RESUMEN
Furniture is identified as a vital volatile organic compound (VOC) emission source in the indoor environment. Leather has become the most common raw and auxiliary fabric material for upholstered furniture, particularly with extensive consumption in sofas, due to its abundant resources and efficient functions. Despite being widely traded across the world, little research has been conducted on the VOCs released by leather materials and their health risk assessment in the indoor environment. Accordingly, this study investigated the VOC emissions of leather with different grades and the health risk of the inhalation exposure. Based on the ultra-fast gas phase electronic nose (EN) and GC-FID/Qtof, the substantial emissions of aliphatic aldehyde ketones (Aks), particularly hexanal, appear to be the cause of off-flavor in medium and low grade (MG and LG) sofa leathers. The health risk assessment indicated that leather materials barely pose non-carcinogenic and carcinogenic effects to residents. Given the abundance of VOC sources and the accumulation of health risks in the indoor environment, more stringent specifications concerning qualitative and quantitative content should be extended to provide VOC treatment basic for the manufacturing industry and obtain better indoor air quality.
Asunto(s)
Contaminación del Aire Interior , Compuestos Orgánicos Volátiles , Compuestos Orgánicos Volátiles/análisis , Contaminación del Aire Interior/análisis , Contaminación del Aire Interior/estadística & datos numéricos , Medición de Riesgo , Monitoreo del Ambiente , Contaminantes Atmosféricos/análisis , Humanos , Diseño Interior y Mobiliario , Exposición por Inhalación/análisis , Exposición por Inhalación/estadística & datos numéricos , Textiles/análisisRESUMEN
Traditional pressure-sensitive microcapsules used in textiles face challenges of insufficient environmental friendliness in the production process and uncontrollable fragrance release. To address this issue, this study utilized quaternary ammonium chitosan and silica as wall materials to develop a magnetic aromatic microcapsule. The microstructure of the microcapsules was controlled by magnetic field induction, and its evolution pattern was investigated. After magnetic field induction, the microcapsules exhibited a trend of evolving from spherical to asymmetrical shapes, accompanied by significant changes in mechanical properties. Asymmetrical microcapsules showed higher adhesion and lower stiffness. When applied to cotton textiles, the cotton textiles treated with asymmetrical microcapsules released 63.40 % of lavender essential oil after 200 friction cycles, representing an 11.3 % improvement in release efficiency compared to regular microcapsules, indicating better mechanical stimulus responsiveness. Additionally, in antibacterial tests, aromatic cotton exhibited a 96.52 % inhibition ratio against Escherichia coli. In summary, this study explores methods to adjust the mechanical properties of microcapsules and the relationship between mechanical properties and microstructure, providing a new approach for functional textiles.
Asunto(s)
Antibacterianos , Cápsulas , Quitosano , Escherichia coli , Compuestos de Amonio Cuaternario , Quitosano/química , Compuestos de Amonio Cuaternario/química , Escherichia coli/efectos de los fármacos , Antibacterianos/química , Antibacterianos/farmacología , Campos Magnéticos , Aceites Volátiles/química , Aceites Volátiles/farmacología , Odorantes/análisis , Textiles , Dióxido de Silicio/química , Fibra de AlgodónRESUMEN
Confirmatory identification of dyes in the physical pieces of evidence, such as hair and fabric, is critically important in forensics. This information can be used to demonstrate the link between a person of interest and a crime scene. High performance liquid chromatography is broadly used for dye analysis. However, this technique is destructive and laborious. This problem can be overcome by near-Infrared excitation Raman spectroscopy (NIeRS), non-invasive and non-destructive technique that can be used to determine chemical structure of highly fluorescent dyes. Analyzed fabric materials often possess body fluid stains, which may obscure the accuracy of NIeRS-based identification of dyes. In this study, we investigate the extent to which fabric contamination with body fluids can alter the accuracy of NIeRS. Our results showed that NIeRS coupled with partial-least squared discriminant analysis (PLS-DA) enabled on average 97.6% accurate identification of dyes on fabric contaminated with dry blood, urine and semen. We also found that NIeRS could be used to identify blood, urine and semen on such fabric with 99.4% accuracy. Furthermore, NIeRS could be used to differentiate between wet and dry blood, as well as reveal the presence of blood on washed fabric. These results indicate that NIeRS coupled with PLS-DA could be used as a robust and reliable analytical approach in forensic analysis of fabric.
Asunto(s)
Espectrometría Raman , Textiles , Espectrometría Raman/métodos , Textiles/análisis , Humanos , Espectroscopía Infrarroja Corta/métodos , Líquidos Corporales/química , Semen/química , Colorantes/química , Colorantes/análisis , Ciencias Forenses/métodosRESUMEN
Herein we report a wearable sweat sensor of a Janus fabric based on surface enhanced Raman scattering (SERS) technology, mainly detecting the two important metabolites glucose and lactate. Janus fabric is composed of electrospinning PU on a piece of medical gauze (cotton), working as the unidirectional moisture transport component (R = 1305%) to collect and transfer sweat efficiently. SERS tags with different structures act as the probe to recognize and detect the glucose and lactate in high sensitivity. Core-shell structured gold nanorods with DTNB inside (AuNRs@DTNB@Au) are used to detect lactate, while gold nanorods with MPBA (AuNRs@MPBA) are used to detect glucose. Through the characteristic SERS information, two calibration functions were established for the concentration determination of glucose and lactate. The concentrations of glucose and lactate in sweat of a 23 years volunteer during three-stage interval running are tested to be 95.5, 53.2, 30.5 µM and 4.9, 13.9, 10.8 mM, indicating the glucose (energy) consumption during exercise and the rapid accumulation of lactate at the early stage accompanied by the subsequent relief. As expected, this sensing system is able to provide a novel strategy for effective acquisition and rapid detection of essential biomarkers in sweat.
Asunto(s)
Técnicas Biosensibles , Glucosa , Oro , Ácido Láctico , Nanotubos , Espectrometría Raman , Sudor , Textiles , Dispositivos Electrónicos Vestibles , Sudor/química , Técnicas Biosensibles/instrumentación , Humanos , Ácido Láctico/análisis , Glucosa/análisis , Oro/química , Nanotubos/química , Adulto Joven , Diseño de Equipo , Monitoreo Fisiológico/instrumentación , Monitoreo Fisiológico/métodosRESUMEN
Artificial neuromorphic devices can emulate dendric integration, axonal parallel transmission, along with superior energy efficiency in facilitating efficient information processing, offering enormous potential for wearable electronics. However, integrating such circuits into textiles to achieve biomimetic information perception, processing, and control motion feedback remains a formidable challenge. Here, we engineer a quasi-solid-state iontronic synapse fiber (ISF) comprising photoresponsive TiO2, ion storage Co-MoS2, and an ion transport layer. The resulting ISF achieves inherent short-term synaptic plasticity, femtojoule-range energy consumption, and the ability to transduce chemical/optical signals. Multiple ISFs are interwoven into a synthetic neural fabric, allowing the simultaneous propagation of distinct optical signals for transmitting parallel information. Importantly, IFSs with multiple input electrodes exhibit spatiotemporal information integration. As a proof of concept, a textile-based multiplexing neuromorphic sensorimotor system is constructed to connect synaptic fibers with artificial fiber muscles, enabling preneuronal sensing information integration, parallel transmission, and postneuronal information output to control the coordinated motor of fiber muscles. The proposed fiber system holds enormous promise in wearable electronics, soft robotics, and biomedical engineering.
Asunto(s)
Sinapsis , Textiles , Sinapsis/fisiología , Dispositivos Electrónicos Vestibles , Biomimética/métodos , Biomimética/instrumentación , Humanos , Plasticidad Neuronal/fisiologíaRESUMEN
INTRODUCTION: In light of the COVID-19 (Coronovirus Disease 2019) pandemic, the use of personal protective equipment has become essential to reduce viral transmission and maintain public health. Viruses, particularly human coronavirus and influenza, pose significant challenges because of their various transmission routes. UMF Corporation's innovation, Micrillon, aims to address these challenges by creating durable, antiviral technology for textiles without harmful chemicals, reducing viral transmission risks. MATERIALS AND METHODS: The study followed ISO Standard 18184:2019, testing Micrillon textiles against Human Coronavirus OC43 and H1N1 Influenza A virus using MDCK and HCT-8 cell lines. Cell propagation, viral application, TCID50 (Median Tissue Culture Infectious Dose) testing, and maintenance protocols were rigorously implemented to assess antiviral efficacy. RESULTS: Micrillon gloves, fabrics, and fibers exhibited high antiviral efficacy against both viruses across various contact times. Gloves demonstrated exceptional antiviral activity against H1N1 (99.88%) and OC43 (99.67%) at 120 minutes. Rolled fabrics showed strong efficacy against H1N1 (99.42% at 30 minutes) and OC43 (>97%) at all time points. Bundled fibers displayed substantial efficacy against H1N1 (99.17% at 120 minutes) and OC43 (>98%) at all time points. CONCLUSIONS: The study demonstrates that Micrillon technology effectively inhibits viral activity, particularly in gloves, fabrics, and fibers. The innovation not only shows high antiviral efficacy against both Human Coronavirus and Influenza but also promises a reusable, sustainable solution, mitigating environmental impact and reducing the use of harmful chemicals in personal protective equipment. The technology holds promise for widespread use in health care and hospitality, offering a layer of protection while being environmentally conscious. Further development of such technologies can significantly reduce infection risks while minimizing environmental harm.
Asunto(s)
Antivirales , COVID-19 , Subtipo H1N1 del Virus de la Influenza A , Textiles , Humanos , COVID-19/prevención & control , COVID-19/transmisión , Antivirales/uso terapéutico , Antivirales/farmacología , Subtipo H1N1 del Virus de la Influenza A/efectos de los fármacos , SARS-CoV-2/efectos de los fármacos , Animales , Perros , Equipo de Protección Personal/normas , Línea CelularRESUMEN
Sophisticated structure design and multi-step manufacturing processes for balancing spectra-selective optical property and the necessary applicable performance for human thermal-wet regulation, is the major limitation in wide application of radiative cooling materials. Herein, we proposed a biomass confinement strategy to a gradient porous Janus cellulose film for enhanced optical performance without compromising thermal-wet comfortable. The bacterial cellulose confined grow in the micro-nano pores between PP nonwoven fabric and SiO2 achieving the cross-scale gradient porous Janus structure. This structure enables the inorganic scatterers even distribution forming multi-reflecting optical mechanism, thereby, gradient porous Janus film demonstrates a reflectivity of 93.1 % and emissivity of 88.1 %, attains a sub-ambient cooling temperature difference of 2.8 °C(daytime) and 8.5 °C(night). Film enables bare skin to avoid overheating by 7.7 °C compared to cotton fabric. It reaches a 17.2 °C building cooling temperature under 1 sun radiance. Moreover, biomass confined micro-nano gradient porous structure integrating with Janus wet gradient guarantees the driven force for directional water transportation, which satisfies the thermal-wet comfortable demands for human cooling application without any further complicated process. Overall, bacterial cellulose based biomass confining strategy provides a prospective method to obtain outdoor-service performance in cooling materials.
Asunto(s)
Biomasa , Celulosa , Celulosa/química , Porosidad , Humanos , Dióxido de Silicio/química , Frío , TextilesRESUMEN
The key to high-quality development in the textile and apparel industry lies in enhancing technological innovation and optimizing the efficiency of technological innovation. Based on data from 60 A-share listed companies in the textile and apparel sector in China from 2013 to 2022, this study employs a three-stage DEA model and the Malmquist index model to measure changes in technological innovation efficiency from static and dynamic perspectives. Additionally, it uses a Tobit model to analyze the impact and mechanisms of management and financial factors on technological innovation efficiency. The results indicate that: (1) Compared to the manufacturing industry and its sub-sectors, the overall technological innovation efficiency of listed textile and apparel companies was relatively low and showed a declining trend between 2013 and 2022; (2) Over the decade, the average total factor productivity of these listed companies increased by 1.7%, exhibiting a "W" shaped fluctuation, with technological progress, pure technical efficiency, and scale efficiency all showing weak improvement; (3) Management and financial factors significantly influence technological innovation efficiency. Specifically, employee quality, profitability, and operational capability are positively correlated with technological innovation efficiency and have long-term effectiveness, while firm age, management costs, equity concentration, development ability, and debt repayment capacity are negatively correlated with technological innovation efficiency; (4) Different types of enterprises show differences in the significance of management factors, while whether the same person holds both managerial positions significantly affects financial factors.
Asunto(s)
Invenciones , Industria Textil , China , Humanos , TextilesRESUMEN
This paper proposes a novel multi-band textile monopole antenna for patient tracking applications. The designed antenna has compact footprints (0.13λ02) and works in the narrow band-internet of things (NB-IoT) 1.8 GHz, radio frequency identification (RFID), and industrial, scientific, and medical (ISM) 2.45 GHz and 5.8 GHz bands. The impedance bandwidths and gain of the antenna at 1.8 GHz, 2.45 GHz, and 5.8 GHz are 310 MHz, 960 MHz, and 1140 MHz; 3.7 dBi, 5.3 dBi, and 9.6 dBi, respectively. Also, the antenna's behavior is checked on different body parts of the human body in various bending scenarios. As per the evaluated link budget, the designed antenna can easily communicate up to 100 m of distance. The specific absorption rate values of the designed antenna are also within acceptable limits as per the (FCC/ICNIRP) standards at the reported frequency bands. Unlike traditional rigid antennas, the proposed textile antenna is non-intrusive, enhancing user safety and comfort. The denim material makes it comfortable for extended wear, reducing the risk of skin irritation. It can also withstand regular wear and tear, including stretching and bending. The presented denim-based antenna can be seamlessly integrated into clothing and accessories, making it less obtrusive and more aesthetically pleasing.
Asunto(s)
Internet de las Cosas , Dispositivo de Identificación por Radiofrecuencia , Textiles , Dispositivos Electrónicos Vestibles , Humanos , Dispositivo de Identificación por Radiofrecuencia/métodos , Tecnología Inalámbrica/instrumentación , Diseño de EquipoRESUMEN
Cotton is used for the production of textiles, hygiene and cosmetic materials. During cultivation and technological processes, various types of substances (surfactants, softeners, lubricants, etc.) penetrate cotton, which can have a harmful effect on both the human body and the environment. The aim of this study was to analyze selected cotton products in order to identify the substances contained and to describe the potential possibilities of inducing textile contact dermatitis (CD). The impact of the identified compounds on the aquatic environment was also taken into account. Nine samples of cotton clothing and seven samples of cotton pads from various manufacturers were tested. Samples after extraction using the FUSLE (Focused Ultrasonic Liquid Extraction) technique were analyzed with GC/MS. Qualitative analysis was based on comparing mass spectra with library spectra using the following mass spectra deconvolution programs: MassHunter (Agilent), AMDIS (NIST), and PARADISE (University of Copenhagen). The parameter confirming the identification of the substance was the retention index. Through the non-target screening process, a total of 36 substances were identified, with an average AMDIS match factor of approximately 900 ("excellent match"). Analyzing the properties of the identified compounds, it can be concluded that most of them have potential properties that can cause CD, also due to the relatively high content in samples. This applies primarily to long-chain alkanes (C25-C31), saturated fatty acids, fatty alcohols (e.g., oleyl alcohol), and fatty acid amides (e.g., oleamide). However, there are not many reports describing cases of cotton CD. Information on the identified groups of compounds may be helpful in the case of unexplained sources of sensitization when the skin comes into contact with cotton materials. Some of the identified compounds are also classified as dangerous for aquatic organisms, especially if they can be released during laundering.
Asunto(s)
Fibra de Algodón , Cromatografía de Gases y Espectrometría de Masas , Cromatografía de Gases y Espectrometría de Masas/métodos , Fibra de Algodón/análisis , Humanos , Textiles/análisis , Dermatitis por Contacto/etiologíaRESUMEN
The growing activity in the textile industry has been demanding the search for new and innovative technologies to meet consumers' needs regarding more sustainable and ecological processes, with functionality receiving more attention. Bee products are known for their wide spectra of properties, including antioxidant and antibacterial activities. Propolis and honey are the most popular and used since ancient times for the most diverse applications due to their health benefits. With the increasing need for safer and more sustainable practices, the use of natural products for the functional finishing process can be a suitable alternative due to their safety and eco-friendly nature. For that, a biosolution, composed of a mixture of propolis and honey in water, was used to perform the functional finishing of cotton knits, both in the presence and in the absence of potassium alum as a chemical mordant. The fastness strength was also evaluated after three washing cycles. The antioxidant potential of the biosolution, assessed with the in vitro ABTS scavenging assay, provided textiles with the capacity to reduce more than 90% of the ABTS radical, regardless of the mordant presence and even after three washing cycles. Furthermore, biofunctional textiles decreased the growth of Bacillus subtilis, Propionibacterium acnes, Escherichia coli, and, particularly, Staphylococcus aureus cultures after 24 h of incubation with an increase in antibacterial activity when potassium alum was used. These findings show that bee products are promising and effective alternatives to be used in the textile industry to confer antioxidant and antibacterial properties to cotton textiles, thereby enhancing human health.
Asunto(s)
Antibacterianos , Antioxidantes , Miel , Própolis , Própolis/química , Própolis/farmacología , Miel/análisis , Antioxidantes/farmacología , Antioxidantes/química , Antibacterianos/farmacología , Antibacterianos/química , Textiles , Fibra de Algodón/análisis , Staphylococcus aureus/efectos de los fármacos , Staphylococcus aureus/crecimiento & desarrollo , Pruebas de Sensibilidad Microbiana , Escherichia coli/efectos de los fármacos , Escherichia coli/crecimiento & desarrollo , Compuestos de Alumbre/química , Bacillus subtilis/efectos de los fármacos , Bacillus subtilis/crecimiento & desarrolloRESUMEN
Poly(l-lactic acid) (PLLA) is a widely used U.S. Food and Drug Administration-approved implantable biomaterial that also possesses strong piezoelectricity. However, the intrinsically low stability of its high-energy piezoelectric ß phase and random domain orientations associated with current synthesis approaches remain a critical roadblock to practical applications. Here, we report an interfacial anchoring strategy for fabricating core/shell PLLA/glycine (Gly) nanofibers (NFs) by electrospinning, which show a high ratio of piezoelectric ß phase and excellent orientation alignment. The self-assembled core/shell structure offers strong intermolecular interactions between the -OH groups on Gly and C=O groups on PLLA, which promotes the crystallization of oriented PLLA polymer chains and stabilizes the ß phase structure. As-received core/shell NFs exhibit substantially enhanced piezoelectric performance and excellent stability. An all NF-based nonwoven fabric is fabricated and assembled as a flexible nanogenerator. The device offers excellent conformality to heavily wrinkled surfaces and thus can precisely detect complex physiological motions often found from biological organs.
Asunto(s)
Materiales Biocompatibles , Nanofibras , Poliésteres , Nanofibras/química , Materiales Biocompatibles/química , Poliésteres/química , Prótesis e Implantes , Textiles , Glicina/químicaRESUMEN
Developing special textiles (for patients in hospitals for example) properties, special antimicrobial and anticancer, was the main objective of the current work. The developed textiles were produced after dyeing by the novel formula of natural (non-environmental toxic) pigments (melanin amended by microbial-AgNPs). Streptomyces torulosus isolate OSh10 with accession number KX753680.1 was selected as a superior producer for brown natural pigment. By optimization processes, some different pigment colors were observed after growing the tested strain on the 3 media. Dextrose and malt extract enhanced the bacteria to produce a reddish-black color. However, glycerol as the main carbon source and NaNO3 and asparagine as a nitrogen source were noted as the best for the production of brown pigment. In another case, starch as a polysaccharide was the best carbon for the production of deep green pigment. Peptone and NaNO3 are the best nitrogen sources for the production of deep green pigment. Microbial-AgNPs were produced by Fusarium oxysporum with a size of 7-21 nm, and the shape was spherical. These nanoparticles were used to produce pigments-nanocomposite to improve their promising properties. The antimicrobial of nanoparticles and textiles dyeing by nanocomposites was recorded against multidrug-resistant pathogens. The new nanocomposite improved pigments' dyeing action and textile properties. The produced textiles had anticancer activity against skin cancer cells with non-cytotoxicity detectable action against normal skin cells. The obtained results indicate to application of these textiles in hospital patients' clothes.
Asunto(s)
Antineoplásicos , Colorantes , Plata , Textiles , Textiles/microbiología , Colorantes/química , Humanos , Antineoplásicos/farmacología , Antineoplásicos/química , Plata/farmacología , Plata/química , Fusarium/efectos de los fármacos , Streptomyces/metabolismo , Antiinfecciosos/farmacología , Antiinfecciosos/química , Nanopartículas del Metal/química , Pigmentos Biológicos/farmacología , Pigmentos Biológicos/biosíntesis , Pruebas de Sensibilidad Microbiana , Línea Celular TumoralRESUMEN
This study presents the development and evaluation of an innovative intelligent garment system, incorporating 3D knitted silver biopotential electrodes, designed for long-term sports monitoring. By integrating advanced textile engineering with wearable monitoring technologies, we introduce a novel approach to real-time physiological signal acquisition, focusing on enhancing athletic performance analysis and fatigue detection. Utilizing low-resistance silver fibers, our electrodes demonstrate significantly reduced skin-to-electrode impedance, facilitating improved signal quality and reliability, especially during physical activities. The garment system, embedded with these electrodes, offers a non-invasive, comfortable solution for continuous ECG and EMG monitoring, addressing the limitations of traditional Ag/AgCl electrodes, such as skin irritation and signal degradation over time. Through various experimentation, including impedance measurements and biosignal acquisition during cycling activities, we validate the system's effectiveness in capturing high-quality physiological data. Our findings illustrate the electrodes' superior performance in both dry and wet conditions. This study not only advances the field of intelligent garments and biopotential monitoring, but also provides valuable insights for the application of intelligent sports wearables in the future.
Asunto(s)
Electrodos , Dispositivos Electrónicos Vestibles , Humanos , Monitoreo Fisiológico/instrumentación , Monitoreo Fisiológico/métodos , Electromiografía/métodos , Electromiografía/instrumentación , Electrocardiografía/instrumentación , Electrocardiografía/métodos , Vestuario , Textiles , Deportes/fisiología , Diseño de Equipo , Impedancia EléctricaRESUMEN
With the development of technology, people's demand for pressure sensors with high sensitivity and a wide working range is increasing. An effective way to achieve this goal is simulating human skin. Herein, we propose a facile, low-cost, and reproducible method for preparing a skin-like multi-layer flexible pressure sensor (MFPS) device with high sensitivity (5.51 kPa-1 from 0 to 30 kPa) and wide working pressure range (0-200 kPa) by assembling carbonized fabrics and micro-wrinkle-structured Ag@rGO electrodes layer by layer. In addition, the highly imitated skin structure also provides the device with an extremely short response time (60/90 ms) and stable durability (over 3000 cycles). Importantly, we integrated multiple sensor devices into gloves to monitor finger movements and behaviors. In summary, the skin-like MFPS device has significant potential for real-time monitoring of human activities in the field of flexible wearable electronics and human-machine interaction.
Asunto(s)
Fibra de Algodón , Presión , Dispositivos Electrónicos Vestibles , Humanos , Fibra de Algodón/análisis , Monitoreo Fisiológico/instrumentación , Monitoreo Fisiológico/métodos , Técnicas Biosensibles/instrumentación , Técnicas Biosensibles/métodos , Electrodos , Piel , Textiles , Actividades HumanasRESUMEN
In response to the ongoing threat posed by respiratory diseases, ensuring effective transmission protection is crucial for public health. To address the drawbacks of single-use face masks/respirators, which can be a potential source of contact-based transmission, we have designed an antimicrobial face mask and mask covering utilizing a stack of salt-coated spunbond (SB) fabric. This fabric acts as an outer layer for the face mask and as a covering over a conventional mask, respectively. We evaluated the universal antimicrobial performance of the salt-coated three-stacked SB fabric against enveloped/nonenveloped viruses and spore-forming/nonspore-forming bacteria. The distinctive pathogen inactivation efficiency was confirmed, including resistant pathogens such as human rhinovirus and Clostridium difficile. In addition, we tested other filter attributes, such as filtration efficiency and breathability, to determine the optimal layer for salt coating and its effects on performance. Our findings revealed that the outer layer of a conventional face mask plays a crucial role in contact transmission through contaminated face masks and respirators. Through contact transmission experiments using droplets involving three types of contaminants (fluorescent dyes, bacteria, and viruses), the salt-coated stacked SB fabric demonstrated a superior effect in preventing contact transmission compared to SB or meltblown polypropylene fabricsâan issue challenging to existing masks. Our results demonstrate that the use of salt-coated stacked SB fabrics as (i) the outer layer of a mask and (ii) a mask cover over a mask enhances overall filter performance against infectious droplets, achieving high pathogen inactivation and low contact-based transmission while maintaining breathability.
Asunto(s)
Máscaras , Ensayo de Materiales , Polipropilenos , Textiles , Polipropilenos/química , Máscaras/virología , Humanos , Tamaño de la Partícula , Antiinfecciosos/farmacología , Antiinfecciosos/química , Clostridioides difficile/efectos de los fármacosRESUMEN
Currently, the market for wearable devices is expanding, with a growing trend towards the use of these devices for continuous-monitoring applications. Among these, real-time posture monitoring and assessment stands out as a crucial application given the rising prevalence of conditions like forward head posture (FHP). This paper proposes a wearable device that combines the acquisition of electromyographic signals from the cervical region with inertial data from inertial measurement units (IMUs) to assess the occurrence of FHP. To improve electronics integration and wearability, e-textiles are explored for the development of surface electrodes and conductive tracks that connect the different electronic modules. Tensile strength and abrasion tests of 22 samples consisting of textile electrodes and conductive tracks produced with three fiber types (two from Shieldex and one from Imbut) were conducted. Imbut's Elitex fiber outperformed Shieldex's fibers in both tests. The developed surface electromyography (sEMG) acquisition hardware and textile electrodes were also tested and benchmarked against an electromyography (EMG) gold standard in dynamic and isometric conditions, with results showing slightly better root mean square error (RMSE) values (for 4 × 2 textile electrodes (10.02%) in comparison to commercial Ag/AgCl electrodes (11.11%). The posture monitoring module was also validated in terms of joint angle estimation and presented an overall error of 4.77° for a controlled angular velocity of 40°/s as benchmarked against a UR10 robotic arm.
Asunto(s)
Electromiografía , Postura , Textiles , Dispositivos Electrónicos Vestibles , Electromiografía/métodos , Humanos , Postura/fisiología , Monitoreo Fisiológico/instrumentación , Monitoreo Fisiológico/métodos , ElectrodosRESUMEN
Personalized medical diagnostics and monitoring have become increasingly important due to inefficient and delayed medical services of traditional centralized healthcare systems. To enhance the comfort and portability, flexible health monitoring systems have been developed in recent years. In particular, smart fiber/textile-based sensing devices show superiority for continuously monitoring personal health and vital physiological parameters owing to their light weight, good flexibility and inherent miniaturization. This review focuses on the recent advances in smart fiber/textile-based sensing devices for wearable electronic applications. First, fabrication strategies of smart sensing fibers/textiles are introduced in detail. In addition, sensing performances, working principles and applications of smart sensing fibers/textiles such as pressure sensing fibers/textiles, stretchable strain sensing fibers/textiles, temperature sensing fibers/textiles, and biofluid, gas and humidity sensing fibers/textiles in health monitoring are also reviewed systematically. Finally, we propose current challenges and future prospects in the area of fiber/textile-based sensors for wearable healthcare monitoring and diagnosis systems. In general, this review aims to give an overall perspective of the promising field by reviewing various fiber/textile-based sensing devices and highlighting the importance for researchers to keep up with the sequential exploration of soft sensing fibers/textiles for applications in wearable smart systems.
Asunto(s)
Textiles , Dispositivos Electrónicos Vestibles , Humanos , Monitoreo Fisiológico/instrumentación , Monitoreo Fisiológico/métodos , Medicina de Precisión/instrumentación , Medicina de Precisión/métodos , Diseño de Equipo , Técnicas Biosensibles/instrumentación , Técnicas Biosensibles/métodosRESUMEN
The textile industry is a pillar of the manufacturing sector worldwide, but it still represents a significantly polluting production sector since it is energy-, water- and natural resource-intensive. Herein, waste wool that did not meet the technical requirements to be used for yarns and fabrics was recovered first to prepare materials for wastewater remediation, specifically for phosphate removal. The wool underwent an alkaline treatment, eventually saturated with FeCl3 and then left at room temperature or thermally treated to induce crosslinking/stabilisation, obtaining adsorbent panels. The main characterisation findings concerned the impact of alkaline treatment on morphology and structure; additionally, the samples with iron displayed a behaviour attributable to a crosslinking effect operated by Fe3+. Batch experiments showed that only samples with iron were efficient in phosphate adsorption, with a high removal percentage obtained in a wide pH range. Adsorption isotherms and kinetics were investigated, suggesting a complex system of interactions. Moreover, during the alkaline treatment necessary to prepare such wool-derived adsorbent panels, a significant amount of wool hydrolysates left in the solution was produced. These substances, in view of zero-waste procedures, were isolated and re-employed as dyeing auxiliaries. Preliminary results demonstrated that the wool hydrolysates enabled the dyeing of cotton with natural dyes, which is generally a tricky process.
Asunto(s)
Colorantes , Fosfatos , Textiles , Lana , Lana/química , Adsorción , Fosfatos/química , Colorantes/química , Animales , Contaminantes Químicos del Agua/química , Industria Textil , Aguas Residuales/químicaRESUMEN
Effective sweat management fabric for sportswear facilitates sweat removal from the skin and elevates the comfort for human. However, when the body is in a strong hot and humid environment or after strenuous exercise, the sweat management fabric will be totally wetted and saturated quickly. As a result, excess sweat cannot be absorbed effectively by the garment, which creates obvious stickiness and heaviness. In this paper, a directional water transport and collection multilayered knitted fabric (DWTCF) is prepared by plasma pretreatment technology and screen coating. The treelike water transport network inspired from nature is designed in order to drive the liquid flow along the channels. By surface modification, branched hydrophilic flow paths are fabricated, and other regions are hydrophobic. As a demonstration, DWTCF has been injected with water to observe the liquid transport behavior. During the experiment, 76.7% liquid is collected by DWTCF, but there is just 0.06% collected by an ordinary knitted fabric. The weight increase of the ordinary fabric is 555.4% larger than that of DWTCF. Specifically, DWTCF utilizes the wetting and pressure-gradient-induced interfacial tension as well as the gravitational effect to facilitate the fluid motion along the hydrophilic channel, in addition to the capillarity present in the fabric structure. This study provides a new idea to develop directional water transport and collection fabric to solve the moisture absorption saturation problem of the fabric, especially for conditions requiring intense sweating.