RESUMO
BACKGROUND: Long-term use of urethral catheters is associated with high risk of urinary tract infection (UTI) and blockage. Microbial biofilms are a common cause of catheter blockage, reducing their lifetime and significantly increasing morbidity of UTIs. A 0.02% polyhexanide irrigation solution developed for routine mechanical rinsing shows potential for bacterial decolonization of urethral catheters and has the potential to reduce or prevent biofilm formation. METHODS: Using an in vitro assay with standard market-leading types of catheters artificially contaminated with clinically relevant bacteria, assays were carried out to evaluate the biofilm reduction and prevention potential of a 0.02% polyhexanide solution versus no intervention (standard approach) and irrigation with saline solution (NaCl 0.9%). The efficiency of decolonization was measured through microbial plate count and membrane filtration. RESULTS: Irrigation using a 0.02% polyhexanide solution is suitable for the decolonization of a variety of transurethral catheters. The effect observed is significant compared to irrigation with 0.9% saline solution (p = 0.002) or no treatment (p = 0.011). No significant difference was found between irrigation with 0.9% saline solution and no treatment (p = 0.74). CONCLUSIONS: A 0.02% polyhexanide solution is able to reduce bacterial biofilm from catheters artificially contaminated with clinically relevant bacteria in vitro. The data shows a reduction of the viability of thick bacterial biofilms in a variety of commercially available urinary catheters made from silicone, latex-free silicone, hydrogel-coated silicone and PVC. Further research is required to evaluate the long-term tolerability and efficacy of polyhexanide in clinical practice.
Assuntos
Biguanidas/farmacologia , Biofilmes/efeitos dos fármacos , Desinfetantes/farmacologia , Contaminação de Equipamentos/prevenção & controle , Cateteres Urinários/microbiologia , Biguanidas/administração & dosagem , Desinfetantes/administração & dosagem , Humanos , Irrigação TerapêuticaRESUMO
BACKGROUND: Long-term use of indwelling urethral catheters is associated with high risk of urinary tract infection (UTI) and blockage, which may in turn cause significant morbidity and reduce the life of the catheter. A 0.02% polyhexanide irrigation solution has been developed for routine mechanical rinsing together with bacterial decolonization of suprapubic and indwelling urethral catheters. METHODS: Using a practice-like in vitro assay and standard silicon catheters, artificially contaminated with clinically relevant bacteria, experiments were carried out to evaluate the bacterial decolonization potential of polyhexanide vs. 1) no intervention (standard approach) and 2) irrigation with a saline (NaCl 0.9%) solution. Swabbing and irrigation was used to extract the bacteria. RESULTS: Irrigation with polyhexanide reduced the microbial population vs. the control catheters by a factor of 1.64 log10 (swab extraction) and by a factor of 2.56 log10 (membrane filtration). The difference in mean microbial counts between the two groups (0.90) was statistically significant in favor of polyhexanide when the liquid extraction method was used (p = 0.034). The difference between the two groups using the swab extraction method did not reach statistical significance. CONCLUSIONS: The saline and polyhexanide solutions are able to reduce bacterial load of catheters, which shows a combined mechanical and antimicrobial effect. Further research is required to evaluate the long-term tolerability and efficacy of polyhexanide in clinical practice.
Assuntos
Carga Bacteriana/efeitos dos fármacos , Carga Bacteriana/fisiologia , Biguanidas/administração & dosagem , Cateteres de Demora/microbiologia , Desinfetantes/administração & dosagem , Infecções Relacionadas a Cateter/prevenção & controle , Contagem de Colônia Microbiana/métodos , Composição de Medicamentos , Humanos , Soluções Farmacêuticas/administração & dosagem , Staphylococcus aureus/efeitos dos fármacos , Staphylococcus aureus/crescimento & desenvolvimento , Staphylococcus aureus/isolamento & purificação , Cateterismo Urinário/efeitos adversos , Cateterismo Urinário/métodos , Infecções Urinárias/etiologia , Infecções Urinárias/prevenção & controleRESUMO
BACKGROUND: Adenoviruses belong to the stable nonenveloped viruses playing an important role in healthcare-associated infections mainly causing respiratory infections and epidemic keratoconjunctivitis. Hand disinfection with alcoholic preparations is therefore one of the most important measures to prevent such viral infections in hospitals and other medical settings. METHODS: The inactivation of adenovirus type 5 by ethanol, 1- and 2-propanol, and 2 commercially available hand disinfectants was examined at different concentrations, temperatures, and pH-values. RESULTS: For ethanol and 1-propanol the maximum virus-inactivating properties after 30 seconds exposure were found at a concentration of 60%-70% and 50%-60%, respectively, whereas with 2-propanol no activity was observed. The virucidal activity of all alcohols and the 2 hand disinfectants examined was increased when raising the temperature from 20°C to 25°C. By increasing the pH value to 9, a strong improvement of the activity of ethanol, 1-propanol and 1 hand disinfectant was observed, whereas pH lowering resulted in decrease of activity. CONCLUSIONS: These results demonstrate the importance of physical parameters in the inactivation of adenoviruses by alcohols and will help to improve measures to reduce adenovirus transmission in healthcare settings.
Assuntos
Adenovírus Humanos , Desinfetantes , Higienizadores de Mão , Humanos , Álcoois/farmacologia , Temperatura , 2-Propanol , 1-Propanol , Desinfetantes/farmacologia , Etanol/farmacologia , Concentração de Íons de HidrogênioRESUMO
To assess whether in-silico models can be used to predict the risk of thrombus formation in pulmonary artery pressure sensors (PAPS), a chronic animal study using pigs was conducted. Computed tomography (CT) data was acquired before and immediately after implantation, as well as one and three months after the implantation. Devices were implanted into 10 pigs, each one in the left and right pulmonary artery (PA), to reduce the required number of animal experiments. The implantation procedure aimed at facilitating optimal and non-optimal positioning of the devices to increase chances of thrombus formation. Eight devices were positioned non-optimally. Three devices were positioned in the main PA instead of the left and right PA. Pre-interventional PA geometries were reconstructed from the respective CT images, and the devices were virtually implanted at the exact sites and orientations indicated by the follow-up CT after one month. Transient intra-arterial hemodynamics were calculated using computational fluid dynamics. Volume flow rates were modelled specifically matching the animals body weights. Wall shear stresses (WSS) and oscillatory shear indices (OSI) before and after device implantation were compared. Simulations revealed no relevant changes in any investigated hemodynamic parameters due to device implantation. Even in cases, where devices were implanted in a non-optimal manner, no marked differences in hemodynamic parameters compared to devices implanted in an optimal position were found. Before implantation time and surface-averaged WSS was 2.35±0.47 Pa, whereas OSI was 0.08±0.17, respectively. Areas affected by low WSS magnitudes were 2.5±2.7 cm2, whereas the areas affected by high OSI were 18.1±6.3 cm2. After device implantation, WSS and OSI were 2.45±0.49 Pa and 0.08±0.16, respectively. Surface areas affected by low WSS and high OSI were 2.9±2.7 cm2, and 18.4±6.1 cm2, respectively. This in-silico study indicates that no clinically relevant differences in intra-arterial hemodynamics are occurring after device implantation, even at non-optimal positioning of the sensor. Simultaneously, no embolic events were observed, suggesting that the risk for thrombus formation after device implantation is low and independent of the sensor position.
RESUMO
To facilitate pre-clinical animal and in-silico clinical trials for implantable pulmonary artery pressure sensors, understanding the respective species pulmonary arteries (PA) anatomy is important. Thus, morphological parameters describing PA of pigs and sheep, which are common animal models, were compared with humans. Retrospective computed tomography data of 41 domestic pigs (82.6 ± 18.8 kg), 14 sheep (49.1 ± 6.9 kg), and 49 patients (76.8 ± 18.2 kg) were used for reconstruction of the subject-specific PA anatomy. 3D surface geometries including main, left, and right PA as well as LPA and RPA side branches were manually reconstructed. Then, specific geometric parameters (length, diameters, taper, bifurcation angle, curvature, and cross-section enlargement) affecting device implantation and post-interventional device effect and efficacy were automatically calculated. For both animal models, significant differences to the human anatomy for most geometric parameters were found, even though the respective parameters' distributions also featured relevant overlap. Out of the two animal models, sheep seem to be better suitable for a preclinical study when considering only PA morphology. Reconstructed geometries are provided as open data for future studies. These findings support planning of preclinical studies and will help to evaluate the results of animal trials.
Assuntos
Artéria Pulmonar , Tomografia Computadorizada por Raios X , Humanos , Ovinos , Animais , Suínos , Artéria Pulmonar/diagnóstico por imagem , Artéria Pulmonar/anatomia & histologia , Estudos Retrospectivos , Sus scrofa , HipertrofiaRESUMO
Introduction: Multi-professional interdisciplinary tumor boards (ITB) are essential institutions to discuss all newly diagnosed, relapsed or complex cancer patients in a team of specialists to find an optimal cancer care plan for each individual patient with regard to national and international clinical practice guidelines, patient´s preference and comorbidities. In a high-volume cancer center, entity-specific ITBs take place at least once a week discussing a large number of patients. To a high level of expertise and dedication, this also requires an enormous amount of time for physicians, cancer specialists and administrative support colleagues, especially for radiologists, pathologists, medical oncologists and radiation oncologists, who must attend all cancer-specific boards according to certification requirements. Methods: In this 15-month prospective German single-center analysis, we examined the established structures of 12 different cancer-specific ITBs at the certified Oncology Center and demonstrate tools helping to optimize processes before, during and after the boards for optimal, time-saving procedures. Results: By changing pathways, introducing revised registration protocols and new digital supports we could show that the workload of preparation by radiologists and pathologists could be reduced significantly by 22.9% (p=<0.0001) and 52.7% (p=<0.0001), respectively. Furthermore, two questions were added to all registration forms about the patient´s need for specialized palliative care support that should lead to more awareness and early integration of specialized help. Discussion: There are several ways to reduce the workload of all ITB team members while maintaining high quality recommendations and adherence to national and international guidelines.
RESUMO
Background: In recent years, resistance to antibiotics has become a global threat, and alternatives to antibiotics have become an area of research. The main alternative methods are briefly described in this review. However, the main focus is bacteriophage-related therapy. Bacteriophages are viruses which, due to the production of the enzyme endolysin, are able to kill bacterial host cells. Bacteriophage therapies have a long tradition. Their potential to function as antibiotics lies in their bactericidal activity and specificity in killing bacteria without infecting or affecting eukaryotic cells. Objective: To systematically review the outcomes of bacteriophage therapy in patients with bacterial infections. Methods: The MEDLINE, EMBASE, Web of Science and CENTRAL databases were searched electronically using search terms referring to bacteriophages, endolysins and antimicrobial resistance. After the literature was screened for their titles and abstracts, full-text reviews considering inclusion/exclusion criteria were performed. Data concerning patients with bacterial infections, treatment with either bacteriophages or its enzyme endolysin and their outcomes were extracted and analysed. Results: Thirteen publications were identified that met all inclusion criteria. Data extraction shows that bacteriophages or endolysins have the potential to combat bacterial infections and significantly reduce inflammatory mediators. However, 3 out of 4 randomized controlled trials revealed that there was no significant difference between phage/endolysin treated patients and control group. Significant clinical improvements were seen in cohort and case studies. A few minor side effects were reported. Conclusions: Although there are countries in which bacteriophages are prescribed as an alternative to established antibiotics, this valuable experience has yet to be examined sufficiently in clinical trials conducted to modern standards. Despite improvements in symptoms shown in the reviewed clinical trials, the infection and the bacteria themselves were rarely completely eradicated. Therefore, no definite answer can be given as to effectiveness, and further clinical trials are necessary.
RESUMO
This work describes the synthesis of covalent ssDNA conjugates of six fluorescent proteins, ECFP, EGFP, E(2)GFP, mDsRed, Dronpa, and mCherry, which were cloned with an accessible C-terminal cystein residue to enable site-selective coupling using a heterobispecific cross-linker. The resulting conjugates revealed similar fluorescence emission intensity to the unconjugated proteins, and the functionality of the tethered oligonucleotide was proven by specific Watson-Crick base pairing to cDNA-modified gold nanoparticles. Fluorescence spectroscopy analysis indicated that the fluorescence of the FP is quenched by the gold particle, and the extent of quenching varied with the intrinsic spectroscopic properties of FP as well as with the configuration of surface attachment. Since this study demonstrates that biological fluorophores can be selectively incorporated into and optically coupled with nanoparticle-based devices, applications in DNA-based nanofabrication can be foreseen.
Assuntos
DNA de Cadeia Simples/química , Proteínas Luminescentes/química , Proteínas Luminescentes/genética , Oligonucleotídeos/química , Clonagem Molecular , Reagentes de Ligações Cruzadas , Escherichia coli/genética , Engenharia Genética , MutaçãoRESUMO
A pulsatility-based control algorithm with a self-adapting pulsatility reference value is proposed for an implantable rotary blood pump and is to be tested in computer simulations. The only input signal is the pressure difference across the pump, which is deduced from measurements of the pump's magnetic bearing. A pulsatility index (PI) is calculated as the mean absolute deviation from the mean pressure difference. As a second characteristic, the gradient of the PI with respect to the pump speed is derived. This pulsatility gradient (GPI) is used as the controlled variable to adjust the operating point of the pump when physiological variables such as the systemic arterial pressure, left ventricular contractility, or heart rate change. Depending on the selected mode of operation, the controller is either a linear controller or an extremum-seeking controller. A supervisory mechanism monitors the state of the system and projects the system into the region of convergence when necessary. The controller of the GPI continuously adjusts the reference value for PI. An underlying robust linear controller regulates the PI to the reference value in order to take into account changes in pulmonary venous return. As a means of reacting to sudden changes in the venous return, a suction detection mechanism was included. The control system is robustly stable within a wide range of physiological variables. All the clinician needs to do is to select between the two operating modes. No other adjustments are required. The algorithm showed promising results which encourage further testing in vitro and in vivo.
Assuntos
Algoritmos , Insuficiência Cardíaca/terapia , Coração Auxiliar , Hemodinâmica , Processamento de Sinais Assistido por Computador , Pressão Sanguínea , Simulação por Computador , Insuficiência Cardíaca/fisiopatologia , Frequência Cardíaca , Humanos , Magnetismo , Modelos Cardiovasculares , Contração Miocárdica , Desenho de Prótese , Fluxo Pulsátil , Fatores de Tempo , Função Ventricular EsquerdaRESUMO
BACKGROUND AND AIMS: Ethanol- or 2-propanol-containing disinfectant agents are widely used in medical practice, particularly in the surgical environment. It was the primary objective of this phase I study to comparatively investigate the transdermal resorption of ethanol and 2-propanol within 1 h after dermal application of the two agents as single preparations and a commercial product containing both alcohols in combination, respectively. The secondary objective was to examine whether a mutual influence of the two alcohols in combination exists. MATERIALS AND METHODS: Following the double-blind, randomized, three-times cross-over design for this clinical trial, 20 ml of three different alcohol-containing disinfectants were applied on a 200-cm(2) gauze swab on skin areas, identical in size and location, of 14 healthy volunteers for 10 min to investigate the absorption rate of ethanol and 2-propanol with special focus on the question whether the two alcohols might influence each other's absorption rate when being applied in combination. RESULTS: No clinically relevant enhancement of dermal absorption, with respect to ethanol and 2-propanol, could be observed within 1 h after application, neither when used as single preparations, nor in combination. CONCLUSION: Therefore, the use of ethanol- and 2-propanol-containing disinfectants in the medical environment can be considered as safe.
Assuntos
2-Propanol/farmacocinética , Desinfetantes/farmacocinética , Etanol/farmacocinética , Absorção Cutânea/fisiologia , Acetona/farmacocinética , Adulto , Área Sob a Curva , Estudos Cross-Over , Método Duplo-Cego , Interações Medicamentosas , Humanos , Masculino , Pessoa de Meia-Idade , Adulto JovemRESUMO
A control strategy for rotary blood pumps meeting different user-selectable control objectives is proposed: maximum support with the highest feasible flow rate versus medium support with maximum ventricular washout and controlled opening of the aortic valve (AoV). A pulsatility index (PI) is calculated from the pressure difference, which is deduced from the axial thrust measured by the magnetic bearing of the pump. The gradient of PI with respect to pump speed (GPI) is estimated via online system identification. The outer loop of a cascaded controller regulates GPI to a reference value satisfying the selected control objective. The inner loop controls the PI to a reference value set by the outer loop. Adverse pumping states such as suction and regurgitation can be detected on the basis of the GPI estimates and corrected by the controller. A lumped-parameter computer model of the assisted circulation was used to simulate variations of ventricular contractility, pulmonary venous pressure, and aortic pressure. The performance of the outer control loop was demonstrated by transitions between the two control modes. Fast reaction of the inner loop was tested by stepwise reduction of venous return. For maximum support, a low PI was maintained without inducing ventricular collapse. For maximum washout, the pump worked at a high PI in the transition region between the opening and the permanently closed AoV. The cascaded control of GPI and PI is able to meet different control objectives and is worth testing in vitro and in vivo.
Assuntos
Coração Auxiliar , Modelos Cardiovasculares , Algoritmos , Simulação por Computador , Desenho de Equipamento , Humanos , Fluxo Pulsátil/fisiologiaRESUMO
The concept of sequence-definition in the sense of polymer chemistry is introduced to conjugated, rod-like oligo(phenylene ethynylene)s via an iterative synthesis procedure. Specifically, monodisperse sequence-defined trimers and pentamers were prepared via iterative Sonogashira cross-coupling and deprotection. The reaction procedure was extended to tetra- and pentamers for the first time yielding a monodisperse pentamer with 18% and a sequence-defined pentamer with 3.2% overall yield. Furthermore, three novel trimers with a 9H-fluorene building block at predefined positions within the phenylene ethynylene chain were synthesised in 23-52% overall yields. Hence, it was confirmed that a functionality of interest can be incorporated selectively at a pre-defined position of these monodisperse oligomers. All respective intermediate structures were fully characterised by proton and carbon NMR, mass spectrometry, size-exclusion chromatography, and IR spectroscopy. Additionally, thermal and optical transitions are reported for the different oligomers.
RESUMO
BACKGROUND: Surgical hand preparation is an essential part of modern surgery. Both alcohol-based and antiseptic detergent-based hand preparation are recommended practices, with a trend towards use of alcohol based handrubs. However, discussion has arisen whether chlorhexidine is a required ingredient in highly efficacious alcohol-based formulations, in view of providing sustained antimicrobial efficacy. METHODS: One alcohol-only formulation (product A), containing ethanol and n-propanol, and one formulation containing a chlorhexidine-ethanol combination (product B) were directly compared with each other using a modified test protocol based on European standard EN 12791 (2016) with 25 volunteers. The alcohol-only formulation (product A) was applied for only 90 s, the chlorhexidine-alcohol formulation (product B) for 180 s. Microbial log reduction factors were determined and statistically compared immediately after application and at 6 h under surgical gloves. RESULTS: The alcohol-only formulation (product A) achieved mean log reduction factors of 1.96 ± 1.06 immediately after application and 1.67 ± 0.71 after 6 h. The chlorhexidine-alcohol combination (product B) achieved mean log reduction factors of 1.42 ± 0.79 and 1.24 ± 0.90 immediately and after 6 h, respectively. The values for product A were significantly greater than those for product B at both measured time points (p ≤ 0.025 immediately after application and p ≤ 0.01 after 6 h). CONCLUSIONS: An optimized alcohol-only formulation tested according to a modified EN 12791 protocol in 25 healthy volunteers outperformed a chlorhexidine-alcohol formulation both immediately after application and at 6 h under surgical gloves, despite a much shorter application time. Thus, optimized alcohol-only formulations do not require chlorhexidine to achieve potent immediate and sustained efficacy. In conclusion, chlorhexidine is not an essential component for alcohol-based surgical hand preparation.
RESUMO
The development of nanobiotechnological devices requires the ability to build various components with nanometer accuracy. DNA is a well-established nanoscale building block that self assembles due to specific interactions that are encoded in its sequence. Recently, it has become possible to couple proteins to DNA, thereby expanding the capabilities of DNA for use with molecular photonics and bioelectronics. Here, we present the design and characterization of a supramolecular Förster resonance energy transfer (FRET) system by using a fluorescent protein bound to single-stranded DNA (ssDNA), a fluorophore attached to a second ssDNA molecule, and a complementary strand for hybridizing the two fluorophores together. The FRET efficiency was studied by using both ensemble and single-pair FRET measurements. The distance between the two fluorophores was determined from the single-pair FRET efficiency and could be described by a simple cylindrical model for the DNA. Hence, DNA can be used as a scaffold for positioning fluorescent proteins, as well as traditional fluorophores, with nanometer accuracy and shows great potential for use in the future of nanobiotechnology.
Assuntos
Biotecnologia , DNA , Transferência Ressonante de Energia de Fluorescência , Nanotecnologia , Proteínas , DNA/análise , DNA/química , Corantes Fluorescentes , Proteínas/análise , Proteínas/químicaRESUMO
BACKGROUND: The etiology of multiple sclerosis (MS) has remained unclear, but a causative contribution of factors outside the central nervous system (CNS) is conceivable. It was recently suggested that gut bacteria trigger the activation of CNS-reactive T cells and the development of demyelinative disease. METHODS: C57BL/6 (B6) mice were kept either under specific pathogen free or conventional housing conditions, immunized with the myelin basic protein (MBP)-proteolipid protein (PLP) fusion protein MP4 and the development of EAE was clinically monitored. The germinal center size of the Peyer's patches was determined by immunohistochemistry in addition to the level of total IgG secretion which was assessed by ELISPOT. ELISPOT assays were also used to measure MP4-specific T cell and B cell responses in the Peyer's patches and the spleen. Ear swelling assays were performed to determine the extent of delayed-type hypersensitivity reactions in specific pathogen free and conventionally housed mice. RESULTS: In B6 mice that were actively immunized with MP4 and kept under conventional housing conditions clinical disease was significantly attenuated compared to specific pathogen free mice. Conventionally housed mice displayed increased levels of IgG secretion in the Peyer's patches, while the germinal center formation in the gut and the MP4-specific TH17 response in the spleen were diminished after immunization. Accordingly, these mice displayed an attenuated delayed type hypersensitivity (DTH) reaction in ear swelling assays. CONCLUSIONS: The data corroborate the notion that housing conditions play a substantial role in the induction of murine EAE and suggest that the presence of gut bacteria might be associated with a decreased immune response to antigens of lower affinity. This concept could be of importance for MS and calls for caution when considering the therapeutic approach to treat patients with antibiotics.
Assuntos
Encefalomielite Autoimune Experimental/imunologia , Trato Gastrointestinal/imunologia , Trato Gastrointestinal/microbiologia , Animais , Linfócitos B/imunologia , Sistema Nervoso Central/imunologia , ELISPOT/métodos , Feminino , Centro Germinativo/imunologia , Hipersensibilidade Tardia/imunologia , Imunização/métodos , Imunoglobulina G/imunologia , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Esclerose Múltipla/imunologia , Proteína Proteolipídica de Mielina/imunologia , Nódulos Linfáticos Agregados/imunologia , Baço/imunologia , Linfócitos T/imunologia , Células Th17/imunologiaRESUMO
Left ventricular assist devices (LVADs) are carefully designed, but the significance of the implantation configuration and interaction with the vasculature is complex and not fully determined. The present study employs computational fluid dynamics to investigate the importance of applying a realistic LVAD profile when evaluating assisted aortic flow fields and subsequently compares a number of potential anastomosis locations in a patient-specific aortic geometry. The outflow profile of the Berlin Heart INCOR® device was provided by Berlin Heart GmbH (Berlin, Germany) and the cannula was attached at a number of locations on the aorta. Simulations were conducted to compare a flat profile against the real LVAD profile. The results illustrate the importance of applying an LVAD profile. It not only affects the magnitude and distribution of oscillatory shear index, but also the distribution of flow to the great arteries. The ascending aorta was identified as the optimal location for the anastomosis.
Assuntos
Anastomose Cirúrgica , Aorta/anatomia & histologia , Coração Auxiliar , HumanosRESUMO
This study presents a numerical simulation of cardiovascular response in the heart failure condition under the support of a Berlin Heart INCOR impeller pump-type ventricular assist device (VAD). The model is implemented using the CellML modelling language. To investigate the potential of using the Berlin Heart INCOR impeller pump to produce physiologically meaningful arterial pulse pressure within the various physiological constraints, a series of VAD-assisted cardiovascular cases are studied, in which the pulsation ratio and the phase shift of the VAD motion profile are systematically changed to observe the cardiovascular responses in each of the studied cases. An optimization process is proposed, including the introduction of a cost function to balance the importance of the characteristic cardiovascular variables. Based on this cost function it is found that a pulsation ratio of 0.35 combined with a phase shift of 200° produces the optimal cardiovascular response, giving rise to a maximal arterial pulse pressure of 12.6 mm Hg without inducing regurgitant pump flow while keeping other characteristic cardiovascular variables within appropriate physiological ranges.