Photodegradation of CuBi2 O4 Films Evidenced by Fast Formation of Metallic Bi using Operando Surface-sensitive X-ray Scattering.

CuBi2 O4 has recently emerged as a promising photocathode for photo-electrochemical (PEC) water splitting. However, its fast degradation under operation currently poses a limit to its application. Here, we report a novel method to study operando the semiconductor-electrolyte interface during PEC operation by surface-sensitive high-energy X-ray scattering. We find that a fast decrease in the generated photocurrents correlates directly with the formation of a metallic Bi phase. We further show that the slower formation of metallic Cu, as well as the dissolution of the electrode in contact with the electrolyte, further affect the CuBi2 O4 activity and morphology. Our study provides a comprehensive picture of the degradation mechanisms affecting CuBi2 O4 electrodes under operation and poses the methodological basis to investigate the photocorrosion processes affecting a wide range of PEC materials.

Atomic Layer Deposition of Cobalt Phosphide for Efficient Water Splitting.

Transition-metal phosphides (TMP) prepared by atomic layer deposition (ALD) are reported for the first time. Ultrathin Co-P films were deposited by using PH3 plasma as the phosphorus source and an extra H2 plasma step to remove excess P in the growing films. The optimized ALD process proceeded by self-limited layer-by-layer growth, and the deposited Co-P films were highly pure and smooth. The Co-P films deposited via ALD exhibited better electrochemical and photoelectrochemical hydrogen evolution reaction (HER) activities than similar Co-P films prepared by the traditional post-phosphorization method. Moreover, the deposition of ultrathin Co-P films on periodic trenches was demonstrated, which highlights the broad and promising potential application of this ALD process for a conformal coating of TMP films on complex three-dimensional (3D) architectures.

Direct Electrochemical Synthesis of Metal-Organic Frameworks: Cu3 (BTC)2 and Cu(TCPP) on Copper Thin films and Copper-Based Microstructures.

Cu thin films and Cu2 O microstructures were partially converted to the Metal-Organic Frameworks (MOFs) Cu3 (BTC)2 or Cu(TCPP) using an electrochemical process with a higher control and at milder conditions compared to the traditional solvothermal MOF synthesis. Initially, either a Cu thin film was sputtered, or different kinds of Cu or Cu2 O microstructures were electrochemically deposited onto a conductive ITO glass substrate. Then, these Cu thin films or Cu-based microstructures were subsequently coated with a thin layer of either Cu3 (BTC)2 or Cu(TCPP) by controlled anodic dissolution of the Cu-based substrate at room temperature and in the presence of the desired organic linker molecules: 1,3,5-benzenetricarboxylic acid (BTC) or photoactive 4,4',4'',4'''-(Porphine-5,10,15,20-tetrayl) tetrakis(benzoic acid) (TCPP) in the electrolyte. An increase in size of the Cu micro cubes with exposed planes [100] of 38,7 % for the Cu2 O@Cu3 (BTC)2 and a 68,9 % increase for the Cu2 O@Cu(TCPP) was roughly estimated. Finally, XRD, Raman spectroscopy and UV-vis absorption spectroscopy were used to characterize the initial Cu films or Cu-based microstructures, and the obtained core-shell Cu2 O@Cu(BTC) and Cu2 O@Cu(TCPP) microstructures.

Multiplex signal amplification for ultrasensitive CRP assay via integrated electrochemical biosensor array using MOF-derived carbon material and aptamers.

Accurate and precise detection of disease-associated proteins, such as C-reactive protein (CRP), remains a challenge in biosensor development. Herein, we present a novel approach－an integrated disposable aptasensor array－designed for precise, ultra-sensitive, and parallel detection of CRP in plasma samples. This integrated biosensing array platform enables multiplex parallel testing, ensuring the accuracy and reliability in sample analysis. The ultra-sensitivity of this biosensor is achieved through multiplex signal amplification. Leveraging the superior conductivity and extensive surface area of MOF-derived nanoporous carbon material (CMOF), the biosensor enhances recognition elements (aptamers) by catalyzing the horseradish peroxidase (HRP) label enzyme reaction to multiply the number of probe molecules. Optimized conditions yielded exceptional performance, exhibiting high accuracy (relative standard deviation, RSD≤10.0 %), a low detection limit (0.3 pg/mL, S/N = 3), ultra-sensitivity (0.16 µA/ng mL-1 mm-2), and a rapid response (seven parallel tests within 60 min). Importantly, this multi-unit integrated disposable aptasensor array accurately quantified CRP in human serum, demonstrating comparable results to commercial enzyme-linked immunosorbent assay (ELISA). This technology showcases promise for detecting various biomarkers using a unified approach, presenting an appealing strategy for early disease diagnosis and biological analysis.

An OFF-ON chemosensor for biological and environmental applications: sensing Cd2+ in water using catanionic vesicles and in living cells.

A new OFF-ON fluorescent chemosensor (L(1)) for Cd(2+) recognition based on a 5-chloro-8-hydroxyquinoline pendant arm derivative of 1,4,7-triazacyclononane ([9]aneN3) will be presented and its photochemical features in an MeCN-H2O 1 : 1 (v/v) mixture, in pure water, after inclusion within catanionic vesicles, and in living cells will be discussed. The coordination properties of L(1) both in solution and in the solid state were preliminarily studied and its selectivity towards Cd(2+)versus a set of different metal ions (Cu(2+), Zn(2+), Cd(2+), Pb(2+), Al(3+), Hg(2+), Co(2+), Ni(2+), Mn(2+), Mg(2+), K(+), Ca(2+), Ag(+), and Na(+)) was verified in MeCN-H2O 1 : 1 (v/v). In water, upon addition of increasing amounts of Cd(2+) to L(1) an enhancement of the fluorescence emission was detected. To overcome this serious drawback, L(1) was dissolved in an innovative catanionic vesicular solution based on sodium bis(2-ethylhexyl) sulfosuccinate, a traditional surfactant, and 1-dodecyl-3-methylimidazolium bromide, an ionic liquid. When enclosed within the vesicle bilayers in water, L(1) restored its fluorescence emission property upon addition of Cd(2+). Remarkably, L(1) enters the cellular membrane of living cells thus allowing the detection of intracellular Cd(2+). These findings encourage the application of this new fluorescent chemosensor in real samples for histological and environmental analyses.

Sensitive electrochemical assay of acetaminophen based on 3D-hierarchical mesoporous carbon nanosheets.

Acetaminophen plays a key role in first-line Covid-19 cure as a supportive therapy of fever and pain. However, overdose of acetaminophen may give rise to severe adverse events such as acute liver failure in individual. In this work, 3D-hierarchical mesoporous carbon nanosheet (hMCNS) microspheres with superior properties were fabricated using simple and quick strategy and applied for sensitive quantification of acetaminophen in pharmaceutical formulation and rat plasmas after administration. The hMCNS microspheres are prepared via chemical etching of zinc oxide (ZnO) nanoparticles from a zinc-gallic acid precursor composite (Zn-GA) synthesized by high-temperature anaerobic pyrolysis. The obtained hMCNS could enhance analytes accessibility and accelerate proton transfer in the interface, hence increasing the electrochemical performance. Under optimized experimental conditions, the proposed electrochemical sensor achieves a detection limit of 3.5 nM for acetaminophen. The prepared electrochemical sensor has been successfully applied for quantification of acetaminophen in pharmaceutical formulations and the rat plasma samples before and after administration. Meanwhile, this sensor is compared with high-performance liquid chromatography (HPLC) as a reference technology, showing an excellent accuracy. Such an electrochemical sensor has great potential and economic benefits for applications in the fields of pharmaceutical assay and therapeutic drug monitoring (TDM).

Coating the surface of interconnected Cu2O nanowire arrays with HKUST-1 nanocrystals via electrochemical oxidation.

Controlling the crystallization of Metal-Organic Frameworks (MOFs) at the nanoscale is currently challenging, and this hinders their utilization for multiple applications including photo(electro)chemistry and sensors. In this work, we show a synthetic protocol that enables the preparation of highly homogeneous Cu2O@MOF nanowires standing on a conductive support with extensive control over the crystallization of the MOF nanoparticles at the surface of the Cu2O nanowires. Cu2O nanowires were first prepared via templated electrodeposition, and then partially converted into the well-known Cu-MOF HKUST-1 by pulsed electrochemical oxidation. We show that the use of PVP as a capping agent during the electrochemical oxidation of Cu2O into HKUST-1 provides control over the growth of the MOF nanocrystals on the surface of the Cu2O nanowires, and that the size of the MOF crystals obtained can be tuned by changing the concentration of PVP dissolved in the electrolyte. In addition, we propose the use of benzoic acid as an alternative to achieve control over the size of the obtained MOF nanocrystals when the use of a capping agent should be avoided.

Magnetic Study of CuFe2O4-SiO2 Aerogel and Xerogel Nanocomposites.

CuFe2O4 is an example of ferrites whose physico-chemical properties can vary greatly at the nanoscale. Here, sol-gel techniques are used to produce CuFe2O4-SiO2 nanocomposites where copper ferrite nanocrystals are grown within a porous dielectric silica matrix. Nanocomposites in the form of both xerogels and aerogels with variable loadings of copper ferrite (5 wt%, 10 wt% and 15 wt%) were synthesized. Transmission electron microscopy and X-ray diffraction investigations showed the occurrence of CuFe2O4 nanoparticles with average crystal size ranging from a few nanometers up to around 9 nm, homogeneously distributed within the porous silica matrix, after thermal treatment of the samples at 900 °C. Evidence of some impurities of CuO and α-Fe2O3 was found in the aerogel samples with 10 wt% and 15 wt% loading. DC magnetometry was used to investigate the magnetic properties of these nanocomposites, as a function of the loading of copper ferrite and of the porosity characteristics. All the nanocomposites show a blocking temperature lower than RT and soft magnetic features at low temperature. The observed magnetic parameters are interpreted taking into account the occurrence of size and interaction effects in an ensemble of superparamagnetic nanoparticles distributed in a matrix. These results highlight how aerogel and xerogel matrices give rise to nanocomposites with different magnetic features and how the spatial distribution of the nanophase in the matrices modifies the final magnetic properties with respect to the case of conventional unsupported nanoparticles.

Luminescent gold-thallium derivatives with a pyridine-containing 12-membered aza-thioether macrocycle.

The coordination modes of the ligand 2,5,8-trithia[9](2,6)pyridinophane (L) to thallium(i), gold(iii) and gold(i) have been studied. Thallium(i) is coordinated by the macrocyclic ligand in [Tl(L)](PF6) (1) through all the sulfur and nitrogen atoms, in a distorted square-pyramidal geometry with the thallium(i) ion in the apical position and with the presence of an inert lone pair. Gold(iii) is bonded by the ligand only through the nitrogen of the pyridine group in [AuCl3(L)] (2), whereas two AuI-C6F5 fragments coordinate the sulfur atoms next to the pyridine moiety of the ligand in [{Au(C6F5)}2(µ-L)] (3), which form a linear polymer through intermolecular aurophilic contacts. The heterometallic TlI/AuI complex {[Au(C6F5)2Tl]2(L)}n (4) features a polymeric structural nature with a metallic pseudo-rhombic Au2Tl2 core, which repeats itself forming a zig-zag polymer. In each Au2Tl2 unit only one thallium atom is bonded by the NS3 donor set of the macrocyclic ligand and also forms two unsupported Au-Tl bonds with two [Au(C6F5)2]- units in an overall pseudo-octahedral geometry. The other thallium atom similarly bridges the same [Au(C6F5)2]- units and links a neighbouring Au2Tl2 moiety, thus exhibiting a distorted trigonal planar geometry being bonded only to three gold atoms with unsupported Au-Tl interactions. This complex displays an interesting thermochromic behaviour showing emissions mainly resulting from MM'CT transitions at room temperature. At 77 K a dual emission appears, probably arising from the two different thallium environments. DFT calculations have been carried out in the attempt to investigate the origin of the emissions of complex 4.

Thermally stable surfactant-free ceria nanocubes in silica aerogel.

Surfactant-mediated chemical routes allow one to synthesize highly engineered shape- and size-controlled nanocrystals. However, the occurrence of capping agents on the surface of the nanocrystals is undesirable for selected applications. Here, a novel approach to the production of shape-controlled nanocrystals which exhibit high thermal stability is demonstrated. Ceria nanocubes obtained by surfactant-mediated synthesis are embedded inside a highly porous silica aerogel and thermally treated to remove the capping agent. Powder X-ray Diffraction and Scanning Transmission Electron Microscopy show the homogeneous dispersion of the nanocubes within the aerogel matrix. Remarkably, both the size and the shape of the ceria nanocubes are retained not only throughout the aerogel syntheses but also upon thermal treatments up to 900 °C, while avoiding their agglomeration. The reactivity of ceria is measured by in situ High-Energy Resolution Fluorescence Detected - X-ray Absorption Near Edge Spectroscopy at the Ce L3 edge, and shows the reversibility of redox cycles of ceria nanocubes when they are embedded in the aerogel. This demonstrates that the enhanced reactivity due to their prominent {100} crystal facets is preserved. In contrast, unsupported ceria nanocubes begin to agglomerate as soon as the capping agent decomposes, leading to a degradation of their reactivity already at 275 °C.

Growing CeO2 Nanoparticles Within the Nano-Porous Architecture of the SiO2 Aerogel.

In this study, new CeO2-SiO2 aerogel nanocomposites obtained by controlled growth of CeO2 nanoparticles within the highly porous matrix of a SiO2 aerogel are presented. The nanocomposites have been synthesized via a sol-gel route, employing cerium (III) nitrate as the CeO2 precursor and selected surfactants to control the growth of the CeO2 nanoparticles, which occurs during the supercritical drying of the aerogels. Samples with different loading of the CeO2 dispersed phase, ranging from 5 to 15%, were obtained. The nanocomposites showed the morphological features typical of the SiO2 aerogels such as open mesoporosity with surface area values up to 430 m2·g-1. TEM and XRD characterizations show that nanocrystals of the dispersed CeO2 nanophase grow within the aerogel already during the supercritical drying process, with particle sizes in the range of 3 to 5 nm. TEM in particular shows that the CeO2 nanoparticles are well-distributed within the aerogel matrix. We also demonstrate the stability of the nanocomposites under high temperature conditions, performing thermal treatments in air at 450 and 900°C. Interestingly, the CeO2 nanoparticles undergo a very limited crystal growth, with sizes up to only 7 nm in the case of the sample subjected to a 900°C treatment.

Tuning the Size and Shape of NanoMOFs via Templated Electrodeposition and Subsequent Electrochemical Oxidation.

The control over the size and shape of nanoMOFs is essential for their exploitation in integrated devices such as sensors, membranes for gas separation, photoelectrodes, etc. Here, we demonstrate the synthesis of nanowires and three-dimensionally interconnected nanowire networks of Cu-based metal-organic frameworks (MOFs) by a combination of ion-track technology and electrochemical methods. In particular, Cu nanowires and nanowire networks were electrodeposited inside polymeric etched ion-track membranes and subsequently converted by electrochemical oxidation into different Cu-based MOFs such as the well-known Cu3(BTC)2 (also known as HKUST-1) and the lesser-known MOF Cu(INA)2. The MOFs are formed inside the template, therefore adopting the shape of the host nanochannels. The synthesized MOF nanowires exhibit tunable diameters between 80 and 260 nm. Characterization by X-ray diffraction, thermogravimetric analysis/differential scanning calorimetry, scanning electron microscopy, and transmission electron microscopy indicates that the employed electrochemical conversion includes the formation of Cu2O as an intermediate, as well as the initial formation of an amorphous MOF phase, which crystallizes upon longer reaction times.

Controlling the {111}/{110} Surface Ratio of Cuboidal Ceria Nanoparticles.

The ability to control the size and morphology is crucial in optimizing nanoceria catalytic activity as this is governed by the atomistic arrangement of species and structural features at the surfaces. Here, we show that cuboidal cerium oxide nanoparticles can be obtained via microwave-assisted hydrothermal synthesis in highly alkaline media. High-resolution transmission electron microscopy (HRTEM) revealed that the cube edges were truncated by CeO2{110} surfaces and the cube corners were truncated by CeO2{111} surfaces. When adjusting synthesis conditions by increasing NaOH concentration, the average particle size increased. Although this was accompanied by an increase of the cube faces, CeO2{100}, the cube edges, CeO2{110}, and cube corners, CeO2{111}, remained of constant size. Molecular dynamics (MD) was used to rationalize this behavior and revealed that energetically, the corners and edges cannot be atomically sharp, rather they are truncated by {111} and {110} surfaces, respectively, to stabilize the nanocube; both the experiment and simulation showed agreement regarding the minimum size of ∼1.6 nm associated with this truncation. Moreover, HRTEM and MD revealed {111}/{110} faceting of the {110} edges, which balances the surface energy associated with the exposed surfaces, which follows {111} > {110} > {100}, although only the {110} surface facets because of the ease of extracting oxygen from its surface and follows {111} > {100} > {110}. Finally, MD revealed that the {100} surfaces are "liquid-like" with a surface oxygen mobility 5 orders of magnitude higher than that on the {111} surfaces; this arises from the flexibility of the surface species network that can access many different surface arrangements because of very small energy differences. This finding has implications for understanding the surface chemistry of nanoceria and provides avenues to rationalize the design of catalytically active materials at the nanoscale.

Evidence of a cubic iron sub-lattice in t-CuFe2O4 demonstrated by X-ray Absorption Fine Structure.

Copper ferrite, belonging to the wide and technologically relevant class of spinel ferrites, was grown in the form of t-CuFe2O4 nanocrystals within a porous matrix of silica in the form of either an aerogel or a xerogel, and compared to a bulk sample. Extended X-ray absorption fine structure (EXAFS) spectroscopy revealed the presence of two different sub-lattices within the crystal structure of t-CuFe2O4, one tetragonal and one cubic, defined by the Cu2+ and Fe3+ ions respectively. Our investigation provides evidence that the Jahn-Teller distortion, which occurs on the Cu2+ ions located in octahedral sites, does not affect the coordination geometry of the Fe3+ ions, regardless of their location in octahedral or tetrahedral sites.

Origin of electrochemical activity in nano-Li2MnO3; stabilization via a 'point defect scaffold'.

Molecular dynamics (MD) simulations of the charging of Li2MnO3 reveal that the reason nanocrystalline-Li2MnO3 is electrochemically active, in contrast to the parent bulk-Li2MnO3, is because in the nanomaterial the tunnels, in which the Li ions reside, are held apart by Mn ions, which act as a pseudo 'point defect scaffold'. The Li ions are then able to diffuse, via a vacancy driven mechanism, throughout the nanomaterial in all spatial dimensions while the 'Mn defect scaffold' maintains the structural integrity of the layered structure during charging. Our findings reveal that oxides, which comprise cation disorder, can be potential candidates for electrodes in rechargeable Li-ion batteries. Moreover, we propose that the concept of a 'point defect scaffold' might manifest as a more general phenomenon, which can be exploited to engineer, for example, two or three-dimensional strain within a host material and can be fine-tuned to optimize properties, such as ionic conductivity.