Effects of bisphosphonates on osteogenesis and osteoclastogenesis signaling during the endochondral ossification of growing rats.

Osteoclasts and chondroclasts are necessary, during endochondral ossification, for the resorption of primary bone and calcified cartilage septa, respectively. The bisphosphonates inhibit mineralized tissue resorption by various mechanisms according to the different types of this drug, which can affect bone remodeling during skeletal growth. The objective of the present study is to analyze the way that alendronate (ALN) and etidronate (ETN) can affect osteoclastogenesis and bone formation during endochondral ossification of the long bones of growing rats. Newborn Wistar rats were treated daily with ETN, ALN, or sterile saline solution (control) for 21 days. Their femur and tibiae epiphyses were radiographed and analyzed by light, scanning and transmission electron microscopy. The expression of genes related to osteogenesis and to osteoclast differentiation and activity were analyzed by real-time quantitative polymerase chain reaction. The ETN group presented reduced body weight, disorganized growth plate and an extended area of cartilage in the ossification zone with little bone matrix; in the ALN group, this area was not altered. The ALN presented latent TRAP-positive cells, whereas in the ETN group, they were activated. The expression of NFκB1 and 2, OPG, Spp1 and Runx2 in the ossification zone was reduced by both bisphosphonates. RANKL expression was reduced by ETN, whereas ALN decreased the expression of RANK. The results also indicated that, in addition to the anti-resorptive effect of the drugs, disturbances in bone deposition occurred concomitantly with the reduced expression of osteogenesis-related genes.

Reduced RANKL expression impedes osteoclast activation and tooth eruption in alendronate-treated rats.

The creation of the eruption pathway requires the resorption of the occlusal alveolar bone by osteoclasts and signaling events between bone and dental follicle are necessary. The aim of the present study has been to evaluate the effect of alendronate on osteoclastogenesis and the expression of the regulator proteins of osteoclast activation, namely RANK, RANKL and OPG, in the bone that covers the first molar germ. Newborn Wistar rats were treated daily with 2.5 mg/kg alendronate for 4, 8, 14, 21 and 28 days, whereas controls received sterile saline solution. At the time points cited, maxillae were fixed, decalcified and processed for light and electron microscopic analysis. TRAP histochemistry was performed on semi-serial sections and the osteoclasts in the occlusal half of the bony crypt surface were counted. TUNEL analysis was carried out on paraffin sections. The occlusal bone that covers the upper first molar was removed in additional 4- and 8-day-old alendronate-treated and control rats in which the expression of RANK, RANKL and OPG was analyzed by SDS-polyacrylamide gel electrophoresis and Western blotting. TRAP-positive osteoclasts were more numerous in the alendronate group at all time points, despite their unactivated phenotype and the presence of apoptotic cells. RANKL expression in the alendronate specimens was inhibited at all time points, unlike in controls. Our findings indicate that the expression of RANKL in the occlusal portion of the bony crypt is unrelated to osteoclast recruitment and differentiation but is crucial to their activation during the creation of the eruption pathway.

Tubule density and diameter in coronal dentin from primary and permanent human teeth.

This study compared dentinal tubule density and diameter of human primary and permanent teeth at different depths of the coronal dentin. Crowns of eight primary second molars and eight permanent third molars were serially sectioned into three disks of ~0.5 mm thickness (superficial, middle, and deep layers), perpendicular to the long axis. Tubule density and diameter were evaluated in 2,000× and 3,000× magnifications by scanning electron microscopy. Data obtained were subjected to two-way repeated measures ANOVA and Tukey's post hoc test (α = 0.05). Tubule density was greater in primary teeth compared with permanent ones, regardless of depth (primary: 124,329 ± 43,594 mm2; permanent: 45,972 ± 21,098 mm2). In general, the tubule density increased as the dentin depth increased, except to the superficial and middle layers from permanent teeth. Tubule diameter was larger in the dentin layer close to the pulp chamber (superficial: 2.4 ± 0.07 µm; middle: 3.70 ± 0.06 µm; deep: 4.28 ± 0.04 µm). No difference was observed between primary (3.48 ± 0.81 µm) and permanent teeth (3.47 ± 0.73 µm). The tubule diameter increases as the dentin depth increases for primary and permanent teeth; however, the tubule density is higher in primary teeth.

Red, infrared, and simultaneous laser-wavelengths irradiation effects on 5-fluorouracil-induced oral mucositis in hamsters.

The association of more than one wavelength for photobiomodulation therapy (PBMT) to treat oral mucositis (OM) is unusual in the literature. Thus, this study aims to compare the simultaneous irradiation effects with their isolated application to treat OM. In order of that, 48 male Syrian hamsters were divided into 4 groups: Chemotherapy (Ch), which received only a OM induction protocol (5-fluorouracil chemotherapy and superficial oral mucosa scratches); red laser (RL), which received the OM induction and a PBMT protocol at 660 nm; infrared laser (IRL), which received the OM induction, and a PBMT protocol at 808 nm; and the RL + IRL group, which received the simultaneous application, of 660 and 808 nm wavelengths. Clinical (OM grade classification), histological (light microscopy analysis with H&E and collagen staining), immunohistochemical (TNF-α expression), and biochemical (TNF-α and hydroxyproline concentration) analyzes were performed after 7 and 10 days. Mainly on the 10th day, the RL and IRL groups showed lower OM grades and faster microscopic repair process, with greater expression of collagen fibers and lower TNF-α levels, besides the higher hydroxyproline concentrations, mainly in comparison with the Ch group. In conclusion, in this study, the simultaneous protocol did not present superior results than the isolated irradiations.

New Insights into the Bacterial Targets of Antimicrobial Blue Light.

Antimicrobial blue light (aBL) offers efficacy and safety in treating infections. However, the bacterial targets for aBL are still poorly understood and may be dependent on bacterial species. Here, we investigated the biological targets of bacterial killing by aBL (λ = 410 nm) on three pathogens: Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. Initially, we evaluated the killing kinetics of bacteria exposed to aBL and used this information to calculate the lethal doses (LD) responsible for killing 90 and 99.9% of bacteria. We also quantified endogenous porphyrins and assessed their spatial distribution. We then quantified and suppressed reactive oxygen species (ROS) production in bacteria to investigate their role in bacterial killing by aBL. We also assessed aBL-induced DNA damage, protein carbonylation, lipid peroxidation, and membrane permeability in bacteria. Our data showed that P. aeruginosa was more susceptible to aBL (LD99.9 = 54.7 J/cm2) relative to S. aureus (LD99.9 = 158.9 J/cm2) and E. coli (LD99.9 = 195 J/cm2). P. aeruginosa exhibited the highest concentration of endogenous porphyrins and level of ROS production relative to the other species. However, unlike other species, DNA degradation was not observed in P. aeruginosa. Sublethal doses of blue light (LD99.9). We conclude that the primary targets of aBL depend on the species, which are probably driven by variable antioxidant and DNA-repair mechanisms. IMPORTANCE Antimicrobial-drug development is facing increased scrutiny following the worldwide antibiotic crisis. Scientists across the world have recognized the urgent need for new antimicrobial therapies. In this sense, antimicrobial blue light (aBL) is a promising option due to its antimicrobial properties. Although aBL can damage different cell structures, the targets responsible for bacterial inactivation have still not been completely established and require further exploration. In our study, we conducted a thorough investigation to identify the possible aBL targets and gain insights into the bactericidal effects of aBL on three relevant pathogens: Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. This research not only adds new content to blue light studies but opens new perspectives to antimicrobial applications.

The Biochemical Mechanisms of Antimicrobial Photodynamic Therapy†.

The unbridled dissemination of multidrug-resistant pathogens is a major threat to global health and urgently demands novel therapeutic alternatives. Antimicrobial photodynamic therapy (aPDT) has been developed as a promising approach to treat localized infections regardless of drug resistance profile or taxonomy. Even though this technique has been known for more than a century, discussions and speculations regarding the biochemical mechanisms of microbial inactivation have never reached a consensus on what is the primary cause of cell death. Since photochemically generated oxidants promote ubiquitous reactions with various biomolecules, researchers simply assumed that all cellular structures are equally damaged. In this study, biochemical, molecular, biological and advanced microscopy techniques were employed to investigate whether protein, membrane or DNA damage correlates better with dose-dependent microbial inactivation kinetics. We showed that although mild membrane permeabilization and late DNA damage occur, no correlation with inactivation kinetics was found. On the other hand, protein degradation was analyzed by three different methods and showed a dose-dependent trend that matches microbial inactivation kinetics. Our results provide a deeper mechanistic understanding of aPDT that can guide the scientific community toward the development of optimized photosensitizing drugs and also rationally propose synergistic combinations with antimicrobial chemotherapy.

Inhibition of osteoclastogenesis after bisphosphonate therapy discontinuation: an in vitro approach.

Osteoclasts are specialized cells that degrade and resorb bone. Bisphosphonates (BPs) are drugs with well-known capacity to inhibit the resorption of mineralized tissues. Nitrogen-containing BPs, like alendronate (ALN) and zoledronic acid (ZA), inactivate osteoclast activity mostly by alterations on the cytoskeleton architecture of the cell. In this study, we used an in vitro model to test the hypothesis that bisphosphonates may have inhibitory effects on the osteoclastogenesis and osteoclast activity after the therapy was discontinued. Primary osteoclasts were generated from mouse bone marrow in media supplemented with 1,25-dihydroxyvitamin D3 and cultivated over bones pre-treated with ALN and ZA. The pre-saturation of the bone slices with bisphosphonates did not affect cell viability. We found, however, that by disrupting the gene expression of RANKL and OPG the osteoclastogenesis and resorption activity of osteoclasts was significantly disturbed. These inhibitory effects were confirmed by scanning electron microscopy resorption assay, assessment of osteoclast ultrastructure, and by gene expression analysis of TRAP and Cathepsin K. In conclusion, ALN and ZA adhered to the bone matrix reduced the osteoclast activity in vitro.

Effects of Alendronate and Dexamethasone on Osteoclast Gene Expression and Bone Resorption in Mouse Marrow Cultures.

Osteoclasts are cells whose main function is the resorption of bone matrix. However, several factors, including medications, can interfere with the resorption process. Alendronate (ALN), a nitrogen-containing type of bisphosphonate, and dexamethasone (DEX), a glucocorticoid, are drugs that may affect the resorption activity. The aim of this study is to investigate the effects of ALN, and/or DEX on osteoclast gene expression and resorption activity in primary mouse marrow cultures stimulated with 1,25-dihydroxyvitamin D3, a model for the bone microenvironment. Cultures were treated only with ALN (10-5 M), DEX (10-6 M), and with a combination of both agents. Viability assays performed at days 5, 7, and 9 showed the highest number of viable cells at day 7. All the following assays were then performed at day 7 of cell culture: tartrate resistant acid phosphatase (TRAP) histochemistry, receptor activator of nuclear factor kappa B ligand (RANKL) immunofluorescence, osteoprotegerin (OPG), and RANKL gene expression by qPCR and resorption analysis by scanning electron microscopy. Treatment with ALN, DEX, and the combination of both did not promote significant changes in the number of TRAP+ cells, although larger giant cells were detected in groups treated with DEX. DEX treatment increased the gene expression of RANKL and reduced OPG. The treatment with ALN reduced the depth of the resorption pits, but their inhibitory effect was less effective when administered with DEX.

Influence of heat treatment and oxygen doping on the mechanical properties and biocompatibility of titanium-niobium binary alloys.

The most commonly used titanium (Ti)-based alloy for biological applications is Ti-6Al-4V, but some studies associate the vanadium (V) with the cytotoxic effects and adverse reactions in tissues, while aluminum (Al) has been associated with neurological disorders. Ti-Nb alloys belong to a new class of Ti-based alloys with no presence of Al and V and with elasticity modulus values that are very attractive for use as a biomaterial. It is well known that the presence of interstitial elements (such as oxygen, for example) changes the mechanical properties of alloys significantly, particularly the elastic properties, the same way that heat treatments can change the microstructure of these alloys. This article presents the effect of heat treatment and oxygen doping in some mechanical properties and the biocompatibility of three alloys of the Ti-Nb system, characterized by density measurements, X-ray diffraction, optical microscopy, Vickers microhardness, in vitro cytotoxicity, and mechanical spectroscopy.

Scanning electron microscopy in vitro study on the effect of Carisolv application on periodontally diseased root surfaces.

The purpose of this study was to evaluate the characteristics of diseased root surfaces treated by the association of scaling and the application of Carisolv. Twenty-four uniradicular periodontally involved teeth were used in this study. The teeth were divided randomly into three groups: eight teeth were scaled and root planed until there was a complete visible removal of calculus (group 1), Carisolv was applied on the root surfaces of eight teeth twice for 30 seconds before scaling with a sharp curette (group 2), and eight teeth received the same treatment as in group 2 but with a blunt curette (group 3). Specimens were examined using scanning electron microscopy. The superficial aspect of the roots from group 1 presented scratches that mirrored the curette cutting edge, and the smear layer completely covered the surface. Root surfaces from groups 2 and 3 also presented a smear layer that covered the surface completely, but it was somewhat smoother than group 1. The use of Carisolv as an adjunct to scaling and root planing presented no advantage for smear layer removal over scaling alone, suggesting that no benefit is obtained by the use of Carisolv during periodontal mechanical treatment.

Wound healing process with different photobiomodulation therapy protocols to treat 5-FU-induced oral mucositis in hamsters.

OBJECTIVES: The aim of this study was to analyze the effects of three different Photobiomodulation Therapy (PBMT) protocols in the treatment of 5-fluorouracil-induced oral mucositis in hamsters. DESIGN: 60 hamsters were divided into five groups: group "C", which did not receive oral mucosa scratching, 5-fluorouracil (5-FU) or PBMT; group "Ch", which received anesthesia, superficial oral mucosa scratching and 5-FU (oral mucositis induction); and three groups that received oral mucositis induction and a PBMT protocol: groups ChLI, ChLII and ChLIII that received 0.24 J (one point), 1 J (one point) and 1.2 J (five points of 0.24 J) of energy, respectively. The laser equipment used had λ = 660 nm and 0.04 cm2 of spot area (0.226 cm diameter). The animals were euthanized on days 7 and 10 of the experiment, and their oral mucosas were removed for histological (light microscopy and collagen staining), immunohistochemical (NF-kB and TNF-α), and biochemical (TNF-α, NF-kB and hydroxyproline) analysis. RESULTS: Group ChLI (less energy), showed the most accelerated repair rates and a lower concentration of inflammatory biomarkers than group Ch. Comparing the three PBMT protocols for treatment of 5-FU-induced oral mucositis in hamsters, the one with low energy (0.24 J) showed better results, regarding reduction of inflammatory biomarkers and tissue repair, than the ones with higher energy (1 and 1.2 J).

Comparison of dentin root canal permeability and morphology after irradiation with Nd:YAG, Er:YAG, and diode lasers.

The aim of this study was to compare the effects of Nd:YAG, Er:YAG, and diode lasers on the morphology and permeability of root canal walls. The three laser wavelengths mentioned interact differently with dentin and therefore it is possible that the permeability changes caused will determine different indications during endodontic treatment. Twenty-eight human single-rooted teeth were instrumented up to ISO 40 and divided into four groups: group C, control (GC), non-laser irradiated; group N (GN), irradiated with Nd:YAG laser; group E (GE), with Er:YAG laser and group D (GD) with diode laser. After that, the roots were filled with a 2% methylene blue dye, divided into two halves and then photographed. The images were analyzed using Image J software and the percentage of dye penetration in the cervical, middle, and apical root thirds were calculated. Additional scanning electron microscopy (SEM) analyses were also performed. The analysis of variance (ANOVA) showed significant permeability differences between all groups in the middle and cervical thirds (p < 0.05). The Tukey test showed that in the cervical third, GN presented means of dye penetration statistically significantly lower than all of the other groups. In the middle third, GE and GD showed statistically higher dye penetration means than GC and GN. SEM analysis showed melted surfaces for GN, clean wall surfaces with open dentinal tubules for GE, and mostly obliterated dentinal tubules for GD. Er:YAG (2,094 nm) laser and diode laser (808 nm) root canal irradiation increase dentinal permeability and Nd:YAG (1,064 nm) laser decreases dentin permeability, within the studied parameters.

Adhesives bonded to erbium:yttrium-aluminum-garnet laser-irradiated dentin: transmission electron microscopy, scanning electron microscopy and tensile bond strength analyses.

The aim of this in vitro study was to investigate the effect of erbium:yttrium-aluminum-garnet (Er:YAG) laser irradiation on dentinal collagen by transmission electron microscopy and to analyze the resin-dentin interface by scanning electron microscopy. A tensile bond strength test was also applied. Specimens from 69 sound human third molars were randomly divided into three groups: control (no laser), and two irradiated groups, laser 250 (250 mJ/2 Hz) and laser 400 (400 mJ/4 Hz). Then, specimens were restored with two adhesive systems, an etch-and-rinse or a self-etch system. Although ultrastructural examination showed a modified surface in the irradiated dentin, there was no statistical difference in bond strength values between the laser groups and controls (P < 0.05). In conclusion, the use of Er:YAG laser for ablating human dentin did not alter the main adhesion parameters when compared with those obtained by conventional methods, thus reinforcing its use in restorative dentistry.

Ultrastructure of the interface between periodontal tissues and titanium mini-implants.

OBJECTIVE: To describe the ultrastructure of the interface between periodontal tissues and titanium mini-implants in rat mandibles. MATERIALS AND METHODS: A titanium mini-implant was placed between the buccal roots of the mandibular first molar of 24 adult rats. After 21, 30, 45, 60, 90, and 120 days of implantation, the mandibular portion was removed and fixed in cacodylate-buffered 2% glutaraldehyde + 2.5% formaldehyde. The material was decalcified and processed for scanning and transmission electron microscopy. RESULTS: Ultrastructural analysis revealed a thin cementum-like layer at longer times after implantation at the areas in which the periodontal ligament was in contact with the implant. CONCLUSIONS: The alveolar bone and the periodontal ligament reorganized their constituents around the implant, and a thin cementum-like layer was formed at longer times after implantation at the areas in which the periodontal ligament was in contact with the implant.

Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM) for the Examination of Dental Hard Tissues.

This chapter describes laboratory protocols for TEM and SEM approaches allowing the examination of the dental hard tissues' constituents at the ultrastructural level. TEM has the highest resolution power to examine the cellular and extracellular matrix ultrastructure inside a given sample, detecting the presence, location, and quantification of organelles related to the metabolism of the cell type as well as membrane specializations. SEM allows the observation of the sample surface, for examining dimensional topography and distribution of exposed features.

Phototherapy is unable to exert beneficial effects on orthodontic tooth movement in rat molars.

OBJECTIVES: To investigate the effects of irradiation lasers and light-emitting diode (LED) light on root resorption in rat molars during orthodontic tooth movement (OTM). MATERIALS AND METHODS: Twenty-one 12-week-old Wistar male rats were divided into three groups: OTM only (control [CG]), OTM and LED irradiation (DG), and OTM and low laser irradiation therapy (LG). The distance between the first and second molars was used to evaluate the amount of tooth movement. The mesial surfaces of the distopalatal roots were analyzed by scanning electron microscopy, and the area of the resorption was calculated. RESULTS: Statistical analysis showed a decreased amount of tooth movement in the exposed DG or LG compared with CG, which was statistically significant (P = .031 and P = .004, respectively). However, when the DG and LG groups were compared, no statistically significant differences were found (P = .504). The root resorption areas were similar between CG and DG. However, statistically significant differences were found between LG and CG (P = .014) and LG and DG (P = .038). CONCLUSIONS: Phototherapy did not enhance tooth movement, while infrared laser irradiation did increase root resorption.

Roughness of human enamel surface submitted to different prophylaxis methods.

The purpose of this in vitro study was to evaluate alterations in the surface roughness and micromorphology of human enamel submitted to three prophylaxis methods. Sixty-nine caries-free molars with exposed labial surfaces were divided into three groups. Group I was treated with a rotary instrument set at a low speed, rubber cup and a mixture of water and pumice; group II with a rotary instrument set at a low speed, rubber cup and prophylaxis paste Herjos-F (Vigodent S/A Indústria e Comércio, Rio de Janeiro, Brazil); and group III with sodium bicarbonate spray Profi II Ceramic (Dabi Atlante Indústrias Médico Odontológicas Ltda, Ribeirão Preto, Brazil). All procedures were performed by the same operator for 10 s, and samples were rinsed and stored in distilled water Pre and post-treatment surface evaluation was completed using a surface profilometer (Perthometer S8P, Marh, Perthen, Germany) in 54 samples. In addition, the other samples were coated with gold and examined in a scanning electron microscope (SEM). The results of this study were statistically analyzed with the paired t-test (Student), the Kruskal-Wallis test and the Dunn (5%) test. The sodium bicarbonate spray led to significantly rougher surfaces than the pumice paste. The use of prophylaxis paste showed no statistically significant difference when compared with the other methods. Based on SEM analysis, the sodium bicarbonate spray presented an irregular surface with granular material and erosions. Based on this study, it can be concluded that there was an increased enamel surface roughness when teeth were treated with sodium bicarbonate spray when compared with teeth treated with pumice paste.

A comprehensive analysis of human dental pulp cell spheroids in a three-dimensional pellet culture system.

OBJECTIVE: Three-dimensional (3D) cell culture methods are of high importance to studies of biological processes. This is particularly the case with spheroid cultures, which create 3D cell aggregates without the use of exogenous materials. Compared to conventional monolayer cultures, cellular spheroid cultures have been demonstrated to improve multilineage potential and extracellular matrix production. To address this issue in depth, we present a more comprehensive analysis of 3D human dental pulp cell (hDPC) spheroids. DESIGN: hDPC spheroids were fabricated by the pellet culture method and were cultured without adding any reagent to induce differentiation. The gene-expression profiles of the 3D and two-dimensional (2D) cultured hDPCs were compared by complementary DNA microarray analysis. Odontoblastic and osteoblastic differentiation marker gene expression was evaluated by quantitative real-time PCR (RT-qPCR). Hematoxylin-eosin (HE) staining and transmission electron microscopy (TEM) were applied to examine the morphology of hDPC spheroids and extracellular matrix components. RESULTS: Compared with 2D monolayer culture, microarray analysis identified 405 genes and 279 genes with twofold or greater differential expression after 3 days and 28 days of 3D culture, respectively. In 3D hDPC spheroids, gene ontology analysis revealed upregulation of extracellular matrix-related genes and downregulation of cell growth-related genes. RT-qPCR analysis showed higher expression levels of osteocalcin, dentin sialophosphoprotein, and alkaline phosphatase. TEM revealed the morphological characteristics of the fibrillar collagen-rich matrix and cell-cell interactions. CONCLUSIONS: The present findings provide clues to understanding the mechanisms of pellet-cultured hDPCs and contribute to future research in the comparative studies of different 3D culture methods.

Low-power laser irradiation decreases lipid droplet accumulation in the parotid glands of diabetic rats.

Lipid droplet accumulation has been related to salivary gland hypofunction in diabetes. In this study, the effect of laser irradiation on the parotid glands (PGs) of diabetic rats was analyzed with regard to its effect on lipid droplet accumulation, intracellular calcium concentration and calmodulin expression. The animals were distributed into 6 groups: D0, D5, D20 and C0, C5, C20, for diabetic (D) and control animals (C), respectively. Twenty-nine days following diabetes induction, PGs of groups D5 and C5; D20 and C20 were irradiated with 5 and 20 J/cm2 of a red diode laser at 100 mW, respectively. After 24 hours, PGs were removed for histological, biochemical, and western blotting analysis. The diabetic animals showed lipid droplet accumulation, which was decreased after irradiation. Ultrastructurally, the droplets were nonmembrane bound and appeared irregularly located in the cytoplasm. Moreover, diabetic animals showed an increased intracellular calcium concentration. In contrast, after laser irradiation a progressive decrease in the concentration of this ion was observed, which would be in agreement with the results found in the increased expression of calmodulin in D20. These data are promising for using laser to decrease lipid droplet accumulation in PGs, however, more studies are necessary to better understand its mechanisms. Micrographs showing decreased lipid accumulation after laser irradiation in light micrographs (LM), and morphology of lipid droplet in transmission electron microscopic (TEM). LM: (A) PGs from nondiabetic rats that did not receive Laser irradiation (LI), (B) PGs from nondiabetic rats that received a dose of 20 J/cm2 , (C) lipid accumulation (arrows) in the secretory cells from diabetic rats that did not receive irradiation, (D) reduction of lipid accumulation in the secretory cells from diabetic rats that received a dose of 20 J/cm2 and TEM: (E) scale bar = 5 µm, (F) scale bar = 1 µm, and (G) scale bar = 0.5 µm.

Ion-releasing dental restorative composites containing functionalized brushite nanoparticles for improved mechanical strength.

OBJECTIVES: This study describes the synthesis of brushite nanoparticles (CaHPO4·2H2O) functionalized with triethylene glycol dimethacrylate (TEGDMA) and their application in dental restorative composites with remineralizing capabilities. METHODS: Nanoparticles were synthesized, with TEGDMA being added to one of the precursor solutions at three different molar ratios (0:1, 0.5:1 and 1:1, in relation to the ammonium phosphate precursor). Then, they were added (10 vol%) to a photocurable dimethacrylate matrix containing 50 vol% of reinforcing glass particles. The resulting composites were tested for degree of conversion, biaxial flexural strength and elastic modulus (after 24h and 28days in water), and ion release (over a 28-day period). Commercial composites (one microhybrid and one microfilled) were tested as controls. RESULTS: The final TEGDMA content in the functionalizing layer was modulated by the molar ratio added to the precursor solution. Functionalization reduced nanoparticle size, but did not reduce agglomeration. Improved mechanical properties were found for the composite containing nanoparticles with higher TEGDMA level in comparison to the composite containing non-functionalized nanoparticles or those with a low TEGDMA level. All brushite composites presented statistically significant reductions in strength after 28 days in water, but only the material with high-TEGDMA nanoparticles retained strength similar to the microhybrid commercial control. Overall, ion release was not affected by functionalization and presented steady levels for 28 days. SIGNIFICANCE: Though agglomeration was not reduced by functionalization, the improvement in the matrix-nanoparticle interface allowed for a stronger material, without compromising its remineralizing potential.