Nonclinical safety evaluation of a novel ionizable lipid for mRNA delivery.

mRNA vaccines hold tremendous potential in disease control and prevention for their flexibility with respect to production, application, and design. Recent breakthroughs in mRNA vaccination would have not been possible without major advances in lipid nanoparticles (LNPs) technologies. We developed an LNP containing a novel ionizable cationic lipid, Lipid-1, and three well known excipients. An in silico toxicity hazard assessment for genotoxicity, a genotoxicity assessment, and a dose range finding toxicity study were performed to characterize the safety profile of Lipid-1. The in silico toxicity hazard assessment, utilizing two prediction systems DEREK and Leadscope, did not find any structural alert for mutagenicity and clastogenicity, and prediction in the statistical models were all negative. In addition, applying a read-across approach a structurally very similar compound was tested negative in two in vitro assays confirming the low genotoxicity potential of Lipid-1. A dose range finding toxicity study in rabbits, receiving a single intramuscular injection of either different doses of an mRNA encoding Influenza Hemagglutinin H3 antigen encapsulated in the LNP containing Lipid-1 or the empty LNP, evaluated local tolerance and systemic toxicity during a 2-week observation period. Only rabbits exposed to the vaccine were able to develop a specific IgG response, indicating an appropriate vaccine take. The vaccine was well tolerated up to 250 µg mRNA/injection, which was defined as the No Observed Adverse Effect Level (NOAEL). These results support the use of the LNP containing Lipid-1 as an mRNA delivery system for different vaccine formulations and its deployment into clinical trials.

Predicting DNA-Reactivity of N-Nitrosamines: A Quantum Chemical Approach.

N-Nitrosamines (NAs) are a class of reactive organic chemicals that humans may be exposed to from environmental sources, food but also impurities in pharmaceutical preparations. Some NAs were identified as DNA-reactive mutagens and many of those have been classified as probable human carcinogens. Beyond high-potency mutagenic carcinogens that need to be strictly controlled, NAs of low potency need to be considered for risk assessment as well. NA impurities and nitrosylated products of active pharmaceutical ingredients (APIs) often arise from production processes or degradation. Most NAs require metabolic activation to ultimately become carcinogens, and their activation can be appropriately described by first-principles computational chemistry approaches. To this end, we treat NA-induced DNA alkylation as a series of subsequent association and dissociation reaction steps that can be calculated stringently by density functional theory (DFT), including α-hydroxylation, proton transfer, hydroxyl elimination, direct SN2/SNAr DNA alkylation, competing hydrolysis and SN1 reactions. Both toxification and detoxification reactions are considered. The activation reactions are modeled by DFT at a high level of theory with an appropriate solvent model to compute Gibbs free energies of the reactions (thermodynamical effects) and activation barriers (kinetic effects). We study congeneric series of aliphatic and cyclic NAs to identify trends. Overall, this work reveals detailed insight into mechanisms of activation for NAs, suggesting that individual steric and electronic factors have directing and rate-determining influence on the formation of carbenium ions as the ultimate pro-mutagens and thus carcinogens. Therefore, an individual risk assessment of NAs is suggested, as exemplified for the complex API-like 4-(N-nitroso-N-methyl)aminoantipyrine which is considered as low-potency NA by in silico prediction.

Extending (Q)SARs to incorporate proprietary knowledge for regulatory purposes: is aromatic N-oxide a structural alert for predicting DNA-reactive mutagenicity?

(Quantitative) structure-activity relationship or (Q)SAR predictions of DNA-reactive mutagenicity are important to support both the design of new chemicals and the assessment of impurities, degradants, metabolites, extractables and leachables, as well as existing chemicals. Aromatic N-oxides represent a class of compounds that are often considered alerting for mutagenicity yet the scientific rationale of this structural alert is not clear and has been questioned. Because aromatic N-oxide-containing compounds may be encountered as impurities, degradants and metabolites, it is important to accurately predict mutagenicity of this chemical class. This article analysed a series of publicly available aromatic N-oxide data in search of supporting information. The article also used a previously developed structure-activity relationship (SAR) fingerprint methodology where a series of aromatic N-oxide substructures was generated and matched against public and proprietary databases, including pharmaceutical data. An assessment of the number of mutagenic and non-mutagenic compounds matching each substructure across all sources was used to understand whether the general class or any specific subclasses appear to lead to mutagenicity. This analysis resulted in a downgrade of the general aromatic N-oxide alert. However, it was determined there were enough public and proprietary data to assign the quindioxin and related chemicals as well as benzo[c][1,2,5]oxadiazole 1-oxide subclasses as alerts. The overall results of this analysis were incorporated into Leadscope's expert-rule-based model to enhance its predictive accuracy.

Mechanistic investigations of the liver toxicity of the free fatty acid receptor 1 agonist fasiglifam (TAK875) and its primary metabolites.

For fasiglifam (TAK875) and its metabolites the substance-specific mechanisms of liver toxicity were studied. Metabolism studies were run to identify a putatively reactive acyl glucuronide metabolite. In vitro cytotoxicity and caspase 3/7 activation were assessed in primary human and dog hepatocytes in 2D and 3D cell culture. Involvement of glutathione (GSH) detoxication system in mediating cytotoxicity was determined by assessing potentiation of cytotoxicity in a GSH depleted in vitro system. In addition, potential mitochondrial liabilities of the compounds were assessed in a whole-cell mitochondrial functional assay. Fasiglifam showed moderate cytotoxicity in human primary hepatocytes in the classical 2D cytotoxicity assays and also in the complex 3D human liver microtissue (hLiMT) after short-term treatment (24 hours or 48 hours) with TC50 values of 56 to 68 µM (adenosine triphosphate endpoint). The long-term treatment for 14 days in the hLiMT resulted in a slight TC50 shift over time of 2.7/3.6 fold lower vs 24-hour treatment indicating possibly a higher risk for cytotoxicity during long-term treatment. Cellular GSH depletion and impairment of mitochondrial function by TAK875 and its metabolites evaluated by Seahorse assay could not be found being involved in DILI reported for TAK875. The acyl glucuronide metabolites of TAK875 have been finally identified to be the dominant reason for liver toxicity.

Genetic toxicology in silico protocol.

In silico toxicology (IST) approaches to rapidly assess chemical hazard, and usage of such methods is increasing in all applications but especially for regulatory submissions, such as for assessing chemicals under REACH as well as the ICH M7 guideline for drug impurities. There are a number of obstacles to performing an IST assessment, including uncertainty in how such an assessment and associated expert review should be performed or what is fit for purpose, as well as a lack of confidence that the results will be accepted by colleagues, collaborators and regulatory authorities. To address this, a project to develop a series of IST protocols for different hazard endpoints has been initiated and this paper describes the genetic toxicity in silico (GIST) protocol. The protocol outlines a hazard assessment framework including key effects/mechanisms and their relationships to endpoints such as gene mutation and clastogenicity. IST models and data are reviewed that support the assessment of these effects/mechanisms along with defined approaches for combining the information and evaluating the confidence in the assessment. This protocol has been developed through a consortium of toxicologists, computational scientists, and regulatory scientists across several industries to support the implementation and acceptance of in silico approaches.

Principles and procedures for handling out-of-domain and indeterminate results as part of ICH M7 recommended (Q)SAR analyses.

The International Council for Harmonization (ICH) M7 guideline describes a hazard assessment process for impurities that have the potential to be present in a drug substance or drug product. In the absence of adequate experimental bacterial mutagenicity data, (Q)SAR analysis may be used as a test to predict impurities' DNA reactive (mutagenic) potential. However, in certain situations, (Q)SAR software is unable to generate a positive or negative prediction either because of conflicting information or because the impurity is outside the applicability domain of the model. Such results present challenges in generating an overall mutagenicity prediction and highlight the importance of performing a thorough expert review. The following paper reviews pharmaceutical and regulatory experiences handling such situations. The paper also presents an analysis of proprietary data to help understand the likelihood of misclassifying a mutagenic impurity as non-mutagenic based on different combinations of (Q)SAR results. This information may be taken into consideration when supporting the (Q)SAR results with an expert review, especially when out-of-domain results are generated during a (Q)SAR evaluation.

In silico toxicology protocols.

The present publication surveys several applications of in silico (i.e., computational) toxicology approaches across different industries and institutions. It highlights the need to develop standardized protocols when conducting toxicity-related predictions. This contribution articulates the information needed for protocols to support in silico predictions for major toxicological endpoints of concern (e.g., genetic toxicity, carcinogenicity, acute toxicity, reproductive toxicity, developmental toxicity) across several industries and regulatory bodies. Such novel in silico toxicology (IST) protocols, when fully developed and implemented, will ensure in silico toxicological assessments are performed and evaluated in a consistent, reproducible, and well-documented manner across industries and regulatory bodies to support wider uptake and acceptance of the approaches. The development of IST protocols is an initiative developed through a collaboration among an international consortium to reflect the state-of-the-art in in silico toxicology for hazard identification and characterization. A general outline for describing the development of such protocols is included and it is based on in silico predictions and/or available experimental data for a defined series of relevant toxicological effects or mechanisms. The publication presents a novel approach for determining the reliability of in silico predictions alongside experimental data. In addition, we discuss how to determine the level of confidence in the assessment based on the relevance and reliability of the information.

Computational Models for Human and Animal Hepatotoxicity with a Global Application Scope.

Hepatic toxicity is a key concern for novel pharmaceutical drugs since it is difficult to anticipate in preclinical models, and it can originate from pharmacologically unrelated drug effects, such as pathway interference, metabolism, and drug accumulation. Because liver toxicity still ranks among the top reasons for drug attrition, the reliable prediction of adverse hepatic effects is a substantial challenge in drug discovery and development. To this end, more effort needs to be focused on the development of improved predictive in-vitro and in-silico approaches. Current computational models often lack applicability to novel pharmaceutical candidates, typically due to insufficient coverage of the chemical space of interest, which is either imposed by size or diversity of the training data. Hence, there is an urgent need for better computational models to allow for the identification of safe drug candidates and to support experimental design. In this context, a large data set comprising 3712 compounds with liver related toxicity findings in humans and animals was collected from various sources. The complex pathology was clustered into 21 preclinical and human hepatotoxicity endpoints, which were organized into three levels of detail. Support vector machine models were trained for each endpoint, using optimized descriptor sets from chemometrics software. The optimized global human hepatotoxicity model has high sensitivity (68%) and excellent specificity (95%) in an internal validation set of 221 compounds. Models for preclinical endpoints performed similarly. To allow for reliable prediction of "truly external" novel compounds, all predictions are tagged with confidence parameters. These parameters are derived from a statistical analysis of the predictive probability densities. The whole approach was validated for an external validation set of 269 proprietary compounds. The models are fully integrated into our early safety in-silico workflow.

It's difficult, but important, to make negative predictions.

At the confluence of predictive and regulatory toxicologies, negative predictions may be the thin green line that prevents populations from being exposed to harm. Here, two novel approaches to making confident and robust negative in silico predictions for mutagenicity (as defined by the Ames test) have been evaluated. Analyses of 12 data sets containing >13,000 compounds, showed that negative predictivity is high (∼90%) for the best approach and features that either reduce the accuracy or certainty of negative predictions are identified as misclassified or unclassified respectively. However, negative predictivity remains high (and in excess of the prevalence of non-mutagens) even in the presence of these features, indicating that they are not flags for mutagenicity.

Evaluation of a statistics-based Ames mutagenicity QSAR model and interpretation of the results obtained.

The relative wealth of bacterial mutagenicity data available in the public literature means that in silico quantitative/qualitative structure activity relationship (QSAR) systems can readily be built for this endpoint. A good means of evaluating the performance of such systems is to use private unpublished data sets, which generally represent a more distinct chemical space than publicly available test sets and, as a result, provide a greater challenge to the model. However, raw performance metrics should not be the only factor considered when judging this type of software since expert interpretation of the results obtained may allow for further improvements in predictivity. Enough information should be provided by a QSAR to allow the user to make general, scientifically-based arguments in order to assess and overrule predictions when necessary. With all this in mind, we sought to validate the performance of the statistics-based in vitro bacterial mutagenicity prediction system Sarah Nexus (version 1.1) against private test data sets supplied by nine different pharmaceutical companies. The results of these evaluations were then analysed in order to identify findings presented by the model which would be useful for the user to take into consideration when interpreting the results and making their final decision about the mutagenic potential of a given compound.

Extending (Q)SARs to incorporate proprietary knowledge for regulatory purposes: A case study using aromatic amine mutagenicity.

Statistical-based and expert rule-based models built using public domain mutagenicity knowledge and data are routinely used for computational (Q)SAR assessments of pharmaceutical impurities in line with the approach recommended in the ICH M7 guideline. Knowledge from proprietary corporate mutagenicity databases could be used to increase the predictive performance for selected chemical classes as well as expand the applicability domain of these (Q)SAR models. This paper outlines a mechanism for sharing knowledge without the release of proprietary data. Primary aromatic amine mutagenicity was selected as a case study because this chemical class is often encountered in pharmaceutical impurity analysis and mutagenicity of aromatic amines is currently difficult to predict. As part of this analysis, a series of aromatic amine substructures were defined and the number of mutagenic and non-mutagenic examples for each chemical substructure calculated across a series of public and proprietary mutagenicity databases. This information was pooled across all sources to identify structural classes that activate or deactivate aromatic amine mutagenicity. This structure activity knowledge, in combination with newly released primary aromatic amine data, was incorporated into Leadscope's expert rule-based and statistical-based (Q)SAR models where increased predictive performance was demonstrated.

Principles and procedures for implementation of ICH M7 recommended (Q)SAR analyses.

The ICH M7 guideline describes a consistent approach to identify, categorize, and control DNA reactive, mutagenic, impurities in pharmaceutical products to limit the potential carcinogenic risk related to such impurities. This paper outlines a series of principles and procedures to consider when generating (Q)SAR assessments aligned with the ICH M7 guideline to be included in a regulatory submission. In the absence of adequate experimental data, the results from two complementary (Q)SAR methodologies may be combined to support an initial hazard classification. This may be followed by an assessment of additional information that serves as the basis for an expert review to support or refute the predictions. This paper elucidates scenarios where additional expert knowledge may be beneficial, what such an expert review may contain, and how the results and accompanying considerations may be documented. Furthermore, the use of these principles and procedures to yield a consistent and robust (Q)SAR-based argument to support impurity qualification for regulatory purposes is described in this manuscript.

Establishing best practise in the application of expert review of mutagenicity under ICH M7.

The ICH M7 guidelines for the assessment and control of DNA reactive (mutagenic) impurities in pharmaceuticals allows for the consideration of in silico predictions in place of in vitro studies. This represents a significant advance in the acceptance of (Q)SAR models and has resulted from positive interactions between modellers, regulatory agencies and industry with a shared purpose of developing effective processes to minimise risk. This paper discusses key scientific principles that should be applied when evaluating in silico predictions with a focus on accuracy and scientific rigour that will support a consistent and practical route to regulatory submission.

Toward implementing virtual control groups in nonclinical safety studies.

Historical data from control groups in animal toxicity studies is currently mainly used for comparative purposes to assess validity and robustness of study results. Due to the highly controlled environment in which the studies are performed and the homogeneity of the animal collectives it has been proposed to use the historical data for building so-called virtual control groups, which could replace partly or entirely the concurrent control. This would constitute a substantial contribution to the reduction of animal use in safety studies. Before the concept can be implemented, the prerequisites regarding data collection, curation and statistical evaluation together with a validation strategy need to be identified to avoid any impairment of the study outcome and subsequent consequences for human risk assessment. To further assess and develop the concept of virtual control groups the transatlantic think tank for toxicology (t4) sponsored a workshop with stakeholders from the pharmaceutical and chemical industry, academia, FDA, pharmaceutical, contract research organizations (CROs), and non-governmental organizations in Washington, which took place in March 2023. This report summarizes the current efforts of a European initiative to share, collect and curate animal control data in a centralized database and the first approaches to identify optimal matching criteria between virtual controls and the treatment arms of a study as well as first reflections about strategies for a qualification procedure and potential pitfalls of the concept.

Animal safety studies are usually performed with three groups of animals where increasing amounts of the test chemical are given to the animals and one control group where the animals do not receive the test chemical. The design of such studies, the characteristics of the animals, and the measured parameters are often very similar from study to study. Therefore, it has been suggested that measurement data from the control groups could be reused from study to study to lower the total number of animals per study. This could reduce animal use by up to 25% for such standardized studies. A workshop was held to discuss the pros and cons of such a concept and what would have to be done to implement it without threatening the reliability of the study outcome or the resulting human risk assessment.

Use of in silico systems and expert knowledge for structure-based assessment of potentially mutagenic impurities.

Genotoxicity hazard identification is part of the impurity qualification process for drug substances and products, the first step of which being the prediction of their potential DNA reactivity using in silico (quantitative) structure-activity relationship (Q)SAR models/systems. This white paper provides information relevant to the development of the draft harmonized tripartite guideline ICH M7 on potentially DNA-reactive/mutagenic impurities in pharmaceuticals and their application in practice. It explains relevant (Q)SAR methodologies as well as the added value of expert knowledge. Moreover, the predictive value of the different methodologies analyzed in two surveys conveyed in the US and European pharmaceutical industry is compared: most pharmaceutical companies used a rule-based expert system as their primary methodology, yielding negative predictivity values of ⩾78% in all participating companies. A further increase (>90%) was often achieved by an additional expert review and/or a second QSAR methodology. Also in the latter case, an expert review was mandatory, especially when conflicting results were obtained. Based on the available data, we concluded that a rule-based expert system complemented by either expert knowledge or a second (Q)SAR model is appropriate. A maximal transparency of the assessment process (e.g. methods, results, arguments of weight-of-evidence approach) achieved by e.g. data sharing initiatives and the use of standards for reporting will enable regulators to fully understand the results of the analysis. Overall, the procedures presented here for structure-based assessment are considered appropriate for regulatory submissions in the scope of ICH M7.

In silico approaches in carcinogenicity hazard assessment: case study of pregabalin, a nongenotoxic mouse carcinogen.

In silico toxicology protocols are meant to support computationally-based assessments using principles that ensure that results can be generated, recorded, communicated, archived, and then evaluated in a uniform, consistent, and reproducible manner. We investigated the availability of in silico models to predict the carcinogenic potential of pregabalin using the ten key characteristics of carcinogens as a framework for organizing mechanistic studies. Pregabalin is a single-species carcinogen producing only one type of tumor, hemangiosarcomas in mice via a nongenotoxic mechanism. The overall goal of this exercise is to test the ability of in silico models to predict nongenotoxic carcinogenicity with pregabalin as a case study. The established mode of action (MOA) of pregabalin is triggered by tissue hypoxia, leading to oxidative stress (KC5), chronic inflammation (KC6), and increased cell proliferation (KC10) of endothelial cells. Of these KCs, in silico models are available only for selected endpoints in KC5, limiting the usefulness of computational tools in prediction of pregabalin carcinogenicity. KC1 (electrophilicity), KC2 (genotoxicity), and KC8 (receptor-mediated effects), for which predictive in silico models exist, do not play a role in this mode of action. Confidence in the overall assessments is considered to be medium to high for KCs 1, 2, 5, 6, 7 (immune system effects), 8, and 10 (cell proliferation), largely due to the high-quality experimental data. In order to move away from dependence on animal data, development of reliable in silico models for prediction of oxidative stress, chronic inflammation, immunosuppression, and cell proliferation will be critical for the ability to predict nongenotoxic compound carcinogenicity.

Intra- and interlaboratory reproducibility of ultra performance liquid chromatography-time-of-flight mass spectrometry for urinary metabolic profiling.

Liquid chromatography coupled to mass spectrometry (LC-MS) is a major platform in metabolic profiling but has not yet been comprehensively assessed as to its repeatability and reproducibility across multiple spectrometers and laboratories. Here we report results of a large interlaboratory reproducibility study of ultra performance (UP) LC-MS of human urine. A total of 14 stable isotope labeled standard compounds were spiked into a pooled human urine sample, which was subject to a 2- to 16-fold dilution series and run by UPLC coupled to time-of-flight MS at three different laboratories all using the same platform. In each lab, identical samples were run in two phases, separated by at least 1 week, to assess between-day reproducibility. Overall, platform reproducibility was good with median mass accuracies below 12 ppm, median retention time drifts of less than 0.73 s and coefficients of variation of intensity of less than 18% across laboratories and ionization modes. We found that the intensity response was highly linear within each run, with a median R(2) of 0.95 and 0.93 in positive and negative ionization modes. Between-day reproducibility was also high with a mean R(2) of 0.93 for a linear relationship between the intensities of ions recorded in the two phases across the laboratories and modes. Most importantly, between-lab reproducibility was excellent with median R(2) values of 0.96 and 0.98 for positive and negative ionization modes, respectively, across all pairs of laboratories. Interestingly, the three laboratories observed different amounts of adduct formation, but this did not appear to be related to reproducibility observed in each laboratory. These studies show that UPLC-MS is fit for the purpose of targeted urinary metabolite analysis but that care must be taken to optimize laboratory systems for quantitative detection due to variable adduct formation over many compound classes.

Principles and Procedures for Assessment of Acute Toxicity Incorporating In Silico Methods.

Acute toxicity in silico models are being used to support an increasing number of application areas including (1) product research and development, (2) product approval and registration as well as (3) the transport, storage and handling of chemicals. The adoption of such models is being hindered, in part, because of a lack of guidance describing how to perform and document an in silico analysis. To address this issue, a framework for an acute toxicity hazard assessment is proposed. This framework combines results from different sources including in silico methods and in vitro or in vivo experiments. In silico methods that can assist the prediction of in vivo outcomes (i.e., LD50) are analyzed concluding that predictions obtained using in silico approaches are now well-suited for reliably supporting assessment of LD50-based acute toxicity for the purpose of GHS classification. A general overview is provided of the endpoints from in vitro studies commonly evaluated for predicting acute toxicity (e.g., cytotoxicity/cytolethality as well as assays targeting specific mechanisms). The increased understanding of pathways and key triggering mechanisms underlying toxicity and the increased availability of in vitro data allow for a shift away from assessments solely based on endpoints such as LD50, to mechanism-based endpoints that can be accurately assessed in vitro or by using in silico prediction models. This paper also highlights the importance of an expert review of all available information using weight-of-evidence considerations and illustrates, using a series of diverse practical use cases, how in silico approaches support the assessment of acute toxicity.

EU framework 6 project: predictive toxicology (PredTox)--overview and outcome.

In this publication, we report the outcome of the integrated EU Framework 6 PROJECT: Predictive Toxicology (PredTox), including methodological aspects and overall conclusions. Specific details including data analysis and interpretation are reported in separate articles in this issue. The project, partly funded by the EU, was carried out by a consortium of 15 pharmaceutical companies, 2 SMEs, and 3 universities. The effects of 16 test compounds were characterized using conventional toxicological parameters and "omics" technologies. The three major observed toxicities, liver hypertrophy, bile duct necrosis and/or cholestasis, and kidney proximal tubular damage were analyzed in detail. The combined approach of "omics" and conventional toxicology proved a useful tool for mechanistic investigations and the identification of putative biomarkers. In our hands and in combination with histopathological assessment, target organ transcriptomics was the most prolific approach for the generation of mechanistic hypotheses. Proteomics approaches were relatively time-consuming and required careful standardization. NMR-based metabolomics detected metabolite changes accompanying histopathological findings, providing limited additional mechanistic information. Conversely, targeted metabolite profiling with LC/GC-MS was very useful for the investigation of bile duct necrosis/cholestasis. In general, both proteomics and metabolomics were supportive of other findings. Thus, the outcome of this program indicates that "omics" technologies can help toxicologists to make better informed decisions during exploratory toxicological studies. The data support that hypothesis on mode of action and discovery of putative biomarkers are tangible outcomes of integrated "omics" analysis. Qualification of biomarkers remains challenging, in particular in terms of identification, mechanistic anchoring, appropriate specificity, and sensitivity.

A comparative integrated transcript analysis and functional characterization of differential mechanisms for induction of liver hypertrophy in the rat.

The main goal of the present work was to better understand the molecular mechanisms underlying liver hypertrophy (LH), a recurrent finding observed following acute or repeated drug administration to animals, using transcriptomic technologies together with the results from conventional toxicology methods. Administration of 5 terminated proprietary drug candidates from participating companies involved in the EU Innomed PredTox Project or the reference hepatotoxicant troglitazone to rats for up to a 14-day duration induced LH as the main liver phenotypic toxicity outcome. The integrated analysis of transcriptomic liver expression data across studies turned out to be the most informative approach for the generation of mechanistic models of LH. In response to a xenobiotic stimulus, a marked increase in the expression of xenobiotic metabolizing enzymes (XME) was observed in a subset of 4 studies. Accumulation of these newly-synthesized proteins within the smooth endoplasmic reticulum (SER) would suggest proliferation of this organelle, which most likely is the main molecular process underlying the LH observed in XME studies. In another subset of 2 studies (including troglitazone), a marked up-regulation of genes involved in peroxisomal fatty acid ß-oxidation was noted, associated with induction of genes involved in peroxisome proliferation. Therefore, an increase in peroxisome abundance would be the main mechanism underlying LH noted in this second study subset. Together, the use of transcript profiling provides a means to generate putative mechanistic models underlying the pathogenesis of liver hypertrophy, to distinguish between subtle variations in subcellular organelle proliferation and creates opportunities for improved mechanism-based risk assessment.