Silicate coating to prevent leaching from radiolabeled surrogate far-field fallout in aqueous environments.

Recent characterization of radioactive particles indicate that a large percentage of the radioactivity observed during the Fukushima Daiichi nuclear meltdown was insoluble 137Cs bound within silica microparticles. Therefore, much of the decontamination research performed prior to the Fukushima incident that used either soluble radionuclides deposited onto wet surfaces or large (∼100 µm) particles characteristic of nuclear weapons fallout do not accurately represent the characteristics of potential contamination. Thus, the common practice of extrapolating radioactive decontamination methods generically to all radioactive release events is, at best, suspect. In response, a method to produce chemically-inert, radiolabeled silica particles was developed. Binding 152Eu within a sodium silicate coating required proper temperature control and ethanol was beneficial as a volatile dispersant to limit residues. In the end, a step-wise method, which first deposited 152Eu or 241Am as a nitrate salt, decomposed the salt to a sesquioxide, and finally coated the surface with sodium silicate led to dispersed particles of the desired 2 or 0.5 µm diameters. Dynamic light scattering and scanning election microscopy confirmed the particle size was unchanged. Leaching studies into several common decontaminants were performed to ensure particle inertness. Our approach allows for substitution of other radionuclides making it a robust, simple, and novel method to produce inert particle surrogates for a release event that allows direct comparison of decontamination techniques and contaminant fate studies, greatly aiding the development of response and recovery plans.