-forming species as well as by the inhibition of the settlement of macroorganisms. This review highlights the proof-of-concept studies of emerging natural or synthetic antifouling compounds in coatings, from lab-made to commercial ones, performed between 2019 and 2023 and their results in the field or in in vivo laboratorial tests.
Asunto(s)
Organismos Acuáticos , Incrustaciones Biológicas , Productos Biológicos , Incrustaciones Biológicas/prevención & control , Productos Biológicos/farmacología , Animales , Biopelículas/efectos de los fármacos , Desinfectantes/farmacología , HumanosRESUMEN
Marine biofouling remains a huge concern for maritime industries and for environmental health. Although the current biocide-based antifouling coatings can prevent marine biofouling, their use has been associated with toxicity for the marine environment, being urgent to find sustainable alternatives. Previously, our research group has identified a prenylated chalcone (1) with promising antifouling activity against the settlement of larvae of the macrofouling species Mytilus galloprovincialis (EC50 = 16.48⯵M and LC50 > 200⯵M) and lower ecotoxicity when compared to Econea®, a commercial antifouling agent in use. Herein, a series of chalcone 1 analogues were designed and synthesized in order to obtain optimized antifouling compounds with improved potency while maintaining low ecotoxicity. Compounds 8, 15, 24, and 27 showed promising antifouling activity against the settlement of M. galloprovincialis larvae, being dihydrochalcone 27 the most potent. The effect of compound 24 was associated with the inhibition of acetylcholinesterase activity. Among the synthesized compounds, compound 24 also showed potent complementary activity against Navicula sp. (EC50 = 4.86⯵M), similarly to the lead chalcone 1 (EC50 = 6.75⯵M). Regarding the structure-activity relationship, the overall results demonstrate that the substitution of the chalcone of the lead compound 1 by a dihydrochalcone scaffold resulted in an optimized potency against the settlement of mussel larvae. Marine polyurethane (PU)-based coatings containing the best performed compound concerning anti-settlement activity (dihydrochalcone 27) were prepared, and mussel larvae adherence was reduced compared to control PU coatings.
Asunto(s)
Incrustaciones Biológicas , Larva , Mytilus , Animales , Incrustaciones Biológicas/prevención & control , Larva/efectos de los fármacos , Mytilus/efectos de los fármacos , Chalconas/farmacología , Chalconas/química , Relación Estructura-Actividad , Chalcona/farmacología , Chalcona/análogos & derivados , Chalcona/química , Desinfectantes/toxicidad , Desinfectantes/farmacologíaRESUMEN
Our research focuses on developing environmentally friendly biodegradable ultrafiltration (UF) membranes for small-scale water purification in areas lacking infrastructure or during emergencies. To address biofouling challenges without resorting to harmful chemicals, we incorporate bio-based extracts, such as methyl gallate from A. occidentale leaves, a Malaysian ulam herb, known for its quorum sensing inhibition (QSI) properties. The methyl gallate enriched extract was purified by solvent partitioning and integrated into cellulose-based UF membranes (0 to 7.5% w w-1) through phase inversion technique. The resulting membranes exhibited enhanced anti-organic fouling and anti-biofouling properties, with flux recovery ratio (FRR) of 87.84 ± 2.00% against bovine serum albumin and FRRs of 76.67 ± 1.89% and 69.57 ± 1.77% against E. coli and S. aureus, respectively. The CA/MG-5 membrane showed a 224% improvement in pure water flux (PWF) compared to the neat CA membrane. Our innovative approach significantly improves PWF, presenting an environmentally friendly method for biofouling prevention in UF membrane applications.
Asunto(s)
Anacardium , Incrustaciones Biológicas , Escherichia coli , Membranas Artificiales , Extractos Vegetales , Ultrafiltración , Purificación del Agua , Incrustaciones Biológicas/prevención & control , Ultrafiltración/métodos , Extractos Vegetales/farmacología , Extractos Vegetales/química , Escherichia coli/efectos de los fármacos , Anacardium/química , Purificación del Agua/métodos , Staphylococcus aureus/efectos de los fármacos , Ácido Gálico/análogos & derivados , Ácido Gálico/farmacología , Ácido Gálico/química , Albúmina Sérica Bovina/químicaRESUMEN
The corrosion behaviors of four pure metals (Fe, Ni, Mo and Cr) in the presence of sulfate reducing bacteria (SRB) were investigated in enriched artificial seawater (EASW) after 14-day incubation. Metal Fe and metal Ni experienced weight losses of 1.96 mg cm-2 and 1.26 mg cm-2, respectively. In contrast, metal Mo and metal Cr exhibited minimal weight losses, with values of only 0.05 mg cm-2 and 0.03 mg cm-2, respectively. In comparison to Mo (2.2 × 106 cells cm-2) or Cr (1.4 × 106 cells cm-2) surface, the sessile cell counts on Fe (4.0 × 107 cells cm-2) or Ni (3.1 × 107 cells cm-2) surface was higher.
Asunto(s)
Adhesión Bacteriana , Sulfatos , Corrosión , Sulfatos/química , Metales/química , Agua de Mar/microbiología , Agua de Mar/química , Biopelículas/efectos de los fármacos , Biopelículas/crecimiento & desarrollo , Bacterias/efectos de los fármacos , Incrustaciones Biológicas/prevención & controlRESUMEN
This research introduces an Artificial Intelligence (AI) based model designed to concurrently optimize energy supply management, biocide dosing, and maintenance scheduling for heat exchangers. This optimization considers energetic, technical, economic, and environmental considerations. The impact of biofilm on heat exchangers is assessed, revealing a 41% reduction in thermal efficiency and a 113% increase in flow frictional resistance of the fluid compared to the initial state. Consequently, the pump's power consumption, required to maintain hydraulic conditions, rises by 9%. The newly developed AI model detects the point at which the heat exchanger's performance begins to decline due to accumulating dirt, marking day 44 of experimentation as the threshold to commence the antifouling biocide dosing. Leveraging this AI model to monitor heat exchanger efficiency represents an innovative approach to optimizing antifouling biocide dosing and reduce the environmental impact stemming from industrial plants.
Asunto(s)
Inteligencia Artificial , Biopelículas , Incrustaciones Biológicas , Desinfectantes , Agua de Mar , Agua de Mar/química , Biopelículas/efectos de los fármacos , Incrustaciones Biológicas/prevención & control , Modelos TeóricosRESUMEN
A sensing interface co-constructed from the two-dimensional conductive material (Ag@MXene) and an antifouling cyclic multifunctional peptide (CP) is described. While the large surface area of Ag@MXene loads more CP probes, CP binds to Ag@MXene to form a fouling barrier and ensure the structural rigidity of the targeting sequence. This strategy synergistically enhances the biosensor's sensitivity and resistance to contamination. The SPR results showed that the binding affinity of the CP to the target was 6.23 times higher than that of the antifouling straight-chain multifunctional peptide (SP) to the target. In the 10 mg/mL BSA electrochemical fouling test, the fouling resistance of Ag@MXene + CP (composite sensing interface of CP combined with Ag@MXene) was 30 times higher than that of the bare electrode. The designed electrochemical sensor exhibited good selectivity and wide dynamic response range at PD-L1 concentrations from 0.1 to 50 ng/mL. The lowest detection limit was 24.54 pg/mL (S/N = 3). Antifouling 2D materials with a substantial specific surface area, coupled with non-straight chain antifouling multifunctional peptides, offer a wide scope for investigating the sensitivity and antifouling properties of electrochemical sensors.