Buckling of dielectric elastomeric plates for soft, electrically active microfluidic pumps.

Elastic instabilities, when properly implemented within soft, mechanical structures, can generate advanced functionality. In this work, we use the voltage-induced buckling of thin, flexible plates to pump fluids within a microfluidic channel. The soft electrodes that enable electrical actuation are compatible with fluids, and undergo large, reversible deformations. We quantified the onset of voltage-induced buckling, and measured the flow rate within the microchannel. This embeddable, flexible microfluidic pump will aid in the generation of new stand-alone microfluidic devices that require a tunable flow rate.

Directed motion of colloidal particles in a galvanic microreactor.

The mechanisms leading to the deposition of colloidal particles in a copper-gold galvanic microreactor are investigated. Using in situ current density measurements and particle velocimetry, we establish correlations between the spatial arrangement and the geometry of the electrodes, current density distribution, and particle aggregation behavior. Ionic transport phenomena are responsible for the occurrence of strongly localized high current density at the edges and corners of the copper electrodes at large electrode separation, leading to a preferential aggregation of colloidal particles at the electrode edges. Preferential aggregation appears to be the result of a combination of electrophoretic effects and changes in bulk electrolyte flow patterns. We demonstrate that electrolyte flow is most likely driven by electrochemical potential gradients of reaction products formed during the inhomogeneous copper dissolution.

Dispersion stability of functionalized graphene in aqueous sodium dodecyl sulfate solutions.

The colloidal stability of functionalized graphene sheets (FGSs) in aqueous sodium dodecyl sulfate (SDS) solutions of different concentrations was studied by optical microscopy and ultraviolet-visible light absorption after first dispersing the FGSs ultrasonically. In up to ∼10 µM SDS solutions, FGSs reaggregated within a few minutes, forming ramified structures in the absence of SDS and increasingly compact structures as the amount of SDS increased. Above ∼10 µM, the rate of reaggregation decreased with increasing SDS concentration; above ∼40 µM, the suspensions were colloidally stable for over a year. The concentration of ∼40 µM SDS lies 2 orders of magnitude below the critical surface aggregation concentration of ∼1.8 mM SDS on FGSs but above the concentration (∼18 µM) at which SDS begins to form a monolayer on FGSs. Neither surface micelle nor dense monolayer coverage is therefore required to obtain stable aqueous FGS dispersions. We support our experimental results by calculating the van der Waals and electrostatic interaction energies between FGSs as a function of SDS concentration and show that the experimentally observed transition from an unstable to a stable dispersion correlates with a transition from negative to positive interaction energies between FGSs in the aggregated state. Furthermore, our calculations support experimental evidence that aggregates tend to develop a compact structure over time.

Enhanced thermal decomposition of nitromethane on functionalized graphene sheets: ab initio molecular dynamics simulations.

The burning rate of the monopropellant nitromethane (NM) has been observed to increase by adding and dispersing small amounts of functionalized graphene sheets (FGSs) in liquid NM. Until now, no plausible mechanisms for FGSs acting as combustion catalysts have been presented. Here, we report ab initio molecular dynamics simulations showing that carbon vacancy defects within the plane of the FGSs, functionalized with oxygen-containing groups, greatly accelerate the thermal decomposition of NM and its derivatives. This occurs through reaction pathways involving the exchange of protons or oxygens between the oxygen-containing functional groups and NM and its derivatives. FGS initiates and promotes the decomposition of the monopropellant and its derivatives, ultimately forming H(2)O, CO(2), and N(2). Concomitantly, oxygen-containing functional groups on the FGSs are consumed and regenerated without significantly changing the FGSs in accordance with experiments indicating that the FGSs are not consumed during combustion.

Local voltage drop in a single functionalized graphene sheet characterized by Kelvin probe force microscopy.

We studied the local voltage drop in functionalized graphene sheets of subµm size under external bias conditions by Kelvin probe force microscopy. Using this noninvasive experimental approach, we measured ohmic current-voltage characteristics and an intrinsic conductivity of about 3.7 × 10(5) S/m corresponding to a sheet resistance of 2.7 kΩ/sq under ambient conditions for graphene produced via thermal reduction of graphite oxide. The contact resistivity between functionalized graphene and metal electrode was found to be <6.3 × 10(-7) Ωcm(2).

Hierarchically porous graphene as a lithium-air battery electrode.

The lithium-air battery is one of the most promising technologies among various electrochemical energy storage systems. We demonstrate that a novel air electrode consisting of an unusual hierarchical arrangement of functionalized graphene sheets (with no catalyst) delivers an exceptionally high capacity of 15000 mAh/g in lithium-O(2) batteries which is the highest value ever reported in this field. This excellent performance is attributed to the unique bimodal porous structure of the electrode which consists of microporous channels facilitating rapid O(2) diffusion while the highly connected nanoscale pores provide a high density of reactive sites for Li-O(2) reactions. Further, we show that the defects and functional groups on graphene favor the formation of isolated nanosized Li(2)O(2) particles and help prevent air blocking in the air electrode. The hierarchically ordered porous structure in bulk graphene enables its practical applications by promoting accessibility to most graphene sheets in this structure.

Stabilization of electrocatalytic metal nanoparticles at metal-metal oxide-graphene triple junction points.

Carbon-supported precious metal catalysts are widely used in heterogeneous catalysis and electrocatalysis, and enhancement of catalyst dispersion and stability by controlling the interfacial structure is highly desired. Here we report a new method to deposit metal oxides and metal nanoparticles on graphene and form stable metal-metal oxide-graphene triple junctions for electrocatalysis applications. We first synthesize indium tin oxide (ITO) nanocrystals directly on functionalized graphene sheets, forming an ITO-graphene hybrid. Platinum nanoparticles are then deposited, forming a unique triple-junction structure (Pt-ITO-graphene). Our experimental work and periodic density functional theory (DFT) calculations show that the supported Pt nanoparticles are more stable at the Pt-ITO-graphene triple junctions. Furthermore, DFT calculations suggest that the defects and functional groups on graphene also play an important role in stabilizing the catalysts. These new catalyst materials were tested for oxygen reduction for potential applications in polymer electrolyte membrane fuel cells, and they exhibited greatly enhanced stability and activity.

Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries.

A functionalized graphene sheet-sulfur (FGSS) nanocomposite was synthesized as the cathode material for lithium-sulfur batteries. The structure has a layer of functionalized graphene sheets/stacks (FGS) and a layer of sulfur nanoparticles creating a three-dimensional sandwich-type architecture. This unique FGSS nanoscale layered composite has a high loading (70 wt%) of active material (S), a high tap density of ∼0.92 g cm(-3), and a reversible capacity of ∼505 mAh g(-1) (∼464 mAh cm(-3)) at a current density of 1680 mA g(-1) (1C). When coated with a thin layer of cation exchange Nafion film, the migration of dissolved polysulfide anions from the FGSS nanocomposite was effectively reduced, leading to a good cycling stability of 75% capacity retention over 100 cycles. This sandwich-structured composite conceptually provides a new strategy for designing electrodes in energy storage applications.

Sensitive immunosensor for cancer biomarker based on dual signal amplification strategy of graphene sheets and multienzyme functionalized carbon nanospheres.

A novel electrochemical immunosensor for sensitive detection of cancer biomarker alpha-fetoprotein (AFP) is described that uses a graphene sheet sensor platform and functionalized carbon nanospheres (CNSs) labeled with horseradish peroxidase-secondary antibodies (HRP-Ab2). Greatly enhanced sensitivity for the cancer biomarker is based on a dual signal amplification strategy: first, the synthesized CNSs yielded a homogeneous and narrow size distribution, which allowed several binding events of HRP-Ab2 on each nanosphere. Enhanced sensitivity was achieved by introducing the multibioconjugates of HRP-Ab2-CNSs onto the electrode surface through "sandwich" immunoreactions. Second, functionalized graphene sheets used for the biosensor platform increased the surface area to capture a large amount of primary antibodies (Ab1), thus amplifying the detection response. On the basis of the dual signal amplification strategy of graphene sheets and the multienzyme labeling, the developed immunosensor showed a 7-fold increase in detection signal compared to the immunosensor without graphene modification and CNSs labeling. The proposed method could respond to 0.02 ng mL(-1) AFP with a linear calibration range from 0.05 to 6 ng mL(-1). This amplification strategy is a promising platform for clinical screening of cancer biomarkers and point-of-care diagnostics.

Tuning of structural color using a dielectric actuator and multifunctional compliant electrodes.

We have developed electrically conducting silicone elastomer nanocomposites that serve both as compliant electrodes in an electrostatic actuator and, at the same time, as optically active elements creating structural color. We demonstrate the capabilities of our setup by actuating an elastomeric diffraction grating and colloidal-crystal-based photonic structures.

Effect of surface polarity on the structure and dynamics of water in nanoscale confinement.

We present a molecular dynamics simulation study of the structure and dynamics of water confined between silica surfaces using beta-cristobalite as a model template. We scale the surface Coulombic charges by means of a dimensionless number, k, ranging from 0 to 1, and thereby we can model systems ranging from hydrophobic apolar to hydrophilic, respectively. Both rotational and translational dynamics exhibit a nonmonotonic dependence on k characterized by a maximum in the in-plane diffusion coefficient, D||, at values between 0.6 and 0.8, and a minimum in the rotational relaxation time, tauR, at k=0.6. The slow dynamics observed in the proximity of the hydrophobic apolar surface are a consequence of beta-cristobalite templating an ice-like water layer. The fully hydrophilic surfaces (k=1.0), on the other hand, result in slow interfacial dynamics due to the presence of dense but disordered water that forms strong hydrogen bonds with surface silanol groups. Confinement also induces decoupling between translational and rotational dynamics, as evidenced by the fact that tauR attains values similar to that of the bulk, while D|| is always lower than in the bulk. The decoupling is characterized by a more drastic reduction in the translational dynamics of water compared to rotational relaxation.

Evolution from surface-influenced to bulk-like dynamics in nanoscopically confined water.

We use molecular dynamics simulations to study the influence of confinement on the dynamics of a nanoscopic water film at T = 300 K and rho = 1.0 g cm(-3). We consider two infinite hydrophilic (beta-cristobalite) silica surfaces separated by distances between 0.6 and 5.0 nm. The width of the region characterized by surface-dominated slowing down of water rotational dynamics is approximately 0.5 nm, while the corresponding width for translational dynamics is approximately 1.0 nm. The different extent of perturbation undergone by the in-plane dynamic properties is evidence of rotational-translational decoupling. The local in-plane rotational relaxation time and translational diffusion coefficient collapse onto confinement-independent "master" profiles as long as the separation d >or= 1.0 nm. Long-time tails in the perpendicular component of the dipole moment autocorrelation function are indicative of anisotropic behavior in the rotational relaxation.

Dissolution dynamics of thin films measured by optical reflectance.

Measuring the dissolution dynamics of thin films in situ both with spatial and temporal resolution can be a challenging task. Available methods such as scanning electrochemical microscopy rely on scanning the specimen and are intrinsically slow. We developed a characterization technique employing only an optical microscope, a digital charge coupled device camera, and a computer for image processing. It is capable of detecting dissolution rates of the order of nm/min and has a spatial and temporal resolution which is limited by the imaging and recording setup. We demonstrate the capabilities of our method by analyzing the electrochemical dissolution of copper thin films on gold substrates in a mild hydrochloric acid solution. Due to its simplicity, our technique can be implemented in any laboratory and can be applied to a variety of systems such as thin film sensors or passive coatings.

Influence of atmospheric species on the electrical properties of functionalized graphene sheets.

We report on the time-dependent influence of atmospheric species on the electrical properties of functionalized graphene sheets (FGSs). When exposed to laboratory air, FGSs exhibit a significant, irreversible decrease in electrical conductance with time, strongly depending on the oxygen content of the FGSs. To separate the roles of charge carrier density and mobility in this aging process, we performed electron transport measurements using a back-gate field-effect transistor architecture. Investigating the position of the Dirac point under different atmospheres, we found that adsorbed atmospheric species result in pronounced p-doping, which - on a short time scale - can be reversed under nitrogen atmosphere. However, on a time scale of several days, the resistance increases irreversibly, while the Dirac point voltage remains constant. From these experiments, we conclude that the aging of FGSs is related to the chemisorption of atmospheric species leading to enhanced carrier scattering due to an increasing amount of sp3- regions and thus to a reduced charge carrier mobility.

Surfactant aggregates at rough solid-liquid interfaces.

We demonstrate improved atomic force microscopic imaging of surfactant surface aggregates, featuring an increase in the topography contrast by several hundred percent with respect to all previous studies. Surfactant aggregates on rough gold surfaces, which could not be imaged previously because of low resolution, display substantially different morphologies when compared with atomically smooth materials.

Anisotropic adsorption of molecular assemblies on crystalline surfaces.

Orientational order of surfactant micelles and proteins on crystalline templates has been observed but, given that the template unit cell is significantly smaller than the characteristic size of the adsorbate, this order cannot be attributed to lattice epitaxy. We interpret the template-directed orientation of rodlike molecular assemblies as arising from anisotropic van der Waals interactions between the assembly and crystalline surfaces where the anisotropic van der Waals interaction is calculated using the Lifshitz methodology. Provided the assembly is sufficiently large, substrate anisotropy provides a torque that overcomes rotational Brownian motion near the surface. The probability of a particular orientation is computed by solving a Smoluchowski equation that describes the balance between van der Waals and Brownian torques. Torque aligns both micelles and protein fibrils; the interaction energy is minimized when the assembly lies perpendicular to a symmetry axis of a crystalline substrate. Theoretical predictions agree with experiments for both hemi-cylindrical micelles and protein fibrils adsorbed on graphite.

Functionalized single graphene sheets derived from splitting graphite oxide.

A process is described to produce single sheets of functionalized graphene through thermal exfoliation of graphite oxide. The process yields a wrinkled sheet structure resulting from reaction sites involved in oxidation and reduction processes. The topological features of single sheets, as measured by atomic force microscopy, closely match predictions of first-principles atomistic modeling. Although graphite oxide is an insulator, functionalized graphene produced by this method is electrically conducting.

Concentration Fluctuations and Capacitive Response in Dense Ionic Solutions.

We use molecular dynamics simulations in a constant potential ensemble to study the effects of solution composition on the electrochemical response of a double layer capacitor. We find that the capacitance first increases with ion concentration following its expected ideal solution behavior but decreases upon approaching a pure ionic liquid in agreement with recent experimental observations. The nonmonotonic behavior of the capacitance as a function of ion concentration results from the competition between the independent motion of solvated ions in the dilute regime and solvation fluctuations in the concentrated regime. Mirroring the capacitance, we find that the characteristic decay length of charge density correlations away from the electrode is also nonmonotonic. The correlation length first decreases with ion concentration as a result of better electrostatic screening but increases with ion concentration as a result of enhanced steric interactions. When charge fluctuations induced by correlated ion-solvent fluctuations are large relative to those induced by the pure ionic liquid, such capacitive behavior is expected to be generic.

Intrinsic Catalytic Activity of Graphene Defects for the Co(II/III)(bpy)3 Dye-Sensitized Solar Cell Redox Mediator.

We demonstrate that functionalized graphene, rich with lattice defects but lean with oxygen sites, catalyzes the reduction of Co(III)(bpy)3 as well as platinum does, exhibiting a rate of heterogeneous electron transfer, k0, of ∼6 × 10(-3) cm/s. We show this rate to be an order of magnitude higher than on oxygen-site-rich graphene oxide, and over 2 orders of magnitude higher than on the basal plane of graphite (as a surrogate for pristine graphene). Furthermore, dye-sensitized solar cells using defect-rich graphene monolayers perform similarly to those using platinum nanoparticles as the catalyst.