RESUMO
Reaching the goal of developing an insensitive high-energy molecule (IHEM) is a major challenge. In this study, 3,5-diamino-6-hydroxy-2-oxide-4-nitropyrimidone (IHEM-1) was synthesized in one step from 2,4,6-triamino-5-nitropyrimidine-1,3-dioxide hydrate (ICM-102 hydrate). The density of compound IHEM-1 is 1.95 g cm-3 with a decomposition temperature of 271 °C. Its detonation velocity and pressure are 8660 m s-1 and 33.64 GPa, respectively, which are far superior to the detonation performance of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), while its sensitivity is identical with that of TATB. In addition, four derivatives (1a, chloride; 1b, nitrate; 1c, perchlorate; and 1d, dinitramide) were prepared on the basis of the weak base site (N-O group) and show excellent energetic properties. By combining a series of advantages, including simple preparation, high yield, high density, very low solubility in aqueous solution, high thermostability, insensitivity, and excellent detonation performance, IHEM-1 approaches an ideal insensitive high-energy molecule. Compounds 1b-1d are also competitive as new high-energy-density materials.
RESUMO
Dramatic growth of lithium dendrite, structural deterioration of LiCoO2 (LCO) cathode at high voltages, and unstable electrode/electrolyte interfaces pose significant obstacles to the practical application of high-energy-density LCO||Li batteries. In this work, a novel eutectogel electrolyte is developed by confining the nonflammable eutectic electrolyte in a polymer matrix. The eutectogel electrolyte can construct a robust solid electrolyte interphase (SEI) with inorganic-rich LiF and Li3N, contributing to a uniform Li deposition. Besides, the severe interface side reactions between LCO cathode and electrolyte can be retarded with an in situ formed protective layer. Correspondingly, Li||Li symmetrical cells achieve highly reversible Li plating/stripping over 1000 h. The LCO||Li full cell can maintain 72.5% capacity after 1500 cycles with a decay rate of only 0.018% per cycle at a high charging voltage of 4.45 V. Moreover, the well-designed eutectogel electrolyte can even enable the stable operation of LCO at an extremely high cutoff voltage of 4.6 V. This work introduces a promising avenue for the advancement of eutectogel electrolytes, the nonflammable nature and well-regulated interphase significantly push forward the future application of lithium metal batteries and high-voltage utilization of LCO cathode.
RESUMO
The development of electrolytes with high safety, high ionic conductivity, and the ability to inhibit lithium dendrites growth is crucial for the fabrication of high-energy-density lithium metal batteries. In this study, a ternary eutectic electrolyte is designed with LiTFSI (TFSI = bis(trifluoromethanesulfonyl)imide), butyrolactam (BL), and succinonitrile (SN). This electrolyte exhibits a high ion conductivity, nonflammability, and a wide electrochemical window. The competitive solvation effect among SN, BL, and Li+ reduces the viscosity and improves the stability of the eutectic electrolyte. The preferential coordination of BL toward Li+ facilitates the formation of stable solid electrolyte interphase films, leading to homogeneous and dendrite-free Li plating. As expected, the LiFePO4/Li cell with this ternary eutectic electrolyte delivers a high capacity retention of 90% after 500 cycles at 2 C and an average Coulombic efficiency of 99.8%. Moreover, Ni-rich LiNi0.8Co0.1Al0.1O2/Li and LiNi0.8Co0.1Mn0.1O2/Li cells based on the modified ternary eutectic electrolyte achieve an outstanding cycling performance. This study provides insights for understanding and designing better electrolytes for lithium metal batteries and analogous sodium/potassium metal batteries.
RESUMO
HIGHLIGHTS: A novel amide-based nonflammable electrolyte is proposed. The formation mechanism and solvation chemistry are investigated by molecular dynamics simulations and density functional theory. An inorganic/organic-rich solid electrolyte interphase with an abundance of LiF, Li3N and Li-N-C is in situ formed, leading to spherical lithium deposition. The amide-based electrolyte can enable stable cycling performance at room temperature and 60 â. The formation of lithium dendrites and the safety hazards arising from flammable liquid electrolytes have seriously hindered the development of high-energy-density lithium metal batteries. Herein, an emerging amide-based electrolyte is proposed, containing LiTFSI and butyrolactam in different molar ratios. 1,1,2,2-Tetrafluoroethyl-2,2,3,3-tetrafluoropropylether and fluoroethylene carbonate are introduced into the amide-based electrolyte as counter solvent and additives. The well-designed amide-based electrolyte possesses nonflammability, high ionic conductivity, high thermal stability and electrochemical stability (> 4.7 V). Besides, an inorganic/organic-rich solid electrolyte interphase with an abundance of LiF, Li3N and Li-N-C is in situ formed, leading to spherical lithium deposition. The formation mechanism and solvation chemistry of amide-based electrolyte are further investigated by molecular dynamics simulations and density functional theory. When applied in Li metal batteries with LiFePO4 and LiMn2O4 cathode, the amide-based electrolyte can enable stable cycling performance at room temperature and 60 â. This study provides a new insight into the development of amide-based electrolytes for lithium metal batteries.
RESUMO
Acute organophosphorus pesticide poisoning (AOPP) is a worldwide health concern that has threatened human lives for decades, which attacks acetylcholinesterase (AChE) and causes nervous system disorders. Classical treatment options are associated with short in vivo half-life and side effects. As a potential alternative, delivery of mammalian-derived butyrylcholinesterase (BChE) offers a cost-effective way to block organophosphorus attack on acetylcholinesterase, a key enzyme in the neurotransmitter cycle. Yet the use of exotic BChE as a prophylactic or therapeutic agent is compromised by short plasma residence, immune response and unfavorable biodistribution. To overcome these obstacles, BChE nanodepots (nBChE) composed of a BChE core/polymorpholine shell structure were prepared via in situ polymerization, which showed enhanced stability, prolonged plasma circulation, attenuated antigenicity and reduced accumulation in non-targeted tissues. In vivo administration of nBChE pre- or post-organophosphorus exposure in a BALB/C mouse model resulted in potent prophylactic and therapeutic efficiency. To our knowledge, this is the first systematic delivery of non-human BChE to tackle AOPP. In addition, this work also opens up a new avenue for real applications in both research and clinical settings to cope with acute intoxication-related diseases.
Assuntos
Butirilcolinesterase/metabolismo , Nanopartículas/metabolismo , Intoxicação por Organofosfatos/metabolismo , Compostos Organofosforados/metabolismo , Células 3T3-L1 , Animais , Butirilcolinesterase/administração & dosagem , Butirilcolinesterase/química , Células Cultivadas , Feminino , Células HEK293 , Humanos , Injeções Intravenosas , Camundongos , Camundongos Endogâmicos BALB C , Nanopartículas/administração & dosagem , Nanopartículas/química , Compostos Organofosforados/química , Compostos Organofosforados/farmacocinética , Tamanho da Partícula , Propriedades de Superfície , Distribuição TecidualRESUMO
The separation of ethane and ethylene is an important segment in the purification of chemical raw materials in industrial production. However, due to their similar physical and chemical properties, the separation of C2 H6 /C2 H4 is challenging. Herein, we report the selective adsorption of ethane over ethylene by a microporous metal-organic framework with nonpolar aromatic rings constructed channels, [Co1.5 (TATB)(H2 O)0.5 ] â 5DMA â 3H2 O (Co-TATB, H3 TATB=4,4',4''-(s-triazine-2,4,6-triyl) tribenzoic acid). This compound showed a higher ethane capacity than that of ethylene, and a low adsorption enthalpy of ethane only of 19.4â kJ mol-1 . Further, the dynamic breakthrough experimental confirmed that Co-TATB can selectively adsorb ethane from ethane/ethylene separation.