Concentrator photovoltaic module architectures with capabilities for capture and conversion of full global solar radiation.

Emerging classes of concentrator photovoltaic (CPV) modules reach efficiencies that are far greater than those of even the highest performance flat-plate PV technologies, with architectures that have the potential to provide the lowest cost of energy in locations with high direct normal irradiance (DNI). A disadvantage is their inability to effectively use diffuse sunlight, thereby constraining widespread geographic deployment and limiting performance even under the most favorable DNI conditions. This study introduces a module design that integrates capabilities in flat-plate PV directly with the most sophisticated CPV technologies, for capture of both direct and diffuse sunlight, thereby achieving efficiency in PV conversion of the global solar radiation. Specific examples of this scheme exploit commodity silicon (Si) cells integrated with two different CPV module designs, where they capture light that is not efficiently directed by the concentrator optics onto large-scale arrays of miniature multijunction (MJ) solar cells that use advanced III-V semiconductor technologies. In this CPV+ scheme ("+" denotes the addition of diffuse collector), the Si and MJ cells operate independently on indirect and direct solar radiation, respectively. On-sun experimental studies of CPV+ modules at latitudes of 35.9886° N (Durham, NC), 40.1125° N (Bondville, IL), and 38.9072° N (Washington, DC) show improvements in absolute module efficiencies of between 1.02% and 8.45% over values obtained using otherwise similar CPV modules, depending on weather conditions. These concepts have the potential to expand the geographic reach and improve the cost-effectiveness of the highest efficiency forms of PV power generation.

Broadband Sensitization of Lanthanide Emission with Indium Phosphide Quantum Dots for Visible to Near-Infrared Downshifting.

Semiconductor quantum dot (QD)-sensitized lanthanide ions hold great promise in producing a broadly absorbing and sharply emitting luminophore, but their synthesis has proven to be difficult. We report the first synthesis of core/shell/shell InP/Ln xY1- xF3/ShF3 (Ln = Yb, Nd; Sh = Lu, Y) nanocrystals that exhibit a broad visible absorption coupled to a sharp near-infrared emission. Additionally, this is the first report of Nd being coupled to a QD absorber. We characterize the system with a variety of electron microscopy and X-ray techniques that prove this unique structure. Optical measurements confirm the correlation of the Ln3+ emission to the QD absorption, while the presence of a trap-state emission gives a clue as to the mechanism of energy transfer between the dot and the lanthanide.

Balancing the Hydrogen Evolution Reaction, Surface Energetics, and Stability of Metallic MoS2 Nanosheets via Covalent Functionalization.

We modify the fundamental electronic properties of metallic (1T phase) nanosheets of molybdenum disulfide (MoS2) through covalent chemical functionalization, and thereby directly influence the kinetics of the hydrogen evolution reaction (HER), surface energetics, and stability. Chemically exfoliated, metallic MoS2 nanosheets are functionalized with organic phenyl rings containing electron donating or withdrawing groups. We find that MoS2 functionalized with the most electron donating functional group (p-(CH3CH2)2NPh-MoS2) is the most efficient catalyst for HER in this series, with initial activity that is slightly worse compared to the pristine metallic phase of MoS2. The p-(CH3CH2)2NPh-MoS2 is more stable than unfunctionalized metallic MoS2 and outperforms unfunctionalized metallic MoS2 for continuous H2 evolution within 10 min under the same conditions. With regards to the entire studied series, the overpotential and Tafel slope for catalytic HER are both directly correlated with the electron donating strength of the functional group. The results are consistent with a mechanism involving ground-state electron donation or withdrawal to/from the MoS2 nanosheets, which modifies the electron transfer kinetics and catalytic activity of the MoS2 nanosheet. The functional groups preserve the metallic nature of the MoS2 nanosheets, inhibiting conversion to the thermodynamically stable semiconducting state (2H) when mildly annealed in a nitrogen atmosphere. We propose that the electron density and, therefore, reactivity of the MoS2 nanosheets are controlled by the attached functional groups. Functionalizing nanosheets of MoS2 and other transition metal dichalcogenides provides a synthetic chemical route for controlling the electronic properties and stability within the traditionally thermally unstable metallic state.

Tracking Nanoparticle Diffusion and Interaction during Self-Assembly in a Liquid Cell.

Nanoparticle self-assembly has been well studied theoretically, but it remains challenging to directly observe and quantify individual nanoparticle interactions. With our custom image analysis method, we track the trajectories of nanoparticle movement with high precision from a stack of relatively noisy images obtained using liquid cell transmission electron microscopy. In a time frame of minutes, Pt-Fe nanoparticles self-assembled into a loosely packed hcp lattice. The energetics and stability of the dynamic assembly were studied quantitatively. From velocity and diffusion measurements, we experimentally determined the magnitude of forces between single particles and the related physical properties. The results illustrate that long-range anisotropic forces drive the formation of chains, which then clump and fold to maximize close range van der Waals interactions.

Essentially Trap-Free CsPbBr3 Colloidal Nanocrystals by Postsynthetic Thiocyanate Surface Treatment.

We demonstrate postsynthetic modification of CsPbBr3 nanocrystals by a thiocyanate salt treatment. This treatment improves the quantum yield of both freshly synthesized (PLQY ≈ 90%) and aged nanocrystals (PLQY ≈ 70%) to within measurement error (2-3%) of unity, while simultaneously maintaining the shape, size, and colloidal stability. Additionally, the luminescence decay kinetics transform from multiexponential decays typical of nanocrystalline semiconductors with a distribution of trap sites, to a monoexponential decay, typical of single energy level emitters. Thiocyanate only needs to access a limited number of CsPbBr3 nanocrystal surface sites, likely representing under-coordinated lead atoms on the surface, in order to have this effect.

Precise Tuning of Surface Quenching for Luminescence Enhancement in Core-Shell Lanthanide-Doped Nanocrystals.

Lanthanide-doped nanocrystals are of particular interest for the research community not only due to their ability to shape light by downshifting, quantum cutting, and upconversion but also because novel optical properties can be found by the precise engineering of core-shell nanocrystals. Because of the large surface area-to-volume ratio of nanocrystals, the luminescence is typically suppressed by surface quenching. Here, we demonstrate a mechanism that exploits surface quenching processes to improve the luminescence of our core-shell lanthanide-doped nanocrystals. By carefully tuning the shell thickness of inert ß-NaLuF4 around ß-NaYF4 nanocrystals doped with Yb3+ and Er3+, we unravel the relationship between quantum yield and shell thickness, and quantify surface quenching rates for the relevant Er3+ and Yb3+ energy levels. This enhanced understanding of the system's dynamics allowed us to design nanocrystals with a surface quenching-assisted mechanism for bright NIR to NIR downshifting with a distinctive efficiency peak for an optimized shell thickness.

Surface- vs Diffusion-Limited Mechanisms of Anion Exchange in CsPbBr3 Nanocrystal Cubes Revealed through Kinetic Studies.

Ion-exchange transformations allow access to nanocrystalline materials with compositions that are inaccessible via direct synthetic routes. However, additional mechanistic insight into the processes that govern these reactions is needed. We present evidence for the presence of two distinct mechanisms of exchange during anion exchange in CsPbX3 nanocrystals (NCs), ranging in size from 6.5 to 11.5 nm, for transformations from CsPbBr3 to CsPbCl3 or CsPbI3. These NCs exhibit bright luminescence throughout the exchange, allowing their optical properties to be observed in real time, in situ. The iodine exchange presents surface-reaction-limited exchanges allowing all anionic sites within the NC to appear chemically identical, whereas the chlorine exchange presents diffusion-limited exchanges proceeding through a more complicated exchange mechanism. Our results represent the first steps toward developing a microkinetic description of the anion exchange, with implications not only for understanding the lead halide perovskites but also for nanoscale ion exchange in general.

Charge percolation pathways guided by defects in quantum dot solids.

Charge hopping and percolation in quantum dot (QD) solids has been widely studied, but the microscopic nature of the percolation process is not understood or determined. Here we present the first imaging of the charge percolation pathways in two-dimensional PbS QD arrays using Kelvin probe force microscopy (KPFM). We show that under dark conditions electrons percolate via in-gap states (IGS) instead of the conduction band, while holes percolate via valence band states. This novel transport behavior is explained by the electronic structure and energy level alignment of the individual QDs, which was measured by scanning tunneling spectroscopy (STS). Chemical treatments with hydrazine can remove the IGS, resulting in an intrinsic defect-free semiconductor, as revealed by STS and surface potential spectroscopy. The control over IGS can guide the design of novel electronic devices with impurity conduction, and photodiodes with controlled doping.

Designing Janus Ligand Shells on PbS Quantum Dots using Ligand-Ligand Cooperativity.

We present a combined experimental and theoretical study of ligand-ligand cooperativity during X-type carboxylate-to-carboxylate ligand exchange reactions on PbS quantum dot surfaces. We find that the ligand dipole moment (varied through changing the substituents on the benzene ring of cinnamic acid derivatives) impacts the ligand-exchange isotherms; in particular, ligands with large electron withdrawing character result in a sharper transition from an oleate-dominated ligand shell to a cinnamate-dominated ligand shell. We developed a two-dimensional lattice model to simulate the ligand-exchange isotherms that accounts for the difference in ligand binding energy as well as ligand-ligand cooperativity. Our model shows that ligands with larger ligand-ligand coupling energy exhibit sharper isotherms indicating an order-disorder phase transition. Finally, we developed an anisotropic Janus ligand shell by taking advantage of the ligand-ligand cooperative ligand exchanges. We monitored the Janus ligand shell using 19F nuclear magnetic resonance, showing that when the ligand-ligand coupling energy falls within the order region of the phase diagram, Janus ligand shells can be constructed.

Redefining near-unity luminescence in quantum dots with photothermal threshold quantum yield.

A variety of optical applications rely on the absorption and reemission of light. The quantum yield of this process often plays an essential role. When the quantum yield deviates from unity by significantly less than 1%, applications such as luminescent concentrators and optical refrigerators become possible. To evaluate such high performance, we develop a measurement technique for luminescence efficiency with sufficient accuracy below one part per thousand. Photothermal threshold quantum yield is based on the quantization of light to minimize overall measurement uncertainty. This technique is used to guide a procedure capable of making ensembles of near-unity emitting cadmium selenide/cadmium sulfide (CdSe/CdS) core-shell quantum dots. We obtain a photothermal threshold quantum yield luminescence efficiency of 99.6 ± 0.2%, indicating nearly complete suppression of nonradiative decay channels.

Ultrasensitive photodetectors exploiting electrostatic trapping and percolation transport.

The sensitivity of semiconductor photodetectors is limited by photocarrier recombination during the carrier transport process. We developed a new photoactive material that reduces recombination by physically separating hole and electron charge carriers. This material has a specific detectivity (the ability to detect small signals) of 5 × 10(17) Jones, the highest reported in visible and infrared detectors at room temperature, and 4-5 orders of magnitude higher than that of commercial single-crystal silicon detectors. The material was fabricated by sintering chloride-capped CdTe nanocrystals into polycrystalline films, where Cl selectively segregates into grain boundaries acting as n-type dopants. Photogenerated electrons concentrate in and percolate along the grain boundaries-a network of energy valleys, while holes are confined in the grain interiors. This electrostatic field-assisted carrier separation and percolation mechanism enables an unprecedented photoconductive gain of 10(10) e(-) per photon, and allows for effective control of the device response speed by active carrier quenching.

Molecular Oxygen Induced in-Gap States in PbS Quantum Dots.

Artificial solids composed of semiconductor quantum dots (QDs) are being developed for large-area electronic and optoelectronic applications, but these materials often have defect-induced in-gap states (IGS) of unknown chemical origin. Here we performed scanning probe based spectroscopic analysis and density functional theory calculations to determine the nature of such states and their electronic structure. We found that IGS near the valence band occur frequently in the QDs except when treated with reducing agents. Calculations on various possible defects and chemical spectroscopy revealed that molecular oxygen is most likely at the origin of these IGS. We expect this impurity-induced deep IGS to be a common occurrence in ionic semiconductors, where the intrinsic vacancy defects either do not produce IGS or produce shallow states near band edges. Ionic QDs with surface passivation to block impurity adsorption are thus ideal for high-efficiency optoelectronic device applications.

Luminescent solar concentration with semiconductor nanorods and transfer-printed micro-silicon solar cells.

We utilize CdSe/CdS seeded nanorods as a tunable lumophore for luminescent concentration. Transfer-printed, ultrathin crystalline Si solar cells are embedded directly into the luminescent concentrator, allowing the study of luminescent concentrators with an area over 5000 times the area of the solar cell. By increasing the size of the CdS rod with respect to the luminescent CdSe seed, the reabsorption of propagating photons is dramatically reduced. At long luminescence propagation distances, this reduced reabsorption can overcome the diminished quantum yield inherent to the larger semiconductor structures, which is studied with lifetime spectroscopy. A Monte Carlo ray tracing model is developed to explain the performance of the luminescent concentrator and is then used as a design tool to determine the effect of luminescence trapping on the concentration of light using both CdSe/CdS nanorods and a model organic dye. We design an efficient luminescence trapping structure that should allow the luminescent concentrator based on CdSe/CdS nanorods to operate in the high-concentration regime.