A Systematic Review on Commercially Available Integrated Systems for Forensic DNA Analysis.

This systematic review describes and discusses three commercially available integrated systems for forensic DNA analysis, i.e., ParaDNA, RapidHIT, and ANDE. A variety of aspects, such as performance, time-to-result, ease-of-use, portability, and costs (per analysis run) of these three (modified) rapid DNA analysis systems, are considered. Despite their advantages and developmental progress, major steps still have to be made before rapid systems can be broadly applied at crime scenes for full DNA profiling. Aspects in particular that need (further) improvement are portability, performance, the possibility to analyze a (wider) variety of (complex) forensic samples, and (cartridge) costs. Moreover, steps forward regarding ease-of-use and time-to-result will benefit the broader use of commercial rapid DNA systems. In fact, it would be a profit if rapid DNA systems could be used for full DNA profile generation as well as indicative analyses that can give direction to forensic investigators which will speed up investigations.

Use of Lateral Flow Assays in Forensics.

Already for some decades lateral flow assays (LFAs) are 'common use' devices in our daily life. Also, for forensic use LFAs are developed, such as for the analysis of illicit drugs and DNA, but also for the detection of explosives and body fluid identification. Despite their advantages, including ease-of-use, LFAs are not yet frequently applied at a crime scene. This review describes (academic) developments of LFAs for forensic applications, focusing on biological and chemical applications, whereby the main advantages and disadvantages of LFAs for the different forensic applications are summarized. Additionally, a critical review is provided, discussing why LFAs are not frequently applied within the forensic field and highlighting the steps that are needed to bring LFAs to the forensic market.

Evaluation of a Commercial Electronic Nose Based on Carbon Nanotube Chemiresistors.

Recently a hand-held, carbon-nanotube-based electronic nose became available on the market. Such an electronic nose could be interesting for applications in the food industry, health monitoring, environmental monitoring, and security services. However, not much is known about the performance of such an electronic nose. In a series of measurements, the instrument was exposed to low ppm vapor concentrations of four volatile organic compounds with different scent profiles and polarities. Detection limits, linearity of response, repeatability, reproducibility, and scent patterns were determined. The results indicate detection limits in the range of 0.1-0.5 ppm and a linear signal response in the range of 0.5-8.0 ppm. The repeatability of the scent patterns at compound concentrations of 2 ppm allowed the identification of the tested volatiles based on their scent pattern. However, the reproducibility was not sufficient, since different scent profiles were produced on different measurement days. In addition, it was noted that the response of the instrument diminished over time (over several months) possibly by sensor poisoning. The latter two aspects limit the use of the current instrument and make future improvements necessary.

Massively parallel sequencing techniques for forensics: A review.

DNA sequencing, starting with Sanger's chain termination method in 1977 and evolving into the next generation sequencing (NGS) techniques of today that employ massively parallel sequencing (MPS), has become essential in application areas such as biotechnology, virology, and medical diagnostics. Reflected by the growing number of articles published over the last 2-3 years, these techniques have also gained attention in the forensic field. This review contains a brief description of first, second, and third generation sequencing techniques, and focuses on the recent developments in human DNA analysis applicable in the forensic field. Relevance to the forensic analysis is that besides generation of standard STR-profiles, DNA repeats can also be sequenced to look for polymorphisms. Furthermore, additional SNPs can be sequenced to acquire information on ancestry, paternity or phenotype. The current MPS systems are also very helpful in cases where only a limited amount of DNA or highly degraded DNA has been secured from a crime scene. If enough autosomal DNA is not present, mitochondrial DNA can be sequenced for maternal lineage analysis. These developments clearly demonstrate that the use of NGS will grow into an indispensable tool for forensic science.

FDA authorized molecular point-of-care SARS-CoV-2 tests: A critical review on principles, systems and clinical performances.

Since the start of the COVID-19 pandemic, 10 manufacturers of molecular tests for SARS-CoV-2 have received Emergency Use Authorizations from the U.S. Food and Drug Administration for point-of-care or over the counter use. In this review, the working principle of these tests is described as well as the relevant characteristics (e.g. time-to-result and specimen type). The analytical (e.g. analytical sensitivity) and clinical performance (positive and negative percent agreement) and useability characteristics (e.g. cost, reusability and throughput) of these tests are compared and critically reviewed. Also details for relevant respiratory multiplex assays of these 10 manufacturers are discussed. Critical review of scientific literature on these authorized tests revealed that for many of these tests publications are almost or completely absent, with the exception of two systems. The Xpert Xpress has been thoroughly investigated and good performance has been reported, whereas ID NOW is also well-represented in literature, but has relatively low sensitivity.

Cyclic Olefin Copolymer Microfluidic Devices for Forensic Applications.

Microfluidic devices offer important benefits for forensic applications, in particular for fast tests at a crime scene. A large portion of forensic applications require microfluidic chip material to show compatibility with biochemical reactions (such as amplification reactions), and to have high transparency in the visible region and high chemical resistance. Also, preferably, manufacturing should be simple. The characteristic properties of cyclic olefin copolymer (COC) fulfills these requirements and offers new opportunities for the development of new forensic tests. In this work, the versatility of COC as material for lab-on-a-chip (LOC) systems in forensic applications has been explored by realizing two proof-of-principle devices. Chemical resistance and optical transparency were investigated for the development of an on-chip presumptive color test to indicate the presence of an illicit substance through applying absorption spectroscopy. Furthermore, the compatibility of COC with a DNA amplification reaction was verified by performing an on-chip multiple displacement amplification (MDA) reaction.

The Extraction and Recovery Efficiency of Pure DNA for Different Types of Swabs.

The extraction and recovery efficiency of swabs used to collect evidence at crime scenes is relatively low (typically <50%) for bacterial spores and body fluids. Cell-free deoxyribonucleic acid (DNA) is an interesting alternative compared to whole cells as a source for forensic analysis, but extraction and recovery from swabs has not been tested before using pure DNA. In this study cotton, foam, nylon flocked, polyester and rayon swabs are investigated in order to collect pure DNA isolated from saliva samples. The morphology and absorption capacity of swabs is studied. Extraction and recovery efficiencies are determined and compared to the maximum theoretical efficiency. The results indicate that a substantial part of DNA is not extracted from the swab and some types of swab seem to bind effectively with DNA. The efficiency of the different types of swab never exceeds 50%. The nylon flocked 4N6FLOQSwab used for buccal sampling performs the best.

Dataset of the absorption, emission and excitation spectra and fluorescence intensity graphs of fluorescent cyanine dyes for the quantification of low amounts of dsDNA.

This article describes data related to a research article entitled "Fluorescent cyanine dyes for the quantification of low amounts of dsDNA" (B. Bruijns, R. Tiggelaar, J. Gardeniers, 2016) [1]. Six cyanine dsDNA dyes - EvaGreen, SYBR Green, PicoGreen, AccuClear, AccuBlue NextGen and YOYO-1 - are investigated and in this article the absorption spectra, as well as excitation and emission spectra, for all six researched cyanine dyes are given, all recorded under exactly identical experimental conditions. The intensity graphs, with the relative fluorescence in the presence of low amounts of dsDNA, are also provided.

Microfluidic Devices for Forensic DNA Analysis: A Review.

Microfluidic devices may offer various advantages for forensic DNA analysis, such as reduced risk of contamination, shorter analysis time and direct application at the crime scene. Microfluidic chip technology has already proven to be functional and effective within medical applications, such as for point-of-care use. In the forensic field, one may expect microfluidic technology to become particularly relevant for the analysis of biological traces containing human DNA. This would require a number of consecutive steps, including sample work up, DNA amplification and detection, as well as secure storage of the sample. This article provides an extensive overview of microfluidic devices for cell lysis, DNA extraction and purification, DNA amplification and detection and analysis techniques for DNA. Topics to be discussed are polymerase chain reaction (PCR) on-chip, digital PCR (dPCR), isothermal amplification on-chip, chip materials, integrated devices and commercially available techniques. A critical overview of the opportunities and challenges of the use of chips is discussed, and developments made in forensic DNA analysis over the past 10-20 years with microfluidic systems are described. Areas in which further research is needed are indicated in a future outlook.