Optimization of sample treatment for the identification of anthraquinone dyes by surface-enhanced Raman spectroscopy.

The study and characterization of old artifacts such as pigments requires the use of techniques that need a small amount of sample to perform the analysis because of the high value of these samples. In recent years, organic molecules such as anthraquinone dyes have been identified by surface-enhanced Raman spectroscopy (SERS). However, different sample treatments must be applied to isolate the organic dye from the mordant, which produces great fluorescence in the Raman measurements. In this work, optimization of sample treatment for the SERS analysis of anthraquinone dyes was performed. Sample mass, the organic solvent, and its volume were optimized and different slide materials and excitation lasers were compared to choose the best conditions for the identification of the dyes. The optimization of sample treatment resulted in 5 mg of sample as the optimum amount. Further, two consecutive extractions with 0.5 mL of ethyl acetate was the best option for the extraction of the dye. A quartz slide was used instead of a glass slide to reduce background signal, and an excitation laser of 532 nm offers better results than one of 785 nm. The optimized method was applied to the characterization of the dyes used in Pompeian pink and purple lake pigments. Alizarin and purpurin anthraquinone dyes, obtained from madder lake, were identified as the organic colorants. The SERS results were confirmed by those obtained by means of UV-visible spectroscopy. Graphical Abstract ᅟ.

SERS study on the aggregation mechanisms resulting from the orientation of dipyridinic derivatives on gold nanoparticles.

In this work, was studied the adsorption and orientation of three dipyridinic derivatives 9,10-bis-((E)-2-(pyridin-4-yl)vinyl)anthracene (DPAC), 1,4-bis-((E)-2-(pyridin-4-yl)vinyl)naphthalene (DPNA-T) and 2,6-bis-((E)-2-(pyridin-4-yl)vinyl)naphthalene (DPNA-L) on gold nanoparticles, using Surface Enhanced Raman Scattering (SERS). Systematic modification in the shapes of the bifunctional systems (Cross-shape, T-shape and Linear-shape) shows changes significant in the preferential orientation of these analytes on the nanostructured gold surface. Additional data from UV-vis measurements and TEM images are in agreement with the Reaction Limited Colloid Aggregation (RLCA) mechanisms for DPAC and DPNA-T and Diffusion Limited Colloid Aggregation (DLCA) mechanisms for DPNA-L, showing that for the same analyte concentration, the aggregation mechanism depends on the molecular shape. These results allow us to rationalize the fundamental aspects involved in the development of devices based on plasmonic resonance with potential applications in the field of molecular electronics.

Vibrational and electronic spectroscopic detection and quantification of carminic acid in candies.

Carminic acid (CA) contained in one kind of gummy candy was detected and quantified by using vibrational and electronic spectroscopy, respectively; the proposed methodology in solution is simple and rapid without sample pretreatment as usually used and reported. The identification of CA in candies was performed through the Raman and surface enhanced Raman scattering (SERS) spectra along with the equivalent spectral data from the natural CA dye. A modified silver colloidal solution was used in order to obtain SERS activity of CA at very low concentration in colloidal aqueous solution. Theoretical calculations allow infer about both the CA/silver surface interaction nature and on the orientation of CA on the surface. The electronic spectroscopic (UV-Vis) data allowed quantify CA in candies; the amount resulted nearly identical to that determined from HPLC traditional measurements. The present results should contribute to the health of children consumers.

Theoretical surface-enhanced Raman spectra study of substituted benzenes I. Density functional theoretical SERS modelling of benzene and benzonitrile.

This paper reports a DFT modelling of SERS spectra for benzene and benzonitrile on the basis of a simple noncoordinate substrate-adsorbate model. Assignment of normal modes was obtained from internal force constants and potential energy distribution matrices and used to identify, according the SERS selection rules, the orientation of the optimized molecules on the metallic surface. Calculated band enhancements are in good agreement with experimental observations. The optimized geometry parameters of the molecule-Ag system, changes of HOMO-LUMO energies are discussed to give insight in the different SERS mechanisms for both molecules.

Theoretical surface-enhanced Raman spectra study of substituted benzenes II. Density functional theoretical SERS modelling of o-, m-, and p-methoxybenzonitrile.

The SERS modelling of o-, m-, and p-methoxybenzonitrile has been performed following the same methodology that in Part I. Optimized structure obtained from DFT calculations in a B3LYP-LANL2DZ level of calculation shows different tilted positions for the isomers under study. From correlations obtained by comparison of Raman and SERS spectra concerning geometrical parameters, frequency shifting, change in band intensity, and force constants is possible to give insight about the different effect of the metal surface on these molecules and the structural reasons of this behaviour. Frontier orbital analysis gives further information and reveals a ligand to metal charge transfer mechanism for all isomers, as well as its relative importance.

Er-Doped Nanostructured BaTiO3 for NIR to Visible Upconversion.

Photoluminescent mechanisms in erbium-doped barium titanate nanoparticle systems were studied. Er3+ ions were introduced into the BaTiO3 lattice by the sol-gel method. The resulting Er3+ concentration was between 0% and 5%, with Ba/Ti ratios of 1.008 and 0.993. The stoichiometry of Ba and Ti concentrations in the lattice influenced the doping mechanism and placement of erbium ions in the lattice structure. Our research shows the existence of a strong correlation between Ba/Ti ratios, erbium concentration, phase structure and doping site location on the upconversion photoluminescence mechanisms. Competing upconversion emissions ²H11/2/4S3/2→4I15/2 at 523 and 548 nm respectively and other photoluminescent mechanisms as 4I9/2→4I11/2 around 4000 nm (2500 cm-1) were studied using Raman and emission spectroscopy. The upconversion process is predominant over other photoluminescent decay when the material presents high distortion in the surrounding activator.

Vibrational and scaled quantum chemical study of O,O-dimethyl S-methylcarbamoylmethyl phosphorodithioate, dimethoate.

Infrared and Raman spectra of O,O-dimethyl S-methylcarbamoylmethylphosphorodithioate, dimethoate, have been recorded. Density functional theory, DFT, with the B3LYP functional was used for the optimization of the ground state geometry and simulation of the infrared and Raman spectra of this molecule. Calculated geometrical parameters fit very well with the experimental ones. Based on the recorded data, the DFT results and a normal coordinate analysis based on a scaled quantum mechanical (SQM) force field approach, a complete vibrational assignment was made for the first time.

Raman study of the shockwave effect on collagens.

The Raman spectra (1800-200 cm(-1)) of isolated dried collagen types I and III were recorded at different times after shockwave (SW) application in aqueous media. SWs were applied in a single session. One week after the SW application the vibrational data analysis indicates changes in the conformation of the collagens; orientational changes are also inferred. During the next three weeks collagens tended to recover the conformation and orientation existing before SW application.

Immunodominant role of CCHA subunit of Concholepas hemocyanin is associated with unique biochemical properties.

Hemocyanin, the oxygen transporter metallo-glycoprotein from mollusks, shows strong relationship between its notable structural features and intrinsic immunomodulatory effects. Here we investigated the individual contribution of CCHA and CCHB subunits from Concholepas hemocyanin (CCH) to in vivo humoral immune response and their pre-clinical evaluation as immunotherapeutic agent in a mice bladder cancer model, in relation to their biochemical properties. To this end, subunits were purified and well characterized. Homogeneous subunits were obtained by anionic exchange chromatography, and its purity assessed by electrophoretic and immunochemical methods. While each CCH subunit contains eight functional units showing partial cross reaction, the vibrational spectral analysis showed several spectral differences, suggesting structural differences between them. In addition, we demonstrated differences in the carbohydrate content: CCHA had a 3.6% w/w sugar with both N- and O-linked moieties. In turn, CCHB had a 2.5% w/w sugar with N-linked, while O-linked moieties were nearly absent. Considering these differences, it was not possible to predict a priori whether the immunogenic and immunotherapeutic properties of subunits might be similar. Surprisingly, both subunits by itself induced a humoral response, and showed an antitumor effect in the bladder carcinoma cell line MBT-2. However, when immunologic parameters were analyzed, CCHA showed better efficiency than CCHB. No allergic reactions or any toxic effects were observed in mice treated with CCHA, sustaining its potential therapeutic use. Our study supports that CCHA subunit accounts for the most important features involved in the immunogenicity of CCH, such as better hydrophilicity and higher content of carbohydrates.