Metamaterial adhesives for programmable adhesion through reverse crack propagation.

Adhesives are typically either strong and permanent or reversible with limited strength. However, current strategies to create strong yet reversible adhesives needed for wearable devices, robotics and material disassembly lack independent control of strength and release, require complex fabrication or only work in specific conditions. Here we report metamaterial adhesives that simultaneously achieve strong and releasable adhesion with spatially selectable adhesion strength through programmed cut architectures. Nonlinear cuts uniquely suppress crack propagation by forcing cracks to propagate backwards for 60× enhancement in adhesion, while allowing crack growth in the opposite direction for easy release and reusability. This mechanism functions in numerous adhesives on diverse substrates in wet and dry conditions and enables highly tunable adhesion with independently programmable adhesion strength in two directions simultaneously at any location. We create these multifunctional materials in a maskless, digital fabrication framework to rapidly customize adhesive characteristics with deterministic control for next-generation adhesives.

Characterization of mRNA therapeutics.

Therapeutic messenger RNAs (mRNAs) have emerged as powerful tools in the treatment of complex diseases, especially for conditions that lack efficacious treatment. The successful application of this modality can be attributed to its ability to encode entire proteins. While the large nature of these molecules has supported their success as therapeutics, its extended size creates several analytical challenges. To further support therapeutic mRNA development and its deployment in clinical trials, appropriate methods to support their characterization must be developed. In this review, we describe current analytical methods that have been used in the characterization of RNA quality, identity, and integrity. Advantages and limitations from several analytical techniques ranging from gel electrophoresis to liquid chromatography-mass spectrometry and from shotgun sequencing to intact mass measurements are discussed. We comprehensively describe the application of analytical methods in the measurements of capping efficiency, poly A tail analysis, as well as their applicability in stability studies.

Kuttsukigami: sticky sheet design.

Shaping 3D objects from 2D sheets enables form and function in diverse areas from art to engineering. Here we introduce kuttsukigami, which exploits sheet-sheet adhesion to create structure. The technique allows thin sheets to be sculpted without requiring sharp folds, enabling structure in a broad range of materials for a versatile and reconfigurable thin-sheet engineering design scheme. Simple closed structures from cylindrical loops to complex shapes like the Möbius loop are constructed and modeled through the balance between deformation and adhesion. Importantly, the balance can be used to create experimental measurements of elasticity in complex morphologies. More practically, kuttsukigami is demonstrated to encapsulate objects from the kitchen to micro scales and to build on-demand logic gates through sticky electronic sheets for truly reusable, reconfigurable devices.

Considerations and perspectives on the practice of incurred sample reanalysis assessment for chiral drugs.

Given the inherent complexities of bioanalysis, the role of incurred sample reanalysis (ISR) is increasingly appreciated in regulatory bioanalysis. Incurred sample reanalysis has evolved as an integral part of an assay to ensure method reproducibility. The current regulatory ISR guidelines do not provide clarity regarding ISR assessment for chiral drugs comprising enantiomers. Because chiral assays evaluate two enantiomers, there are additional complexities associated with the ISR data generation and interpretation. Based on the current literature, the practices for conducting ISR in chiral methods were reviewed and assessed. While ISR was conducted in chiral methods for both enantiomers using the acceptance criteria prescribed for non-chiral methods, there may be a need to streamline the nuances of ISR data interpretation and define the ISR requirements for chiral methods. The article provides perspectives on the ISR of enantiomeric drugs, including strategy development, by providing various hypothetical scenarios and possible considerations for defining ISR evaluation for chiral assays.

Previsual and Early Detection of Myrtle Rust on Rose Apple Using Indices Derived from Thermal Imagery and Visible-to-Short-Infrared Spectroscopy.

Myrtle rust, caused by the fungus Austropuccinia psidii, is a serious disease, which affects many Myrtaceae species. Commercial nurseries that propagate Myrtaceae species are prone to myrtle rust and require a reliable method that allows previsual and early detection of the disease. This study uses time-series thermal imagery and visible-to-short-infrared spectroscopy measurements acquired over 10 days from 81 rose apple plants (Syzygium jambos) that were either inoculated with myrtle rust or maintained disease-free. Using these data, the objectives were to (i) quantify the accuracy of models using thermal indices and narrowband hyperspectral indices (NBHI) for previsual and early detection of myrtle rust using data from older resistant green leaves and young susceptible red leaves and (ii) identify the most important NBHI and thermal indices for disease detection. Using predictions made on a validation dataset, models using indices derived from thermal imagery were able to perfectly (F1 score = 1.0; accuracy = 100%) distinguish control from infected plants previsually one day before symptoms appeared (1 DBS) and for all stages after early symptoms appeared. Compared with control plants, plants with myrtle rust had lower and more variable normalized canopy temperature, which was associated with higher stomatal conductance and transpiration. Using NBHI derived from green leaves, excellent previsual classification was achieved 3 DBS, 2 DBS, and 1 DBS (F1 score range = 0.89 to 0.94). The accurate characterization of myrtle rust during previsual and early stages of disease development suggests that a robust detection methodology could be developed within a nursery setting. [Formula: see text] Copyright © 2023 The Author(s). This is an open access article distributed under the CC BY 4.0 International license.

Identification of lysine isobutyrylation as a new histone modification mark.

Short-chain acylations of lysine residues in eukaryotic proteins are recognized as essential posttranslational chemical modifications (PTMs) that regulate cellular processes from transcription, cell cycle, metabolism, to signal transduction. Lysine butyrylation was initially discovered as a normal straight chain butyrylation (Knbu). Here we report its structural isomer, branched chain butyrylation, i.e. lysine isobutyrylation (Kibu), existing as a new PTM on nuclear histones. Uniquely, isobutyryl-CoA is derived from valine catabolism and branched chain fatty acid oxidation which is distinct from the metabolism of n-butyryl-CoA. Several histone acetyltransferases were found to possess lysine isobutyryltransferase activity in vitro, especially p300 and HAT1. Transfection and western blot experiments showed that p300 regulated histone isobutyrylation levels in the cell. We resolved the X-ray crystal structures of HAT1 in complex with isobutyryl-CoA that gleaned an atomic level insight into HAT-catalyzed isobutyrylation. RNA-Seq profiling revealed that isobutyrate greatly affected the expression of genes associated with many pivotal biological pathways. Together, our findings identify Kibu as a novel chemical modification mark in histones and suggest its extensive role in regulating epigenetics and cellular physiology.

Drug-Induced Conformational Dynamics of P-Glycoprotein Underlies the Transport of Camptothecin Analogs.

P-glycoprotein (Pgp) plays a pivotal role in drug bioavailability and multi-drug resistance development. Understanding the protein's activity and designing effective drugs require insight into the mechanisms underlying Pgp-mediated transport of xenobiotics. In this study, we investigated the drug-induced conformational changes in Pgp and adopted a conformationally-gated model to elucidate the Pgp-mediated transport of camptothecin analogs (CPTs). While Pgp displays a wide range of conformations, we simplified it into three model states: 'open-inward', 'open-outward', and 'intermediate'. Utilizing acrylamide quenching of Pgp fluorescence as a tool to examine the protein's tertiary structure, we observed that topotecan (TPT), SN-38, and irinotecan (IRT) induced distinct conformational shifts in the protein. TPT caused a substantial shift akin to AMPPNP, suggesting ATP-independent 'open-outward' conformation. IRT and SN-38 had relatively moderate effects on the conformation of Pgp. Experimental atomic force microscopy (AFM) imaging supports these findings. Further, the rate of ATPase hydrolysis was correlated with ligand-induced Pgp conformational changes. We hypothesize that the separation between the nucleotide-binding domains (NBDs) creates a conformational barrier for substrate transport. Substrates that reduce the conformational barrier, like TPT, are better transported. The affinity for ATP extracted from Pgp-mediated ATP hydrolysis kinetics curves for TPT was about 2-fold and 3-fold higher than SN-38 and IRT, respectively. On the contrary, the dissociation constants (KD) determined by fluorescence quenching for these drugs were not significantly different. Saturation transfer double difference (STDD) NMR of TPT and IRT with Pgp revealed that similar functional groups of the CPTs are accountable for Pgp-CPTs interactions. Efforts aimed at modifying these functional groups, guided by available structure-activity relationship data for CPTs and DNA-Topoisomerase-I complexes, could pave the way for the development of more potent next-generation CPTs.

Tough Bonding of Liquid Metal-Elastomer Composites for Multifunctional Adhesives.

Liquid metal (LM) composites, which consist of LM droplets dispersed in highly deformable elastomers, have recently gained interest as a multifunctional material for soft robotics and electronics. The incorporation of LM into elastic solids allows for unique combinations of material properties such as high stretchability with thermal and electrical conductivity comparable to metals. However, it is currently a challenge to incorporate LM composites into integrated systems consisting of diverse materials and components due to a lack of adhesion control. Here, a chemical anchoring methodology to increase adhesion of LM composites to diverse substrates is presented. The fracture energy increases up to 100× relative to untreated surfaces, with values reaching up to 7800 J m-2 . Furthermore, the fracture energy, tensile modulus, and thermal conductivity can be tuned together by controlling the microstructure of LM composites. Finally, the bonding technique is used to integrate LM composites with functional electronic components without encapsulation or clamping, allowing for extreme deformations while maintaining exceptional thermal and electrical conductivity. These findings can accelerate the adoption of LM composites into complex soft robotic and electronic systems where strong, reliable bonding between diverse materials and components is required.

BIOANALYSIS AND BIOTRANSFORMATION OF OLIGONUCLEOTIDE THERAPEUTICS BY LIQUID CHROMATOGRAPHY-MASS SPECTROMETRY.

Since 2016, eight new oligonucleotide therapies have been approved which has led to increased interest in oligonucleotide analysis. There is a particular need for powerful bioanalytical tools to study the metabolism and biotransformation of these molecules. This review provides the background on the biological basis of these molecules as currently used in therapies. The article also reviews the current state of analytical methodology including state of the art sample preparation techniques, liquid chromatography-mass spectrometry methods, and the current limits of detection/quantitation. Finally, the article summarizes the challenges in oligonucleotide bioanalysis and provides future perspectives for this emerging field. © 2020 John Wiley & Sons Ltd.

X-ray scattering as an effective tool for characterizing liquid metal composite morphology.

Quantitative analysis of particle size and size distribution is crucial in establishing structure-property relationships of composite materials. An emerging soft composite architecture involves dispersing droplets of liquid metal throughout an elastomer, enabling synergistic properties of metals and soft polymers. The structure of these materials is typically characterized through real-space microscopy and image analysis; however, these techniques rely on magnified images that may not represent the global-averaged size and distribution of the droplets. In this study, we utilize ultra-small angle X-ray scattering (USAXS) as a reciprocal-space characterization technique that yields global-averaged dimensions of eutectic gallium indium (EGaIn) alloy soft composites. The Unified fit and Monte Carlo scattering methods are applied to determine the particle size and size distributions of the liquid metal droplets in the composites and are shown to be in excellent agreement with results from real-space image analysis. Additionally, all methods indicate that the droplets are getting larger as they are introduced into composites, suggesting that the droplets are agglomerating or possibly coalescing during dispersion. This work demonstrates the viability of X-ray scattering to elucidate structural information about liquid metal droplets for material development for applications in soft robotics, soft electronics, and multifunctional materials.

Top 10 research priorities for people living with pulmonary fibrosis, their caregivers, healthcare professionals and researchers.

INTRODUCTION: People with pulmonary fibrosis (PF) experience a high symptom burden, reduced quality of life and a shortened lifespan. Treatment options are limited and little is known about what patients, caregivers and healthcare professionals (HCPs)/researchers consider as the most important research priorities. This study aimed to identify the top 10 research priorities for PF across all stakeholders. METHODS: Participants included people with PF, caregivers and HCPs/researchers involved with PF. The research priority setting exercise involved three stages: (1) identifying priorities using an open-ended questionnaire and thematic analysis, (2) development of specific research questions at a face-to-face workshop, and (3) online ranking of research questions to identify the top 10 research priorities using nominal group ranking method. RESULTS: 196 participants completed stage 1 generating 560 questions and 14 research themes were identified. Stage 2 involved 32 participants and generated 53 indicative questions from which 39 were used for the final ranking. Stage 3 was completed by 270 participants. The top ranked priorities focussed on medications to reverse scarring in the lungs (ranked 1st), improving lung function (ranked 2nd, 6th and 8th), interventions aimed at alleviating symptoms (ranked 5th and 7th), prevention of PF (ranked 3rd and 4th) and the best exercise programme for PF (ranked 10th). There was good consensus among patients/carers and HCPs/researchers on the top 10 priorities, however, causes of acute exacerbations and early diagnosis for improving survival, was ranked higher by HCPs/researchers. CONCLUSION: Interventions for preserving lung health and alleviation of symptom burden were top research priorities for PF stakeholders.

Deterministic control of adhesive crack propagation through jamming based switchable adhesives.

Controlling delamination across a material interface is a foundation of adhesive science and technology. This ranges from creating permanent, strong adhesives which limit crack propagation to reversible adhesives which initiate cracks for release. Methods which dynamically control cracks can lead to more robust adhesion, however specific control of crack initiation, propagation, and arresting is challenging because time scales of crack propagation are much faster than times scales of mechanisms to arrest cracks. Here we show the deterministic control of crack initiation, propagation, and arresting by integrating a granular jamming layer into adhesive films. This allows for controlled initiation of a propagating crack by reducing rigidity and then rapidly arresting the crack through jamming, with a rise in stiffness and an 11× enhancement in adhesion. This process is highly reversible and programmable, allowing for numerous crack initiation, propagation, and arresting cycles at arbitrary selectable locations in a peeling adhesive. We demonstrate this crack-control approach in single and multiple peel directions under fixed load conditions in response to diverse pressurization input signal profiles (i.e. time varying propagation and arresting scenarios).

Evaluation of alkylamines and stationary phases to improve LC-MS of oligonucleotides.

This study evaluated four bridged-ethylene hybrid (BEH) columns containing C18 (130 Å), peptide C18 (300 Å), phenyl, or a mixed-mode charged surface hybrid (CSH C18 ) using a wide range of antisense oligonucleotide therapeutics. The BEH C18 , peptide, and phenyl columns were all capable of providing significant retention of oligonucleotide samples across multiple ion-pairing systems using alkylamines and 1,1,1,3,3,3,-hexafluoroisopropanol (HFIP). The retention of the oligonucleotides varied depending on the choice of alkylamine, with the order of retention being dimethylcyclohexylamine > diisopropylethylamine > triethylamine. The selectivity of these columns for several closely eluting impurities was similar. Although overall the C18 , peptide, and phenyl columns were all found to be capable of analyzing oligonucleotide therapeutics, the phenyl column was found to be the most retentive and the C18 column provided the best peak shape. The CSH C18 column was found to be degraded by the alkylamine-HFIP mobile phase despite the mobile phase being within the pH stability range of the column.

Assessment of brain-to-blood drug distribution using liquid chromatography.

Delivery of already existing and new drugs under development to the brain necessitates passage across the blood-brain barrier (BBB) with its tight intercellular junctions, molecular components and transporter systems. Consequently, it is critical to identify the extent of brain permeation and the partitioning across the BBB. The interpretation of brain-to-blood ratios is considered to be a significant and fundamental approach for estimating drug penetration through BBB, the brain-targeting ability and central nervous system (CNS) pharmacokinetics. Among the different bioanalytical techniques, liquid chromatography with various detectors has been widely used for determination of these ratios. This review defines the different approaches for sample preparation, extraction techniques and liquid chromatography procedures concerned with the determination of drugs in blood and brain tissues and the assessment of brain-to-blood levels. These approaches are expanded to cover the analysis of several drug classes such as CNS-acting drugs, chemotherapeutics, antidiabetics, herbal medicinal products, radiopharmaceuticals, antibiotics and antivirals. Accordingly, stability in biological matrices and matrix effects are investigated. The different administration/formulation effects and the possible deviations in these ratios are also disscussed.

Modeling cationic adduction of oligonucleotides using electrospray desorption ionization.

RATIONALE: Cationic adduction causes poor sensitivity and increases spectral complexity during mass spectral analysis of oligonucleotides and alkylamines are used to reduce this adduction. It is unclear the effect of the physiochemical properties of the alkylamines on the reduction of the cationic adduction. METHODS: All samples were directly infused into a Synapt G2 HDMS quadrupole time-of-flight (TOF) hybrid mass spectrometer in negative ion electrospray ionization mode through the native built-in fluidics system. The infusion flow rate was set to 50 µL/min. The TOFMS tuning parameters were as follows: capillary voltage -2.0 kV, cone voltage 25 V, extraction cone voltage 2 V, source temperature 125°C, desolvation temperature 450°C, cone gas flow rate 0 L/h, and desolvation gas (nitrogen) flow rate 1000 L/h. RESULTS: A quantitative model was created to predict the optimized alkylamine for MS analysis, while a qualitative model was generated to explain the most important physiochemical properties: proton affinity (13.83%), gas-phase basicity (11.79%), pKa (11.47%), boiling point (10.73%), MW (10.3%), Henry's Law Constant (9.56%), and partition coefficient (logP) (9.44%). The quantitative model was applied to RNA (microRNA) and a phosphorothioate and predicts the trend of cationic adduction. CONCLUSIONS: Two models are described to understand the physiochemical properties that contribute to the adduction and to provide users a quick mathematical tool to predict the best choice of alkylamine to lower cationic adduction and decrease spectral complexity while enhancing sensitivity.

Peer Connect Service for people with pulmonary fibrosis in Australia: Participants' experiences and process evaluation.

BACKGROUND AND OBJECTIVE: People living with pulmonary fibrosis (PF) report unmet needs for information and support. Lung Foundation Australia (LFA) have developed the Peer Connect Service to facilitate telephone support for people with PF across Australia. This project documented the experiences of participants and the resources required to support the service. METHODS: Consenting participants took part in semi-structured interviews by telephone. Primary peers (peers who agreed to initiate contact) and secondary peers (eligible patients who sought a peer match) were interviewed. Thematic analysis was undertaken by two independent researchers. Data were collected on the number of matches and contacts required to establish each match. RESULTS: Interviews were conducted with 32 participants (16 primary peers, 15 secondary peers and 1 who was both), aged from 53 to 89 years with 56% being male. Major themes included the value of shared experiences, providing mutual support and the importance of shared personal characteristics (e.g. gender and hobbies) in allowing information and emotional support needs to be met. Participants saw face-to-face contact with peers as highly desirable whilst acknowledging the practical difficulties. Primary peers were cognizant that their role was not to provide medical advice but to listen and share experiences. In the 12-month period, 60 peer matches were made, each match requiring a minimum of seven staff contacts. CONCLUSION: The Peer Connect Service provides a unique opportunity for people with PF to share experiences and offer mutual support. This telephone matching model may be useful in providing peer support for individuals with rare diseases who are geographically dispersed.

Displacement of the transcription factor B reader domain during transcription initiation.

Transcription initiation by archaeal RNA polymerase (RNAP) and eukaryotic RNAP II requires the general transcription factor (TF) B/ IIB. Structural analyses of eukaryotic transcription initiation complexes locate the B-reader domain of TFIIB in close proximity to the active site of RNAP II. Here, we present the first crosslinking mapping data that describe the dynamic transitions of an archaeal TFB to provide evidence for structural rearrangements within the transcription complex during transition from initiation to early elongation phase of transcription. Using a highly specific UV-inducible crosslinking system based on the unnatural amino acid para-benzoyl-phenylalanine allowed us to analyze contacts of the Pyrococcus furiosus TFB B-reader domain with site-specific radiolabeled DNA templates in preinitiation and initially transcribing complexes. Crosslink reactions at different initiation steps demonstrate interactions of TFB with DNA at registers +6 to +14, and reduced contacts at +15, with structural transitions of the B-reader domain detected at register +10. Our data suggest that the B-reader domain of TFB interacts with nascent RNA at register +6 and +8 and it is displaced from the transcribed-strand during the transition from +9 to +10, followed by the collapse of the transcription bubble and release of TFB from register +15 onwards.

High thermal conductivity in soft elastomers with elongated liquid metal inclusions.

Soft dielectric materials typically exhibit poor heat transfer properties due to the dynamics of phonon transport, which constrain thermal conductivity (k) to decrease monotonically with decreasing elastic modulus (E). This thermal-mechanical trade-off is limiting for wearable computing, soft robotics, and other emerging applications that require materials with both high thermal conductivity and low mechanical stiffness. Here, we overcome this constraint with an electrically insulating composite that exhibits an unprecedented combination of metal-like thermal conductivity, an elastic compliance similar to soft biological tissue (Young's modulus < 100 kPa), and the capability to undergo extreme deformations (>600% strain). By incorporating liquid metal (LM) microdroplets into a soft elastomer, we achieve a ∼25× increase in thermal conductivity (4.7 ± 0.2 W⋅m-1⋅K-1) over the base polymer (0.20 ± 0.01 W⋅m-1·K-1) under stress-free conditions and a ∼50× increase (9.8 ± 0.8 W⋅m-1·K-1) when strained. This exceptional combination of thermal and mechanical properties is enabled by a unique thermal-mechanical coupling that exploits the deformability of the LM inclusions to create thermally conductive pathways in situ. Moreover, these materials offer possibilities for passive heat exchange in stretchable electronics and bioinspired robotics, which we demonstrate through the rapid heat dissipation of an elastomer-mounted extreme high-power LED lamp and a swimming soft robot.

Recent advances in liquid chromatographic methods for the determination of selective serotonin reuptake inhibitors and serotonin norepinephrine reuptake inhibitors.

Depression is now the second largest public health burden throughout the world. Selective serotonin reuptake inhibitors (SSRIs) and serotonin norepinephrine reuptake inhibitors (SNRIs) have replaced older antidepressants to become first-line medications to treat this disease with increased remission rates and markedly decreased incidence of severe adverse events. Traditional and modern bioanalytical strategies for SSRI and SNRI determination are being continuously improved. There has also been a recent increase in the use of unconventional sample preparation methods. This review critically evaluates the development of SSRI and SNRI liquid chromatographic analytical methods published between 2014 and mid-2019, with special attention to novel sample preparation methods.

In vitro metabolism of 2'-ribose unmodified and modified phosphorothioate oligonucleotide therapeutics using liquid chromatography mass spectrometry.

Antisense oligonucleotides (ASOs) have been touted as an emerging therapeutic class to treat genetic disorders and infections. The evaluation of metabolic stability of ASOs during biotransformation is critical due to concerns regarding drug safety. Because the effects of the modifications in ASOs on their metabolic stabilities are different from unmodified ASOs, studies that afford an understanding of these effects as well as propose proper methods to determine modified and unmodified ASO metabolites are imperative. An LC-tandem mass spectrometry method offering good selectivity with a high-quality separation using 30 mm N,N-dimethylcyclohexylamine and 100 mm 1,1,1,3,3,3-hexafluoro-2-propanol was utilized to identify each oligonucleotide metabolite. Subsequently, the method was successfully applied to a variety of in vitro systems including endo/exonuclease digestion, mouse liver homogenates, and then liver microsomes, after which the metabolic stability of unmodified versus modified ASOs was compared. Typical patterns of chain-shortened metabolites generated by mainly 3'-exonucleases were observed in phosphodiester and phosphorothioate ASOs, and endonuclease activity was identically observed in gapmers that showed relatively more resistance to nuclease degradation. Overall, the degradation of each ASO occurred more slowly corresponding to the degree of chemical modifications, while 5'-exonuclease activities were only observed in gapmers incubated in mouse liver homogenates. Our findings provide further understanding of the impact of modifications on the metabolic stability of ASOs, which facilitates the development of future ASO therapeutics.