Photochemically Mediated Polymerization of Molecular Furan and Pyridine: Synthesis of Nanothreads at Reduced Pressures.

Nanothreads are emerging one-dimensional sp3-hybridized materials with high predicted tensile strength and a tunable band gap. They can be synthesized by compressing aromatic or nonaromatic small molecules to pressures ranging from 15-30 GPa. Recently, new avenues are being sought that reduce the pressure required to afford nanothreads; the focus has been placed on the polymerization of molecules with reduced aromaticity, favorable stacking, and/or the use of higher reaction temperatures. Herein, we report the photochemically mediated polymerization of pyridine and furan aromatic precursors, which achieves nanothread formation at reduced pressures. In the case of pyridine, it was found that a combination of slow compression/decompression with broadband UV light exposure yielded a crystalline product featuring a six-fold diffraction pattern with similar interplanar spacings to previously synthesized pyridine-derived nanothreads at a reduced pressure. When furan is compressed to 8 GPa and exposed to broadband UV light, a crystalline solid is recovered that similarly demonstrates X-ray diffraction with an interplanar spacing akin to that of the high-pressure synthesized furan-derived nanothreads. Our method realizes a 1.9-fold reduction in the maximum pressure required to afford furan-derived nanothreads and a 1.4-fold reduction in pressure required for pyridine-derived nanothreads. Density functional theory and multiconfigurational wavefunction-based computations were used to understand the photochemical activation of furan and subsequent cascade thermal cycloadditions. The reduction of the onset pressure is caused by an initial [4+4] cycloaddition followed by increasingly facile thermal [4+2]-cycloadditions during polymerization.

Perfect and Defective 13C-Furan-Derived Nanothreads from Modest-Pressure Synthesis Analyzed by 13C NMR.

The molecular structure of nanothreads produced by the slow compression of 13C4-furan was studied by advanced solid-state NMR. Spectral editing showed that >95% of carbon atoms were bonded to one hydrogen (C-H) and that there were 2-4% CH2, 0.6% C═O, and <0.3% CH3 groups. Alkenes accounted for 18% of the CH moieties, while trapped, unreacted furan made up 7%. Two-dimensional (2D) 13C-13C and 1H-13C NMR identified 12% of all carbon in asymmetric O-CH═CH-CH-CH- and 24% in symmetric O-CH-CH═CH-CH- rings. While the former represented defects or chain ends, some of the latter appeared to form repeating thread segments. Around 10% of carbon atoms were found in highly ordered, fully saturated nanothread segments. Unusually slow 13C spin-exchange with sites outside the perfect thread segments documented a length of at least 14 bonds; the small width of the perfect-thread signals also implied a fairly long, regular structure. Carbons in the perfect threads underwent relatively slow spin-lattice relaxation, indicating slow spin exchange with other threads and smaller amplitude motions. Through partial inversion recovery, the signals of the perfect threads were observed and analyzed selectively. Previously considered syn-threads with four different C-H bond orientations were ruled out by centerband-only detection of exchange NMR, which was, on the contrary, consistent with anti-threads. The observed 13C chemical shifts were matched well by quantum-chemical calculations for anti-threads but not for more complex structures like syn/anti-threads. These observations represent the first direct determination of the atomic-level structure of fully saturated nanothreads.

Nondestructive Measurements of the Mechanical and Structural Properties of Nanostructured Metalattices.

Metalattices are artificial 3D solids, periodic on sub-100 nm length scales, that enable the functional properties of materials to be tuned. However, because of their complex structure, predicting and characterizing their properties is challenging. Here we demonstrate the first nondestructive measurements of the mechanical and structural properties of metalattices with feature sizes down to 14 nm. By monitoring the time-dependent diffraction of short wavelength light from laser-excited acoustic waves in the metalattices, we extract their acoustic dispersion, Young's modulus, filling fraction, and thicknesses. Our measurements are in excellent agreement with macroscopic predictions and potentially destructive techniques such as nanoindentation and scanning electron microscopy, with increased accuracy over larger areas. This is interesting because the transport properties of these metalattices do not obey bulk predictions. Finally, this approach is the only way to validate the filling fraction of metalattices over macroscopic areas. These combined capabilities can enable accurate synthesis of nanoenhanced materials.

Nanoarchitecture through Strained Molecules: Cubane-Derived Scaffolds and the Smallest Carbon Nanothreads.

Relative to the rich library of small-molecule organics, few examples of ordered extended (i.e., nonmolecular) hydrocarbon networks are known. In particular, sp3 bonded, diamond-like materials represent appealing targets because of their desirable mechanical, thermal, and optical properties. While many covalent organic frameworks (COFs)-extended, covalently bonded, and porous structures-have been realized through molecular architecture with exceptional control, the design and synthesis of dense, covalent extended solids has been a longstanding challenge. Here we report the preparation of a sp3-bonded, low-dimensional hydrocarbon synthesized via high-pressure, solid-state diradical polymerization of cubane (C8H8), which is a saturated, but immensely strained, cage-like molecule. Experimental measurements show that the obtained product is crystalline with three-dimensional order that appears to largely preserve the basic structural topology of the cubane molecular precursor and exhibits high hardness (comparable to fused quartz) and thermal stability up to 300 °C. Among the plausible theoretical candidate structures, one-dimensional carbon scaffolds comprising six- and four-membered rings that pack within a pseudosquare lattice provide the best agreement with experimental data. These diamond-like molecular rods with extraordinarily small thickness are among the smallest members in the carbon nanothread family, and calculations indicate one of the stiffest one-dimensional systems known. These results present opportunities for the synthesis of purely sp3-bonded extended solids formed through the strain release of saturated molecules, as opposed to only unsaturated precursors.

Continuous wave Fe2+:ZnSe mid-IR optical fiber lasers.

Today fiber lasers in the visible to near-infrared region of the spectrum are well known, however mid-infrared fiber lasers have only recently approached the same commercial availability and power output. There has been a push to fabricate optical fiber lasers out of crystalline materials which have superior mid-IR performance and the ability to directly generate mid-IR light. However, these materials cannot currently be fabricated into an optical fiber via traditional means. We have used high pressure chemical vapor deposition (HPCVD) to deposit Fe2+:ZnSe into a silica optical fiber template. These deposited structures have been found to exhibit laser threshold behavior and emit CW mid-IR laser light with a central wavelength of 4.12 µm. This is the first reported solid state fiber laser with direct laser emission generated beyond 4 µm and represents a new frontier of possibility in mid-IR laser development.

Local Structure and Bonding of Carbon Nanothreads Probed by High-Resolution Transmission Electron Microscopy.

Carbon nanothreads are a new one-dimensional sp3-bonded nanomaterial of CH stoichiometry synthesized from benzene at high pressure and room temperature by slow solid-state polymerization. The resulting threads assume crystalline packing hundreds of micrometers across. We show high-resolution electron microscopy (HREM) images of hexagonal arrays of well-aligned thread columns that traverse the 80-100 nm thickness of the prepared sample. Diffuse scattering in electron diffraction reveals that nanothreads are packed with axial and/or azimuthal disregistry between them. Layer lines in diffraction from annealed nanothreads provide the first evidence of translational order along their length, indicating that this solid-state reaction proceeds with some regularity. HREM also reveals bends and defects in nanothread crystals that can contribute to the broadening of their diffraction spots, and electron energy-loss spectroscopy confirms them to be primarily sp3-hybridized, with less than 27% sp2 carbon, most likely associated with partially saturated "degree-4" threads.

Constraining Carbon Nanothread Structures by Experimental and Calculated Nuclear Magnetic Resonance Spectra.

A one-dimensional (1D) sp3 carbon nanomaterial with high lateral packing order, known as carbon nanothreads, has recently been synthesized by slowly compressing and decompressing crystalline solid benzene at high pressure. The atomic structure of an individual nanothread has not yet been determined experimentally. We have calculated the 13C nuclear magnetic resonance (NMR) chemical shifts, chemical shielding tensors, and anisotropies of several axially ordered and disordered partially saturated and fully saturated nanothreads within density functional theory and systematically compared the results with experimental solid-state NMR data to assist in identifying the structures of the synthesized nanothreads. In the fully saturated threads, every carbon atom in each progenitor benzene molecule has bonded to a neighboring molecule (i.e., 6 bonds per molecule, a so-called "degree-6" nanothread), while the partially saturated threads examined retain a single double bond per benzene ring ("degree-4"). The most-parsimonious theoretical fit to the experimental 1D solid-state NMR spectrum, constrained by the measured chemical shift anisotropies and key features of two-dimensional NMR spectra, suggests a certain combination of degree-4 and degree-6 nanothreads as plausible components of this 1D sp3 carbon nanomaterial, with intriguing hints of a [4 + 2] cycloaddition pathway toward nanothread formation from benzene columns in the progenitor molecular crystal, based on the presence of nanothreads IV-7, IV-8, and square polymer in the minimal fit.

Confined Chemical Fluid Deposition of Ferromagnetic Metalattices.

A magnetic, metallic inverse opal fabricated by infiltration into a silica nanosphere template assembled from spheres with diameters less than 100 nm is an archetypal example of a "metalattice". In traditional quantum confined structures such as dots, wires, and thin films, the physical dynamics in the free dimensions is typically largely decoupled from the behavior in the confining directions. In a metalattice, the confined and extended degrees of freedom cannot be separated. Modeling predicts that magnetic metalattices should exhibit multiple topologically distinct magnetic phases separated by sharp transitions in their hysteresis curves as their spatial dimensions become comparable to and smaller than the magnetic exchange length, potentially enabling an interesting class of "spin-engineered" magnetic materials. The challenge to synthesizing magnetic inverse opal metalattices from templates assembled from sub-100 nm spheres is in infiltrating the nanoscale, tortuous voids between the nanospheres void-free with a suitable magnetic material. Chemical fluid deposition from supercritical carbon dioxide could be a viable approach to void-free infiltration of magnetic metals in view of the ability of supercritical fluids to penetrate small void spaces. However, we find that conventional chemical fluid deposition of the magnetic late transition metal nickel into sub-100 nm silica sphere templates in conventional macroscale reactors produces a film on top of the template that appears to largely block infiltration. Other deposition approaches also face difficulties in void-free infiltration into such small nanoscale templates or require conducting substrates that may interfere with properties measurements. Here we report that introduction of "spatial confinement" into the chemical fluid reactor allows for fabrication of nearly void-free nickel metalattices by infiltration into templates with sphere sizes from 14 to 100 nm. Magnetic measurements suggest that these nickel metalattices behave as interconnected systems rather than as isolated superparamagnetic systems coupled solely by dipolar interactions.

The Chemical Structure of Carbon Nanothreads Analyzed by Advanced Solid-State NMR.

Carbon nanothreads are a new type of one-dimensional sp3-carbon nanomaterial formed by slow compression and decompression of benzene. We report characterization of the chemical structure of 13C-enriched nanothreads by advanced quantitative, selective, and two-dimensional solid-state nuclear magnetic resonance (NMR) experiments complemented by infrared (IR) spectroscopy. The width of the NMR spectral peaks suggests that the nanothread reaction products are much more organized than amorphous carbon. In addition, there is no evidence from NMR of a second phase such as amorphous mixed sp2/sp3-carbon. Spectral editing reveals that almost all carbon atoms are bonded to one hydrogen atom, unlike in amorphous carbon but as is expected for enumerated nanothread structures. Characterization of the local bonding structure confirms the presence of pure fully saturated "degree-6" carbon nanothreads previously deduced on the basis of crystal packing considerations from diffraction and transmission electron microscopy. These fully saturated threads comprise between 20% and 45% of the sample. Furthermore, 13C-13C spin exchange experiments indicate that the length of the fully saturated regions of the threads exceeds 2.5 nm. Two-dimensional 13C-13C NMR spectra showing bonding between chemically nonequivalent sites rule out enumerated single-site thread structures such as polytwistane or tube (3,0) but are consistent with multisite degree-6 nanothreads. Approximately a third of the carbon is in "degree-4" nanothreads with isolated double bonds. The presence of doubly unsaturated degree-2 benzene polymers can be ruled out on the basis of 13C-13C NMR with spin exchange rate constants tuned by rotational resonance and 1H decoupling. A small fraction of the sample consists of aromatic rings within the threads that link sections with mostly saturated bonding. NMR provides the detailed bonding information necessary to refine solid-state organic synthesis techniques to produce pure degree-6 or degree-4 carbon nanothreads.

Carbon Nitride Nanothread Crystals Derived from Pyridine.

Carbon nanothreads are a new one-dimensional sp3 carbon nanomaterial. They assemble into hexagonal crystals in a room temperature, nontopochemical solid-state reaction induced by slow compression of benzene to 23 GPa. Here we show that pyridine also reacts under compression to form a well-ordered sp3 product: C5NH5 carbon nitride nanothreads. Solid pyridine has a different crystal structure from solid benzene, so the nontopochemical formation of low-dimensional crystalline solids by slow compression of small aromatics may be a general phenomenon that enables chemical design of properties. The nitrogen in the carbon nitride nanothreads may improve processability, alters photoluminescence, and is predicted to reduce the bandgap.

Colloidal crystal order and structure revealed by tabletop extreme ultraviolet scattering and coherent diffractive imaging.

Colloidal crystals with specific electronic, optical, magnetic, vibrational properties, can be rationally designed by controlling fundamental parameters such as chemical composition, scale, periodicity and lattice symmetry. In particular, silica nanospheres -which assemble to form colloidal crystals- are ideal for this purpose, because of the ability to infiltrate their templates with semiconductors or metals. However characterization of these crystals is often limited to techniques such as grazing incidence small-angle scattering that provide only global structural information and also often require synchrotron sources. Here we demonstrate small-angle Bragg scattering from nanostructured materials using a tabletop-scale setup based on high-harmonic generation, to reveal important information about the local order of nanosphere grains, separated by grain boundaries and discontinuities. We also apply full-field quantitative ptychographic imaging to visualize the extended structure of a silica close-packed nanosphere multilayer, with thickness information encoded in the phase. These combined techniques allow us to simultaneously characterize the silica nanospheres size, their symmetry and distribution within single colloidal crystal grains, the local arrangement of nearest-neighbor grains, as well as to quantitatively determine the number of layers within the sample. Key to this advance is the good match between the high harmonic wavelength used (13.5nm) and the high transmission, high scattering efficiency, and low sample damage of the silica colloidal crystal at this wavelength. As a result, the relevant distances in the sample - namely, the interparticle distance (≈124nm) and the colloidal grains local arrangement (≈1µm) - can be investigated with Bragg coherent EUV scatterometry and ptychographic imaging within the same experiment simply by tuning the EUV spot size at the sample plane (5µm and 15µm respectively). In addition, the high spatial coherence of high harmonics light, combined with advances in imaging techniques, makes it possible to image near-periodic structures quantitatively and nondestructively, and enables the observation of the extended order of quasi-periodic colloidal crystals, with a spatial resolution better than 20nm. In the future, by harnessing the high time-resolution of tabletop high harmonics, this technique can be extended to dynamically image the three-dimensional electronic, magnetic, and transport properties of functional nanosystems.

In situ vibrational spectroscopy of adsorbed nitrogen in porous carbon materials.

This study uses in situ vibrational spectroscopy to probe nitrogen adsorption to porous carbon materials, including single-wall carbon nanotubes and Maxsorb super-activated carbon, demonstrating how the nitrogen Raman stretch mode is perturbed by adsorption. In all porous carbon samples upon N2 physisorption in the mesopore filling regime, the N2 Raman mode downshifts by ∼2 cm-1, a downshift comparable to liquid N2. The relative intensity of this mode increases as pressure is increased to saturation, and trends in the relative intensity parallel the volumetric gas adsorption isotherm. This mode with ∼2 cm-1 downshift is thus attributed to perturbations arising due to N2-N2 interactions in a condensed film. The mode is also observed for the activated carbon at 298 K, and the relative intensity once again parallels the gas adsorption isotherm. For select samples, a mode with a stronger downshift (>4 cm-1) is observed, and the stronger downshift is attributed to stronger N2-carbon surface interactions. Simulations for a N2 surface film support peak assignments. These results suggest that N2 vibrational spectroscopy could provide an indication of the presence or absence of porosity for very small quantities of samples.

Chemistry through cocrystals: pressure-induced polymerization of C2H2·C6H6 to an extended crystalline hydrocarbon.

The 1 : 1 acetylene-benzene cocrystal, C2H2·C6H6, was synthesized under pressure in a diamond anvil cell (DAC) and its evolution under pressure was studied with single-crystal X-ray diffraction and Raman spectroscopy. C2H2·C6H6 is stable up to 30 GPa, nearly 10× the observed polymerization pressure for molecular acetylene to polyacetylene. Upon mild heating at 30 GPa, the cocrystal was observed to undergo an irreversible transition to a mixture of amorphous hydrocarbon and a crystalline phase with similar diffraction to i-carbon, a nanodiamond polymorph currently lacking a definitive structure. Characterization of this i-carbon-like phase suggests that it remains hydrogenated and may help explain previous observations of nanodiamond polymorphs. Potential reaction pathways in C2H2·C6H6 are discussed and compared with other theoretical extended hydrocarbons that may be obtained through crystal engineering. The cocrystallization of benzene with other more inert gases may provide a novel pathway to selectively control the rich chemistry of these materials.

Mechanochemical Synthesis of Carbon Nanothread Single Crystals.

Synthesis of well-ordered reduced dimensional carbon solids with extended bonding remains a challenge. For example, few single-crystal organic monomers react under topochemical control to produce single-crystal extended solids. We report a mechanochemical synthesis in which slow compression at room temperature under uniaxial stress can convert polycrystalline or single-crystal benzene monomer into single-crystalline packings of carbon nanothreads, a one-dimensional sp3 carbon nanomaterial. The long-range order over hundreds of microns of these crystals allows them to readily exfoliate into fibers. The mechanochemical reaction produces macroscopic single crystals despite large dimensional changes caused by the formation of multiple strong, covalent C-C bonds to each monomer and a lack of reactant single-crystal order. Therefore, it appears not to follow a topochemical pathway, but rather one guided by uniaxial stress, to which the nanothreads consistently align. Slow-compression room-temperature synthesis may allow diverse molecular monomers to form single-crystalline packings of polymers, threads, and higher dimensional carbon networks.

Bioreplicated visual features of nanofabricated buprestid beetle decoys evoke stereotypical male mating flights.

Recent advances in nanoscale bioreplication processes present the potential for novel basic and applied research into organismal behavioral processes. Insect behavior potentially could be affected by physical features existing at the nanoscale level. We used nano-bioreplicated visual decoys of female emerald ash borer beetles (Agrilus planipennis) to evoke stereotypical mate-finding behavior, whereby males fly to and alight on the decoys as they would on real females. Using an industrially scalable nanomolding process, we replicated and evaluated the importance of two features of the outer cuticular surface of the beetle's wings: structural interference coloration of the elytra by multilayering of the epicuticle and fine-scale surface features consisting of spicules and spines that scatter light into intense strands. Two types of decoys that lacked one or both of these elements were fabricated, one type nano-bioreplicated and the other 3D-printed with no bioreplicated surface nanostructural elements. Both types were colored with green paint. The light-scattering properties of the nano-bioreplicated surfaces were verified by shining a white laser on the decoys in a dark room and projecting the scattering pattern onto a white surface. Regardless of the coloration mechanism, the nano-bioreplicated decoys evoked the complete attraction and landing sequence of Agrilus males. In contrast, males made brief flying approaches toward the decoys without nanostructured features, but diverted away before alighting on them. The nano-bioreplicated decoys were also electroconductive, a feature used on traps such that beetles alighting onto them were stunned, killed, and collected.

Benzene-derived carbon nanothreads.

Low-dimensional carbon nanomaterials such as fullerenes, nanotubes, graphene and diamondoids have extraordinary physical and chemical properties. Compression-induced polymerization of aromatic molecules could provide a viable synthetic route to ordered carbon nanomaterials, but despite almost a century of study this approach has produced only amorphous products. Here we report recovery to ambient pressure of macroscopic quantities of a crystalline one- dimensional sp(3) carbon nanomaterial formed by high-pressure solid-state reaction of benzene. X-ray and neutron diffraction, Raman spectroscopy, solid-state NMR, transmission electron microscopy and first-principles calculations reveal close- packed bundles of subnanometre-diameter sp(3)-bonded carbon threads capped with hydrogen, crystalline in two dimensions and short-range ordered in the third. These nanothreads promise extraordinary properties such as strength and stiffness higher than that of sp(2) carbon nanotubes or conventional high-strength polymers. They may be the first member of a new class of ordered sp(3) nanomaterials synthesized by kinetic control of high-pressure solid-state reactions.

Pressure-Induced Polymerization of LiN(CN)2.

The high-pressure behavior of lithium dicyanamide (LiN(CN)2) was studied with in situ Raman and infrared (IR) spectroscopies, and synchrotron angle-dispersive powder X-ray diffraction (PXRD) in a diamond anvil cell (DAC) to 22 GPa. The fundamental vibrational modes associated with molecular units were assigned using a combination of experimental data and density functional perturbation theory. Some low-frequency modes were observed for the first time. On the basis of spectroscopic and diffraction data, we suggest a polymorphic phase transformation at ∼8 GPa, wherein dicyanamide ions remain as discrete molecular species. Above ca. 18 GPa, dicyanamide units polymerize, forming a largely disordered network, and the extent of polymerization may be increased by annealing at elevated temperature. The polymerized product consists of tricyanomelaminate-like groups containing sp2-hybidized carbon-nitrogen bonds and exhibits a visible absorption edge near 540 nm. The product is recoverable to ambient conditions but is not stable in air/moisture.

Single-fluxon controlled resistance switching in centimeter-long superconducting gallium-indium eutectic nanowires.

The ability to manipulate a single quantum object, such as a single electron or a single spin, to induce a change in a macroscopic observable lies at the heart of nanodevices of the future. We report an experiment wherein a single superconducting flux quantum, or a fluxon, can be exploited to switch the resistance of a nanowire between two discrete values. The experimental geometry consists of centimeter-long nanowires of superconducting Ga-In eutectic, with spontaneously formed Ga nanodroplets along the length of the nanowire. The nonzero resistance occurs when a Ga nanodroplet traps one or more superconducting fluxons, thereby driving a Josephson weak-link created by a second nearby Ga nanodroplet normal. The fluxons can be inserted or flipped by careful manipulation of the magnetic field or temperature to produce one of many metastable states of the system.

Extreme electronic bandgap modification in laser-crystallized silicon optical fibres.

For decades now, silicon has been the workhorse of the microelectronics revolution and a key enabler of the information age. Owing to its excellent optical properties in the near- and mid-infrared, silicon is now promising to have a similar impact on photonics. The ability to incorporate both optical and electronic functionality in a single material offers the tantalizing prospect of amplifying, modulating and detecting light within a monolithic platform. However, a direct consequence of silicon's transparency is that it cannot be used to detect light at telecommunications wavelengths. Here, we report on a laser processing technique developed for our silicon fibre technology through which we can modify the electronic band structure of the semiconductor material as it is crystallized. The unique fibre geometry in which the silicon core is confined within a silica cladding allows large anisotropic stresses to be set into the crystalline material so that the size of the bandgap can be engineered. We demonstrate extreme bandgap reductions from 1.11 eV down to 0.59 eV, enabling optical detection out to 2,100 nm.

Evidence for ambient-temperature reversible catalytic hydrogenation in Pt-doped carbons.

In situ high-pressure Raman spectroscopy, with corroborating density functional calculations, is used to probe C-H chemical bonds formed when dissociated hydrogen diffuses from a platinum nanocatalyst to three distinct graphenic surfaces. At ambient temperature, hydrogenation and dehydrogenation are reversible in the combined presence of an active catalyst and oxygen heteroatoms. Hydrogenation apparently occurs through surface diffusion in a chemisorbed state, while dehydrogenation requires diffusion of the chemisorbed species back to an active catalyst.