Application of artificial intelligence for the optimization of advanced oxidation processes to improve the water quality polluted with pharmaceutical compounds.

Sulfamethoxazole and metronidazole are emerging pollutants commonly found in surface water and wastewater. These compounds have a significant environmental impact, being necessary in the design of technologies for their removal. Recently, the advanced oxidation process has been proven successful in the elimination of this kind of compounds. In this sense, the present work discusses the application of UV/H2O2 and ozonation for the degradation of both molecules in single and binary systems. Experimental kinetic data from O3 and UV/H2O2 process were adequately described by a first and second kinetic model, respectively. From the ANOVA analysis, it was determined that the most statistically significant variables were the initial concentration of the drugs (0.03 mmol L-1) and the pH = 8 for UV/H2O2 system, and only the pH (optimal value of 6) was significant for degradation with O3. Results showed that both molecules were eliminated with high degradation efficiencies (88-94% for UV/H2O2 and 79-98% for O3) in short reaction times (around 30-90 min). The modeling was performed using a quadratic regression model through response surface methodology representing adequately 90 % of the experimental data. On the other hand, an artificial neural network was used to evaluate a non-linear multi-variable system, a 98% of fit between the model and experimental data was obtained. The identification of degradation byproducts was performed by high-performance liquid chromatography coupled to a time mass detector. After each process, at least four to five stable byproducts were found in the treated water, reducing the mineralization percentage to 20% for both molecules.

Synthesis of bifunctional nanostructured adsorbents based on anionic/cationic clays: effect of arrangement on simultaneous adsorption of cadmium and arsenate.

The development of bifunctional hybrid materials based on natural clays and layered double hydroxide (LDH) and their application on the simultaneous adsorption of Cd(II) and As(V) was investigated in this work. Two different synthesis routes, in situ and assembly, were employed to obtain the hybrid materials. Three types of natural clays, namely bentonite (B), halloysite (H), and sepiolite (S), were used in the study. These clays are characterized by a laminar, tubular, and fibrous structural arrangement, respectively. The physicochemical characterization results indicate that the hybrid materials were formed through interactions between the Al-OH and Si-OH groups present in the natural clays, and the Mg-OH and Al-OH groups present in the LDH for both synthesis routes. However, the "in situ" route yields a more homogenous material because the LDH formation is performed on the natural clay surface. The hybrid materials showed an anion and cation exchange capacity up to 200.7 meq/100 g and an isoelectric point near 7. The arrangement of natural clay has no impact on the properties of hybrid material but influences the adsorption capacity. The adsorption of Cd(II) onto hybrid materials was enhanced in comparison with natural clays, obtaining adsorption capacities of 80, 74, 65, and 30 mg/g for 15:1 (LDH:H)INSITU, 1:1 (LDH:S)INSITU, 1:1 (LDH:B)INSITU, and 1:1 (LDH:H)INSITU, respectively. The adsorption capacities of hybrid materials to adsorb As(V) were between 20 and 60 µg/g. The 15:1 (LDH:H)INSITU sample showed the best adsorption capacity being ten folds greater than halloysite and LDH. In all cases, the hybrid materials showed a synergistic effect for Cd(II) and As(V) adsorption. The adsorption study of Cd(II) onto hybrid materials showed that the primary adsorption mechanism is cation exchange between the interlayer cations in natural clay and Cd(II) in the aqueous solution. The adsorption of As(V) showed that the adsorption mechanism is attributed to anion exchange between CO23- in the interlayer space of LDH and H2ASO4- in the solution. The simultaneous adsorption of As (V) and Cd (II) shows that, during the As(V) adsorption, there is no competition by the adsorption sites. Still, the adsorption capacity towards Cd(II) was enhanced 1.2-folds. This study ultimately revealed that the arrangement of clay has a significant influence on the adsorption capacity of the hybrid material. This can be attributed to the similar morphology between the hybrid material and natural clays, as well as the important diffusion effects observed in the system.

A systematic review on the current situation of emerging pollutants in Mexico: A perspective on policies, regulation, detection, and elimination in water and wastewater.

Emerging pollutants (EPs) emerged as a group of new compounds whose presence in the environment has been widely detected in Mexico. In this country, different concentrations of pharmaceutical compounds, pesticides, dyes, and microplastics have been reported, which vary depending on the region and the analyzed matrix (i.e., wastewater, surface water, groundwater). The evidence of the EPs' presence focuses on the detection of them, but there is a gap in information regarding is biomonitoring and their effects in health in Mexico. The presence of these pollutants in the country associated with lack of proper regulations in the discharge and disposal of EPs. Therefore, this review aims to provide a comprehensive view of the current environmental status, policies, and frameworks regarding Mexico's situation. The review also highlights the lack of information about biomonitoring since EPs are present in water even after their treatment, leading to a critical situation, which is high exposure to humans and animals. Although, technologies to efficiently eliminate EPs are available, their application has been reported only at a laboratory scale thus far. Here, an overview of health and environmental impacts and a summary of the research works reported in Mexico from 2014 to 2023 were presented. This review concludes with a concrete point of view and perspective on the status of the EPs' research in Mexico as an alert for government entities about the necessity of measures to control the EPs disposal and treatment.

Elucidation of adsorption mechanisms and mass transfer controlling resistances during single and binary adsorption of caffeic and chlorogenic acids.

In this work, the potential of activated carbon to remove caffeic and chlorogenic acids in aqueous solution was investigated. The study focused on evaluating the single and binary adsorption equilibrium, as well as investigating the mass transfer resistances present during the process by applying diffusional models for a future scale-up of the process. For both compounds, the single adsorption equilibrium was studied at pH values of 3, 5, and 7. The experimental adsorption isotherms were interpreted using the Langmuir and Freundlich models, obtaining maximum adsorption capacities of 1.33 and 1.62 mmol/g for caffeic and chlorogenic acid, respectively. It was found that the adsorption mechanisms for both compounds were derived from π-π, electrostatic, and H-bonding interactions. Also, the binary adsorption equilibrium was performed, and the experimental data were interpreted using the extended multicomponent Langmuir model. The results evidenced that the binary adsorption of caffeic acid and chlorogenic acid is antagonistic in nature. Finally, the experimental adsorption rate data were interpreted by an external mass transport model and a diffusional model, finding that the overall adsorption rate is governed by intraparticle diffusion. Moreover, the surface and pore volume diffusion mechanisms were meaningful.

Novel meso-polyarylamine-BODIPY hybrids: synthesis and study of their optical properties.

A series of 14 meso-polyarylamine-BODIPY (borondipyrromethene) hybrids of the general structure A were synthesized. Two methods were used to prepare them. The first protocol involved a direct Liebeskind-Srogl cross-coupling of thiomethylbodipys 1-2 with arylaminoboronic acids (4 examples, 75-98%). The second method involves a two-step sequence: a Liebeskind-Srogl reaction to prepare 6 meso-bromoarylbodipys (58-83%) followed by a Suzuki coupling of these Br-containing BODIPYs with arylaminoboronic acids (10 examples, 44-84%). Seven of these derivatives displayed emission in the near-infrared region. The optical properties of compound 18 were rationalized in terms of its crystal structure.

3- and 5-Functionalized BODIPYs via the Liebeskind-Srogl reaction.

Chemoselective cross-coupling reactions were demonstrated for C-S bonds in the BODIPY dyes 1 and 4, and similar reactions were applied to make the two-dye cassette system 11.

Selective cross-couplings. Sequential Stille-Liebeskind/Srogl reactions of 3-chloro-4-arylthiocyclobutene-1,2-dione.

The synthesis and initial reactivity studies of 2 are described. It was found that it participates in Stille couplings exclusively at the C-Cl site with a number of organostannanes (58-71% yield) in the absence of Cu(I). Then, these new derivatives were functionalized at the C-S site with boronic acids by switching to the Liebeskind-Srogl reaction conditions (in the presence of a Cu(I) carboxylate) to yield the bifunctionalized cyclobutenediones (44-90% yield).

Simple, general, and efficient synthesis of meso-substituted borondipyrromethenes from a single platform.

An unprecedented synthesis of 8-substituted-borondipyrromethenes is described starting from 8-thiomethylbodipy 1. Aryl, heteroaryl, alkenyl, and organometallic boronic acids smoothly reacted with 1 in the presence of a catalytic amount of Pd(0) and a stoichiometric amount of Cu(I)-2-thienylcarboxylate under neutral conditions to give the corresponding Bodipy analogues in good to quantitative yields (20 examples). A remarkable reactivity was observed in some cases, e.g., ferrocenylboronic acid gave the product in 98% isolated yield after only 10 min at 55 degrees C.

A turn-on fluorescent solid-sensor for Hg(II) detection.

A rhodamine organosilane derivative (Rh-UTES) has been obtained by one-pot synthesis. The chemical structure of Rh-UTES was confirmed by nuclear magnetic resonance (NMR) and infrared (FTIR) techniques. To obtain an inorganic-organic hybrid sensor, Rh-UTES was covalently immobilized on a porous silicon microcavity (PSiMc) via triethoxysilane groups. The attachment of the organic derivative into PSiMc was confirmed by FTIR, specular reflectance, and scanning electron microscopy (SEM). The optical performance of Rh-UTES receptor for Hg(2+) detection was investigated by fluorescent spectroscopy and microscopy. Upon the addition of increasing amounts of Hg(2+) ions, a remarkable enhancement in emission intensity was produced in both systems. In the solid phase, an increase of integrated fluorescent emission of 0.12- and 0.15-fold after Hg(2+) receptor coordination was observed. The light harvesting capability of PSiMc devices allowed obtaining an enhanced fluorescent emission after Rh-UTES immobilization (277-fold). The fluorescence microscopy of hybrid PSiMc sensor provided an optical qualitative test for Hg(2+) detection.

C-H bond functionalization in the synthesis of fused 1,2,3-triazoles.

A highly modular approach to fused 1,2,3-triazoles has been developed featuring a one-pot procedure combining copper(I) catalyzed azide-alkyne cycloaddition and palladium-catalyzed C-H bond functionalization. A class of structurally unique heterocycles was synthesized in good yields.

Pd-catalyzed, Cu(I)-mediated cross-couplings of bisarylthiocyclobutenediones with boronic acids and organostannanes.

Bisarylthiocyclobutenedione 7 reacted smoothly with a variety of both organostannanes and (hetero)arylboronic acids in the presence of a catalytic amount of Pd and a stoichiometric amount of CuTC to produce symmetrical disubstituted cyclobutenediones in yields that range from 37 to 94% (18 examples).

Ferrocenylketene and ferrocenyl-1,2-bisketenes: direct observation and reactivity measurements.

[Structure: see text]. Ferrocenylketene (1) is calculated to be destabilized by 1.6 kcal/mol relative to phenylketene (10) by B3LYP isodesmic comparison to the corresponding alkenes. Ketene 1 generated by Wolff rearrangement in CH3CN is identified by the IR band at 2119 cm(-1) and has a rate constant for reaction with n-BuNH2 less than that for 10 by a factor of 5. 1,2-Bisferrocenyl-1,2-bisketene 18 and 1-ferrocenyl-2-trimethylsilyl-1,2-bisketene 21 were prepared by photochemical ring opening of the corresponding cyclobutenediones, and 18 undergoes rapid ring closure 67 times faster than the corresponding 1,2-diphenyl-1,2-bisketene, while bisketene 21 is longer lived than 18 by a factor of 3.2 x 10(4).