RESUMO
High quality factor optical nanostructures provide a great opportunity to enhance nonlinear optical processes such as third harmonic generation. However, the field enhancement in these high quality factor structures is typically accompanied by optical mode nonlocality. As a result, the enhancement of nonlinear processes comes at the cost of their local control as needed for nonlinear wavefront shaping, imaging, and holography. Here we show simultaneous strong enhancement and spatial control over third harmonic generation with a local high-Q metasurface relying on higher-order Mie resonant modes. Our results demonstrate third harmonic generation at an efficiency of up to 3.25 × 10-5, high quality wavefront shaping as illustrated by a third harmonic metalens, and a flatband, angle independent, third harmonic response up to ±11° incident angle. The demonstrated high level of local control and efficient frequency conversion offer promising prospects for realizing novel nonlinear optical devices.
RESUMO
Photoelectrochemical CO2 reduction (CO2R) is an appealing solution for converting carbon dioxide into higher-value products. However, CO2R in aqueous electrolytes suffers from poor selectivity due to the competitive hydrogen evolution reaction that is dominant on semiconductor surfaces in aqueous electrolytes. We demonstrate that functionalizing gold/p-type gallium nitride devices with a film derived from diphenyliodonium triflate suppresses hydrogen generation from 90% to 18%. As a result, we observe increases in the Faradaic efficiency and partial current density for carbon monoxide of 50% and 3-fold, respectively. Furthermore, we demonstrate through optical absorption measurements that the molecular film employed herein, regardless of thickness, does not affect the photocathode's light absorption. Altogether, this study provides a rigorous platform for elucidating the catalytic structure-property relationships to enable engineering of active, stable, and selective materials for photoelectrochemical CO2R.
RESUMO
In the late nineteenth century, Heinrich Hertz demonstrated that the electromagnetic properties of materials are intimately related to their structure at the subwavelength scale by using wire grids with centimetre spacing to manipulate metre-long radio waves. More recently, the availability of nanometre-scale fabrication techniques has inspired scientists to investigate subwavelength-structured metamaterials with engineered optical properties at much shorter wavelengths, in the infrared and visible regions of the spectrum. Here we review how optical metamaterials are expected to enhance the performance of the next generation of integrated photonic devices, and explore some of the challenges encountered in the transition from concept demonstration to viable technology.
RESUMO
Two-dimensional transition metal dichalcogenides (2D TMDCs) are promising candidates for ultrathin active nanophotonic elements due to the strong tunable excitonic resonances that dominate their optical response. Here, we demonstrate dynamic beam steering by an active van der Waals metasurface that leverages large complex refractive index tunability near excitonic resonances in monolayer molybdenum diselenide (MoSe2). Through varying the radiative and nonradiative rates of the excitons, we can dynamically control both the reflection amplitude and phase profiles, resulting in an excitonic phased array metasurface. Our experiments show reflected light steering to angles between -30° and 30° at different resonant wavelengths corresponding to the A exciton and B exciton. This active van der Waals metasurface relies solely on the excitonic resonances of the monolayer MoSe2 material rather than geometric resonances of patterned nanostructures, suggesting the potential to harness the tunability of excitonic resonances for wavefront shaping in emerging photonic applications.
RESUMO
Optically Mie-resonant crystalline silicon nanoparticles have long attracted interest for their unique scattering behaviors. Here, we report a bottom-up nonthermal plasma process that produces highly monodisperse particles, with diameters controllable between 60 and 214 nm, by temporarily electrostatically trapping nanoparticles inside a continuous-flow plasma reactor. The particle size is tuned by adjusting the gas residence time in the reactor. By dispersing the nanoparticles in water, optical extinction measurements indicate colloidal solutions of a particle-based metafluid in which particles support both strong magnetic and electric dipole resonances at visible wavelengths. The spectral overlap of the electric and magnetic resonances gives rise to directional Kerker scattering. The extinction measurements show excellent agreement with Mie theory, supporting the idea that the fabrication process enables particles with narrow distributions in size, shape, and composition. This single-step gas-phase process can also produce Mie-resonant nanoparticles of dielectric materials other than silicon and directly deposit them on the desired substrates.
RESUMO
The intrinsic weak and highly nonlocal dielectric screening of two-dimensional materials is well-known to lead to high sensitivity of their optoelectronic properties to environment. Less studied theoretically is the role of free carriers in those properties. Here, we use ab initio GW and Bethe-Salpeter equation calculations, with a rigorous treatment of dynamical screening and local-field effects, to study the doping dependence of the quasiparticle and optical properties of a monolayer transition-metal dichalcogenide, 2H MoTe2. We predict a quasiparticle band gap renormalization of several hundreds of meV for experimentally attainable carrier densities and a similarly sizable decrease in the exciton binding energy. This results in an almost constant excitation energy for the lowest-energy exciton resonance with an increasing doping density. Using a newly developed and generally applicable plasmon-pole model and a self-consistent solution of the Bethe-Salpeter equation, we reveal the importance of accurately capturing both dynamical and local-field effects to understand detailed photoluminescence measurements.
RESUMO
We report the design of a tunable, narrowband, thermal metasurface that employs a hybrid resonance generated by coupling a tunable permittivity graphene ribbon to a silicon photonic crystal. The gated graphene ribbon array, proximitized to a high quality factor Si photonic crystal supporting a guided mode resonance, exhibits tunable narrowband absorbance lineshapes (Q > 10,000). Actively tuned Fermi level modulation in graphene with applied gate voltage between high absorptivity and low absorptivity states gives rise to absorbance on/off ratios exceeding 60. We employ coupled-mode theory as a computationally efficient approach to elements of the metasurface design, demonstrating an orders of magnitude speedup over typical finite element computational methods.
RESUMO
Color-center-based single-photon emitters in hexagonal boron nitride (h-BN) have shown promising photophysical properties as sources for quantum light emission. Despite significant advances toward such a goal, achieving lifetime-limited quantum light emission in h-BN has proven to be challenging, primarily due to various broadening mechanisms, including spectral diffusion. Here, we propose and experimentally demonstrate suppression of spectral diffusion by applying an electrostatic field. We observe both Stark shift tuning of the resonant emission wavelength and emission line width reduction (down to 89 MHz) nearly to the homogeneously broadened lifetime limit. Finally, we find a cubic dependence of the line width with respect to temperature at the homogeneous broadening regime. Our results suggest that field tuning in electrostatically gated heterostructures is promising as an approach to control the emission characteristics of h-BN color centers, removing spectral diffusion and providing the energy tunability necessary for integrate of quantum light emission in nanophotonic architectures.
RESUMO
Carrier excitation and decay processes in graphene are of broad interest since relaxation pathways that are not present in conventional materials are enabled by a gapless Dirac electronic band structure. Here, we report that a previously unobserved decay pathway-hot plasmon emission-results in Fermi-level-dependent mid-infrared emission in graphene. Our observations of non-thermal contributions to Fermi-level-dependent radiation are an experimental demonstration of hot plasmon emission arising from a photo-inverted carrier distribution in graphene achieved via ultrafast optical excitation. Our calculations indicate that the reported plasmon emission process can be several orders of magnitude brighter than Planckian emission mechanisms in the mid-infrared spectral range. Both the use of gold nanodisks to promote scattering and localized plasmon excitation and polarization-dependent excitation measurements provide further evidence for bright hot plasmon emission. These findings define an approach for future work on ultrafast and ultrabright graphene emission processes and mid-infrared light source applications.
RESUMO
We report the design, fabrication, and characterization of ultralight coatings that employ Salisbury screen principles and the unique nature of ITO to achieve frequency selective broadband emissivity. Our coating comprises 60 nm SiO2, 10 nm ITO, 2.3 µm NeXolv LaRC CP1 polyimide and 300 nm Ag, and achieves an aerial mass of 4.07 gm-2. It has a calculated and measured visible spectrum reflectivity of R = 0.893 and R = 0.896 respectively when weighted against AM0 from 300 nm to 1800nm; and a calculated and measured IR spectrum emissivity of e = 0.574 and e = 0.554 weighted against a 300 K blackbody respectively. This simple coating design, fabricated on the centimeter scale, achieves broadband frequency selectivity, with the highest reported thermal performance for an ultralight sun-facing radiative energy management structure.
RESUMO
We report spectrally selective visible wavelength reflectors using hydrogenated amorphous silicon carbide (a-SiC:H) as a high index contrast material. Beyond 610nm and through the near infrared spectrum, a-SiC:H exhibits very low loss and exhibits an wavelength averaged index of refraction of n = 3.1. Here we design, fabricate, and characterize such visible reflectors using a hexagonal array of a-SiC:H nanopillars as wavelength-selective mirrors with a stop-band of approximately 40 nm full-width at half maximum. The fabricated high contrast grating exhibits reflectivity R >94% at a resonance wavelength of 642nm with a single layer of a-SiC:H nanopillars. The resonance wavelength is tunable by adjusting the geometrical parameters of the a-SiC:H nanopillar array, and we observe a stop-band spectral center shift from 635 nm up to 642 nm. High contrast gratings formed from a-SiC:H nanopillars are a promising platform for various visible wavelength nanophotonics applications.
RESUMO
Two-dimensional transition metal dichalcogenides are promising candidates for ultrathin light modulators due to their highly tunable excitonic resonances at visible and near-infrared wavelengths. At cryogenic temperatures, large excitonic reflectivity in monolayer molybdenum diselenide (MoSe2) has been shown, but the permittivity and index modulation have not been studied. Here, we demonstrate large gate-tunability of complex refractive index in monolayer MoSe2 by Fermi level modulation and study the doping dependence of the A and B excitonic resonances for temperatures between 4 and 150 K. By tuning the charge density, we observe both temperature- and carrier-dependent epsilon-near-zero response in the permittivity and transition from metallic to dielectric near the A exciton energy. We attribute the dynamic control of the refractive index to the interplay between radiative and non-radiative decay channels that are tuned upon gating. Our results suggest the potential of monolayer MoSe2 as an active material for emerging photonics applications.
Assuntos
Molibdênio , Elementos de Transição , Óptica e Fotônica , Refratometria , TemperaturaRESUMO
Interlayer excitons in heterobilayers of transition-metal dichalcogenides (TMDCs) have generated enormous interest due to their permanent vertical dipole moments and long lifetimes. However, the effects of mechanical strain on the optoelectronic properties of interlayer excitons in heterobilayers remain relatively uncharacterized. Here, we experimentally demonstrate strain tuning of Γ-K interlayer excitons in molybdenum disulfide and tungsten diselenide (MoS2/WSe2) wrinkled heterobilayers and obtain a deformation potential constant of â¼107 meV/% uniaxial strain, which is approximately twice that of the intralayer excitons in the constituent monolayers. We further observe a nonmonotonic dependence of the interlayer exciton photoluminescence intensity with strain, which we interpret as being due to the sensitivity of the Γ point to band hybridization arising from the competition between in-plane strain and out-of-plane interlayer coupling. Strain engineering with interlayer excitons in TMDC heterobilayers offers higher strain tunability and new degrees of freedom compared to their monolayer counterparts.
RESUMO
Engineering of the dispersion properties of a photonic crystal (PhC) opens a new paradigm for the design and function of PhC devices. Exploiting the dispersion properties of PhCs allows control over wave propagation within a PhC. We describe the design, fabrication, and experimental observation of photonic bands for 3D PhCs capable of negative refraction in the mid-infrared. Band structure and equifrequency contours were calculated to inform the design of 3D polymer-germanium core-shell PhCs, which were fabricated using two-photon lithography direct laser writing and sputtering. We successfully characterized a polymer-Ge core-shell lattice and mapped its band structure, which we then used to calculate the PhC refraction behavior. An analysis of wave propagation revealed that this 3D core-shell PhC refracts light negatively and possesses an effective negative index of refraction in the experimentally observed region. These results suggest that architected nanolattices have the potential to serve as new optical components and devices across infrared frequencies.
RESUMO
van der Waals materials exhibit naturally passivated surfaces and an ability to form versatile heterostructures to enable an examination of carrier transport mechanisms not seen in traditional materials. Here, we report a new type of homojunction termed a "band-bending junction" whose potential landscape depends solely on the difference in thickness between the two sides of the junction. Using MoS2 on Au as a prototypical example, we find that surface potential differences can arise from the degree of vertical band bending in thin and thick regions. Furthermore, by using scanning ultrafast electron microscopy, we examine the spatiotemporal dynamics of charge carriers generated at this junction and find that lateral carrier separation is enabled by differences in the band bending in the vertical direction, which we verify with simulations. Band-bending junctions may therefore enable new optoelectronic devices that rely solely on band bending arising from thickness variations to separate charge carriers.
Assuntos
Diagnóstico por ImagemRESUMO
A fundamental understanding of hot-carrier dynamics in photo-excited metal nanostructures is needed to unlock their potential for photodetection and photocatalysis. Despite numerous studies on the ultrafast dynamics of hot electrons, so far, the temporal evolution of hot holes in metal-semiconductor heterostructures remains unknown. Here, we report ultrafast (t < 200 fs) hot-hole injection from Au nanoparticles into the valence band of p-type GaN. The removal of hot holes from below the Au Fermi level is observed to substantially alter the thermalization dynamics of hot electrons, reducing the peak electronic temperature and the electron-phonon coupling time of the Au nanoparticles. First-principles calculations reveal that hot-hole injection modifies the relaxation dynamics of hot electrons in Au nanoparticles by modulating the electronic structure of the metal on timescales commensurate with electron-electron scattering. These results advance our understanding of hot-hole dynamics in metal-semiconductor heterostructures and offer additional strategies for manipulating the dynamics of hot carriers on ultrafast timescales.
RESUMO
Color centers in hexagonal boron nitride (hBN) have emerged as promising candidates for single-photon emitters (SPEs) due to their bright emission characteristics at room temperature. In contrast to mono- and few-layeredhBN, color centers in multi-layered flakes show superior emission characteristics such as higher saturation counts and spectral stability. Here, we report a method for determining both the axial position and three-dimensional dipole orientation of SPEs in thickhBN flakes by tuning the photonic local density of states using vanadium dioxide (VO2), a phase change material. Quantum emitters under study exhibit a strong surface-normal dipole orientation, providing some insight on the atomic structure ofhBN SPEs, deeply embedded in thick crystals. Next, we optimized a hot pickup technique to reproducibly transfer thehBN flake from VO2/sapphire substrate onto SiO2/Si substrate and relocated the same emitters. Our approach serves as a practical method to systematically characterize SPEs inhBN prior to integration in quantum photonics systems.
RESUMO
We report the light-induced modification of catalytic selectivity for photoelectrochemical CO2 reduction in aqueous media using copper (Cu) nanoparticles dispersed onto p-type nickel oxide (p-NiO) photocathodes. Optical excitation of Cu nanoparticles generates hot electrons available for driving CO2 reduction on the Cu surface, while charge separation is accomplished by hot-hole injection from the Cu nanoparticles into the underlying p-NiO support. Photoelectrochemical studies demonstrate that optical excitation of plasmonic Cu/p-NiO photocathodes imparts increased selectivity for CO2 reduction over hydrogen evolution in aqueous electrolytes. Specifically, we observed that plasmon-driven CO2 reduction increased the production of carbon monoxide and formate, while simultaneously reducing the evolution of hydrogen. Our results demonstrate an optical route toward steering the selectivity of artificial photosynthetic systems with plasmon-driven photocathodes for photoelectrochemical CO2 reduction in aqueous media.
RESUMO
We describe the fabrication and use of arrays of TiO2 nanocones to yield high optical transmission into semiconductor photoelectrodes covered with high surface loadings of light-absorbing electrocatalysts. Covering over 50% of the surface of a light absorber with an array of high-refractive-index TiO2 nanocones imparted antireflective behavior (<5% reflectance) to the surface and allowed >85% transmission of broadband light to the underlying Si, even when thick metal contacts or opaque catalyst coatings were deposited on areas of the light-facing surface that were not directly beneath a nanocone. Three-dimensional full-field electromagnetic simulations for the 400-1100 nm spectral range showed that incident broadband illumination couples to multiple waveguide modes in the TiO2 nanocones, reducing interactions of the light with the metal layer. A proof-of-concept experimental demonstration of light-driven water oxidation was performed using a p+n-Si photoanode decorated with an array of TiO2 nanocones additionally having a Ni catalyst layer electrodeposited onto the areas of the p+n-Si surface left uncovered by the TiO2 nanocones. This photoanode produced a light-limited photocurrent density of â¼28 mA cm-2 under 100 mW cm-2 of simulated air mass 1.5 illumination, equivalent to the photocurrent density expected for a bare planar Si surface even though 54% of the front surface of the Si was covered by an â¼70 nm thick Ni metal layer.
RESUMO
Research on radiative cooling has attracted recent widespread interest owing to the potential for low-cost passive structures to enable large-scale thermal energy management. Using a generalized effective medium theory, we theoretically show that two-layer films comprised of SiO2 and Si3N4 nanoparticle layers on an Ag back reflector exhibit superior radiative cooling compared to single-layer or two-layer dense solid films, and can outperform other reported designs. The performance enhancement is a result of the ability to tune the nanoparticle fill fraction, which improves the spectral match between emissivity of this structure and the atmospheric transmission window. We also propose a standardized method for comparing the performance of radiative cooling structures reported by the research community.