Formulation and optimization of lipid- and Poloxamer-tagged niosomes for dermal delivery of terbinafine: preparation, evaluation, and in vitro antifungal activity.

Fungal skin diseases are recognized as a global burden disease that affect human quality adjusted life. Terbinafine belongs to allylamine and broad-spectrum antifungal drugs but considered practically insoluble. Different lipids/surfactant with two different molar ratios were investigated with Span 40-based niosomes; characterized for size, morphology, loading capacity (EE%), in vitro release, kinetics, and antifungal activities. Vesicle sizes (0.19-1.23 µm), EE% (25-99%), zeta potential (> -32 mV), and in vitro release rates were dependent on both lipid types and ratios. Higher ratios of Poloxamer 407 preferably formed mixed micelles rather than forming noisome bilayers. Both Compritol and Precirol were deemed to be potential alternatives to cholesterol as bilayer membrane stabilizers. Terbinafine-loaded Compritol and Precirol stabilized niosomes were successfully prepared and demonstrated superior antifungal activities in vitro (inhibition zones) using Candida albicans ATCC 60913.

Using Bio-Layer Interferometry to Evaluate Anti-PEG Antibody-Mediated Complement Activation.

The purpose of this study was to develop a Bio-layer interferometry (BLI) system that could be an alternative approach for the direct evaluation of anti-polyethylene glycol (PEG) immunoglobulin M (IgM)-mediated complement activation of the accelerated blood clearance (ABC) phenomenon. Complement activation is well known to play an important role in the clearance of PEGylated and non-PEGylated nanomedicines following intravenous injection. This complement system is also thought to be responsible for the ABC phenomenon wherein repeated injections of PEGylated products are bound by anti-PEG antibodies. This study used three different sources of anti-PEG antibodies: HIK-M09 monoclonal antibodies (mAbs); HIK-M11 mAbs; and antiserum containing polyclonal anti-PEG IgMs. 1,2-Distearoyl-sn-glycero-3-phosphoethanolamine-n-[methoxy (polyethylene glycol)-2000] (mPEG2000-DSPE) was immobilized as an antigen on aminopropyl silane biosensor chips of BLI. All anti-PEG IgMs in the sources increased the signals (thickness of the layer around the sensor tip) regarding binding of anti-PEG antibodies to PEG on the chips. In all anti-PEG IgM sources, further increases in the signals were observed when incubated in naïve mouse serum, which is a complement source, but not in heat inactivated (56 °C, 30 min) mouse serum, which abolishes complement activity. These findings show that the complement activation mediated via anti-PEG IgMs, which occurred on the sensor chips, was detected via BLI analysis. The complement activation induced by all anti-PEG IgM sources was confirmed via conventional enzyme-linked immunosorbent assay (ELISA), which is the conventional mode for detection of complement activation. Our study results show that BLI is a simple alternative method for the detection of complement activation.

A Novel Curcumin Arginine Salt: A Solution for Poor Solubility and Potential Anticancer Activities.

Curcumin is a natural polyphenolic compound with well-known anticancer properties. Poor solubility and permeability hamper its use as an anticancer pharmaceutical product. In this study, L-arginine, a basic amino acid and a small hydrophilic molecule, was utilized to form a salt with the weak acid curcumin to enhance its solubility and potentiate the anticancer activities of curcumin. Two methods were adopted for the preparation of curcumin: L-arginine salt, namely, physical mixing and coprecipitation. The ion pair or salt was characterized for docking, solubility, DSC, FTIR, XRD, in vitro dissolution, and anticancer activities using MCF7 cell lines. The molecular docking suggested a salt/ion-pair complex between curcumin and L-arginine. Curcumin solubility was increased 335- and 440-fold by curcumin in L-arginine, physical, and co-precipitated mixtures, respectively. Thermal and spectral analyses supported the molecular docking and formation of a salt/ion pair between curcumin and L-arginine. The cytotoxicity of curcumin L-arginine salt significantly improved (p < 0.05) by 1.4-fold, as evidenced by the calculated IC50%, which was comparable to Taxol (the standard anticancer drug but with common side effects).

Preparation and Evaluation of Cubosomes/Cubosomal Gels for Ocular Delivery of Beclomethasone Dipropionate for Management of Uveitis.

PURPOSE: Topical corticosteroids administration is commonly used for management of various ocular conditions especially those affecting the anterior segment of the eye. Poor solubility and limited pre-corneal residence time result in insufficient drug penetration to the outer (cornea and conjunctival-scleral) coats of the eye. This study aimed to prepare and evaluate cubosomes for prolonging residence time and enhancing ocular bioavailability of BDP. METHODS: GMO-cubosomes were prepared using the top-down technique. Two stabilizers were investigated: poloxamer 407 and solulan C24. Particle size, EE %, polarized-light microscopy, TEM, in vitro release, transcorneal permeation, BCOP, histopathology and in vivo evaluation for treatment of uveitis in a rabbits' model were studied. RESULTS: The prepared cubosomes were of nano-sizes (100 nm - 278 nm); EE% was around 94%. The cubosomes were confirmed by visualizing the "Maltese crosses" textures. Transcorneal permeation was significantly (p < 0.05) improved, compared to BDP-suspension (the control formulation). The optimized cubosomes F1P was incorporated in CMC gel (Cubo-gel). The prepared Cubo-gel formulations showed better rheological characteristics and high ocular tolerability. Superior anti-inflammatory properties were recorded for the Cubo-gel for treatment of endotoxin-induced uveitis in the rabbit model when compared to the control BDP-suspension. CONCLUSIONS: Transcorneal permeation parameters Papp and flux and AUC0-10h markedly enhanced by up to 4-, 5.8-and 5.5-fold respectively, compared to the control BDP-suspension formulation. This study suggested that cubosomes/Cubo-gel could be an auspicious ocular delivery system for BDP that was able to effectively treat uveitis (a disease of the posterior segment of the eye).

Vitamin B12 buccoadhesive tablets: auspicious non-invasive substitute for intra muscular injection: formulation, in vitro and in vivo appraisal.

Attempting to prepare a convenient bioavailable formulation of vitamin B12 (cyanocobalamin), 17 tablet formulations were prepared by direct compression. Different concentrations of hydroxypropyl methyl cellulose (HPMC), carbopol 971p (CP971p), and chitosan (Cs) were used. The tablets were characterized for thickness, weight, drug content, hardness, friability, surface pH, in vitro drug release, and mucoadhesion. Kinetic analysis of the release data was conducted. Vitamin B12 bioavailability from the optimized formulations was studied on rabbits by the aid of enzyme-linked immunosorbent assay. Neurotone® I.M. injection was used for comparison. HPMC (F1-F4), CP971p (F5-F8), and HPMC/CP971p (F12-F15)-based formulations showed acceptable mechanical properties. The formulated tablets showed maximum swelling indices of 232 ± 0.13. The surface pH values ranged from 5.3 ± 0.03 to 6.6 ± 0.02. Bioadhesive force ranged from 66 ± 0.6 to 150 ± 0.5 mN. Results showed that CP971p-based tablets had superior in vitro drug release, mechanical, and mucoadhesive properties. In vitro release date of selected formulations were fitted well to Peppas model. HPMC/CP971p-based formulations showed bioavailability up to 2.7-folds that of Neurotone® I.M. injection.

Hyaluronic acid gel-core liposomes (hyaluosomes) enhance skin permeation of ketoprofen.

Since FDA approval of the first transdermal patch in 1979, the utilizing of skin as a route of systemic drug administration has attracted the attention of the formulation scientists. The liposomes research in the area of transdermal drug delivery has been around for decades. This study aimed at comparing the latest gel-core liposomes (hyaluosomes) with nonconventional liposomal systems such as propylene glycol (PG)-liposomes, ethosomes, transferosomes and conventional liposomes loaded with ketoprofen. The modified thin-film hydration method was used to prepare these liposomal systems; size, zeta potential, EE%, TEM, rheological properties, in vitro release and ex vivo permeation studies were performed. Vesicle size and PDI ranged from 160 nm to 700 nm and 0.15 to 0.5, respectively. More interestingly, thermal gelation and shear-thinning characteristics were only recorded with hyaluosomes; while Newtonian behavior and low viscosity values (2 mPas.s to 6 mPa.s) were shown with all other liposomal systems. Hyaluosomes recorded superior (3-fold increases) transdermal permeation characteristics (flux and permeability coefficient), compared with other liposomal systems. With the advancement in liposomal sciences, this study warrants hyaluosomes as a promising transdermal liposomal system for favorable rheological characteristics as well as superior transdermal permeation that proved greater capacity than conventional and other non-conventional liposomal systems.

Investigation into the Emerging Role of the Basic Amino Acid L-Lysine in Enhancing Solubility and Permeability of BCS Class II and BCS Class IV Drugs.

BACKGROUND: The search for a simple and scalable approach that can improve the two key biopharmaceutical processes (solubility and permeability) for BCS Class II and BCS Class IV has still been unmet need. PURPOSE: In this study, L-lysine was investigated as a potential excipient to tackle problems with solubility and permeability. Bendazac (Class II); quercetin and rutin (Class IV) were employed. METHODS: Drugs-lysine complexes in 1:1 M ratios were prepared by co-precipitation and co-grinding; characterized for solubility, partition coefficient, DSC, FTIR, SEM, dissolution rate and permeability. Chemical stability of quercetin-lysine and rutin-lysine was studied by assessing antioxidant capacity using Trolox and CUPRAC assays. RESULTS AND CONCLUSION: Drugs-lysine salt/complexes were confirmed. Solubility enhancement factors ranged from 68- to 433-fold increases and dissolution rates were also significantly enhanced by up to 6-times, compared with drugs alone. With the exception of rutin-lysine, Papp for bendazac-lysine and quercetin-lysine enhanced by 2.3- to 4-fold. Papp for quercetin (Class IV) benefited more than bendazac (Class II) when complexed with lysine. This study warrants the use of L-lysine as a promising excipient for enhanced solubility and permeability of Class II and Class IV, providing that the solubility of the drug is ensured at 'the door step' of absorption sites.

The use of albumin solid dispersion to enhance the solubility of unionizable drugs.

In this study, solid dispersions of prednisolone (PRD) and bovine serum albumin (BSA) were prepared by spray drying and freeze drying methods using a PRD:BSA solution [20:1 molar ratio (MR)]. PRD-BSA dispersed mixtures were characterized by scanning electron microscopy (SEM), and powder X-ray diffraction (XRD), and differential scanning calorimetry (DSC). PRD-BSA physical and dispersed mixtures showed significantly higher solubility in water than that of unprocessed drug. Enhancement factor of six was obtained in both physical mixture and solid dispersion solubility studies. In-vitro dissolution and release studies under physiological conditions showed an immediate release of PRD from the solid dispersions, with almost 90% of the drug dissolved in the first 10 min. PRD was immediately released from BSA binding complex. This study demonstrates the potential for the use of BSA to enhance the solubility and dissolution rate, hence bioavailability, of the unionizable drugs.

Critical appraisal of alternative irritation models: three decades of testing ophthalmic pharmaceuticals.

BACKGROUND: Testing ocular tolerability of ocular pharmaceuticals is an essential regulatory requirement. The current approved reference model (gold standard) for ocular irritation testing is the Draize test. However this method is subjective and involves using live animals, hence the need to develop alternative in vitro and ex vivo testing strategies. SOURCE OF DATA: Pubmed, Science Direct, Scopus, Google Scholar, Medline, Current Content, Web of Science and validation reports from international regulatory bodies; The Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM) and European Centre for the Validation of Alternative Methods (ECVAM) were searched for in vitro alternatives. AREA OF AGREEMENT: Whilst no single in vitro test can effectively replace the Draize eye irritation test, regulatory bodies and cosmetic/pharmaceutical industries agree that there is a need for in vitro alternatives with validated endpoints to evaluate pharmaceutical ingredients and finished eye products. AREA OF CONTROVERSY: There is no single in vitro test / assay that can predict the ocular irritation potential of mild to moderate test substances. AREA TIMELY FOR DEVELOPING RESEARCH: This review provides a critical appraisal of the selected in vitro and ex vivo ocular toxicity models recommended by international regulatory bodies. These include cytotoxicity methods, biochemical systems and ex vivo assays. The latter are approved by ECVAM as in vitro alternatives for the well-known Draize test. Hen's egg test-chorioallantoic membrane and the isolated rabbit eye test are also accepted by regulatory agencies in France, Germany, the Netherlands and the UK. A combination of ex vivo assays along with histological examination of excised bovine cornea can predict the conjunctival and corneal tolerability and cover a wider range of ocular pharmaceutical substances.

Comparative studies for ciprofloxacin hydrochloride pre-formed gels and thermally triggered (in situ) gels: in vitro and in vivo appraisal using a bacterial keratitis model in rabbits.

This article reports on comparative in vitro characterization and in vivo evaluation of pre-formed cellulose-based gels, methylcellulose (MC) and carboxymethylcellulose sodium (CMC) and in situ gel-forming Pluronic F127 (PL) for ocular delivery of ciprofloxacin hydrochloride (Cipro) by using a bacterial keratitis model and histological corneal examination. Drug-polymer interactions were studied employing thermal analysis. Further, different concentrations (1-3% w/w or 10-30% w/w) of gels depending on the nature of the polymer used were prepared, characterized for clarity, pH, rheology and in vitro release. Selected gel formulations were evaluated for ocular delivery to Staphylococcus aureus-infected rabbit corneas; and ocular toxicity through histological examination of the cornea. The results demonstrated no Cipro-polymers physicochemical interactions and pseudoplastic flow for all gels used at 35 °C. Both polymer concentrations and drug solubility in the gels are dominantly the rate-determining factors for in vitro drug release. The corneal healing rate for all gel-based formulations was significantly faster (p < 0.05) than that for Cipro solution-treated rabbits. PL-based gel induced significant swelling/edema of the corneal stroma, compared with MC- and CMC-based gels. In conclusion, cellulose-based polymers have superior ocular tolerability/dramatically less irritant; and superior efficacy with more convenient administration compared with PL and Cipro solution, respectively.

Preparation, characterization and evaluation of novel elastic nano-sized niosomes (ethoniosomes) for ocular delivery of prednisolone.

Niosomes embodying ethanol and minimum amount of cholesterol (ethoniosomes) could be promising ocular delivery systems for water soluble and insoluble drugs. This manuscript reports on novel nano-sized elastic niosomes (ethoniosomes) composed of Span 60: cholesterol (7:3 mol/mol) and ethanol, for ocular delivery of prednisolone acetate (Pred A) and prednisolone sodium phosphate (Pred P). These ethoniosomes were prepared with the thin film hydration (TFH) and ethanol injection (EI) methods, characterized for percentage entrapment efficiency (% EE), size, zeta potential, morphology, elasticity, in vitro release and physical stability. Ocular irritation, bioavailability and anti-inflammatory effects were evaluated and compared with the conventional suspension and solution eye drops. The prepared ethoniosomal vesicles (EV) had a Z-average diameter of 267 nm, zeta potential of approximately -40 mV and % change in size after extrusion of 4%. They were physically stable for at least 2 months at 4 °C. The prepared EV showed good ocular tolerability using the modified Draize's test and the estimated relative ocular bioavailability for Pred A EV and Pred P EV was 1.54 and 1.75 times greater than that for the suspension and solution eye drops, respectively. The time required for complete healing from the clove oil-induced severe ocular inflammation was reduced to half with Pred A and Pred P EV. More interestingly, the intraocular pressure (IOP) elevation side effect recorded for Pred A and Pred P EV was significantly less than that for the conventional suspension and solution eye drops.

A simple and rapid approach to evaluate the in vitro in vivo role of release controlling agent ethyl cellulose ether derivative polymer.

Diclofenac sodium (DCL-Na) conventional oral tablets exhibit serious side effects when given for a longer period leading to noncompliance. Controlled release matrix tablets of diclofenac sodium were formulated using simple blending (F-1), solvent evaporation (F-2) and co-precipitation techniques (F-3). Ethocel® Standard 7 FP Premium Polymer (15%) was used as a release controlling agent. Drug release study was conducted in 7.4 pH phosphate buffer solutions as dissolution medium in vitro. Pharmacokinetic parameters were evaluated using albino rabbits. Solvent evaporation technique was found to be the best release controlling technique thereby prolonging the release rate up to 24 hours. Accelerated stability studies of the optimized test formulation (F-2) did not show any significant change (p<0.05) in the physicochemical characteristics and release rate when stored for six months. A simple and rapid method was developed for DCL-Na active moiety using HPLC-UV at 276nm. The optimized test tablets (F-2) significantly (p<0.05) exhibited peaks plasma concentration (cmax=237.66±1.98) and extended the peak time (tmax=4.63±0.24). Good in-vitro in vivo correlation was found (R(2)=0.9883) against drug absorption and drug release. The study showed that once-daily controlled release matrix tablets of DCL-Na were successfully developed using Ethocel® Standard 7 FP Premium.

Enhancing Oral Bioavailability of Simvastatin Using Uncoated and Polymer-Coated Solid Lipid Nanoparticles.

Simvastatin (SVA) is a well-prescribed drug for treating cardiovascular and hypercholesterolemia. Due to the extensive hepatic first-pass metabolism and poor solubility, its oral bioavailability is 5%. Solid lipid nanoparticles (SLNs) and hydrogel-coated SLNs were investigated to overcome the limited bioavailability of SVA. Four different lipids used alone or in combination with two stabilizers were employed to generate 13 SLNs. Two concentrations of chitosan (CS) and alginate (AL) were coating materials. SLNs were studied for particle size, zeta potential, in vitro release, rheology, and bioavailability. The viscosities of both the bare and coated SLNs exhibited shear-thinning behavior. The viscosity of F11 (Chitosan 1%) at 20 and 40 rpm were 424 and 168 cp, respectively. F11 had a particle size of 260.1 ± 3.72 nm with a higher release; the particle size of F11-CS at 1% was 524.3 ± 80.31 nm. In vivo studies illustrated that F11 had the highest plasma concentration when compared with the SVA suspension and coated chitosan (F11 (Chitosan 1%)). Greater bioavailability is measured as (AUC0→24), as compared to uncoated ones. The AUC for F11, F11-CS 1%, and the SVA suspension were 1880.4, 3562.18, and 272 ng·h/mL, respectively. Both bare and coated SLNs exhibited a significantly higher relative bioavailability when compared to that from the control SVA.

Cyclodextrins and Amino Acids Enhance Solubility and Tolerability of Retinoic Acid/Tretinoin: Molecular Docking, Physicochemical, Cytotoxicity, Scratch Assay, and Topical Gel Formulations Investigation.

With increasing longevity globally, the search for effective and patient-friendly anti-aging solutions has been growing. Retinoic acid (Ret) is an FDA-approved anti-aging and anti-wrinkling formula, however, its poor solubility and poor tolerability hamper its use in cosmetically accepted formulations. In this study, cyclodextrins and arginine were investigated for improving the solubility and tolerability of retinoic acid through the formation of inclusion complexes and salt formation, respectively. Two different methods were employed: physical mixing and kneading. The prepared dispersions were investigated for molecular docking (MD), solubility, thermal and spectral analyses, cytotoxicity, and scratch assays. The optimized disperse systems were formulated in a gel formulation and characterized for rheological, in vitro release, and kinetics. The MD, DSC, and FTIR results indicated that both ß- and hydroxy propyl (HP) ß-cyclodextrins could host RA in their cavities and form inclusion complexes. Ret can form a salt with the basic amino acid arginine. Solubility studies of RA significantly (p < 0.01) enhanced by 14- to 81-fold increases with the investigated cyclodextrins and arginine. The cell viability recorded for Ret:HP ß-CD K and Ret:arginine K was significantly increased compared to that for Ret alone. The IC50% recorded for azelaic acid (mild to non-irritant control), Ret, Ret:HP ß-CD K, and Ret:arginine K were 1000, 485, 1100, and 895 µg/mL, respectively. The two carriers (HP ß-CD and the amino acid arginine) were able to significantly (p < 0.05) reduce the irritation potential of Ret. Furthermore, comparable gap closure rates were recorded for Ret alone, Ret:HP ß-CD K, and Ret:arginine K, indicating that inclusion complexation and ion pair formation reduced the irritation potentials without undermining the efficacy.

Non-invasive caffeinated-nanovesicles as adipocytes-targeted therapy for cellulite and localized fats.

Caffeine (CAF) is a non-selective adenosine A1 receptor antagonist which predominates in fat cells. When CAF binds to adenosine receptors, it increases cyclic adenosine monophosphate; inhibiting adipogenesis and inducing fat lipolysis. Resveratrol (RSV) is an antioxidant polyphenol possessing different anti-obesity mechanisms. Topical application of both hydrophilic CAF and lipophilic RSV is limited. This study aimed to develop novel caffeinated-resveratrol bilosomes (CRB) and caffeine-bilosomes (CB) that could non-invasively target and deposit in fat cells. RSV bilosomes (RB) were prepared as a non-targeted system for comparison. CRB showed nanosize (364.1 nm ±6.5 nm) and high entrapment for both active compounds. Rats treated topically with CRB revealed a significant decrease (P = 0.039) in body weight. Histological analysis of the excised skin demonstrated a reduction in the subcutaneous fatty layer thickness and a decrease in the size of connective tissue-imbedded fat cells. Kidney histological examination of RB-treated rats showed subcapsular tubular epithelial cells with cytoplasmic vacuolation. This reflects a systemic effect of RSV from the non-targeted RB compared to CRB, which had a targeting effect on the adipose tissue. In conclusion, CAF in CRB significantly enhanced RSV deposition in adipose tissue and assisted its local-acting effect for managing obesity and cellulite.

Recent Advances in Long-Acting Drug Delivery and Formulations.

Conventional immediate-release delivery systems are simple, industrially reproducible, acceptable, and easy-to-use by most patients [...].

Formulation and In-Vitro/Ex-Vivo Characterization of Pregelled Hybrid Alginate-Chitosan Microparticles for Ocular Delivery of Ketorolac Tromethamine.

Innovative hybrid chitosan-sodium alginate (Ch-Ag) microparticles (MPs) were fabricated using both the ionic gelation method as well as the pre-gelation technique. The hybrid Ch-Ag MPs were studied for size, zeta potential, morphology, mucoadhesion, in-vitro release, corneal permeation, and ocular irritation using lens and corneal epithelial cell lines. The average particle size ranged from 1322 nm to 396 nm. The zeta potential for the prepared formulations showed an increase with increasing Ch concentrations up to a value of >35 mV; the polydispersity index (PDI) of some optimized MPs was around 0.1. Compared to drug-free MPs, ketorolac-loaded Ch-Ag MPs demonstrated a drug proportion-dependent increase in their size. SEM, as well as TEM of KT-loaded MPs, confirmed that the formed particles were quasi-spherical to elliptical in shape. The KT release from the MPs demonstrated a prolonged release profile in comparison to the control KT solution. Further, mucoadhesion studies with porcine mucin revealed that the KT-loaded MPs had effective mucoadhesive properties, and polymeric particles were stable in the presence of mucin. Corneal permeation was studied on bovine eyes, and the results revealed that Ch-based MPs were capable of showing more sustained KT release across the cornea compared with that for the control drug solution. Conclusively, the cytotoxicity assay confirmed that the investigated MPs were non-irritant and could confer protection from direct drug irritation of KT on the ocular surface. The MTT cytotoxicity assay confirmed that KT-loaded MPs showed acceptable and reasonable tolerability with both human lens and corneal epithelial cell lines compared to the control samples.

Preformulation-Assisted Design of Ketorolac Tromethamine for Effective Ophthalmic Delivery.

Background: The eye is a highly protected organ from ocularly administered drugs; drug- and formulation-related factors contribute significantly to ocular bioavailability. There has been a growing interest in using nonsteroidal anti-inflammatory drugs in ophthalmology for treating postoperative pain, inflammation, and seasonal allergic conjunctivitis. A preformulation-assisted design boosts efficacy and reduces dose requirements. Methods: This work aims to study the preformulation characteristics of ketorolac tromethamine to improve ocular performance and future formulation development through developing an high-performance liquid chromatography (HPLC) stability-indicating assay, forced degradation under stress conditions, solubility, as well as partition and distribution coefficient measurements. An isocratic HPLC with diode array detector method was developed and validated. Accelerated degradation under different stressors (acid, alkali, heat, and oxidative) was studied. In addition, solubility, partition, and distribution were investigated at different pHs of 3.5-7.4. Results: The results indicated that the developed HPLC method was simple, rapid (retention time ≃3 min), sensitive, selective, robust, and stability indicating. The drug seems more chemically sensitive to acid degradation (∼30% and 40% of the drug was degraded under 0.1 M and 1 M HCl at 60°C for 24 h, respectively). Another significant degradation was recorded in the following order: Oxidative > alkali > heat (phosphate-buffered saline) > heat (distilled water). Being a weak ionizable drug, both water and lipid solubility, as measured through partition coefficients, it demonstrated pH-dependency. Conclusion: For the optimum balance of water and lipid solubility required for penetration through the lipophilic corneal epithelial barrier, ketorolac eye drops would be better formulated between pH 5.5 and 6.6 than being formulated at the physiological fluid pH 7.4, where the drug is extremely hydrophilic and less permeable.

Recent Advances of Ocular Drug Delivery Systems: Prominence of Ocular Implants for Chronic Eye Diseases.

Chronic ocular diseases can seriously impact the eyes and could potentially result in blindness or serious vision loss. According to the most recent data from the WHO, there are more than 2 billion visually impaired people in the world. Therefore, it is pivotal to develop more sophisticated, long-acting drug delivery systems/devices to treat chronic eye conditions. This review covers several drug delivery nanocarriers that can control chronic eye disorders non-invasively. However, most of the developed nanocarriers are still in preclinical or clinical stages. Long-acting drug delivery systems, such as inserts and implants, constitute the majority of the clinically used methods for the treatment of chronic eye diseases due to their steady state release, persistent therapeutic activity, and ability to bypass most ocular barriers. However, implants are considered invasive drug delivery technologies, especially those that are nonbiodegradable. Furthermore, in vitro characterization approaches, although useful, are limited in mimicking or truly representing the in vivo environment. This review focuses on long-acting drug delivery systems (LADDS), particularly implantable drug delivery systems (IDDS), their formulation, methods of characterization, and clinical application for the treatment of eye diseases.

Exploration of the Safety and Solubilization, Dissolution, Analgesic Effects of Common Basic Excipients on the NSAID Drug Ketoprofen.

Since its introduction to the market in the 1970s, ketoprofen has been widely used due to its high efficacy in moderate pain management. However, its poor solubility and ulcer side effects have diminished its popularity. This study prepared forms of ketoprofen modified with three basic excipients: tris, L-lysine, and L-arginine, and investigated their ability to improve water solubility and reduce ulcerogenic potential. The complexation/salt formation of ketoprofen and the basic excipients was prepared using physical mixing and coprecipitation methods. The prepared mixtures were studied for solubility, docking, dissolution, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), in vivo evaluation for efficacy (the writhing test), and safety (ulcerogenic liability). Phase solubility diagrams were constructed, and a linear solubility (AL type) curve was obtained with tris. Docking studies suggested a possible salt formation with L-arginine using Hirshfeld surface analysis. The order of enhancement of solubility and dissolution rates was as follows: L-arginine > L-lysine > tris. In vivo analgesic evaluation indicated a significant enhancement of the onset of action of analgesic activities for the three basic excipients. However, safety and gastric protection indicated that both ketoprofen arginine and ketoprofen lysine salts were more favorable than ketoprofen tris.