The Mechanism of Rh(I)-Catalyzed Coupling of Benzotriazoles and Allenes Revisited: Substrate Inhibition, Proton Shuttling, and the Role of Cationic vs Neutral Species.

Direct coupling of benzotriazole to unsaturated substrates such as allenes represents an atom-efficient method for the construction of biologically and pharmaceutically interesting functional structures. In this work, the mechanism of the N2-selective Rh complex-catalyzed coupling of benzotriazoles to allenes was investigated in depth using a combination of experimental and theoretical techniques. Substrate coordination, inhibition, and catalyst deactivation was probed in reactions of the neutral and cationic catalyst precursors [Rh(µ-Cl)(DPEPhos)]2 and [Rh(DPEPhos)(MeOH)2]+ with benzotriazole and allene, giving coordination, or coupling of the substrates. Formation of a rhodacycle, formed by unprecedented 1,2-coupling of allenes, is responsible for catalyst deactivation. Experimental and computational data suggest that cationic species, formed either by abstraction of the chloride ligand or used directly, are relevant for catalysis. Isomerization of benzotriazole and cleavage of its N-H bond are suggested to occur by counteranion-assisted proton shuttling. This contrasts with a previously proposed scenario in which oxidative N-H addition at Rh is one of the key steps. Based on the mechanistic analysis, the catalytic coupling reaction could be optimized, leading to lower reaction temperature and shorter reaction times compared to the literature.

A Phosphorus-centred, Zirconocene-bridged Tetraradical: Synthesis, Structure and Application as Molecular Double Switch.

Biradicals are important intermediates in the formation and breaking of a chemical bond. Their use as molecular switches is of particular interest. Much less is known about tetraradicals, which can, for example, consist of two biradical(oid) units. Here we report the synthesis of the first persistent phosphorus-centred tetraradical bound to a transition metal fragment. Starting from a zirconocene complex, rac-(ebthi)ZrCl2 (rac-(ebthi) = 1,2-ethylene-1,10-bis(h5-tetrahydroin-denyl), two cyclo-1,3-diphospha-pentane-1,3-diyls were successfully introduced, which finally led to the isolation of a deep green zircon-cene-bridged bis(biradicaloid) complex (5) that can act as a double molecular switch. Under the influence of light (570 nm), this tetra-radical forms a transannular bond in each of the two five-membered biradical units, leading to the formation of housane 5h. Upon irradiation at 415 nm, the reverse reaction is observed, fully reco-vering tetraradical 5. Through single-crystal-to-single-crystal trans-formation, both stable species of the molecular switch could be structurally characterised using SCXRD. The switching under the influence of light and the activation of molecular hydrogen were analysed in solution using NMR and UV spectroscopy. It was found that the addition of one or two equivalents of molecular hydrogen can be switched on and off by light.

A General Concept for the Electronic and Steric Modification of 1-Metallacyclobuta-2,3-dienes: A Case Study of Group 4 Metallocene Complexes.

The synthesis of group 4 metal 1-metallacyclobuta-2,3-dienes as organometallic analogues of elusive 1,2-cyclobutadiene has so far been limited to SiMe3 substituted examples. We present the synthesis of two Ph substituted dilithiated ligand precursors for the preparation of four new 1-metallacyclobuta-2,3-dienes [rac-(ebthi)M] (M=Ti, Zr; ebthi=1,2-ethylene-1,10-bis(η5-tetrahydroindenyl)). The organolithium compounds [Li2(RC3Ph)] (1 b: R=Ph, 1 c: R=SiMe3) as well as the metallacycles of the general formula [rac-(ebthi)M(R1C3R2)] (2 b: M=Ti, R1=R2=Ph, 2 c: M=Ti, R1=Ph, R2=SiMe3; 3 b: M=Zr, R1=R2=Ph; 3 c: M=Zr, R1=Ph, R2=SiMe3) were fully characterised. Single crystal X-ray diffraction and quantum chemical bond analysis of the Ti and Zr complexes reveal ligand influence on the biradicaloid character of the titanocene complexes. X-band EPR spectroscopy of structurally similar Ti complexes [rac-(ebthi)Ti(Me3SiC3SiMe3)] (2 a), 2 b, and 2 c was carried out to evaluate the accessibility of an EPR active triplet state. Cyclic voltammetry shows that introduction of Ph groups renders the complexes easier to reduce. 13C CPMAS NMR analysis provides insights into the cause of the low field shift of the resonances of metal-bonded carbon atoms and provides evidence of the absence of the ß-C-Ti interaction.

Solution and solid-state studies of hydrogen and halogen bonding with N-heterocyclic carbene supported nickel(II) fluoride complexes.

Nickel fluoride complexes of the type [Ni(F)(L)2(ArF)] (L = phosphine, ArF = fluorinated arene) are well-known to form strong halogen and hydrogen bonds in solution and in the solid state. A comprehensive study of such non-covalent interactions using bis(carbene) complexes as acceptors and suitable halogen and hydrogen bond donors is presented. In solution, the complex [Ni(F)(iPr2Im)2(C6F5)] forms halogen and hydrogen bonds with iodopentafluorobenzene and indole, respectively, which have formation constants (K300) an order of magnitude greater than those of structurally related phosphine supported nickel fluorides. Co-crystallisation of this complex and its backbone-methylated analogue [Ni(F)(iPr2Me2Im)2(C6F5)] with 1,4-diiodotetrafluorobenzene produces halogen bonding adducts which were characterised by X-ray analysis and 19F MAS solid state NMR analysis. Differences in the chemical shifts between the nickel fluoride and its halogen bonding adduct are well in line with data that were obtained from titration studies in solution.

Synthesis, Coordination Chemistry, and Mechanistic Studies of P,N-Type Phosphaalkene-Based Rh(I) Complexes.

The synthesis of P,N-phosphaalkene ligands, py-CH═PMes* (1, py = 2-pyridyl, Mes* = 2,4,6-tBu-C6H2) and the novel quin-CH═PMes* (2, quin = 2-quinolinyl) is described. The reaction with [Rh(µ-Cl)cod]2 produces Rh(I) bis(phosphaalkene) chlorido complexes 3 and 4 with distorted trigonal bipyramidal coordination environments. Complexes 3 and 4 show a pronounced metal-to-ligand charge transfer (MLCT) from Rh into the ligand P═C π* orbitals. Upon heating, quinoline-based complex 4 undergoes twofold C-H bond activation at the o-tBu groups of the Mes* substituents to yield the cationic bis(phosphaindane) Rh(I) complex 5, which could not be observed for the pyridine-based analogue 3. Using sub- or superstoichiometric amounts of AgOTf the C-H bond activation at an o-tBu group of one or at both Mes* was detected, respectively. Density functional theory (DFT) studies suggest an oxidative proton shift pathway as an alternative to a previously reported high-barrier oxidative addition at Rh(I). The Rh(I) mono- and bis(phosphaindane) triflate complexes 6 and 7, respectively, undergo deprotonation at the benzylic CH2 group of the phosphaindane unit in the presence of KOtBu to furnish neutral, distorted square-planar Rh(I) complexes 8 and 9, respectively, with one of the P,N ligands being dearomatized. All complexes were fully characterized, including multinuclear NMR, vibrational, and ultraviolet-visible (UV-vis) spectroscopy, as well as single-crystal X-ray and elemental analysis.

Molecular Catalysts for the Reductive Homocoupling of CO2 towards C2+ Compounds.

The conversion of CO2 into multicarbon (C2+ ) compounds by reductive homocoupling offers the possibility to transform renewable energy into chemical energy carriers and thereby create "carbon-neutral" fuels or other valuable products. Most available studies have employed heterogeneous metallic catalysts, but the use of molecular catalysts is still underexplored. However, several studies have already demonstrated the great potential of the molecular approach, namely, the possibility to gain a deep mechanistic understanding and a more precise control of the product selectivity. This Minireview summarizes recent progress in both the thermo- and electrochemical reductive homocoupling of CO2 toward C2+ products mediated by molecular catalysts. In addition, reductive CO homocoupling is discussed as a model for the further conversion of intermediates obtained from CO2 reduction, which may serve as a source of inspiration for developing novel molecular catalysts in the future.

Dehydropolymerisation of Methylamine Borane and an N-Substituted Primary Amine Borane Using a PNP Fe Catalyst.

Dehydropolymerisation of methylamine borane (H3 B⋅NMeH2 ) using the well-known iron amido complex [(PNP)Fe(H)(CO)] (PNP=N(CH2 CH2 PiPr2 )2 ) (1) gives poly(aminoborane)s by a chain-growth mechanism. In toluene, rapid dehydrogenation of H3 B⋅NMeH2 following first-order behaviour as a limiting case of a more general underlying Michaelis-Menten kinetics is observed, forming aminoborane H2 B=NMeH, which selectively couples to give high-molecular-weight poly(aminoborane)s (H2 BNMeH)n and only traces of borazine (HBNMe)3 by depolymerisation after full conversion. Based on a series of comparative experiments using structurally related Fe catalysts and dimethylamine borane (H3 B⋅NMe2 H) polymer formation is proposed to occur by nucleophilic chain growth as reported earlier computationally and experimentally. A silyl functionalised primary borane H3 B⋅N(CH2 SiMe3 )H2 was studied in homo- and co-dehydropolymerisation reactions to give the first examples for Si containing poly(aminoborane)s.

A Comparative Study on the Thermodynamics of Halogen Bonding of Group†10 Pincer Fluoride Complexes.

The thermodynamics of halogen bonding of a series of isostructural Group 10 metal pincer fluoride complexes of the type [(3,5-R2 -tBu POCOPtBu )MF] (3,5-R2 -tBu POCOPtBu =κ3 -C6 HR2 -2,6-(OPtBu2 )2 with R=H, tBu, COOMe; M=Ni, Pd, Pt) and iodopentafluorobenzene was investigated. Based on NMR experiments at different temperatures, all complexes 1-tBu (R=tBu, M=Ni), 2-H (R=H, M=Pd), 2-tBu (R=tBu, M=Pd), 2-COOMe (R=COOMe, M=Pd) and 3-tBu (R=tBu, M=Pt) form strong halogen bonds with Pd complexes showing significantly stronger binding to iodopentafluorobenzene. Structural and computational analysis of a model adduct of complex 2-tBu with 1,4-diiodotetrafluorobenzene as well as of structures of iodopentafluorobenzene in toluene solution shows that formation of a type I contact occurs.

Visiting the Limits between a Highly Strained 1-Zirconacyclobuta-2,3-diene and Chemically Robust Dizirconacyclooctatetraene.

The reaction of the allene precursor Li2 (Me3 SiC3 SiMe3 ) with [Cp2 ZrCl2 ] (Cp=cyclopentadienyl) was examined. The selective formation of hitherto unknown linear, allene-bridged dizirconocene complexes [(Cp2 ZrCl)2 {-µ-(Me3 Si)C3 (SiMe3 )-}] and [(Cp2 Zr)2 {-µ-(Me3 Si)C3 (SiMe3 )-}2 ] was observed. Upon σ coordination of the allenediyl unit to {Cp2 Zr}, pyrophoric Li2 (Me3 SiC3 SiMe3 ) is tamed stepwise to yield a surprisingly robust 1,5-dizirconacyclooctatetra-2,3,6,7-ene with cumulated double bonds. This complex is unexpectedly inert against moisture, air, water and acetone. Surprisingly, it degrades under MS conditions to give the highly strained 1-zirconacyclobuta-2,3-diene. All compounds isolated have been fully characterised and the molecular structures are discussed. The stability and reactivity of these complexes are rationalised by DFT computations.

Titanocene Silylpropyne Complexes: Promising Intermediates en route to a Four-Membered 1-Metallacyclobuta-2,3-diene?

Coordination of the alkyl-substituted alkynes Me3 SiC2 CH2 R (1: R=SiMe3 ; 2: R=N(SiMe3 )2 ) to titanocene centres [Cp'2 Ti] (Cp'=Cp, Cp*) yields stable alkyne complexes of the type Cp'2 Ti(η2 -Me3 SiC2 CH2 R) (3: Cp'=Cp, R=SiMe3 ; 5: Cp'=Cp, R=N(SiMe3 )2 ; 6: Cp'=Cp*, R=SiMe3 ) that are not prone to alkyne/allene isomerisation. When reacting alkyne 2 with Cp*2 TiCl2 and Mg formation of the complex Cp*2 Ti(III)(η3 -Me3 SiC2 CH2 ) (7) which displays a propargylic unit coordinated to the TiIII centre takes place. All complexes were fully characterised, the molecular structures for 5, 6, and 7 are discussed.

Redox-Disproportionation of a Decamethyltitanocene(III) Isonitrile Alkynyl Complex.

A mixed decamethyltitanocene(III) isonitrile alkynyl complex (7) was synthesized by the sequential introduction of the isonitrile and alkynyl ligands. Direct synthesis results in the formation of the diamagnetic decamethyltitanocene bis(isonitrile) (2) and bis(alkynyl) (3) complexes. Compound 7 undergoes disproportionation at room temperature to give 2 and 3. All complexes were fully characterized by IR, NMR, and EPR spectroscopy, and mass spectrometry. Molecular structures for complexes 2 and 7 are reported. The stability and reactivity of these complexes are rationalized by DFT computations.

A Model of a Closed Cycle of Water Splitting Using ansa-Titanocene(III/IV) Triflate Complexes.

A series of ansa-titanocene triflate complexes are described as model compounds for the elementary steps of light-driven overall water splitting. Titanocene(III) triflate complexes are readily obtained by reaction of a titanocene source with Yb(OTf)3. Subsequent reactions with water and with/without TEMPO as hydrogen scavenger are studied. The as-obtained titanocene(IV) compounds can be photoreduced to give titanocene(III) triflate complexes, which can undergo further hydrolysis to form a closed catalytic cycle of water splitting. No further degradation of the photoreduced species was observed because of the presence of the OTf group. The stability of the system was evaluated in an experiment with high concentrations of water and TEMPO. X-ray crystallography on all titanocene complexes, EPR and NMR spectroscopy, and DFT were used to support our observations.

The Contrasting Character of Early and Late Transition Metal Fluorides as Hydrogen Bond Acceptors.

The association constants and enthalpies for the binding of hydrogen bond donors to group 10 transition metal complexes featuring a single fluoride ligand (trans-[Ni(F)(2-C5NF4)(PR3)2], R = Et 1a, Cy 1b, trans-[Pd(F)(4-C5NF4)(PCy3)2] 2, trans-[Pt(F){2-C5NF2H(CF3)}(PCy3)2] 3 and of group 4 difluorides (Cp2MF2, M = Ti 4a, Zr 5a, Hf 6a; Cp*2MF2, M = Ti 4b, Zr 5b, Hf 6b) are reported. These measurements allow placement of these fluoride ligands on the scales of organic H-bond acceptor strength. The H-bond acceptor capability ß (Hunter scale) for the group 10 metal fluorides is far greater (1a 12.1, 1b 9.7, 2 11.6, 3 11.0) than that for group 4 metal fluorides (4a 5.8, 5a 4.7, 6a 4.7, 4b 6.9, 5b 5.6, 6b 5.4), demonstrating that the group 10 fluorides are comparable to the strongest organic H-bond acceptors, such as Me3NO, whereas group 4 fluorides fall in the same range as N-bases aniline through pyridine. Additionally, the measurement of the binding enthalpy of 4-fluorophenol to 1a in carbon tetrachloride (-23.5 ± 0.3 kJ mol(-1)) interlocks our study with Laurence's scale of H-bond basicity of organic molecules. The much greater polarity of group 10 metal fluorides than that of the group 4 metal fluorides is consistent with the importance of pπ-dπ bonding in the latter. The polarity of the group 10 metal fluorides indicates their potential as building blocks for hydrogen-bonded assemblies. The synthesis of trans-[Ni(F){2-C5NF3(NH2)}(PEt3)2], which exhibits an extended chain structure assembled by hydrogen bonds between the amine and metal-fluoride groups, confirms this hypothesis.

Design of BODIPY Dyes as Photosensitisers in Multicomponent Catalyst Systems for Light-Driven Hydrogen Production.

A study of visible-light-driven hydrogen production using a multicomponent system consisting of different boron dipyrromethene (BODIPY) dyes, triethylamine and [{Pd(PPh3)Cl2}2] from THF/water mixtures is presented. A trio of meso-mesityl BODIPY dyes display the best activities and long-term stabilities of more than ten days with the 2,6-diiodo derivative showing the best performance.

In situ formation of a MoS2 -based inorganic-organic nanocomposite by directed thermal decomposition.

Nanocomposites based on molybdenum disulfide (MoS2 ) and different carbon modifications are intensively investigated in several areas of applications due to their intriguing optical and electrical properties. Addition of a third element may enhance the functionality and application areas of such nanocomposites. Herein, we present a facile synthetic approach based on directed thermal decomposition of (Ph4 P)2 MoS4 generating MoS2 nanocomposites containing carbon and phosphorous. Decomposition at 250 °C yields a composite material with significantly enlarged MoS2 interlayer distances caused by in situ formation of Ph3 PS bonded to the MoS2 slabs through MoS bonds and (Ph4 P)2 S molecules in the van der Waals gap, as was evidenced by (31) P solid-state NMR spectroscopy. Visible-light-driven hydrogen generation demonstrates a high catalytic performance of the materials.

Crystal structure of tricarbon-yl(N-di-phenyl-phosphanyl-N,N'-diisopropyl-P-phenyl-phospho-nous di-amide-κ(2) P,P')cobalt(I) tetra-carbonyl-cobaltate(-I) toluene 0.25-solvate.

The asymmetric unit of the title compound, [Co(C24H30N2P2)(CO)3][Co(CO)4]·0.25C7H8, consists of two crystallographically independent cations with similar conformations, two anions, and one-half of a toluene mol-ecule disordered about an inversion centre. In the cations, a Co/P/N/P four-membered slightly bent metallacycle is the key structural element. The pendant NH group is not coordinated to the Co(I) atom, which displays a distorted trigonal-bipyramidal coordination geometry. Weak inter-ionic hydrogen bonds are observed between the NH groups and a carbonyl group of the tetrahedral [Co(CO)4](-) anions.

Synthesis and structures of ansa-titanocene complexes with diatomic bridging units for overall water splitting.

The synthesis of a series of ansa-titanocene dichlorides [Cp'2TiCl2] (Cp' = bridged η(5)-tetramethylcyclopentadienyl) and the corresponding titanocene bis(trimethylsilyl)acetylene complexes [Cp'2Ti(η(2)-Me3SiC2SiMe3)] is described. The ethanediyl-bridged complexes [C2H4(C5Me4)2TiCl2] (2-Cl2) and [C2H4(C5Me4)2Ti(η(2)-Me3SiC2SiMe3)] (2-btmsa; btmsa = η(2)-Me3SiC2SiMe3) can be obtained from the hitherto unknown calcocenophane complex [C2H4(C5Me4)2Ca(THF)2] (1). Furthermore, a heterodiatomic bridging unit containing both, a dimethylsilyl and a methylene group was introduced to yield the ansa-titanocene dichloride [Me2SiCH2(C5Me4)2TiCl2] (3-Cl2) and the bis(trimethylsilyl)acetylene complex [Me2SiCH2(C5Me4)2Ti(η(2)-Me3SiC2SiMe3)] (3-btmsa). Besides, tetramethyldisilyl- and dimethylsilyl-bridged metallocene complexes (structural motif 4 and 5, respectively) were prepared. All ansa-titanocene alkyne complexes were reacted with stoichiometric amounts of water; the hydrolysis products were isolated as model complexes for the investigation of the elemental steps of overall water splitting. Compounds 1, 2-btmsa, 2-(OH)2, 3-Cl2, 3-btmsa, 4-(OH)2, 3-alkenyl and 5-alkenyl were characterised by X-ray diffraction analysis.