Haemolymph viscosity in hawkmoths and its implications for hovering flight.

Viscosity determines the resistance of haemolymph flow through the insect body. For flying insects, viscosity is a major physiological parameter limiting flight performance by controlling the flow rate of fuel to the flight muscles, circulating nutrients and rapidly removing metabolic waste products. The more viscous the haemolymph, the greater the metabolic energy needed to pump it through confined spaces. By employing magnetic rotational spectroscopy with nickel nanorods, we showed that viscosity of haemolymph in resting hawkmoths (Sphingidae) depends on wing size non-monotonically. Viscosity increases for small hawkmoths with high wingbeat frequencies, reaches a maximum for middle-sized hawkmoths with moderate wingbeat frequencies, and decreases in large hawkmoths with slower wingbeat frequencies but greater lift. Accordingly, hawkmoths with small and large wings have viscosities approaching that of water, whereas hawkmoths with mid-sized wings have more than twofold greater viscosity. The metabolic demands of flight correlate with significant changes in circulatory strategies via modulation of haemolymph viscosity. Thus, the evolution of hovering flight would require fine-tuned viscosity adjustments to balance the need for the haemolymph to carry more fuel to the flight muscles while decreasing the viscous dissipation associated with its circulation.

Elastocapillary effect in self-repair of proboscises of butterflies and moths.

HYPOTHESIS: Self-repair in living organisms, without tissue regeneration or regrowth, is rare. Recent discovery that butterflies can self-repair the proboscis after the two halves (galeae) have been separated raised a question about the physical mechanism allowing them to reunite the parts. We discovered that butterflies pump saliva during repair of their proboscises. We then hypothesized that saliva spreading along the food canal of the proboscis would create capillary forces capable of bringing the galeae together. EXPERIMENT: To test the hypothesis, we distinguished capillary forces from muscular action of the galeae by sedating butterflies and video tracking retraction of the saliva menisci during galeal separation. To theoretically show capillary adhesion, the elastic moduli of the galeae were measured, and the galeal profiles were extracted from videos as a function of time. The values were then fitted with a mathematical model based on an augmented Euler-Bernoulli beam theory whereby each galea was treated as a beam bent by capillary forces due to saliva. We also evaluated friction forces that prevented disjoining of the galea at the tip of their separation. FINDINGS: The results showed that butterflies use saliva to repair their proboscises via capillary adhesion, and theoretically supported the role of saliva in providing the necessary capillary forces to bring the galeae together. Tangential shear forces acting parallel to the galea at the tip of their separation are caused primarily by friction between the cuticular linking structures.

Rotating magnetic nanorods detect minute fluctuations of magnetic field.

Magnetic nanorods rotating in a viscous liquid are very sensitive to any ambient magnetic field. We theoretically predicted and experimentally validated the conditions for two-dimensional synchronous and asynchronous rotation as well as three-dimensional precession and tumbling of nanorods in an ambient field superimposed on a planar rotating magnetic field. We discovered that any ambient field stabilizes the synchronous precession of the nanorod so that the nanorod precession can be completely controlled. This effect opens up different applications of magnetic nanorods as sensors of weak magnetic fields, for microrheology, and generally for magnetic levitation.

Nucleation and Formation of a Primary Clot in Insect Blood.

Blood clotting at wound sites is critical for preventing blood loss and invasion by microorganisms in multicellular animals, especially small insects vulnerable to dehydration. The mechanistic reaction of the clot is the first step in providing scaffolding for the formation of new epithelial and cuticular tissue. The clot, therefore, requires special materials properties. We have developed and used nano-rheological magnetic rotational spectroscopy with nanorods to quantitatively study nucleation of cell aggregates that occurs within fractions of a second. Using larvae of Manduca sexta, we discovered that clot nucleation is a two-step process whereby cell aggregation is the time-limiting step followed by rigidification of the aggregate. Clot nucleation and transformation of viscous blood into a visco-elastic aggregate happens in a few minutes, which is hundreds of times faster than wound plugging and scab formation. This discovery sets a time scale for insect clotting phenomena, establishing a materials metric for the kinetics of biochemical reaction cascades. Combined with biochemical and biomolecular studies, these discoveries can help design fast-working thickeners for vertebrate blood, including human blood, based on clotting principles of insect blood.

Microphysiological Engineering of Self-Assembled and Perfusable Microvascular Beds for the Production of Vascularized Three-Dimensional Human Microtissues.

The vasculature is an essential component of the circulatory system that plays a vital role in the development, homeostasis, and disease of various organs in the human body. The ability to emulate the architecture and transport function of blood vessels in the integrated context of their associated organs represents an important requirement for studying a wide range of physiological processes. Traditional in vitro models of the vasculature, however, largely fail to offer such capabilities. Here we combine microfluidic three-dimensional (3D) cell culture with the principle of vasculogenic self-assembly to engineer perfusable 3D microvascular beds in vitro. Our system is created in a micropatterned hydrogel construct housed in an elastomeric microdevice that enables coculture of primary human vascular endothelial cells and fibroblasts to achieve de novo formation, anastomosis, and controlled perfusion of 3D vascular networks. An open-top chamber design adopted in this hybrid platform also makes it possible to integrate the microengineered 3D vasculature with other cell types to recapitulate organ-specific cellular heterogeneity and structural organization of vascularized human tissues. Using these capabilities, we developed stem cell-derived microphysiological models of vascularized human adipose tissue and the blood-retinal barrier. Our approach was also leveraged to construct a 3D organotypic model of vascularized human lung adenocarcinoma as a high-content drug screening platform to simulate intravascular delivery, tumor-killing effects, and vascular toxicity of a clinical chemotherapeutic agent. Furthermore, we demonstrated the potential of our platform for applications in nanomedicine by creating microengineered models of vascular inflammation to evaluate a nanoengineered drug delivery system based on active targeting liposomal nanocarriers. These results represent a significant improvement in our ability to model the complexity of native human tissues and may provide a basis for developing predictive preclinical models for biopharmaceutical applications.

Magnetic Submicron Mullite Coatings with Oriented SiC Whiskers.

Addressing the challenge of making ceramic thin films with the in-plane-oriented nanorods, we propose to decorate the nanorods with magnetic nanoparticles and orient them using the external magnetic field. As an illustration, the mullite thin films with embedded and oriented SiC nanorods were synthesized. The SiC nanorods were decorated with the Fe3O4 nanoparticles. A two-step processing route was developed when the nanorods are first oriented in a sacrificial polymer layer. Then, the polymer film with the aligned nanorods was removed by heat-treatment. In the second step, a sol-gel/dip-coating method was applied to produce the mullite composite film. The main challenge was to guarantee that all of the nanorods that were initially randomly distributed in the polymer would have time to rotate toward the field direction before complete solidification of the sacrificial layer. Theoretical and experimental analyses of the orientational distribution of the nanorod axes were conducted to identify a relationship between the polymer viscosity and processing parameters of the system. In contrast to the ferromagnetic nanorods, the rate of rotation of paramagnetic nanorods and their time of alignment are more sensitive to the magnetic field. This methodology allows manufacturing of different ceramic films with aligned nanorods and making nonmagnetic ceramic coating magnetic.

Enhancing Mechanical and Thermal Properties of Epoxy Nanocomposites via Alignment of Magnetized SiC Whiskers.

This research is focused on the fabrication and properties of epoxy nanocomposites containing magnetized SiC whiskers (MSiCWs). To this end, we report an original strategy for fabrication of magnetically active SiCWs by decorating the whiskers with magnetic (iron oxide) nanoparticles via polymer-polymer (poly(acrylic acid)/poly(2-vinyl pyridine)) complexation. The obtained whiskers demonstrated a substantial magnetic response in the polymerizing epoxy resin, with application of only a 20 mT (200 G) magnetic field. We also found that the whiskers chemically reacted with the epoxy resin, causing formation of an extended interphase near the boundary of the whiskers. The SiC whiskers oriented with the magnetic field demonstrated positive effects on the behavior of epoxy-based nanocomposites. Namely, the aligned MSiCWs enhanced the thermomechanical properties of the materials significantly above that of the neat epoxy and epoxy nanocomposite, with randomly oriented whiskers.