Single-step dynamic dewatering of microalgae from dilute suspensions using flocculant assisted filtration.

BACKGROUND: Dewatering constitutes a major challenge to the production of microalgae, accounting for 20-30% of the product cost. This presents a setback for the applicability of microalgae in the development of several sustainable products. This study presents an investigation into the dynamic dewatering of microalgae in a combined flocculation-filtration process. The effect of process conditions on the performance of 12 flocculants and their mixtures was assessed. RESULTS: The mechanism of flocculation via the electrostatic path was dominated by charge neutralization and subsequently followed bridging in a 'sweep flocculation' process. Cationic polyacrylamide (CPAM) based flocculants recorded the highest biomass retention with PAM1 and PAM2 attaining 99 and 98% retention with flocculant dosages of 10 and 15 mg/L respectively. Polyvinylamine (PVAM) was also found to improve system stability across the pH range 4-10. Alum was observed to be only effective in charge neutralization, bringing the system close to its isoelectric point (IEP). Chemometric analysis using the multi-criteria decision methods, PROMETHEE and GAIA, was applied to provide a sequential performance ranking based on the net outranking flow (ф) from 207 observations. A graphical exploration of the flocculant performance pattern, grouping the observations into clusters in relation to the decision axis ([Formula: see text]), which indicated the weighted resultant of most favorable performance for all criteria was explored. CONCLUSION: CPAM based flocculants and their mixtures demonstrated superior performance due to their viscoelastic behaviour under turbulence. The use of PVAM or alum in mixtures with CPAM reduced the required doses of both flocculants, which will provide beneficial financial impact for largescale microalgae dewatering in a flocculant assisted dynamic filtration process. Chemometric analysis based on the physico-chemical properties of the system provides a time saving assessment of performance across several criteria. The study findings provide an important foundation for flocculant assisted dynamic filtration processes.

Rapid and selective detection of recombinant human erythropoietin in human blood plasma by a sensitive optical sensor.

Recombinant human erythropoietin (rHuEPO) is an important hormone drug that is used to treat several medical conditions. It is also frequently abused by athletes as a performance enhancing agent at sporting events. The time window of the rHuEPO in blood is short. Therefore, the rapid detection of rHuEPO use/abuse at points of care and in sports requires a selective analytical method and a sensitive sensor. Herein, we present a highly selective method for the rapid detection of rHuEPO in human blood plasma by a sensitive optical sensor. rHuEPO is selectively extracted from human blood plasma by a target-specific extractor chip and converted into a biothiol by reducing its disulfide bond structure. The formed biothiol reacts with a water soluble (E)-1-((6-methoxybenzo[d]thiazole-2-yl)diazenyl)naphthalene-2,6-diolHg(ii) (BAN-Hg) optical sensor and causes its rapid decomposition. This leads to a rapid change in the sensor color from blue to pink that can be observed by the naked eye. The optical sensor was used to quantify rHuEPO in the concentration range 1 × 10-8 M to 1 × 10-12 M by UV-Vis spectroscopy. For the screening of blood plasma, an EPO-specific extractor chip was synthesized and used to selectively extract the protein from the biological matrix prior to its conversion into biothiol and quantification by the optical sensor. Since many proteins have a disulfide bond structure, the new method has strong potential for their rapid sensitive and selective detection by the BAN-Hg sensor and UV-Vis spectroscopy.

Application of multivariate data techniques in photochemical study of polycyclic aromatic hydrocarbons (PAHs) and transformed PAH products in road dust.

Road dust is a key repository for PAHs and transformed PAH products (TPPs) generated from natural and anthropogenic sources in the urban environment. Eventhough PAHs and TPPs are prone to post-emission photochemical processes, very limited studies exist on the subject for road dust. This knowledge gap is of particular concern since some of the resultant TPPs are notably more carcinogenic than their precursor PAHs. This study evaluated the role of 254 nm ultraviolet (UV) photons on the photochemistry of PAHs and TPPs in road dust. The findings show that UV irradiation had varying effects on the fate of analytes, particularly naphthalene (NAP), phenanthrene (PHE), 7, 12-dimethylbenz(a)anthracene (DMBA), 1-hydroxypyrene (HPY), 1-nitropyrene (1NPY), pyrene (PYR) and 5-nitroacenaphthene (5NAC). Photochemical relationship was identified between PYR, 1NPY and HPY, and DMBA and benzo(a)anthracene. Unlike carbonyl-PAHs, parent PAHs, nitro-PAHs and hydroxy-PAHs can originate from photolysis. Photon irradiation durations of 3, 6 and 7.5 h had the most intense influence on the photolytic process with 7.5 h as optimum. The photochemical rate at optimum irradiation duration shows an increasing trend of NAP < PHE < 1NPY < DMBA < 5NAC < HPY with respective estimates of 0.08, 0.11, 0.21, 0.22, 0.43, and 0.59 mg kg-1 hr-1. Physicochemical properties of analytes such as index of refraction and vapour pressure (in logarithmic form) had an inverse effect on photolysis. The knowledge generated is significant for the in-depth understanding of the fate of PAHs and TPPs on urban road surfaces and contributes to the greater protection of human health and the environment.

Dual chemosensor for the rapid detection of mercury(ii) pollution and biothiols.

A new benzothiazole azo dye [(E)-1-((6-methoxybenzo[d]thiazole-2-yl)diazenyl)naphthalene-2,6-diol] (also known as "BAN"), has been synthesised and used as a chemosensor for the rapid and selective detection of mercury(ii) ions in water. The pink coloured chemosensor turns blue when reacted with mercury(ii) ions due to the formation of a 2 : 1 coordination complex. The complex formation causes a bathochromic shift of the chemosensor's UV absorption peak from 540 to 585 nm and turns on a highly selective fluorescence emission at 425 nm. The change in the optical property of BAN upon complexation with mercury(ii) was confirmed by ab initio calculations. The new chemosensor was used to quantify mercury(ii) ions in water by fluorescence spectroscopy down to 5 × 10-8 M (10 ppb). The limit of detection (LOD) of Hg2+ was 9.45 nM (1.8 ppb) which satisfies the maximum allowable Hg2+ concentration in drinking water that is set by the WHO. The BAN-Hg(ii) complex was used for the determination of cysteine (Cys) in aqueous solution by UV-Vis spectroscopy down to 1 × 10-7 M. The thiol-containing amino acid preferentially coordinates the mercury ions of the BAN-Hg(ii) complex. This causes dissociation of the blue-coloured complex and the liberation of the pink-coloured BAN dye. The colour change of the BAN-Hg(ii) complex from blue to pink was selective to the Cys biothiol while other non-thiol containing amino acids did not cause a colour change. For the in-field application, filter paper strips were loaded with the BAN-Hg(ii) complex and used as a disposable sensor for the detection of cysteine (Cys) by the naked eye. Therefore, the BAN chemosensor offers a sensitive, and rapid tool for the detection of mercury(ii) in water. In addition, the BAN-Hg(ii) complex can be used as a simple and selective chemosensor of the screening of purified biothiols, such cysetine, homocysteine and glutathione in biology research and pharmaceutical/food industries.

Preconcentration and SERS-based determination of infliximab in blood by using a TNF-α-modified gold-coated copper oxide nanomaterial.

Infliximab (INF) is a chimeric monoclonal immunoglobulin acting against tumor necrosis factor-alpha (TNF-α). The drug is used for the treatment of chronic autoimmune and inflammatory diseases. A target-specific nanomaterial is presented for the extraction of INF from human plasma along with a label-free surface enhanced Raman spectroscopy (SERS) method for its determination using a handheld device. A gold-coated copper oxide chip was functionalized with TNF-α and used to extract the drug from plasma. INF was recovered from the extractor by lowering the pH value to 2.5. The disulfide bond structure of the drug was then reduced and used for its oriented chemisorption onto a gold-coated copper oxide substrate for SERS measurements using the INF-specific band at 936 cm-1. The working range of the SERS method was between 10-7 and 10-14 M of reduced INF. The relative standard deviation (RSD), between three different measurements was 4.2% (intra-day) and 7.1% (inter-day). The quantification and detection limits of the assay (LOQ, LOD) were 0.01 pM and 1.4 fM respectively. The SERS detection was cross-validated against ELISA where 99% agreement was found between the two methods. Graphical abstractSchematic representation of the determination of Infliximab (INF) in blood. A gold coated copper oxide chip was functionalised with tumor necrosis factor (TNF-α) and used to extract INF from blood plasma. The captured INF was released, reduced, chemisorbed onto a second gold-coated copper oxide substrate and screened by surface-enhanced Raman spectroscopy (SERS) using a handheld device.

Contamination impact and human health risk assessment of heavy metals in surface soils from selected major mining areas in Ghana.

Analysis of soil samples around pristine and major gold-mining areas in Ghana was carried out for heavy metals as part of a larger soil contamination and metal background study. The surface soil samples were digested using microwave digester (aqua regia) and analyzed with ICP-MS for As, Cd, Hg, Zn, Co, Cu, Mn, Fe, Al, V, Cr, and Pb. The average concentrations (mg/L) for the metals ranged from 0.01 ± 0.01 (Cd) to 86,859.36 ± 47.07 (Fe) for the pristine sites, and 0.01 ± 0.01 (Cd) to 59,006.95 ± 79.06 (Fe) for the mining sites. Mercury was below the detection limit of the analytical instrument (0.029). The concentrations of heavy metals from this study were used to assess their contamination levels, and health risks. The results showed that, the metals ranked by severity of health risks as As > Pb > Cr > Cd. Principal component analysis (PCA) and cluster analysis showed two groupings with the PCA showing metals variability explained by 79.02%. Results from the PCA and Cluster analysis indicate anthropogenic sources of the metals which may be emanating from gold-mining activities. Results from multi-criteria ranking and pattern recognition employing PROMETHEE and GAIA revealed major contribution of the metals from the mining sites with metal variability explained by 72.83%. This is the first time a multi-criteria approach is employed to characterize heavy metal contamination in Ghana, and the study nevertheless brought to light the impact of mining on human health and the environment with implications for other mineral areas around the globe.

Role of adsorption behavior on metal build-up in urban road dust.

Metal pollution of stormwater runoff can cause potential toxic impacts on the receiving water environment and human health. Effective pollution mitigation requires accurate stormwater quality modeling. Even though a significant knowledge base exists on the factors influencing metal build-up on urban roads, very limited studies have investigated how metal-particulate interaction influences metal build-up. This study quantitatively assessed the influence of particulate characteristics, together with vehicular traffic and land use, on the build-up of Zn, Cu, Pb, Cr, Ni and Cd on urban roads. The study outcomes revealed that the variability in metal build-up is highly influenced by the variability associated with metal adsorption to particulates. The percentage contribution from particulate properties influencing metal adsorption in the case of <150 µm size road dust particles was found to be higher (Zn 44%, Cu 52%, Cr 16%, Ni 27% and Cd 45%) when compared to traffic and land use characteristics (Zn 21%, Cu 13%, Cr and Ni <10% and Cd 34%). Similar adsorption behavior was noted for metals associated with >150 µm size road dust particles. Among different particulate properties influencing metal adsorption, effective cation exchange capacity showed a strong positive relationship with the build-up of Cd compared to other metals, highlighting the potential role of Cd in stormwater quality as a readily available metal. The build-up of metals such as Cr and Ni are highly influenced by metal oxides of Al, Fe and Mn and clay forming minerals, indicating that Cr and Ni are relatively stable in nature.

Plasmonic Switching of the Reaction Pathway: Visible-Light Irradiation Varies the Reactant Concentration at the Solid-Solution Interface of a Gold-Cobalt Catalyst.

Product selectivity of alkyne hydroamination over catalytic Au2 Co alloy nanoparticles (NPs) can be made switchable by a light-on/light-off process, yielding imine (cross-coupling product of aniline and alkyne) under visible-light irradiation, but 1,4-diphenylbutadiyne in the dark. The low-flux light irradiation concentrates aniline on the catalyst, accelerating the catalytic cross-coupling by several orders of magnitude even at a very low overall aniline concentrations (1.0×10-3  mol L-1 ). A tentative mechanism is that Au2 Co NPs absorb light, generating an intense fringing electromagnetic field and hot electrons. The sharp field-gradient (plasmonic optical force) can selectively enhance adsorption of light-polarizable aniline molecules on the catalyst. The light irradiation thereby alters the aniline/alkyne ratio at the NPs surface, switching product selectivity. This represents a new paradigm to modify a catalysis process by light.

Spectroelectrochemical Nanosensor for the Determination of Cystatin C in Human Blood.

The detection of protein biomarkers for the clinical diagnosis of diseases requires selective and sensitive methodologies and biosensors that can be easily used at pathology laboratories and points of care. An ideal methodology would be able to conduct multimode screening of low and high concentrations of proteins in biological fluids using recyclable platforms. In this work, we demonstrate a novel nanosensing methodology for the dual detection of cystatin C (CST-C), as a protein biomarker model, in blood plasma by surface-enhanced Raman spectroscopy and electrochemistry. The new methodology utilizes the thiol chemistry of biomolecules to develop a target-specific and recyclable extractor chip for the rapid isolation of protein biomarkers from blood plasma. This is followed by the rapid reduction of the disulfide bonds within the isolated protein to influence its oriented immobilization onto a conductive gold coated silicon nanopillar substrate via stable gold-sulfur (Au-S) bonds. The oriented immobilization led to reproducible surface-enhanced Raman spectroscopy (SERS) measurements of the reduced protein (RSD = 3.8%) and allowed for its direct electrochemical determination. After the SERS measurement, differential pulse voltammetry (DPV) was used to desorb the analyte from the substrate and generate a reduction current that is proportional to its concentration. CST-C was determined down to 1 pM and 62.5 nM by SERS and DPV, respectively, which satisfies the requirements for monitoring Alzheimer's and kidney failure diseases. The new dual nanosensing methodology has strong potential for miniaturization in a lab-on-a-chip platform for the screening of many protein biomarkers that have a disulfide bond structure.

Role of residence time on the transformation of Zn, Cu, Pb and Cd attached to road dust in different land uses.

The adsorption behaviour of metals deposited on road surfaces undergo changes during dry weather periods, with the bioavailability varying compared to the original species, prior to incorporation in stormwater runoff. This study investigated the role of antecedent dry days on the transformation characteristics of Zn, Cu, Pb and Cd attached to different geochemical forms of road dust, in order to predict potential stormwater quality impacts. The study outcomes showed that the exchangeable fraction generally decreased with the increase in antecedent dry days, but the reducible, oxidisable and residual fractions increased. This implies that there is a time-dependent transformation of weakly bound metals in road dust to more persistent chemical forms. The transformation rate of metals was found to be in the order of Pb > Cu > Zn > Cd. Significant changes in metal distribution among the geochemical fractions were observed up to seven dry days, suggesting that during the initial antecedent dry days, the transformations can be relatively more significant. Among the analysed metals, Cd present on road surfaces has a higher potential for being bioavailable during the antecedent dry days.

Heavy metals transport pathways: The importance of atmospheric pollution contributing to stormwater pollution.

Pollution has become a serious issue in the urban water environment as stormwater runoff transports a range of pollutants to receiving water bodies, undermining water quality and posing human and ecosystem health risks. Commonly, the primary focus of stormwater quality research is on the role of pollutants directly accumulating at the ground phase. However, atmospheric phase can also exert a significant impact on stormwater quality through atmospheric deposition. Unfortunately, only limited research has focused on the linkage between atmospheric and ground phases in relation to urban stormwater quality. The study discussed in this paper characterised the four primary transport pathways, atmospheric build-up (AB), atmospheric deposition (AD) and road surface build-up (BU) and wash-off (WO) in relation to heavy metals, which is a key urban stormwater pollutant. The research outcomes confirmed the direct linkage between atmospheric phase and ground phase and in turn the significance of atmospheric heavy metals as a contributing source to stormwater runoff pollution. Zn was the most dominant heavy metal in all four pathways. For the AB pathway, atmospheric heavy metal pollution on weekdays is more serious than weekends. For the AD pathway, dry atmospheric deposition of heavy metals is positively correlated to dry days, whilst wet (bulk) deposition is related to rainfall depth. For the BU pathway, heavy-duty vehicle traffic volume was found to be the most important source. For the WO pathway, industrial and commercial areas tend to produce higher heavy metal concentrations in stormwater runoff than residential areas. The study results will contribute to the creation of effective urban stormwater pollution mitigation strategies and thereby enhancing the quality of the urban water environment.

Multivariate linear regression model for source apportionment and health risk assessment of heavy metals from different environmental media.

The study evaluated source apportionment of heavy metals in vegetable samples from the potential sources of fertilizer, water and soil samples collected along the Changjiang River delta in China. The results showed that 25.72% of vegetable samples (Brassica chinensis L.) containing Pb, and Cd, Cu, Hg and Zn at relatively serious levels were from soil. Combined with principle component analysis (PCA) and cluster analysis (CA), the results of the spatial distribution of heavy metals in different environmental media indicated that fertilizer, water and soil were the main sources of heavy metals in vegetables. The results of multivariate linear regression (MLR) using partition indexes (P) showed that fertilizer contributed to 38.5%, 40.56%, 46.01%, 53.34% and 65.25% of As, Cd, Cu, Pb and Zn contents in vegetables, respectively. In contrast, 44.58% of As, 32.57% of Hg and 32.83% of Pb in vegetables came from soil and 42.78% of Cd and 66.97% of Hg contents in vegetables came from the irrigation water. The results of PCA and CA verified that MLR using P was suitable for determining source apportionment in a vegetable. A health risk assessment was performed; As, Cd and Pb contributed to more than 75% of the total hazard quotient (THQ) values and total carcinogenic risk values (Risktotal) for adults and children through oral ingestion. More than 70% of the estimated THQ and Risktotal is contributed by water and fertilizer. Therefore, it is necessary to increase efforts in screening limits/levels of heavy metals in fertilizer and irrigation water and prioritize appropriate pollution management strategies.

Assessment of contamination and health risk of heavy metals in selected water bodies around gold mining areas in Ghana.

Heavy metal contamination of selected rivers in Ghana was studied as part of a bigger project aimed at setting background standard for heavy metals in the Ghanaian environment. Water samples were collected from major mining and eight pristine areas. The samples were acid digested with aqua-regia and analyzed with ICP-MS for As, Cd, Hg, Zn, Cu, Mn, Fe, Cr, Al, V, Co, Ni, and Pb. The average concentrations (mg/L) from the pristine sites ranged from 0.002 ± 0.00(As) to 0.929 ± 0.06 (Fe) and 0.002 ± 0.00 (Pb) to 20.355 ± 5.60 (Fe) from the mining sites. With the exception of Al, Fe, and Mn, the metals level were found to be within the WHO and USEPA guideline limits. Hazard quotients (HQ) for ingestion and dermal contact for pristine and mining samples ranged from 3.00E-04 (Cu) to 0.84 (Cr) and 2.40E-06 (Cu) to 7.44 (As), respectively. The carcinogenic risk (CR) for ingestion and dermal contact ranged from 5.03E-06 to 1.71E-07 (Cr) and 4.22E-08 to 1.44E-09 (Cr), respectively. Arsenic showed a CR value higher than the acceptable limit (1.8E-02) from the mining sites which poses carcinogenic health threat. Multicriteria ranking suggests Birim river (EAM) as the most contaminated. The pattern recognition and multicriteria approach in characterizing the heavy metal contamination (for the first time in the case of Ghana) from the various sites will provide fresh insights into the risk assessment of heavy metals in contaminated surface waters.

Reproducible and label-free biosensor for the selective extraction and rapid detection of proteins in biological fluids.

Erythropoietin (EPO), a glycoprotein hormone of ∼ 34 kDa, is an important hematopoietic growth factor, mainly produced in the kidney and controls the number of red blood cells circulating in the blood stream. Sensitive and rapid recombinant human EPO (rHuEPO) detection tools that improve on the current laborious EPO detection techniques are in high demand for both clinical and sports industry. A sensitive aptamer-functionalized biosensor (aptasensor) has been developed by controlled growth of gold nanostructures (AuNS) over a gold substrate (pAu/AuNS). The aptasensor selectively binds to rHuEPO and, therefore, was used to extract and detect the drug from horse plasma by surface enhanced Raman spectroscopy (SERS). Due to the nanogap separation between the nanostructures, the high population and distribution of hot spots on the pAu/AuNS substrate surface, strong signal enhancement was acquired. By using wide area illumination (WAI) setting for the Raman detection, a low RSD of 4.92% over 150 SERS measurements was achieved. The significant reproducibility of the new biosensor addresses the serious problem of SERS signal inconsistency that hampers the use of the technique in the field. The WAI setting is compatible with handheld Raman devices. Therefore, the new aptasensor can be used for the selective extraction of rHuEPO from biological fluids and subsequently screened with handheld Raman spectrometer for SERS based in-field protein detection.

Development of a hybrid pollution index for heavy metals in marine and estuarine sediments.

Heavy metal pollution of sediments is a growing concern in most parts of the world, and numerous studies focussed on identifying contaminated sediments by using a range of digestion methods and pollution indices to estimate sediment contamination have been described in the literature. The current work provides a critical review of the more commonly used sediment digestion methods and identifies that weak acid digestion is more likely to provide guidance on elements that are likely to be bioavailable than other traditional methods of digestion. This work also reviews common pollution indices and identifies the Nemerow Pollution Index as the most appropriate method for establishing overall sediment quality. Consequently, a modified Pollution Index that can lead to a more reliable understanding of whole sediment quality is proposed. This modified pollution index is then tested against a number of existing studies and demonstrated to give a reliable and rapid estimate of sediment contamination and quality.

Observations on the formation, growth and chemical composition of aerosols in an urban environment.

The charge and chemical composition of ambient particles in an urban environment were determined using a neutral particle and air ion spectrometer and an aerodyne compact time-of-flight aerosol mass spectrometer. Particle formation and growth events were observed on 20 of the 36 days of sampling, with eight of these events classified as strong. During these events, peaks in the concentration of intermediate and large ions were followed by peaks in the concentration of ammonium and sulfate, which were not observed in the organic fraction. Comparison of days with and without particle formation events revealed that ammonium and sulfate were the dominant species on particle formation days while high concentrations of biomass burning OA inhibited particle growth. Analyses of the degree of particle neutralization lead us to conclude that an excess of ammonium enabled particle formation and growth. In addition, the large ion concentration increased sharply during particle growth, suggesting that during nucleation the neutral gaseous species ammonia and sulfuric acid react to form ammonium and sulfate ions. Overall, we conclude that the mechanism of particle formation and growth involved ammonia and sulfuric acid, with limited input from organics.

Application of multicriteria decision making methods to compression ignition engine efficiency and gaseous, particulate, and greenhouse gas emissions.

Compression ignition (CI) engine design is subject to many constraints, which present a multicriteria optimization problem that the engine researcher must solve. In particular, the modern CI engine must not only be efficient but must also deliver low gaseous, particulate, and life cycle greenhouse gas emissions so that its impact on urban air quality, human health, and global warming is minimized. Consequently, this study undertakes a multicriteria analysis, which seeks to identify alternative fuels, injection technologies, and combustion strategies that could potentially satisfy these CI engine design constraints. Three data sets are analyzed with the Preference Ranking Organization Method for Enrichment Evaluations and Geometrical Analysis for Interactive Aid (PROMETHEE-GAIA) algorithm to explore the impact of (1) an ethanol fumigation system, (2) alternative fuels (20% biodiesel and synthetic diesel) and alternative injection technologies (mechanical direct injection and common rail injection), and (3) various biodiesel fuels made from 3 feedstocks (i.e., soy, tallow, and canola) tested at several blend percentages (20-100%) on the resulting emissions and efficiency profile of the various test engines. The results show that moderate ethanol substitutions (~20% by energy) at moderate load, high percentage soy blends (60-100%), and alternative fuels (biodiesel and synthetic diesel) provide an efficiency and emissions profile that yields the most "preferred" solutions to this multicriteria engine design problem. Further research is, however, required to reduce reactive oxygen species (ROS) emissions with alternative fuels and to deliver technologies that do not significantly reduce the median diameter of particle emissions.

Distribution and variation of metals in urban river sediments in response to microplastics presence, catchment characteristics and sediment properties.

Despite well documented studies on metal pollutants in aquatic ecosystems, knowledge on the combined effects of catchment characteristics, sediment properties, and emerging pollutants, such as microplastics (MPs) on the presence of metals in urban river sediments is still limited. In this study, the synergistic influence of MPs type and hazard indices, catchment characteristics and sediment properties on the variability of metals present in sediments was investigated based on a typical urban river, Brisbane River, Australia. It was noted that the mean concentrations of metals in Brisbane River decreases in the order of Al (94,142 ± 12,194 µg/g) > Fe (62,970 ± 8104 µg/g) > Mn (746 ± 258 µg/g) > Zn (196 ± 29 µg/g) > Cu (50 ± 19 µg/g) > Pb (47 ± 25 µg/g) > Ni (25 ± 3 µg/g) while the variability of metals decreases in the order of Pb > Cu > Mn > Al > Ni > Zn > Fe along the river. According to enrichment factor (Ef) contamination categories, Mn, Cu and Zn exert a moderate level of contamination (Ef > 2), while Fe, Ni, and Zn show slight sediment pollution (1 3) was found at sampling locations having a high urbanisation level and traffic related activities. Crustal metal elements (namely, Al, Fe, Mn) were found to be statistically significantly correlated with sediment properties (P < 0.05). Anthropogenic source metals (namely, Cu, Ni, Pb, Zn) were observed to be highly correlated with catchment characteristics. Additionally, the presence of metals in sediments were positively correlated with MPs concentration, and negatively correlated with MPs hazard indices. The outcomes of this study provide new insights for understanding the relationships among metals and various influential factors in the context of urban river sediment pollution, which will benefit the formulation of risk assessment and regulatory measures for protecting urban waterways.

Electroplating wastewater treatment by in-situ formation of organic anions and inorganic anions intercalated layered double hydroxides.

The electroplating wastewater containing various metal ions was treated by adding sodium dodecyl benzene sulfonate (SDBS) and regulating pH value, and the resulting precipitates were characterized by X-ray diffraction (XRD). The results showed that organic anions intercalated layered double hydroxides (OLDHs) and inorganic anions intercalated layered double hydroxides (ILDHs) were in-situ formed to remove heavy metals during the treatment process. In order to reveal the formation mechanism of the precipitates, SDB- intercalated Ni-Fe OLDHs, NO3- intercalated Ni-Fe ILDHs and Fe3+-DBS complexes were synthsized by co-precipitation at various pH values for comparison. These samples were characterized by XRD, Fourier Transform infrared (FTIR), element analysis as well as the aqueous residual concentrations of Ni2+ and Fe3+ were detected. The results showed that OLDHs with good crystal structures can be formed as pH≤7, while ILDHs began to form at pH = 8. When pH < 7, complexes of Fe3+ and organic anions with the ordered layered structure were formed firstly, and then with increase in pH value, Ni2+ inserted into the solid complex and the OLDHs began to form. However, Ni-Fe ILDHs were not formed when pH ≤ 7. The Ksp (Solubility Product Constant) of OLDHs was calculated to be 3.24 × 10-19 and that of ILDHs was 2.98 × 10-18 at pH = 8, which suggested that OLDHs might be easier to form than ILDHs. The formation process of ILDHs and OLDHs were also simulated through MINTEQ software, and the simulation output verified that OLDHs could be easier to form than ILDHs at pH ≤ 7. Information from this study provides a theoretical basis for effective in-situ formation of OLDHs in wastewater treatment.

Environmental implication of geochemical record in the Arctic Ny-Ålesund glacial sediment, Svalbard (Norway).

Glacial sediments as an important end member of the global dust system, could indicate changes in global climate, aerosols sources, ocean elements, and productivity. With global warming, ice caps shrinking and glaciers retreat at high latitudes have attracted concern. To understand the response of glacier to environment and climate in modern high latitude ice-marginal environments, this paper investigated glacial sediments in the Ny-Ålesund region of the Arctic and clarified the response of polar environmental to global changes through geochemical characteristics of glacial sediments. The results showed that: 1) main factors affecting the elements distribution of the Ny-Ålesund glacial sediments were thought as soil formation, bedrock and weathering, and biological activity; 2) variations of SiO2/Al2O3 and SiO2/Al2O3 + Fe2O3, indicating low weathering of the soil. The ratio of Na2O/K2O indicating a weak chemical weathering, was negatively correlated to the CIA. With the average CIA of Ny-Ålesund glacial sediments for main minerals of quartz, feldspar, and muscovite as well as dolomite and calcite 50.13, which implied glacial sediments at the early stage of chemical weathering and depletion of Ca and Na; 3) the separating effect of stones and soils by stone circle formation due to thermal conductivity and frost heave makes sediments in stone circle have lower chemical weathering with only two main minerals, albite and quartz; 4) changes of carbonate content in sediments with glacier front retreating in different period implied that weathering rate of calcite averagely reached an estimate of 0.0792%wt/year in glacier A. The succession of vegetation made biological weathering become an important driving force for carbonate leaching from glacial sediments. These results and data provide scientifically significant archive for future global change studies.