RESUMO
The significant increase of periodontitis, chronic kidney disease (CKD), Alzheimer's disease and cancer can be attributed to an ageing population. Each disease produces a range of biomarkers that can be indicative of disease onset and progression. Biomarkers are defined as cellular (intra/extracellular components and whole cells), biochemical (metabolites, ions and toxins) or molecular (nucleic acids, proteins and lipids) alterations which are measurable in biological media such as human tissues, cells or fluids. An interesting group of biomarkers that merit further investigation are the polyamines. Polyamines are a group of molecules consisting of cadaverine, putrescine, spermine and spermidine and have been implicated in the development of a range of systemic diseases, in part due to their production in periodontitis. Cadaverine and putrescine within the periodontal environment have demonstrated cell signalling interfering abilities, by way of leukocyte migration disruption. The polyamines spermine and spermidine in tumour cells have been shown to inhibit cellular apoptosis, effectively prolonging tumorigenesis and continuation of cancer within the host. Polyamine degradation products such as acrolein have been shown to exacerbate renal damage in CKD patients. Thus, the use of such molecules has merit to be utilized in the early indication of such diseases in patients.
Assuntos
Doença de Alzheimer/diagnóstico , Cadaverina/sangue , Neoplasias/diagnóstico , Periodontite/diagnóstico , Putrescina/sangue , Insuficiência Renal Crônica/diagnóstico , Espermidina/sangue , Espermina/sangue , Acroleína/sangue , Acroleína/farmacologia , Doença de Alzheimer/sangue , Apoptose/efeitos dos fármacos , Biomarcadores/sangue , Biotransformação , Cadaverina/farmacologia , Movimento Celular/efeitos dos fármacos , Humanos , Leucócitos/citologia , Leucócitos/efeitos dos fármacos , Neoplasias/sangue , Periodontite/metabolismo , Putrescina/farmacologia , Insuficiência Renal Crônica/sangue , Espermidina/farmacologia , Espermina/farmacologiaRESUMO
The binding of conidia to surfaces is a prerequisite for biofouling by fungal species. In this study, Aspergillus niger subtypes 1957 and 1988 were used which produced differently shaped conidia (round or spikey respectively). Test surfaces were characterised for their surface topography, wettability, and hardness. Conidial assays included perpendicular and lateral force measurements, as well as attachment, adhesion and retention assays. Anionic surfaces were less rough (Ra 2.4 nm), less wettable (54°) and harder (0.72 GPa) than cationic surfaces (Ra 5.4 nm, 36° and 0.5 GPa, respectively). Perpendicular and lateral force assays demonstrated that both types of conidia adhered with more force to the anionic surfaces and were influenced by surface wettability. Following the binding assays, fewer A. niger 1957 and A. niger 1988 conidia bound to the anionic surface. However, surface wettability affected the density and dispersion of the conidia on the coatings, whilst clustering was affected by their spore shapes. This work demonstrated that anionic surfaces were more repulsive to A. niger 1998 spores than cationic surfaces were, but once attached, the conidia bound more firmly to the anionic surfaces. This work informs on the importance of understanding how conidia become tightly bound to surfaces, which can be used to prevent biofouling.
RESUMO
Cadaverine is a biomolecule of major healthcare importance in periodontal disease; however, current detection methods remain inefficient. The development of an enzyme biosensor for the detection of cadaverine may provide a cheap, rapid, point-of-care alternative to traditional measurement techniques. This work developed a screen-printed biosensor (SPE) with a diamine oxidase (DAO) and multi-walled carbon nanotube (MWCNT) functionalised electrode which enabled the detection of cadaverine via cyclic voltammetry and differential pulse voltammetry. The MWCNTs were functionalised with DAO using carbodiimide crosslinking with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) and N-Hydroxysuccinimide (NHS), followed by direct covalent conjugation of the enzyme to amide bonds. Cyclic voltammetry results demonstrated a pair of distinct redox peaks for cadaverine with the C-MWCNT/DAO/EDC-NHS/GA SPE and no redox peaks using unmodified SPEs. Differential pulse voltammetry (DPV) was used to isolate the cadaverine oxidation peak and a linear concentration dependence was identified in the range of 3-150 µg/mL. The limit of detection of cadaverine using the C-MWCNT/DAO/EDC-NHS/GA SPE was 0.8 µg/mL, and the biosensor was also found to be effective when tested in artificial saliva which was used as a proof-of-concept model to increase the Technology Readiness Level (TRL) of this device. Thus, the development of a MWCNT based enzymatic biosensor for the voltammetric detection of cadaverine which was also active in the presence of artificial saliva was presented in this study.
RESUMO
Binding of particles and spores to surfaces is a natural phenomenon which is a prerequisite for biofilm formation. Perpendicular force measurements were carried out using atomic force microscopy cantilevers modified with a polystyrene or glass sphere. The attachment of the spheres was tested against glass, PVAc, p(γ-MPSco-MMA), p(γ-MPS-co-LMA), PMMAsc, and silicon surfaces. The polystyrene spheres demonstrated less varied force and strength of attachment measurement to the surfaces than the glass spheres. The force of attachment of the polystyrene spheres was also influenced by mobility of the co-polymer surfaces. Surface wettability did not affect the force of polystyrene or glass sphere attachment. The force measurements of the non-biological spheres were similar to those seen in biological systems with fungal conidia, and this was due to their size, shape, and binding energies. The use of non-biological systems may present an insight into understanding the fundamentals of more complex biological processes.
RESUMO
Binding to surfaces by fungal spores is a prerequisite to biofilm formation. The interactions of polytetrafluoroethylene (PTFE), glass, and silicon with three fungal spores, of differing shapes and sizes (Aspergillus niger 1957, Aspergillus niger 1988, and Aureobasidium pullulans), were investigated. A multifractal analysis was conducted to provide quantitative measures of density, dispersion, and clustering of spores on the surfaces. The PTFE, glass, and silicon surfaces presented a range of surface topographies and wettabilities. PTFE was the roughest and most non-wettable surface, whereas silicon was the opposite in terms of both these aspects. The A. niger species were more non-wettable than A. pullulans. Overall, A. niger 1957 attached in higher numbers to PTFE, whereas A. niger 1988 and A. pullulans bound in highest numbers to glass. The results of this work demonstrated that the overall substratum surface roughness influenced spore binding rather than the physicochemical or chemical properties of surfaces or spores.
RESUMO
The reduction of bacteria and biofilm formation is important when designing surfaces for use in industry. Molybdenum disulfide surfaces (MoS2SUR) were produced using MoS2 particle (MoS2PAR) sizes of 90 nm, 2 µm, and 6 µm containing MoS2PAR concentrations of 5%, 10%, 15%, and 20%. These were tested to determine the efficacy of the MoS2SUR to impede bacterial retention and biofilm formation of two different types of bacteria, Staphylococcus aureus and Pseudomonas aeruginosa. The MoS2SUR were characterized using Fourier transform infrared spectroscopy, ion-coupled plasma atomic emission spectroscopy, scanning electron microscopy, optical profilometry, and water contact angles. The MoS2SUR made with the smaller 90 nm MoS2PAR sizes demonstrated smaller topographical-shaped features. As the size of the incorporated MoS2PAR increased, the MoS2SUR demonstrated wider surface features, and they were less wettable. The increase in MoS2PAR concentration within the MoS2SUR groups did not affect the surface topography but did increase wettability. However, the increase in MoS2PAR size increased both the surface topography and wettability. The MoS2SUR with the smaller topographical-shaped features influenced the retention of the S. aureus bacteria. Increased MoS2SUR topography and wettability resulted in the greatest reduction in bacterial retention, and the bacteria became more heterogeneously dispersed and less clustered across the surfaces. The surfaces that exhibited decreased bacterial retention (largest particle sizes, largest features, greatest roughness, and most wettable) resulted in decreased biofilm formation. Cytotoxicity testing of the surface using cell viability demonstrated that the MoS2SUR were not toxic against HK-2 cells at MoS2PAR sizes of 90 nm and 2 µm. This work demonstrated that individual surface variables (MoS2SUR topographic shape and roughness, MoS2PAR size, and concentration) decreased bacterial loading on the surfaces, which then decreased biofilm formation. By optimizing MoS2SUR properties, it was possible to impede bacterial retention and subsequent biofilm formation.