RESUMO
The long-range periodic atomic arrangement or the lack thereof in solids typically dictates the magnitude and temperature dependence of their lattice thermal conductivity (κlat). Compared to crystalline materials, glasses exhibit a much-suppressed κlat across all temperatures as the phonon mean free path reaches parity with the interatomic distances therein. While the occurrence of such glass-like thermal transport in crystalline solids captivates the scientific community with its fundamental inquiry, it also holds the potential for profoundly impacting the field of thermoelectric energy conversion. Therefore, efficient manipulation of thermal transport and comprehension of the microscopic mechanisms dictating phonon scattering in crystalline solids are paramount. As quantized lattice vibrations (i.e., phonons) drive κlat, atomistic insights into the chemical bonding characteristics are crucial to have informed knowledge about their origins. Recently, it has been observed that within the highly symmetric 'averaged' crystal structures, often there are hidden locally asymmetric atomic motifs (within a few Å), which exert far-reaching influence on phonon transport. Phenomena such as local atomic off-centering, atomic rattling or tunneling, liquid-like atomic motion, site splitting, local ordering, etc., which arise within a few Å scales, are generally found to drastically disrupt the passage of heat carrying phonons. Despite their profound implication(s) for phonon dynamics, they are often overlooked by traditional crystallographic techniques. In this review, we provide a brief overview of the fundamental aspects of heat transport and explore the status quo of innately low thermally conductive crystalline solids, wherein the phonon dynamics is majorly governed by local structural phenomena. We also discuss advanced techniques capable of characterizing the crystal structure at the sub-atomic level. Subsequently, we delve into the emergent new ideas with examples linked to local crystal structure and lattice dynamics. While discussing the implications of the local structure for thermal conductivity, we provide the state-of-the-art examples of high-performance thermoelectric materials. Finally, we offer our viewpoint on the experimental and theoretical challenges, potential new paths, and the integration of novel strategies with material synthesis to achieve low κlat and realize high thermoelectric performance in crystalline solids via local structure designing.
RESUMO
Ferecrystals, a distinctive class of misfit layered compounds, hold significant promise in manipulating the phonon transport owing to their two-dimensional (2D) natural superlattice-type structure and turbostratic (rotational) disorder present between the constituent layers. Integrating these 2D intergrowth structures as nanodomains embedded in a bulk thermoelectric matrix is a formidable challenge in synthetic chemistry, yet offers groundbreaking opportunities for efficient thermoelectrics. Here, we have achieved an exceptionally high thermoelectric figure of merit, zT â¼ 2.2, at 823 K in n-type Ta and Br-codoped SnSe, by successfully incorporating [(SnSe)1.15]7(TaSe2)1 ferecrystals with [110] SnSe//[100] TaSe2 orientation, as nanostructures with modulations in few nm in bulk SnSe solid-state matrix. While the presence of ferecrystal nanostructures induces strong scattering of heat-carrying phonons resulting in an ultralow lattice thermal conductivity (κL) of â¼0.18 W m-1 K-1 at 773 K, the Ta and Br codoping strategy increases the concentration of n-type charge carriers for enhanced electrical conductivity. Our approach provides a new pathway for damping the phonon transport and enhancing the thermoelectric performance in 2D layered materials.
RESUMO
Pauling's third empirical rule deals with the cationic repulsion due to proximity in the face or edge shared polyhedra in a crystal structure, can bring about the lattice instability required to suppress the lattice thermal conductivity (κL). Here, we demonstrate the presence of such instability in TlAgSe, leading to a ultra-low κL of 0.17 W/m.K at 573 K. Our study reveals the instability arising from Ag-Ag repulsion within edge-shared AgSe4 tetrahedra through investigation of the local structure using synchrotron X-ray pair distribution function (PDF) and supported by density functional theory. We observe correlation between weakening in the Ag and the Tl-sublattice, providing direct experimental evidence of Pauling's third rule. The correlated rattling of Ag and Tl induces a highly anharmonic lattice and low energy optical phonons, resulting in suppressed sound velocity and ultralow κL. The electronic origin of soft and anharmonic lattice is the presence of filled antibonding states in the valence band near the Fermi level constructed by Ag(4d)-Se(4p) and Tl(6s)-Se(4p) interactions. This work demonstrates that the evidence of dynamic distortion in a crystal lattice is governed by the third empirical rule given by Pauling, which can act as a potential new strategy for diminishing κL in crystalline solids.
RESUMO
Hybrid layered double perovskites (HLDPs), representing the two-dimensional manifestation of halide double perovskites, have elicited considerable interest owing to their intricate chemical bonding hierarchy and structural diversity. This intensified interest stems from the diverse options available for selecting alternating octahedral coordinated trivalent [M(III)] and monovalent metal centers [M(I)], along with the distinctive nature of the cationic organic amine located between the layers. Here, we have synthesized three new compounds with general formula (R'/R'')4/2M(III)M(I)Cl8; where R'=C3H7NH3 (i.e. 3N) and R''=NH3C4H8NH3 (i.e. 4N4); M(III)=In3+ or Ru3+; M(I)=Cu+ by simple solution-based acid precipitation method. The structural analysis reveals that (4N4)2CuInCl8 and (4N4)2CuRuCl8 adopt the layered Dion Jacobson (DJ) structure, whereas (3N)4CuInCl8 exhibits layered Ruddlesden Popper (RP) structure. The alternative octahedra within the inorganic layer display distortions and tilting. Three compounds show temperature-dependent structural phase transitions where changes in the staking of inorganic layer, extent of octahedral tilting and reorientation of organic spacers with temperature have been noticed. We have achieved ultralow lattice thermal conductivity (κL) in the HLDPs in the 2 to 300â K range, marking a distinctive feature within the realm of HLDP systems. The RP-HLDP compound, (3N)4CuInCl8, demonstrates anisotropy in κL while measured parallel and perpendicular to layer stacking, showcasing ultralow κL of 0.15 Wm-1K-1 at room temperature, which is one of the lowest values obtained among Pb-free metal halide perovskite. The observed ultralow κL in three new HLDPs is attributed to significant lattice anharmonicity arising from the chemical bonding heterogeneity and soft crystal structure, which resulted in low-energy localized optical phonon modes that suppress heat-carrying acoustic phonons.
RESUMO
Efficient solar-driven syngas production (CO+H2 mixture) from CO2 and H2O with a suitable photocatalyst and fundamental understanding of the reaction mechanism are the desired approach towards the carbon recycling process. Herein, we report the design and development of an unique COF-topological quantum material nano-heterostructure, COF@TI with a newly synthesized donor-acceptor based COF and two dimensional (2D) nanosheets of strong topological insulator (TI), PbBi2Te4. The intrinsic robust metallic surfaces of the TI act as electron reservoir, minimising the fast electron-hole recombination process, and the presence of 6s2 lone pairs in Pb2+ and Bi3+ in the TI helps for efficient CO2 binding, which are responsible for boosting overall catalytic activity. In variable ratio of acetonitrile-water (MeCN : H2O) solvent mixture COF@TI produces syngas with different ratios of CO and H2. COF@TI nano-heterostructure enables to produce higher amount of syngas with more controllable ratios of CO and H2 compared to pristine COF. The electron transfer route from COF to TI was realized from Kelvin probe force microscopy (KPFM) analysis, charge density difference calculation, excited state lifetime and photoelectrochemical measurements. Finally, a probable mechanistic pathway has been established after identifying the catalytic sites and reaction intermediates by in situ DRIFTS study and DFT calculation.
RESUMO
Flexible thermoelectric devices of nanomaterials have shown a great potential for applications in wearable to remotely located electronics with desired shapes and geometries. Continuous powering up the low power flexible electronics is a major challenge. We are reporting a flexible thermoelectric module prepared from silver telluride (Ag2 Te) nanowires (NWs), which are chemically transformed from uniquely synthesized and scalable tellurium (Te) NWs. Conducting Ag2 Te NWs composites have shown an ultralow total thermal conductivity ~0.22â W/mK surpassing the bulk melt-grown Ag2 Te ~1.23â W/mK at ~300â K, which is attributed to the nanostructuring of the material. Flexible thermoelectric device consisting of 4 legs (n-type) of Ag2 Te NWs on polyvinylidene fluoride membrane displays a significant output voltage (Voc ) ~2.3â mV upon human touch and Voc ~18â mV at temperature gradient, ΔT ~50â K, which shows the importance of NWs based flexible thermoelectric devices to power up the low power wearable electronics.
RESUMO
Chemical bonding present in crystalline solids has a significant impact on how heat moves through a lattice, and with the right chemical tuning, one can achieve extremely low thermal conductivity. The desire for intrinsically low lattice thermal conductivity (κlat) has gained widespread attention in thermoelectrics, in refractories, and nowadays in photovoltaics and optoelectronics. Here we have synthesized a high-quality crystalline ingot of cubic metal halide CuBiI4 and explored its chemical bonding and thermal transport properties. It exhibits an intrinsically ultralow κlat of â¼0.34-0.28 W m-1 K-1 in the temperature range 4-423 K with an Umklapp crystalline peak of 1.82 W m-1 K-1 at 20 K, which is surprisingly lower than other copper-based halide or chalcogenide materials. The crystal orbital Hamilton population analysis shows that antibonding states generated just below the Fermi level (Ef), which arise from robust copper 3d and iodine 5p interactions, cause copper-iodide bond weakening, which leads to reduction of the elastic moduli and softens the lattice, finally to produce extremely low κlat in CuBiI4. The chemical bonding hierarchy with mixed covalent and ionic interactions present in the complex crystal structure generates significant lattice anharmonicity and a low participation ratio in low-lying optical phonon modes originating mostly from localized copper-iodide bond vibrations. We have obtained experimental evidence of these low-lying modes by low-temperature specific heat capacity measurement as well as Raman spectroscopy. The presence of strong p-d antibonding interactions between copper and iodine leads to anharmonic soft crystal lattice which gives rise to low-energy localized optical phonon bands, suppressing the heat-carrying acoustic phonons to steer intrinsically ultralow κlat in CuBiI4.
RESUMO
Metavalent bonding has attracted immense interest owing to its capacity to impart a distinct property portfolio to materials for advanced functionality. Coupling metavalent bonding to lone pair expression can be an innovative way to propagate lattice anharmonicity from lone pair-induced local symmetry-breaking via the soft p-bonding electrons to achieve long-range phonon dampening in crystalline solids. Motivated by the shared chemical design pool for topological quantum materials and thermoelectrics, we based our studies on a three-dimensional (3D) topological insulator TlBiSe2 that held prospects for 6s2 dual-cation lone pair expression and metavalent bonding to investigate if the proposed hypothesis can deliver a novel thermoelectric material. Herein, we trace the inherent phononic origin of low thermal conductivity in n-type TlBiSe2 to dual 6s2 lone pair-induced intrinsic lattice shearing that strongly suppresses the lattice thermal conductivity to a low value of 1.1-0.4 Wm-1 K-1 between 300 and 715 K. Through synchrotron X-ray pair distribution function and first-principles studies, we have established that TlBiSe2 exists not in a monomorphous R-3m structure but as a distribution of distorted configurations. Via a cooperative movement of the constituent atoms akin to a transverse shearing mode facilitated by metavalent bonding in TlBiSe2, the structure shuttles between various energetically accessible low-symmetry structures. The orbital interactions and ensuing multicentric bonding visualized through Wannier functions augment the long-range transmission of atomic displacement effects in TlBiSe2. With additional point-defect scattering, a κlatt of 0.3 Wm-1 K-1 was achieved in TlBiSeS with a maximum n-type thermoelectric figure of merit (zT) of â¼0.8 at 715 K.
RESUMO
Defect engineering, achieved by precise tuning of the atomic disorder within crystalline solids, forms a cornerstone of structural chemistry. This nuanced approach holds the potential to significantly augment thermoelectric performance by synergistically manipulating the interplay between the charge carrier and lattice dynamics. Here, the current study presents a distinctive investigation wherein the introduction of Hg doping into AgSbTe2 serves to partially curtail structural disorder. This strategic maneuver mitigates potential fluctuations originating from pronounced charge and size disparities between Ag+ and Sb3+, positioned in octahedral sites within the rock salt structure. Hg doping significantly improves the phase stability of AgSbTe2 by restricting the congenital emergence of the Ag2Te minor secondary phase and promotes partial atomic ordering in the cation sublattice. Reduction in atomic disorder coalesced with a complementary modification of electronic structure by Hg doping results in increased carrier mobility. The formation of nanoscale superstructure with sizes (2-5 nm) of the order of phonon mean free path in AgSbTe2 is further promoted by reduced partial disorder, causes enhanced scattering of heat-carrying phonons, and results in a glass-like ultralow lattice thermal conductivity (â¼0.32 W m-1 K-1 at 297 K). Cumulatively, the multifaceted influence of Hg doping, in conjunction with the consequential reduction in disorder, allows achieving a high thermoelectric figure-of-merit, zT, of â¼2.4 at â¼570 K. This result defies conventional paradigms that prioritize increased disorder for optimizing zT.
RESUMO
Comprehension of chemical bonding and its intertwined relation with charge carriers and heat propagation through a crystal lattice is imperative to design compounds for thermoelectric energy conversion. Here, we report the synthesis of large single crystal of new p-type cubic AgSnSbTe3 which shows an innately ultra-low lattice thermal conductivity (κlat ) of 0.47-0.27â Wm-1 â K-1 and a high electrical conductivity (1238 - 800â S cm-1 ) in the temperature range 294-723â K. We investigated the origin of the low κlat by analysing the nature of the chemical bonding and its crystal structure. The interaction between Sn(5â s)/Ag(4d) and Te(5p) orbitals was found to generate antibonding states just below the Fermi level in the electronic band structure, resulting in a softening of the lattice in AgSnSbTe3 . Furthermore, the compound exhibits metavalent bonding which provides highly polarizable bonds with a strong lattice anharmonicity while maintaining the superior electrical conductivity. The electronic band structure exhibits nearly degenerate valence-band maxima that help to achieve a high Seebeck coefficient throughout the measured temperature range and, as a result, the maximum thermoelectric figure of merit reaches to ≈1.2 at 661â K in pristine single crystal of AgSnSbTe3 .
RESUMO
Efficient manipulation of thermal conductivity and fundamental understanding of the microscopic mechanisms of phonon scattering in crystalline solids are crucial to achieve high thermoelectric performance. Thermoelectric energy conversion directly and reversibly converts between heat and electricity and is a promising renewable technology to generate electricity by recovering waste heat and improve solid-state refrigeration. However, a unique challenge in thermal transport needs to be addressed to achieve high thermoelectric performance: the requirement of crystalline materials with ultralow lattice thermal conductivity (κL). A plethora of strategies have been developed to lower κL in crystalline solids by means of nanostructural modifications, introduction of intrinsic or extrinsic phonon scattering centers with tailored shape and dimension, and manipulation of defects and disorder. Recently, intrinsic local lattice distortion and lattice anharmonicity originating from various mechanisms such as rattling, bonding heterogeneity, and ferroelectric instability have found popularity. In this Perspective, we outline the role of manipulation of chemical bonding and structural chemistry on thermal transport in various high-performance thermoelectric materials. We first briefly outline the fundamental aspects of κL and discuss the current status of the popular phonon scattering mechanisms in brief. Then we discuss emerging new ideas with examples of crystal structure and lattice dynamics in exemplary materials. Finally, we present an outlook for focus areas of experimental and theoretical challenges, possible new directions, and integrations of novel techniques to achieve low κL in order to realize high-performance thermoelectric materials.
RESUMO
Understanding the correlations of both the local and global structures with lattice dynamics is critical for achieving low lattice thermal conductivity (κlat ) in crystalline materials. Herein, we demonstrate local cationic off-centring within the global rock-salt structure of AgSbSe2 by using synchrotron X-ray pair distribution function analysis and unravel the origin of its ultralow κlat ≈0.4â W mK-1 at 300â K. The cations are locally off-centered along the crystallographic ⟨ 100 ⟩ direction by about ≈0.2â Å, which averages out as the rock-salt structure on the global scale. Phonon dispersion obtained by density functional theory (DFT) shows weak instabilities that cause local off-centering distortions within an anharmonic double-well potential. The local structural distortion arises from the stereochemically active 5s2 lone pairs of Sb. Our findings open an avenue for understanding how the local structure influences the phonon transport and facilitates the design of next-generation crystalline materials with tailored thermal properties.
RESUMO
Intrinsically low lattice thermal conductivity (κlat ) while maintaining the high carrier mobility (µ) is of the utmost importance for thermoelectrics. Topological insulators (TI) can possess high µ due to the metallic surface states. TIs with heavy constituents and layered structure can give rise to high anharmonicity and are expected to show low κlat . Here, we demonstrate that Bi1.1 Sb0.9 Te2 S (BSTS), which is a 3D bulk TI, exhibits ultra-low κlat of 0.46â Wm-1 K-1 along with high µ of ≈401â cm2 â V-1 s-1 . Sound velocity measurements and theoretical calculations suggest that chemical bonding hierarchy and high anharmonicity play a crucial role behind such ultra-low κlat . BSTS possesses low energy optical phonons which strongly couple with the heat carrying acoustic phonons leading to ultra-low κlat . Further, Cl has been doped at the S site of BSTS which increases the electron concentration and reduces the κlat resulting in a promising n-type thermoelectric figure of merit (zT) of ≈0.6 at 573â K.
RESUMO
The structural transformation generally occurs from lower symmetric to higher symmetric structure on heating. However, the formation of locally broken asymmetric phases upon warming has been evidenced in PbQ (Q = S, Se, Te), a rare phenomenon called emphanisis, which has significant effect on their thermal transport and thermoelectric properties. (SnSe)0.5(AgSbSe2)0.5 crystallizes in rock-salt cubic average structure, with the three cations occupying the same Wycoff site (4a) and Se in the anion position (Wycoff site, 4b). Using synchrotron X-ray pair distribution function (X-PDF) analysis, herein, we show the gradual deviation of the local structure of (SnSe)0.5(AgSbSe2)0.5 from the overall cubic rock-salt structure with warming, resembling emphanisis. The local structural analysis indicates that Se atoms remain in off-centered position by a magnitude of â¼0.25 Å at 300 K along the [111] direction and the magnitude of this distortion is found to increase with temperature resulting in three short and three long M-Se bonds (M = Sn/Ag/Sb) within the average rock-salt lattice. This hinders phonon propagation and lowers the lattice thermal conductivity (κlat) to 0.49-0.39 W/(m·K) in the 295-725 K range. Analysis of phonons based on density functional theory (DFT) reveals significant soft modes with high anharmonicity which involve localized Ag and Se vibrations primarily. Emphanisis induced low κlat and favorable electronic structure with multiple valence band extrema within close energy concurrently give rise to a promising thermoelectric figure of merit (zT) of 1.05 at 706 K in p-type carrier optimized Ge doped new rock-salt phase of (SnSe)0.5(AgSbSe2)0.5.
RESUMO
Rapid industrialization has led to the release of hexavalent chromium (Cr(VI)), a "Class A" human carcinogen, mutagen, and teratogen in biological systems. Current adsorbents like anionic exchange resins and metal-organic frameworks can remove harmful heavy metal oxyanions from water but are not stable in a broad pH range, suffer from selectivity, and cannot capture them from trace values below the tolerance limits given by the U.S. EPA (100 ppb) and WHO (50 ppb). Herein, we have synthesized nature-inspired coral-like three-dimensional hierarchical structures of [Co0.79Al0.21(OH)2(CO3)0.11]·mH2O (CoAl-LDH) that sets a new benchmark for sequestering oxyanions of Cr(VI). CoAl-LDH shows a broad pH working range (1.93-12.22), high selectivity toward saturated water samples containing monovalent (Cl-, F-, Br-, and NO3-) and divalent (SO42-) anions with fast kinetics (reaches equilibrium within a minute), high capacity (93.4 ± 7.8 mg g-1), and high distribution coefficient of 1.09 × 106 mL g-1. Unlike other materials, it can decrease Cr(VI) concentration up to 0.012 ppb. This high selectivity for Cr(VI) is linked to the weak bonding interaction between Cr2O72- and brucite-like layers, as revealed from thermogravimetric and infrared spectroscopy. With these remarkable features coupled with low cost and an environmentally friendly nature, we have also designed an anion exchange column that can remove >99% Cr(VI) with just 1 wt % of CoAl-LDH and 99 wt % of sand and is a prominent candidate for the elimination of Cr(VI) from industrial effluents.
Assuntos
Alumínio/química , Monóxido de Carbono/química , Cromo/análise , Cobalto/química , Hidróxidos/química , Poluentes Químicos da Água/análise , Adsorção , Concentração de Íons de Hidrogênio , Cinética , Tamanho da Partícula , Propriedades de Superfície , Água/químicaRESUMO
Analogous to 2D layered transition-metal dichalcogenides, the TlSe family of quasi-one dimensional chain materials with the Zintl-type structure exhibits novel phenomena under high pressure. In the present work, we have systematically investigated the high-pressure behavior of TlInTe2 using Raman spectroscopy, synchrotron X-ray diffraction (XRD), and transport measurements, in combination with first principles crystal structure prediction (CSP) based on evolutionary approach. We found that TlInTe2 undergoes a pressure-induced semiconductor-to-semimetal transition at 4 GPa, followed by a superconducting transition at 5.7 GPa (with Tc = 3.8 K). An unusual giant phonon mode (Ag) softening appears at â¼10-12 GPa as a result of the interaction of optical phonons with the conduction electrons. The high-pressure XRD and Raman spectroscopy studies reveal that there is no structural phase transitions observed up to the maximum pressure achieved (33.5 GPa), which is in agreement with our CSP calculations. In addition, our calculations predict two high-pressure phases above 35 GPa following the phase transition sequence as I4/mcm (B37) â Pbcm â Pm3Ì m (B2). Electronic structure calculations suggest Lifshitz (L1 & L2-type) transitions near the superconducting transition pressure. Our findings on TlInTe2 open up a new avenue to study unexplored high-pressure novel phenomena in TlSe family induced by Lifshitz transition (electronic driven), giant phonon softening, and electron-phonon coupling.
RESUMO
SnTe, a structural analogue of champion thermoelectric (TE) material PbTe, has recently attracted wide attention for TE energy conversion. Herein, we demonstrate a co-doping strategy to improve the TE performance of SnTe via simultaneous modulation of electronic structure and phonon transport. The electrical transport is optimized by 3â mol % Ag doping in self-compensated SnTe (i.e., Sn1.03 Te). Further, Mg doping in SnAg0.03 Te resulted in highly converged valence bands, which enhanced the Seebeck coefficient markedly. The energy gap between two uppermost valence bands (ΔEv ) decreases to 0.10â eV in Sn0.92 Ag0.03 Mg0.08 Te compared to 0.35â eV in pristine SnTe. The optimized p-type carrier concentration and highly converged valence bands gave a high power factor of ca. 27â µW cm-1 K-2 at 865â K in Sn0.92 Ag0.03 Mg0.08 Te. The lattice thermal conductivity of Sn0.92 Ag0.03 Mg0.08 Te reached to an ultra-low value of ≈0.23â W m-1 K-1 at 865â K due to the formation of MgTe nanoprecipitates in SnTe matrix. These combined effects resulted in a high TE figure of merit, zT≈1.55 at 865â K in Sn0.92 Ag0.03 Mg0.08 Te.
RESUMO
Here, we present lattice dynamics associated with the local chemical bonding hierarchy in Zintl compound TlInTe2 , which cause intriguing phonon excitations and strongly suppress the lattice thermal conductivity to an ultralow value (0.46-0.31â W m-1 K-1 ) in the 300-673â K. We established an intrinsic rattling nature in TlInTe2 by studying the local structure and phonon vibrations using synchrotron X-ray pair distribution function (PDF) (100-503â K) and inelastic neutron scattering (INS) (5-450â K), respectively. We showed that while 1D chain of covalently bonded I n T e 2 n - n transport heat with Debye type phonon excitation, ionically bonded Tl rattles with a frequency ca. 30â cm-1 inside distorted Thompson cage formed by I n T e 2 n - n . This highly anharmonic Tl rattling causes strong phonon scattering and consequently phonon lifetime reduces to ultralow value of ca. 0.66(6)â ps, resulting in ultralow thermal conductivity in TlInTe2 .
RESUMO
Orthorhombic GeSe is a promising thermoelectric material. However, large band gap and strong covalent bonding result in a low thermoelectric figure of merit, zT≈0.2. Here, we demonstrate a maximum zT≈1.35 at 627â K in p-type polycrystalline rhombohedral (GeSe)0.9 (AgBiTe2 )0.1 , which is the highest value reported among GeSe based materials. The rhombohedral phase is stable in ambient conditions for x=0.8-0.29 in (GeSe)1-x (AgBiTe2 )x . The structural transformation accompanies change from covalent bonding in orthorhombic GeSe to metavalent bonding in rhombohedral (GeSe)1-x (AgBiTe2 )x . (GeSe)0.9 (AgBiTe2 )0.1 has closely lying primary and secondary valence bands (within 0.25-0.30â eV), which results in high power factor 12.8â µW cm-1 K-2 at 627â K. It also exhibits intrinsically low lattice thermal conductivity (0.38â Wm-1 K-1 at 578â K). Theoretical phonon dispersion calculations reveal vicinity of a ferroelectric instability, with large anomalous Born effective charges and high optical dielectric constant, which, in concurrence with high effective coordination number, low band gap and moderate electrical conductivity, corroborate metavalent bonding in (GeSe)0.9 (AgBiTe2 )0.1 . We confirmed the presence of low energy phonon modes and local ferroelectric domains using heat capacity measurement (3-30â K) and switching spectroscopy in piezoresponse force microscopy, respectively.
RESUMO
Thermoelectric (TE) energy conversion demands high performance crystalline inorganic solids that exhibit ultralow thermal conductivity, high mechanical stability, and good TE device properties. Pb-free germanium telluride (GeTe)-based material has recently attracted significant attention in TE power generation in mid temperatures, but pristine GeTe possesses significantly higher lattice thermal conductivity (κlatt) compared to that of its theoretical minimum (κmin) of â¼0.3 W/mK. Herein, we have demonstrated the reduction of κlatt of (GeTe)1-2x(SnSe)x(SnS)x very near to its κmin. The (GeTe)1-2x(SnSe)x(SnS)x system behaves as a coexistence of point-defect rich solid solution and phase separation. Initially, the addition of equimolar SnSe and SnS in the GeTe reduces the κlatt by effective phonon scattering because of the excess point defects and rich microstructures. In the second step, introduction of Sb-doping leads to additional phonon scattering centers and optimizes the p-type carrier concentration. Notably, 10 mol % Sb-doped (GeTe)0.95(SnSe)0.025(SnS)0.025 exhibits ultralow κlatt of â¼0.30 W/mK at 300 K. Subsequently, 10 mol % Sb-doped (GeTe)0.95(SnSe)0.025(SnS)0.025 exhibits a high TE figure of merit (zT) of â¼1.9 at 710 K. The high-performance sample exhibits a Vickers microhardness (mechanical stability) value of â¼194 HV that is significantly higher compared to the pristine GeTe and other state-of-the-art thermoelectric materials. Further, we have achieved a high output power, â¼150 mW for the temperature difference of 462 K, in single leg TE device based on 10 mol % Sb-doped (GeTe)0.95(SnSe)0.025(SnS)0.025.