Stereoselective Ring Expansion Metathesis Polymerization with Cationic Molybdenum Alkylidyne N-Heterocyclic Carbene Complexes.

Molybdenum alkylidyne N-heterocyclic carbene (NHC) complexes of the type [Mo(C-p-C6H4Y)(OC(R)(CF3)2)2 (L)(NHC)][B(ArF)4] (Y = OMe, NO2; R = CH3, CF3; L = none, pivalonitrile, tetrahydrofuran; NHC = 1,3-dimesitylimidazol-2-ylidene (IMes), 1,3-dimesityl-3,4-dihydroimidazol-2-ylidene (IMesH2), 1,3-dimesityl-3,4-dichloroimidazol-2-ylidene (IMesCl2), 1,3-diisopropylimidazol-2-ylidene (IiPr); B(ArF)4- = tetrakis(3,5-bis(trifluoromethyl)phen-1-yl)borate) were used in the ring expansion metathesis polymerization (REMP) of cyclic olefins. With cis-cyclooctene (cCOE) cyclic, low molecular weight oligomers were obtained at low monomer concentrations and the cyclic nature of the polymer was confirmed by MALDI-TOF measurements. High-molecular weight cyclic poly(cCOE) became available at high monomer concentrations. Also, post-REMP allowed for converting low-molecular-weight cyclic poly(cCOE) into high-molecular-weight cyclic poly(cCOE). Tailored catalysts together with suitable additives offered access to the stereoselective REMP of functional norbornenes providing functional cis-isotactic (cis-it), cis-syndiotactic (cis-st) and trans-it poly(norbornene)s with up to 99% stereoselectivity. Mechanistic details supported by density functional theory (DFT) calculations are outlined.

Mesoionic N-Heterocyclic Olefins as Initiators for the Lewis Pair Polymerization of Epoxides.

Mesoionic N-heterocyclic olefins (mNHOs) have recently emerged as a novel class of highly nucleophilic and super-basic σ-donor compounds. Making use of these properties in synthetic polymer chemistry, it is shown that a combination of a specific mNHO and a Mg-based Lewis acid (magnesium bis(hexamethyldisilazide), Mg(HMDS)2) delivers poly(propylene oxide) in quantitative yields from the polymerization of the corresponding epoxide (0.1 mol% mNHO loading). The initiation mechanism involves monomer activation by the Lewis acid and direct ring-opening of the monomer by nucleophilic attack of the mNHO, forming a zwitterionic propagating species. Modulation of the mNHO properties is thereby a direct tool to impact initiation efficiency, revealing a sterically unencumbered triazole-derivative as particularly useful. The joint application of mNHOs together with borane-type Lewis acids is also outlined, resulting in high conversions and fast polymerization kinetics. Importantly, while molar mass distributions remain relatively broad, indicating faster propagation than initiation, the overall molar masses are significantly lower than found in the case of regular NHOs, underlining the increased nucleophilicity and ensuing improved initiation efficiency of mNHOs.

Neutral and Cationic Molybdenum Imido Alkylidene Cyclic Alkyl Amino Carbene (CAAC) Complexes for Olefin Metathesis.

The first neutral and cationic Mo imido alkylidene cyclic alkyl amino carbene (CAAC) complexes of the general formulae [Mo(N-Ar)(CHCMe2 Ph)(X)2 (CAAC)] and [Mo(N-Ar)(CHCMe2 Ph)(X)(CAAC)][B(ArF )4 ] (X=Br, Cl, OTf, OC6 F5 ; CAAC=1-(2,6-iPr2 -C6 H3 )-3,3,5,5-tetramethyltetrahydropyrrol-2-ylidene) have been synthesized from molybdenum imido bishalide alkylidene DME precursors. Different combinations of the imido and "X" ligands have been employed to understand synthetic peculiarities. Selected complexes have been characterized by single-crystal X-ray analysis. Due to the pronounced σ-donor/π-acceptor characteristics of CAACs, the corresponding neutral and cationic molybdenum imido alkylidene CAAC complexes do not require the presence of stabilizing donor ligands such as nitriles. Calculations on the PBE0-D3BJ/def2-TZVP level for PBE0-D3BJ/def2-SVP optimized geometries revealed partial charges at molybdenum similar to the corresponding molybdenum imido alkylidene N-heterocyclic carbene (NHC) complexes with a slightly higher polarization of the molybdenum alkylidene bond in the CAAC complexes. All cationic complexes have been tested in olefin metathesis reactions and showed improved activity compared to the analogous NHC complexes for hydrocarbon-based substrates, allowing for turnover numbers (TONs) up to 9500 even at room temperature. Some Mo imido alkylidene CAAC complexes are tolerant towards functional groups like thioethers and sulfonamides.

Effect of liquid confinement on regioselectivity in the hydrosilylation of alkynes with cationic Rh(I) N-heterocyclic carbene catalysts.

Polymeric mesoporous monoliths were prepared via ring-opening metathesis polymerization (ROMP) from norbornene (NBE), 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo,endo-dimethanonaphthalene (DMN-H6), tris(norborn-2-enylmethylenoxy)methylsilane and the 1st-generation Grubbs catalyst [RuCl2(PCy3)2(CHC6H5)] in the presence of 2-propanol and toluene and surface grafted with 1-(2-((norborn-5-ene-2-carbonyl)oxy)ethyl)-3-ethyl-1H-imidazol-3-ium tetrafluoroborate. Subsequently, a supported ionic-liquid-phase (SILP) system was created by immobilizing the ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4] with the cationic catalyst [Rh((1-pyrid-1-yl)-3-mesitylimidazol-2-ylidene)(COD)+BF4-] (Rh-1; COD = 1,4-cyclooctadiene) dissolved therein. The regio- and stereoselectivity of Rh-1 dissolved in the IL and supported on the mesoporous monolith, referred to as Rh@SILPROMP, in the hydrosilylation of 1-alkynes with HSiMe2Ph was studied and compared to that of the homogeneous catalyst Rh-1 under biphasic conditions using methyl tert-butyl ether (MTBE) as a second organic phase. Different amounts of IL were used, which allowed for the creation of SILPs with different layer thicknesses. Rh@SILPROMP provided by far better ß-(Z) selectivity for both aromatic and aliphatic 1-alkynes in comparison to Rh-1 used under biphasic conditions. The highest ß-(Z) selectivity was obtained with the thinnest IL layer. No leaching of the IL or rhodium from the SILP system into the organic phase was observed, resulting in virtually metal-free hydrosilylation products. The data obtained with Rh@SILPROMP were also compared with those from previous studies with Rh-1 in the same IL supported on polyurethane-derived mesoporous monolithic supports (Rh@SILPPUR) and on mesoporous SBA-15 (Rh@SILPSBA-15). For the first time, the use of a liquid confinement created by both a SILP and the support itself to tune the transition state of an organometallic catalyst by non-covalent interactions and thus stereo- and regioselectivity is outlined.

Olefin Metathesis in Confinement: Towards Covalent Organic Framework Scaffolds for Increased Macrocyclization Selectivity.

Covalent organic frameworks (COFs) offer vast structural and chemical diversity enabling a wide and growing range of applications. While COFs are well-established as heterogeneous catalysts, so far, their high and ordered porosity has scarcely been utilized to its full potential when it comes to spatially confined reactions in COF pores to alter the outcome of reactions. Here, we present a highly porous and crystalline, large-pore COF as catalytic support in α,ω-diene ring-closing metathesis reactions, leading to increased macrocyclization selectivity. COF pore-wall modification by immobilization of a Grubbs-Hoveyda-type catalyst via a mild silylation reaction provides a molecularly precise heterogeneous olefin metathesis catalyst. An increased macro(mono)cyclization (MMC) selectivity over oligomerization (O) for the heterogeneous COF-catalyst (MMC:O=1.35) of up to 51 % compared to the homogeneous catalyst (MMC:O=0.90) was observed along with a substrate-size dependency in selectivity, pointing to diffusion limitations induced by the pore confinement.

Special Issue on Contemporary Challenges in Catalysis.

This special issue on Contemporary Challenges in Catalysis has been organized by three Collaborative Research Centers funded by the German Research Foundation and covers a wide range of aspects and challenges of catalytic research, as described in the Editorial by M. Buchmeiser.

Rh(I)/(III)-N-Heterocyclic Carbene Complexes: Effect of Steric Confinement Upon Immobilization on Regio- and Stereoselectivity in the Hydrosilylation of Alkynes.

Rh(I) NHC and Rh(III) Cp* NHC complexes (Cp*=pentamethylcyclopentadienyl, NHC=N-heterocyclic carbene=pyrid-2-ylimidazol-2-ylidene (Py-Im), thiophen-2-ylimidazol-2-ylidene) are presented. Selected catalysts were selectively immobilized inside the mesopores of SBA-15 with average pore diameters of 5.0 and 6.2 nm. Together with their homogenous progenitors, the immobilized catalysts were used in the hydrosilylation of terminal alkynes. For aromatic alkynes, both the neutral and cationic Rh(I) complexes showed excellent reactivity with exclusive formation of the ß(E)-isomer. For aliphatic alkynes, however, selectivity of the Rh(I) complexes was low. By contrast, the neutral and cationic Rh(III) Cp* NHC complexes proved to be highly regio- and stereoselective catalysts, allowing for the formation of the thermodynamically less stable ß-(Z)-vinylsilane isomers at room temperature. Notably, the SBA-15 immobilized Rh(I) catalysts, in which the pore walls provide an additional confinement, showed excellent ß-(Z)-selectivity in the hydrosilylation of aliphatic alkynes, too. Also, in the case of 4-aminophenylacetylene, selective formation of the ß(Z)-isomer was observed with a neutral SBA-15 supported Rh(III) Cp* NHC complex but not with its homogenous counterpart. These are the first examples of high ß(Z)-selectivity in the hydrosilylation of alkynes by confinement generated upon immobilization inside mesoporous silica.

Cationic Group VI Metal Imido Alkylidene N-Heterocyclic Carbene Nitrile Complexes: Bench-Stable, Functional-Group-Tolerant Olefin Metathesis Catalysts.

Despite their excellent selectivities and activities, Mo-and W-based catalysts for olefin metathesis have not gained the same widespread use as Ru-based systems, mainly due to their inherent air sensitivity. Herein, we describe the synthesis of air-stable cationic-at-metal molybdenum and tungsten imido alkylidene NHC nitrile complexes. They catalyze olefin metathesis reactions of substrates containing functional groups such as (thio-) esters, (thio-) ethers and alcohols without the need for prior activation, for example, by a Lewis acid. The presence of a nitrile ligand was found to be essential for their stability towards air, while no decrease in activity and productivity could be observed upon coordination of a nitrile. Variations of the imido and anionic ligand revealed that alkoxide complexes with electron-withdrawing imido ligands offer the highest reactivities and excellent stability compared to analogous triflate and halide complexes.

Reversible N-Heterocyclic Carbene-Induced α-H Abstraction in Tungsten(VI) Imido Dialkyl Dialkoxide Complexes.

The first reversible N-heterocyclic carbene (NHC) induced α-H abstraction in tungsten(VI) imido-dialkyl dialkoxide complexes is reported. Treatment of W(NAr)(CH2 Ph)2 (OtBu)2 (Ar=2,6-dichlorophenyl, 2,6-dimethylphenyl, 2,6-diisopropylphenyl) with different NHCs leads to the formation of complexes of the type W(NAr)(CHPh)(NHC)(CH2 Ph)(OtBu) in excellent isolated yields of up to 96 %. The highly unusual release of the tert-butoxide ligand as tBuOH in the course of the reaction was observed. The formed alkylidene complexes and tBuOH are in an equilibrium with the NHC and the dialkyl complexes. Reaction kinetics were monitored by 1 H NMR spectroscopy. A correlation between the steric and electronic properties of the NHC and the reaction rates was observed. Kinetics of a deuterium-labeled complex in comparison to its non-deuterated counterpart revealed the presence of a strong primary kinetic isotope effect (KIE) of 4.2, indicating that α-H abstraction is the rate-determining step (RDS) of the reaction.

A Spirocyclic Parabanic Acid Masked N-Heterocyclic Carbene as Thermally Latent Pre-Catalyst for Polyamide 6 Synthesis and Epoxide Curing.

1,3-Dicyclcohexyl-6,9-dimethyl-1,3,6,9-tetraazaspiro[4.4]non-7-ene-2,4-dione, a spirocyclic parabanic acid derivative of N,N-dimethylimidazole, is used as thermally latent, protected N-heterocyclic carbene (NHC) in polymerizing anhydride-cured epoxide resins, and azepan-2-one, respectively. The protected carbene is synthesized from 1,3-dimethylimidazolium-2-carboxylate in the presence of two equivalents of cyclohexyl isocyanate. In the synthesis of epoxide resin thermosets, this class of latent NHC allows the production of fast and fully cured materials with high crosslinking content. Fast and complete conversion is found in the anionic ring opening polymerization (AROP) of azepan-2-one (ε-caprolactam, CLA) with and without additional activators.

Regio- and Stereospecific Cyclopolymerization of α,ω-Diynes by Cationic Molybdenum Imido Alkylidene N-Heterocyclic Carbene Complexes.

Both solvent-free and acetonitrile-containing cationic molybdenum imido alkylidene N-heterocyclic carbene (NHC) complexes of the general formula [Mo(NR')(CHCMe2 R)(NHC)(X)+ A- ] (R' = 2,6-Cl2 -C6 H3 , tBu, 2-CF3 -C6 H4 , 2-tBu-C6 H4 , 2,6-iPr2 -C6 H3 , 2,6-Me2 -C6 H3 ; R = Me, Ph; NHC = 1,3-dimesitylimidazol-2-ylidene (IMes), 1,3-di-iPr-imidazol-2-ylidene (IPr), 1,3,5-triphenyl-1,3,4-triazol-2-ylidene); X = CF3 SO3 , C6 F5 O, OCH(CF3 )2 , OC(CF3 )3 , pyrrolide, C6 F5 COO, 2,6-(CF3 )2 -C6 H3 COO; A- = B(ArF )4 - , Al(OC(CF3 )3 )4 - ), have been investigated for their propensity to cyclopolymerize 4,4-disubstituted 1,6-heptadiynes. All metal complexes contain a stereogenic (chiral) metal center, which accounts for the high reactivity and high regioselectivity of insertion (>99%) that are observed for all metal complexes, leading to highly conjugated, α-insertion-derived polyenes that are based on a highly regular polymer backbone and that show absorption maxima close to 600 nm. With the chiral monomer 4-(ethoxycarbonyl)-4-(1S,2R,5S)-(-)-menthoxycarbonyl-1,6-heptadiyne, high syndiospecifity (>99% syndiotactic) is observed. A mechanism explaining the high regio- and stereoselectivity is presented. Thus, α-addition of the monomers proceeds chain-end-controlled trans to the NHC and is preferred over ß-addition through intramolecular Mo-O chelation. Insertion of the monomers entails double inversion at the stereogenic metal center in the course of one complete monomer insertion.

Origin and Use of Hydroxyl Group Tolerance in Cationic Molybdenum Imido Alkylidene N-Heterocyclic Carbene Catalysts.

The origin of hydroxyl group tolerance in neutral and especially cationic molybdenum imido alkylidene N-heterocyclic carbene (NHC) complexes has been investigated. A wide range of catalysts was prepared and tested. Most cationic complexes can be handled in air without difficulty and display an unprecedented stability towards water and alcohols. NHC complexes were successfully used with substrates containing the hydroxyl functionality in acyclic diene metathesis polymerization, homo-, cross and ring-opening cross metathesis reactions. The catalysts remain active even in 2-PrOH and are applicable in ring-opening metathesis polymerization and alkene homometathesis using alcohols as solvent. The use of weakly basic bidentate, hemilabile anionic ligands such as triflate or pentafluorobenzoate and weakly basic aromatic imido ligands in combination with a sterically demanding 1,3-dimesitylimidazol-2-ylidene NHC ligand was found essential for reactive and yet robust catalysts.

Mechanism of Olefin Metathesis with Neutral and Cationic Molybdenum Imido Alkylidene N-Heterocyclic Carbene Complexes.

A series of neutral molybdenum imido alkylidene N-heterocyclic carbene (NHC) bistriflate and monotriflate monoalkoxide complexes as well as cationic molybdenum imido alkylidene triflate complexes have been subjected to NMR spectroscopic, X-ray crystallographic, and reaction kinetic measurements in order to gain a comprehensive understanding about the underlying mechanism in olefin metathesis of this new type of catalysts. On the basis of experimental evidence and on DFT calculations (BP86/def2-TZVP/D3/cosmo) for the entire mechanism, olefinic substrates coordinate trans to the NHC of neutral 16-electron complexes via an associative mechanism, followed by dissociation of an anionic ligand (e.g., triflate) and formation of an intermediary molybdacyclobutane trans to the NHC. Formation of a cationic complex is crucial in order to become olefin metathesis active. Variations in the NHC, the imido, the alkoxide, and the noncoordinating anion revealed their influence on reactivity. The reaction of neutral 16-electron complexes with 2-methoxystyrene is faster for catalysts bearing one triflate and one fluorinated alkoxide than for catalysts bearing two triflate ligands. This is also reflected by the Gibbs free energy values for the transition states, Δ G‡303, which are significantly lower for catalysts bearing only one triflate than for the corresponding bistriflate complexes. Reaction of a solvent-stabilized cationic molybdenum imido alkylidene N-heterocyclic carbene (NHC) monotriflate complex with 2-methoxystyrene proceeded via an associative mechanism too. Reaction rates of both solvent-free and solvent-stabilized cationic Mo imido alkylidene NHC catalysts with 2-methoxystyrene are controlled by the cross-metathesis step but not by adduct formation.

Olefin Metathesis in Confined Geometries: A Biomimetic Approach toward Selective Macrocyclization.

The synthesis of macrocycles is severely impeded by concomitant oligomer formation. Here, we present a biomimetic approach that utilizes spatial confinement to increase macrocyclization selectivity in the ring-closing metathesis of various dienes at elevated substrate concentration up to 25 mM using an olefin metathesis catalyst selectively immobilized inside ordered mesoporous silicas with defined pore diameters. By this approach, the ratio between macro(mono)cyclization (MMC) product and all undesired oligomerization products (O) resulting from acyclic diene metathesis polymerization was increased from 0.55, corresponding to 35% MMC product obtained with the homogeneous catalyst, up to 1.49, corresponding to 60% MMC product. A correlation between the MMC/O ratio and the substrate-to-pore-size ratio was successfully established. Modification of the inner pore surface with dimethoxydimethylsilane allowed fine-tuning the effective pore size and reversing surface polarity, which resulted in a further increase of the MMC/O ratio up to 2.2, corresponding to >68% MMC product. Molecular-level simulations in model pore geometries help to rationalize the complex interplay between spatial confinement, specific (substrate and product) interaction with the pore surface, and diffusive transport. These effects can be synergistically adjusted for optimum selectivity by suitable surface modification.

Functional Precision Polymers via Stereo- and Regioselective Polymerization Using Group 6 Metal Alkylidene and Group 6 and 8 Metal Alkylidene N-Heterocyclic Carbene Complexes.

The concepts of functional precision polymers and the latest accomplishments in their synthesis are summarized. Synthetic concepts based on chain growth polymerization are compared to iterative synthetic approaches. Here, the term "functional precision polymers" refers to polymers that are not solely hydrocarbon-based but contain functional groups and are characterized by a highly ordered primary structure. If insertion polymerization is used for their synthesis, olefin metathesis-based polymerization techniques, that is, ring-opening metathesis polymerization (ROMP), acyclic diene metathesis (ADMET) polymerization, and the regio- and stereoselective cyclopolymerization of α,ω-diynes are almost exclusively applied. Particularly with regio- and stereospecific ROMP and with cyclopolymerization, the synthesis of tactic polymers and copolymers with high regio-, stereo-, and sequence control can be accomplished; however, it requires carefully tailored transition metal catalysts. The fundamental synthetic concepts and strategies are outlined.

Molybdenum Imido, Tungsten Imido and Tungsten Oxo Alkylidene N-Heterocyclic Carbene Olefin Metathesis Catalysts.

This article outlines the fundamental concept to molybdenum imido, tungsten imido and tungsten oxo alkylidene N-heterocyclic carbene (NHC) catalysts for olefin metathesis. Starting from Mo(NR)(CHCMe2 R')(OTf)2 ⋅DME (R=alkyl, aryl; R'=CH3 , Ph; OTf=CF3 SO3 ; DME=1,2-dimethoxyethane), W(NR)(CHCMe2 Ph)X2 (X=pyrrolide, OR'', SiPh3 ) and W(O)Cl2 (CHCMe2 Ph)(PMe2 Ph)2 , respectively, the neutral, pentacoordinated 16-valence electron (VE) complexes became accessible. These serve as precursors for the corresponding cationic, tetracoordinated 14-VE catalysts. This class of olefin metathesis catalysts based on group 6 metal alkylidene NHCs is characterized by a broad structural variability, high activity, high productivity and, in tailored systems, high functional group tolerance even vs. protic groups including alcohols and carboxylic acids. Also, high regio- and stereoselectivity is achieved, both in ring-opening metathesis polymerization (ROMP) and in the cyclopolymerization of α,ω-diynes. Fundamentals concerning the influence of the imido/oxo ligand, the different NHCs and the anionic ligands on catalyst performance and stability as well as reaction pathways are summarized. Also, the concepts for catalyst immobilization, whether via the NHC or by substitution of an alkoxide, are presented. Finally, special features such as the use of betaine-type anionic ligands (alkoxides and sulfonates), which offer access to ionic catalysts for use biphasic reaction setups, are briefly outlined.

Mono- and Bisionic Mo- and W-Based Schrock Catalysts for Biphasic Olefin Metathesis Reactions in Ionic Liquids.

An extensive series of the first ionic Mo- and W-based Schrock-type catalysts based on pyridinium and phosphonium tagged aryloxide ligands were prepared. Bisionic complexes of the general formula Mo(Imido)(CHR)(OR')2 (OTf)2 and monoionic monoaryloxide pyrrolide (pyr) (MAP-type) catalysts [M(Imido)(CHR)(OR')(pyr)+ ][A- ] were successfully employed and tested in various olefin metathesis benchmark reactions under both, homogeneous and biphasic conditions using pyrrole and, for the first time with Schrock-type catalysts, ionic liquids as the polar phase. Productivities under biphasic conditions up to several thousand turn overs were achieved and are comparable to those obtained in reactions carried out in chlorobenzene or toluene. Metal contamination in the nonpolar product-containing heptane phase was <2 ppm.

Latent and Air-Stable Pre-Catalysts for the Polymerization of Dicyclopentadiene: From Penta- to Hexacoordination in Molybdenum Imido Alkylidene N-Heterocyclic Carbene Complexes.

The pentacoordinated, 16-valence electron (VE) Mo imido alkylidene N-heterocyclic carbene (NHC) complexes I1-I5 and the hexacoordinated 18-VE Mo imido alkylidene NHC complexes 1-4, 8, 10 and 12 containing a chelating ligand have been prepared and used as thermally latent catalysts in the ring-opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD). Both 10 and 12 are the first Mo imido alkylidene complexes with a chelating alkylidene featuring a carboxylate group. Complexes I1-I3 and I5 as well as 1-4 proved to be fully thermally latent in the presence of DCPD. With the changes in both the electronic and steric situation at the imido ligand provided by these pre-catalysts, different temperatures of the onset of polymerization (Tonset =65-140 °C) and for the exothermic maximum of the curing curve (Texo,max =98-183 °C) of DCPD were achieved. Also, the degree of crosslinking was successfully varied as indicated by swelling experiments in toluene, which revealed degrees of swelling between 0 and 50 %. While the introduction of a chelating alkylidene increases Tonset , the introduction of more electron-donating anionic ligands (tert-butoxide, phenoxide) resulted in a drastic reduction in Tonset , underlining the high flexibility of these systems. The hexacoordinated high-oxidation state molybdenum imido alkylidene NHC complexes 2, 3 and 4 were stable under air for at least twelve hours in the solid state.