SER-109, an Oral Microbiome Therapy for Recurrent Clostridioides difficile Infection.

BACKGROUND: Current therapies for recurrent Clostridioides difficile infection do not address the disrupted microbiome, which supports C. difficile spore germination into toxin-producing bacteria. SER-109 is an investigational microbiome therapeutic composed of purified Firmicutes spores for the treatment of recurrent C. difficile infection. METHODS: We conducted a phase 3, double-blind, randomized, placebo-controlled trial in which patients who had had three or more episodes of C. difficile infection (inclusive of the qualifying acute episode) received SER-109 or placebo (four capsules daily for 3 days) after standard-of-care antibiotic treatment. The primary efficacy objective was to show superiority of SER-109 as compared with placebo in reducing the risk of C. difficile infection recurrence up to 8 weeks after treatment. Diagnosis by toxin testing was performed at trial entry, and randomization was stratified according to age and antibiotic agent received. Analyses of safety, microbiome engraftment, and metabolites were also performed. RESULTS: Among the 281 patients screened, 182 were enrolled. The percentage of patients with recurrence of C. difficile infection was 12% in the SER-109 group and 40% in the placebo group (relative risk, 0.32; 95% confidence interval [CI], 0.18 to 0.58; P<0.001 for a relative risk of <1.0; P<0.001 for a relative risk of <0.833). SER-109 led to less frequent recurrence than placebo in analyses stratified according to age stratum (relative risk, 0.24 [95% CI, 0.07 to 0.78] for patients <65 years of age and 0.36 [95% CI, 0.18 to 0.72] for those ≥65 years) and antibiotic received (relative risk, 0.41 [95% CI, 0.22 to 0.79] with vancomycin and 0.09 [95% CI, 0.01 to 0.63] with fidaxomicin). Most adverse events were mild to moderate and were gastrointestinal in nature, with similar numbers in the two groups. SER-109 dose species were detected as early as week 1 and were associated with bile-acid profiles that are known to inhibit C. difficile spore germination. CONCLUSIONS: In patients with symptom resolution of C. difficile infection after treatment with standard-of-care antibiotics, oral administration of SER-109 was superior to placebo in reducing the risk of recurrent infection. The observed safety profile of SER-109 was similar to that of placebo. (Funded by Seres Therapeutics; ECOSPOR III ClinicalTrials.gov number, NCT03183128.).

Manufacturing Processes of a Purified Microbiome Therapeutic Reduce Risk of Transmission of Potential Bacterial Pathogens in Donor Stool.

BACKGROUND: Although fecal microbiota transplant has been used to prevent recurrent Clostridioides difficile infection (rCDI), documented pathogen transmissions highlight inherent safety risks of minimally processed stool. We describe manufacturing processes for fecal microbiota spores, live (VOWST; VOS, formerly SER-109), a microbiota-based oral therapeutic of Firmicutes spores. METHODS: Bacterial inactivation kill curves were obtained after ethanol exposure for 4 model organisms spiked into process intermediates. RESULTS: Bacterial log reduction factors ranged from 6.5 log10 to 7.4 log10 and lysis of spiked organisms occurred rapidly within 30 seconds. CONCLUSIONS: These experiments demonstrate substantial and rapid inactivation of representative organisms, supporting the potential benefit of VOS manufacturing processes to mitigate risk.

A Phase 1b Safety Study of SER-287, a Spore-Based Microbiome Therapeutic, for Active Mild to Moderate Ulcerative Colitis.

BACKGROUND & AIMS: Firmicutes bacteria produce metabolites that maintain the intestinal barrier and mucosal immunity. Firmicutes are reduced in the intestinal microbiota of patients with ulcerative colitis (UC). In a phase 1b trial of patients with UC, we evaluated the safety and efficacy of SER-287, an oral formulation of Firmicutes spores, and the effects of vancomycin preconditioning on expansion (engraftment) of SER-287 species in the colon. METHODS: We conducted a double-blind trial of SER-287 in 58 adults with active mild-to-moderate UC (modified Mayo scores 4-10, endoscopic subscores ≥1). Participants received 6 days of preconditioning with oral vancomycin (125 mg, 4 times daily) or placebo followed by 8 weeks of oral SER-287 or placebo. Patients were randomly assigned (2:3:3:3) to groups that received placebo followed by either placebo or SER-287 once weekly, or vancomycin followed by SER-287 once weekly, or SER-287 once daily. Clinical end points included safety and clinical remission (modified Mayo score ≤2; endoscopic subscores 0 or 1). Microbiome end points included SER-287 engraftment (dose species detected in stool after but not before SER-287 administration). Engraftment of SER-287 and changes in microbiome composition and associated metabolites were measured by analyses of stool specimens collected at baseline, after preconditioning, and during and 4 weeks after administration of SER-287 or placebo. RESULTS: Proportions of patients with adverse events did not differ significantly among groups. A higher proportion of patients in the vancomycin/SER-287 daily group (40%) achieved clinical remission at week 8 than patients in the placebo/placebo group (0%), placebo/SER-287 weekly group (13.3%), or vancomycin/SER-287 weekly group (17.7%) (P = .024 for vancomycin/SER-287 daily vs placebo/placebo). By day 7, higher numbers of SER-287 dose species were detected in stool samples from all SER-287 groups compared with the placebo group (P < .05), but this difference was not maintained beyond day 7 in the placebo/SER-287 weekly group. In the vancomycin groups, a greater number of dose species were detected in stool collected on day 10 and all subsequent time points through 4 weeks post dosing compared with the placebo group (P < .05). A higher number of SER-287 dose species were detected in stool samples on days 7 and 10 from subjects who received daily vs weekly SER-287 doses (P < .05). Changes in fecal microbiome composition and metabolites were associated with both vancomycin/SER-287 groups. CONCLUSIONS: In this small phase 1b trial of limited duration, the safety and tolerability of SER-287 were similar to placebo. SER-287 after vancomycin was significantly more effective than placebo for induction of remission in patients with active mild to moderate UC. Engraftment of dose species was facilitated by vancomycin preconditioning and daily dosing of SER-287. ClinicalTrials.gov ID NCT02618187.

SER-109, an Investigational Microbiome Drug to Reduce Recurrence After Clostridioides difficile Infection: Lessons Learned From a Phase 2 Trial.

BACKGROUND: Recurrent Clostridioides difficile infection (rCDI) is associated with loss of microbial diversity and microbe-derived secondary bile acids, which inhibit C. difficile germination and growth. SER-109, an investigational microbiome drug of donor-derived, purified spores, reduced recurrence in a dose-ranging, phase (P) 1 study in subjects with multiple rCDIs. METHODS: In a P2 double-blind trial, subjects with clinical resolution on standard-of-care antibiotics were stratified by age (< or ≥65 years) and randomized 2:1 to single-dose SER-109 or placebo. Subjects were diagnosed at study entry by PCR or toxin testing. Safety, C. difficile-positive diarrhea through week 8, SER-109 engraftment, and bile acid changes were assessed. RESULTS: 89 subjects enrolled (67% female; 80.9% diagnosed by PCR). rCDI rates were lower in the SER-109 arm than placebo (44.1% vs 53.3%) but did not meet statistical significance. In a preplanned analysis, rates were reduced among subjects ≥65 years (45.2% vs 80%, respectively; RR, 1.77; 95% CI, 1.11-2.81), while the <65 group showed no benefit. Early engraftment of SER-109 was associated with nonrecurrence (P < .05) and increased secondary bile acid concentrations (P < .0001). Whole-metagenomic sequencing from this study and the P1 study revealed previously unappreciated dose-dependent engraftment kinetics and confirmed an association between early engraftment and nonrecurrence. Engraftment kinetics suggest that P2 dosing was suboptimal. Adverse events were generally mild to moderate in severity. CONCLUSIONS: Early SER-109 engraftment was associated with reduced CDI recurrence and favorable safety was observed. A higher dose of SER-109 and requirements for toxin testing were implemented in the current P3 trial. CLINICAL TRIALS REGISTRATION: NCT02437487, https://clinicaltrials.gov/ct2/show/NCT02437487?term=SER-109&draw= 2&rank=4.

A Novel Microbiome Therapeutic Increases Gut Microbial Diversity and Prevents Recurrent Clostridium difficile Infection.

BACKGROUND: Patients with recurrent Clostridium difficile infection (CDI) have a ≥60% risk of relapse, as conventional therapies do not address the underlying gastrointestinal dysbiosis. This exploratory study evaluated the safety and efficacy of bacterial spores for preventing recurrent CDI. METHODS: Stool specimens from healthy donors were treated with ethanol to eliminate pathogens. The resulting spores were fractionated and encapsulated for oral delivery as SER-109. Following their response to standard-of-care antibiotics, patients in cohort 1 were treated with SER-109 on 2 consecutive days (geometric mean dose, 1.7 × 10(9) spores), and those in cohort 2 were treated on 1 day (geometric mean dose, 1.1 × 10(8) spores). The primary efficacy end point was absence of C. difficile-positive diarrhea during an 8-week follow-up period. Microbiome alterations were assessed. RESULTS: Thirty patients (median age, 66.5 years; 67% female) were enrolled, and 26 (86.7%) met the primary efficacy end point. Three patients with early, self-limiting C. difficile-positive diarrhea did not require antibiotics and tested negative for C. difficile at 8 weeks; thus, 96.7% (29 of 30) achieved clinical resolution. In parallel, gut microbiota rapidly diversified, with durable engraftment of spores and no outgrowth of non-spore-forming bacteria found after SER-109 treatment. Adverse events included mild diarrhea, abdominal pain, and nausea. CONCLUSIONS: SER-109 successfully prevented CDI and had a favorable safety profile, supporting a novel microbiome-based intervention as a potential therapy for recurrent CDI.

Randomized Placebo-Controlled, Biomarker-Stratified Phase Ib Microbiome Modulation in Melanoma: Impact of Antibiotic Preconditioning on Microbiome and Immunity.

Gut-microbiota modulation shows promise in improving immune-checkpoint blockade (ICB) response; however, precision biomarker-driven, placebo-controlled trials are lacking. We performed a multicenter, randomized placebo-controlled, biomarker-stratified phase I trial in patients with ICB-naïve metastatic melanoma using SER-401, an orally delivered Firmicutesenriched spore formulation. Fecal microbiota signatures were characterized at baseline; patients were stratified by high versus low Ruminococcaceae abundance prior to randomization to the SER-401 arm (oral vancomycin-preconditioning/SER-401 alone/nivolumab + SER-401), versus the placebo arm [placebo antibiotic/placebo microbiome modulation (PMM)/nivolumab + PMM (NCT03817125)]. Analysis of 14 accrued patients demonstrated that treatment with SER-401 + nivolumab was safe, with an overall response rate of 25% in the SER-401 arm and 67% in the placebo arm (though the study was underpowered related to poor accrual during the COVID-19 pandemic). Translational analyses demonstrated that vancomycin preconditioning was associated with the disruption of the gut microbiota and impaired immunity, with incomplete recovery at ICB administration (particularly in patients with high baseline Ruminococcaceae). These results have important implications for future microbiome modulation trials. Significance: This first-of-its-kind, placebo-controlled, randomized biomarker-driven microbiome modulation trial demonstrated that vancomycin + SER-401 and anti-PD-1 are safe in melanoma patients. Although limited by poor accrual during the pandemic, important insights were gained via translational analyses, suggesting that antibiotic preconditioning and interventional drug dosing regimens should be carefully considered when designing such trials.

Drugging the microbiome and bacterial live biotherapeutic consortium production.

Research leading to characterization, quantification, and functional attribution of the microbes throughout the human body has led to many drug-development programs. These programs aim to manipulate a patient's microbiome through the addition of new strains or functions, the subtraction of deleterious microbes, or the rebalancing of the existing population through various drug modalities. Here, we present a general overview of those modalities with a specific focus on bacterial live biotherapeutic products (LBPs). The bacterial LBP modality has unique concerns to ensure product quality, thus, topics related to manufacturing, quality control, and regulation are addressed.

Manufacturing Process of SER-109, a Purified Investigational Microbiome Therapeutic, Reduces Risk of Coronavirus Transmission From Donor Stool.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) may present risk to patients treated with donor-derived microbiome therapies when appropriate manufacturing controls and inactivation processes are lacking. We report that the manufacturing steps for SER-109, a purified investigational microbiome therapeutic developed to reduce risk of Clostridioides difficile recurrence, inactivate porcine epidemic diarrhea virus, a model coronavirus for SARS-CoV-2.

Novel micro-bioreactor high throughput technology for cell culture process development: Reproducibility and scalability assessment of fed-batch CHO cultures.

With increasing timeline pressures to get therapeutic and vaccine candidates into the clinic, resource intensive approaches such as the use of shake flasks and bench-top bioreactors may limit the design space for experimentation to yield highly productive processes. The need to conduct large numbers of experiments has resulted in the use of miniaturized high-throughput (HT) technology for process development. One such high-throughput system is the SimCell platform, a robotically driven, cell culture bioreactor system developed by BioProcessors Corp. This study describes the use of the SimCell micro-bioreactor technology for fed-batch cultivation of a GS-CHO transfectant expressing a model IgG4 monoclonal antibody. Cultivations were conducted in gas-permeable chambers based on a micro-fluidic design, with six micro-bioreactors (MBs) per micro-bioreactor array (MBA). Online, non-invasive measurement of total cell density, pH and dissolved oxygen (DO) was performed. One hundred fourteen parallel MBs (19 MBAs) were employed to examine process reproducibility and scalability at shake flask, 3- and 100-L bioreactor scales. The results of the study demonstrate that the SimCell platform operated under fed-batch conditions could support viable cell concentrations up to least 12 x 10(6) cells/mL. In addition, both intra-MB (MB to MB) as well as intra-MBA (MBA to MBA) culture performance was found to be highly reproducible. The intra-MB and -MBA variability was calculated for each measurement as the coefficient of variation defined as CV (%) = (standard deviation/mean) x 100. The % CV values for most intra-MB and intra-MBA measurements were generally under 10% and the intra-MBA values were slightly lower than those for intra-MB. Cell growth, process parameters, metabolic and protein titer profiles were also compared to those from shake flask, bench-top, and pilot scale bioreactor cultivations and found to be within +/-20% of the historical averages.

Establishment of higher passage PER.C6 cells for adenovirus manufacture.

PER.C6 cells, an industrially relevant cell line for adenovirus manufacture, were extensively passaged in serum-free suspension cell culture to better adapt them to process conditions. The changes in cell physiology that occurred during this passaging were characterized by investigating cell growth, cell size, metabolism, and cultivation of replication-deficient adenovirus. The changes in cell physiology occurred gradually as the population doubling level, the number of times the cell population had doubled, increased. Higher passage PER.C6 (HP PER.C6) proliferated at a specific growth rate of 0.043 h(-1), 2-fold faster than lower passage PER.C6, and were capable of proliferation from lower inoculation cell densities. HP PER.C6 cell volume was 16% greater, and cellular yields on glucose, lactate, oxygen, and amino acids were greater as well. In batch cultures, HP PER.C6 cells volumetrically produced 3-fold more adenovirus, confirmed with three different constructs. The increase in productivity was also seen on a cell-specific basis. Although HP PER.C6 were more sensitive to the "cell density effect", requiring lower infection cell densities for optimal specific productivity, they proliferated more after infection than lower passage PER.C6, increasing the number of cells available for virus production. The extensive passaging established HP PER.C6 cells with several desirable attributes for adenovirus manufacture.

Scaleable production of adenoviral vectors by transfection of adherent PER.C6 cells.

Recombinant adenoviruses are efficient gene delivery vectors that are being evaluated in many gene therapy and vaccine applications. Methods for rapid production of ca. 10(12)-10(13) virus particles (VPs) are desired to enable rapid initial evaluation of such vectors. For this purpose, a scalable transfection procedure was developed for production of an adenovirus type 5 vector expressing HIV-1 gag gene (MRKAd5gag). Adherent PER.C6 cells were transfected by calcium phosphate coprecipitation of the linearized, 36 kb adenovirus plasmid in disposable culture vessels. Various process variables including precipitate formation time, DNA concentration, and harvest time were investigated to rapidly achieve desired virus yields using an adenovirus plasmid encoding the green fluorescent protein (pAd5gfp). Using an optimized procedure, consistent production of >5 x 10(10) VPs per 1-tray Nunc cell factory (NCF) with a ratio of infectious units to virus particles of >1:10 was obtained for the MRKAd5gag vector. This scaleable process can be used to produce adenoviral vectors using several 1-tray NCFs or a single multiple-tray NCF within 1 month from the time of plasmid construction.

Comparative analysis of the effects of packaging signal, transgene orientation, promoters, polyadenylation signals, and E3 region on growth properties of first-generation adenoviruses.

First-generation adenovectors have been developed for gene therapy and vaccine applications. The construction of these adenovectors has entailed the use of numerous types of expression cassettes. It has long been known that first-generation adenovectors can be rescued more easily and to higher titers with some transgenes than with others. This study has systematically shown that there can be marked differences in growth properties of recombinant adenovectors attributable to the use of promoters, the orientation of the transgene within the E1A/E1B-deleted region, and the inclusion of the E3 region. In addition, we had demonstrated the benefit of extending the packaging signal region to include elements V, VI, and VII. The effects of the complete packaging region were studied by plasmid competition studies between original and modified adenovectors. Similar competition studies between E3(+) and E3(-) adenovectors were performed and showed that the E3(+) vector had a growth advantage over its E3(-) counterpart. By making various changes, we have enhanced the growth capacity of our recombinant adenovector by more than 3-fold under serum-free and cell suspension growth conditions. Along with this enhanced growth, our adenovectors have maintained their genetic stability after 21 successive passages in cell culture. This increased robustness will be critical when adapting first-generation recombinant adenovectors to commercial production.

Quantitative studies of cell-bubble interactions and cell damage at different pluronic F-68 and cell concentrations.

Pluronic F-68 (PF-68) is routinely used as a shear-protection additive in mammalian cell cultures. However, most previous studies of its shear protection mechanisms have typically been qualitative in nature and have not covered a wide range of PF-68 and cell concentrations. In this study, interactions between air bubbles along with the associated cell damage were investigated using the novel adenovirus-producing cell line PER.C6, a human embryonic retinoblast transfected with the adenovirus type 5 E1 gene. A wide range of PF-68 and cell concentrations (approximately 3 orders of magnitude) were used in these studies. At low PF-68 concentrations (0.001 g/L), cells had a very high affinity for bubbles, indicated by a more than 10-fold increase in cell concentration in the foam layer liquid versus the bulk liquid. At high PF-68 concentrations ( approximately 3 g/L), however, the cell concentration in the foam layer liquid was only approximately 40% of that in the bulk cell suspension. The number of cells associated with each bubble decreased from approximately 1000 cells at 0.001 g/L PF-68 to approximately 120 cells at 3 g/L PF-68. Despite the lower cell affinity for bubbles at a high PF-68 concentration, at high cell concentrations (10(7) cells/mL and 1 g/L PF-68) significant cell entrapment occurred in the foam layer, on the order of 1000 cells/bubble. For the cells carried by the bubbles, quantitative cell damage data revealed that the probability of cell death from bubble rupture was independent of bulk cell concentration but was affected by PF-68 concentration. These quantitative studies further indicated that even at a low PF-68 concentration of 0.03 g/L, approximately 30% of the attached cells were killed during the bubble rupture process. At the same time, at low PF-68 concentration (<0.1 g/L), significant cell death occurred prior to bubble rupture. On average, a bubble disrupted more cells in the bulk liquid and/or foam layer than during rupture. For both mechanisms, the number of cells damaged by each bubble increased with decreasing PF-68 concentration and increasing bulk cell concentration.

Fluid mechanics, cell distribution, and environment in CellCube bioreactors.

Cultivation of MRC-5 cells and attenuated hepatitis A virus (HAV) for the production of VAQTA, an inactivated HAV vaccine (1), is performed in the CellCube reactor, a laminar flow fixed-bed bioreactor with an unusual diamond-shaped, diverging-converging flow geometry. These disposable bioreactors have found some popularity for the production of cells and gene therapy vectors at intermediate scales of operation (2, 3). Early testing of the CellCube revealed that the fluid mechanical environment played a significant role in nonuniform cell distribution patterns generated during the cell growth phase. Specifically, the reactor geometry and manufacturing artifacts, in combination with certain inoculum practices and circulation flow rates, can create cell growth behavior that is not simply explained. Via experimentation and computational fluid dynamics simulations we can account for practically all of the observed cell growth behavior, which appears to be due to a complex mixture of flow distribution, particle deposition under gravity, fluid shear, and possibly nutritional microenvironment.

293 cell cycle synchronisation adenovirus vector production.

As the market requirements for adenovirus vectors (AdV) increase, the maximization of the virus titer per culture volume per unit time is a key requirement. However, despite the fact that 293 cells can grow up to 8 x 10(6) cell/mL in simple batch mode operations, for optimal AdV infection a maximum cell density of 1 x 10(6) cell/mL at infection time has usually been utilized due to the so called "cell density effect". In addition, AdV titer appears to be dependent upon cell cycle phase at the time of infection. To evaluate the dependence of AdV production upon cell cycle phase, 293 cells were chemically synchronized at each phase of the cell cycle; a 2.6-fold increase on AdV cell specific titer was obtained when the percentage of cells at the S phase of the cell cycle was increased from 36 to 47%; a mathematical equation was used to relate AdV cell specific productivities with cell synchronisation at the S phase using this data. To avoid the use of chemical inhibitors, a temperature shift strategy was also used for synchronisation at the S phase. S phase synchronisation was obtained by decreasing the culture temperature to 31 degrees C during 67 h and restoring it to 37 degrees C during 72 h. By using this strategy we were able to synchronize 57% of the population in the S phase of the cell cycle obtaining an increase of 7.3-fold on AdV cell specific titer after infection.

Characterization of changes in PER.C6 cellular metabolism during growth and propagation of a replication-deficient adenovirus vector.

PER.C6 cells were cultivated for propagation of a replication-defective adenovirus vector in serum-free suspension bioreactors. Cellular metabolism during cell growth and adenovirus propagation was fully characterized using on-line and off-line methods. The energy metabolism was found to accelerate transiently after adenovirus infection with increases in glucose and oxygen consumption rates. Similar to other mammalian cells, glucose utilization was highly inefficient and a high lactate:glucose yield was observed, both before and after virus infection. A higher consumption of most of the essential amino acids was observed transiently after the infection, likely due to increased protein synthesis requirements for virus propagation. To improve virus propagation, a medium exchange strategy was implemented to increase PER.C6 cell concentration for infection. During cell growth, a 50% increase in glucose consumption and lactate production rates was observed after initiation of the medium exchange in comparison to the batch phase. This decrease in medium capacity only affected the central carbon metabolism and no increase in amino acid consumption was observed. In addition, even though cell concentrations of up to 10 x 10(6) cells/mL were reproducibly obtained by medium exchange, infections at cell concentrations higher than 1 x 10(6) cells/mL did not proportionally improve volumetric adenovirus productivities. No measured nutrient limitation was observed at those high cell concentrations, indicating that adenovirus cell-specific productivity at higher cell concentrations is highly dependent on cell physiology. These results provide a better understanding of PER.C6 cellular metabolism and a basis for intensifying PER.C6 growth and adenovirus propagation.

Production and formulation of adenovirus vectors.

Adenovirus vectors have attracted considerable interest over the past decade, with ongoing clinical development programs for applications ranging from replacement therapy for protein deficiencies to cancer therapeutics to prophylactic vaccines. Consequently, considerable product, process, analytical, and formulation development has been undertaken to support these programs. For example, "gutless" vectors have been developed in order to improve gene transfer capacity and durability of expression; new cell lines have been developed to minimize recombination events; production conditions have been optimized to improve volumetric productivities; analytical techniques and scaleable purification processes have advanced towards the goal of purified adenovirus becoming a "well-characterized biological"; and liquid formulations have been developed which maintain virus infectivity at 2-8 degrees C for over 18 months. These and other advances in the production of adenovirus vectors are discussed in detail in this review. In addition, the needs for the next decade are highlighted.

Production of core and virus-like particles with baculovirus infected insect cells.

In this paper the fundamental aspects of process development for the production of core and virus-like particles with baculovirus infected insect cells are reviewed. The issues addressed include: particle formation and monomer composition, chemical and physical conditions for optimal cell growth, baculovirus replication and product expression, multiplicity of infection strategy, and scale-up of the process. Study of the differences in the metabolic requirements of infected and non-infected cells is necessary for high cell density processes. In the bioreactor, the specific oxygen uptake rate (OURsp) plays a central role in process scale-up, leading to the specification of the bioreactor operational parameters. Shear stress can also be an important variable for bioreactor operation due to its influence on cell growth and product expression. The determination of the critical variables in process development is discussed, showing the relevance of the mathematical models that have been developed for the insect cells/baculovirus system in process implementation and control.